[ { "id": "centralgatech-000001", "code": "SURG 2030", "title": "$245.00", "credits": null, "hours": null, "description": "For questions about course-specific fees, please contact the program chair for that program or the Business Office. Liability Insurance Students enrolled in selected programs must also purchase personal liability insurance. These programs include Cosmetology, Barbering, Early Childhood Care and Education, and all medical/health programs. The liability insurance fee must be paid when the student signs up for a class that requires clinical coursework. Failure to pay the liability insurance fee will result in the student not being able to participate in the program. The fee is non-refundable. Please see your advisor for further details concerning this requirement. EMT and Paramedic Programs ............................$46.00 All Other Applicable Programs ............................$11.50 www.centralgatech.edu/tuition Textbooks and Materials It is recommended that students purchase required books, tools, uniforms and other equipment/supplies appropriate to their program of study as outlined in the course syllabus for each program. Books and supplies can be purchased at on-campus bookstores, or ordered online through the campus bookstore. www.centralgatech.edu/bookstore POLICIES Check Policy CGTC accepts personal checks for tuition and fees for the exact amount due. Separate checks are required for bookstore purchases. No personal checks are cashed checks. Refunds Tuition and Fees A student enrolled in a credit hour program may receive a full refund of tuition and fees if the stu", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2030", "canonical_url": "/centralgatech/courses/surg-2030", "markdown_url": "/centralgatech/courses/surg-2030.md" }, { "id": "centralgatech-000002", "code": "ELTR 1010", "title": "$20.00", "credits": 11, "hours": 11, "description": "PAYING FOR COLLEGE CENTRAL GEORGIA TECHNICAL COLLEGE later than the third class day of the term. No refunds will be given for withdrawals after the third class day. Refunds, when due, will be made via BankMobile®, which gives students two options for receiving refunds: • Deposit to a OneAccount, a non-interest bearing, internet-only checking account serviced by BankMobile® • Deposit to another account (students must set up an account with BankMobile® to direct refunds/ deposits to personal accounts) BankMobile® will send each student a welcome package to the address that CGTC has on file for the student. Students can then visit myonemoney.com to set up preferences for refunds and alerts. It is important that a student update the address on file if it changes. This can be done through Titan Experience at any time. CGTC Bookstore The CGTC Bookstore allows a full refund on unopened/ unused course materials/textbooks (receipt is required for returns). The last day for refunds will be printed on the receipt and also posted in the CGTC Bookstore each semester. Course materials purchased after the campus specific deadline must be returned within seven business days of purchase for a full refund. Course materials purchased during the last week of classes or final exams are not refundable. Brytewave digital textbooks must be returned within 14 days of purchase for a full refund. Contact the CGTC Bookstore for details regarding the return policies. Financial Aid Please see the Financia", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001052", "centralgatech-001053", "centralgatech-001055", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1010", "canonical_url": "/centralgatech/courses/eltr-1010", "markdown_url": "/centralgatech/courses/eltr-1010.md" }, { "id": "centralgatech-000003", "code": "COMP 1000", "title": "A = 4 x 3 = 12", "credits": 12, "hours": 12, "description": "Total Number of Credits Attempted.... 9 Total Points Earned for All Courses.......................... 27 Grade Point Average = Total Points Earned for All Courses = = 3.00 Total Number of Credits Attempted 9 Grade Appeals After informally attempting to have concerns resolved, a student may appeal a final grade or other academic decision in accordance with the procedure outlined below. The procedures below relate to academic appeals only; procedures for submitting appeals for financial aid reinstatement can be found in the financial aid section of this catalog. Absent extraordinary circumstances, the appeal must be filed, in writing, within one semester from the date the disputed grade was issued or other action complained of occurred. CGTC reserves the right to refuse consideration of appeals initiated more than one calendar year following the time that the dispute arose or the disputed grade was issued. Appeals concerning the construction or administration of laws, policies, standards, or procedures related to the operation of this institution shall follow the procedures outlined below. Any CGTC employee engaged in counseling or advising students concerning the appeals process will comply with the provisions contained in this procedure. Procedure If the student is appealing a final course grade, it is recommended that a student initially discuss their final course grade with the instructor who assigned the grade. If no solution to the concern is reached, a student has the ri", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-001018", "centralgatech-001020", "centralgatech-001021", "centralgatech-001059", "centralgatech-001060", "centralgatech-001072", "centralgatech-001073", "centralgatech-001074", "centralgatech-001075", "centralgatech-001076", "centralgatech-001082", "centralgatech-001091", "centralgatech-001092", "centralgatech-001094", "centralgatech-001095", "centralgatech-001096", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001101", "centralgatech-001102", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001106", "centralgatech-001108", "centralgatech-001109", "centralgatech-001110", "centralgatech-001111", "centralgatech-001112", "centralgatech-001113", "centralgatech-001114", "centralgatech-001117", "centralgatech-001119", "centralgatech-001120", "centralgatech-001121", "centralgatech-001122", "centralgatech-001123", "centralgatech-001124", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001134", "centralgatech-001135", "centralgatech-001136", "centralgatech-001137", "centralgatech-001138", "centralgatech-001141", "centralgatech-001143", "centralgatech-001144", "centralgatech-001146", "centralgatech-001147", "centralgatech-001148", "centralgatech-001150", "centralgatech-001151", "centralgatech-001156", "centralgatech-001157", "centralgatech-001162", "centralgatech-001165", "centralgatech-001167", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COMP1000", "canonical_url": "/centralgatech/courses/comp-1000", "markdown_url": "/centralgatech/courses/comp-1000.md" }, { "id": "centralgatech-000004", "code": "SPCH 1101", "title": "Public Speaking 3", "credits": null, "hours": null, "description": "Total Minimum Hours 18 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE EDUCATION ASSOCIATE OF SCIENCE IN EDUCATION (AC93) Associate Degree The Associate of Science in Education degree program is a series of courses designed to provide students with a foundation in education preparing students for careers in teaching, educational administration, or related fields. The program emphasizes a combination of education theory and practical application as well as general core, science, and mathematics competencies necessary for successful employment. Additionally, graduates would be eligible to articulate to select 4-year institutions without loss of credit and having met the number of credit hours necessary for a 2+2 transfer to a B.S. in Education. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Associate Degree Level Requirement Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 42 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SPCH1101", "canonical_url": "/centralgatech/courses/spch-1101", "markdown_url": "/centralgatech/courses/spch-1101.md" }, { "id": "centralgatech-000005", "code": "SOCI 1160", "title": "| INTRODUCTION TO SOCIAL PROBLEMS", "credits": null, "hours": null, "description": "(45-0-3) This course will provide an in-depth study of current social problems such as poverty, unemployment, race relations, environmental concerns, deviance, drugs and crime, social inequality, and global threats. Emphasis is on causes, consequences, policy, and possible solutions to these problems. Social Worker", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SOCI1160", "canonical_url": "/centralgatech/courses/soci-1160", "markdown_url": "/centralgatech/courses/soci-1160.md" }, { "id": "centralgatech-000006", "code": "PHYS 1111L", "title": "| INTRODUCTORY PHYSICS LAB I", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in PHYS 1111. The laboratory exercises for this course include units of measurement, Newton’s laws, work energy and power, momentum and collisions, one- and two-dimensional motion, circular motion and law of gravity, rotational dynamics and static equilibrium, elasticity theory, harmonic motion, theory of heat and heat transfer, thermodynamics, wave motion, and sound. Prerequisite: MATH 1112 OR MATH 1113 Co-requisite: ENGL 1101, PHYS 1111", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001067", "centralgatech-001069", "centralgatech-001070" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1111L", "canonical_url": "/centralgatech/courses/phys-1111l", "markdown_url": "/centralgatech/courses/phys-1111l.md" }, { "id": "centralgatech-000007", "code": "SPAN 1102", "title": "| INTRODUCTION TO SPANISH LANGUAGE", "credits": null, "hours": null, "description": "AND CULTURE II (45-0-3) This course is a continuation of SPAN1101 that advances the student’s acquisition of the target language and understanding of cultural difference between American and Hispanic cultures. Emphasis is placed on improving effective communication skills in the areas of reading, writing, and speaking the Spanish language. Not open to native speakers of Spanish. Prerequisite: SPAN 1101 Speech", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SPAN1102", "canonical_url": "/centralgatech/courses/span-1102", "markdown_url": "/centralgatech/courses/span-1102.md" }, { "id": "centralgatech-000008", "code": "PSYC 1010", "title": "Basic Psychology* 3", "credits": null, "hours": null, "description": "Total Hours 26 *Please note that ALHS 1011, ALHS 1090, ENGL 1010, MATH 1012 and PSYC 1010 are prerequisite requirements” after course listing ACADEMIC PROGRAMS DENTAL ASSISTING DENTAL ASSISTING (DA12) Diploma Prepares students for employment in a variety of positions in today’s dental offices. This program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of dental assisting. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 17 Location(s) Offered: Macon Competitive Selection: No Credit Hours General Education Core Courses 9", "prerequisites": [], "program_ids": [ "centralgatech-001045", "centralgatech-001071", "centralgatech-001076", "centralgatech-001092", "centralgatech-001099", "centralgatech-001106", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC1010", "canonical_url": "/centralgatech/courses/psyc-1010", "markdown_url": "/centralgatech/courses/psyc-1010.md" }, { "id": "centralgatech-000009", "code": "EMPL 1000", "title": "Interpersonal Relations and Professional", "credits": null, "hours": null, "description": "Development 2 Program Specific Electives 18 XXXX xxxx Program Specific Elective Student may select any 1000- and 2000-level occupational courses related to major OR degree-level general education courses not used above. Please consult with your faculty advisor and CGTC’s articulation website (www.centralgatech.edu/academics/articulation) for transfer options. Total Minimum Hours 60 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE INTERDISCIPLINARY STUDIES INTERDISCIPLINARY STUDIES (AF53) Associate Degree Allows customization of the program of study based on a student’s individual academic and professional goals. Interdisciplinary studies is an option for students who wish to combine coursework from various disciplines into a single degree program if his or her specific goals and interests cannot be met through a school’s existing majors, minors and electives. Students should work closely with a faculty advisor to strategically select coursework from designated areas of concentration that best suits their career path. Learning opportunities develop academic and professional knowledge and skills required for job acquisition or continued education. Education Requirements Admission: TCSG Standard Graduation: High school diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 21 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000999", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001018", "centralgatech-001020", "centralgatech-001021", "centralgatech-001036", "centralgatech-001037", "centralgatech-001045", "centralgatech-001052", "centralgatech-001053", "centralgatech-001060", "centralgatech-001071", "centralgatech-001073", "centralgatech-001076", "centralgatech-001082", "centralgatech-001092", "centralgatech-001099", "centralgatech-001106", "centralgatech-001126", "centralgatech-001128", "centralgatech-001131", "centralgatech-001136", "centralgatech-001138", "centralgatech-001146", "centralgatech-001147", "centralgatech-001148", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMPL1000", "canonical_url": "/centralgatech/courses/empl-1000", "markdown_url": "/centralgatech/courses/empl-1000.md" }, { "id": "centralgatech-000010", "code": "MATH 1103", "title": "Quantitative Skills and Reasoning 3", "credits": 15, "hours": 15, "description": "or MATH 1101 Mathematical Modeling (3) Area IV - Humanities/Fine Arts XXXX xxxx Humanities/Fine Arts Elective 3 XXXX xxxx General Education Core Elective (Areas I - IV) 3 (Choose 3 hours from Areas I-V “General Education Core Courses” on page 68) Course Cluster 45 45 hours of advisor-guided occupational/degree-level courses excluding the 15 credit hours required to satisfy Areas I-IV. Total Hours 60 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ACADEMIC PROGRAMS Legend of Course Descriptions Since Central Georgia Technical College is continuously expanding and updating its programs and services, material in the CGTC catalog is subject to change without prior notice. Following are descriptions of courses offered by CGTC. Courses are grouped alphabetically. Each course title is preceded by a four-letter prefix and the course number. The three numbers on the right indicate lecture hours per week, lab hours per week and total credit hours, as shown below. Some courses have prerequisites or co-requisites listed. A prerequisite must be taken prior to entering a course. A co- requisite must be taken prior to, or concurrently with, the course. In individual cases, prerequisites or co-requisites may be waived upon recommendation of the instructor or approval of the department chairperson. For a list of suggested courses in specific programs of study, refer to the appropriate program in the Aerospace, Trade & Industry Programs; Business & Computer Technologies Programs; Health Sc", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001030", "centralgatech-001034", "centralgatech-001035", "centralgatech-001044", "centralgatech-001045", "centralgatech-001060", "centralgatech-001090", "centralgatech-001091", "centralgatech-001092", "centralgatech-001098", "centralgatech-001099", "centralgatech-001101", "centralgatech-001106", "centralgatech-001112", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001130", "centralgatech-001131", "centralgatech-001135", "centralgatech-001136", "centralgatech-001137", "centralgatech-001138", "centralgatech-001144", "centralgatech-001147", "centralgatech-001148", "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1103", "canonical_url": "/centralgatech/courses/math-1103", "markdown_url": "/centralgatech/courses/math-1103.md" }, { "id": "centralgatech-000011", "code": "MATH 1012", "title": "| FOUNDATIONS OF MATHEMATICS", "credits": null, "hours": null, "description": "(45-0-3) Emphasizes the application of basic mathematical skills used in the solution of occupational and technical problems. Topics include fractions, decimals, percents, ratios and proportions, measurement and conversion, geometric concepts, technical applications, and basic statistics. Prerequisite: Appropriate Arithmetic Placement Test Score", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000999", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001018", "centralgatech-001020", "centralgatech-001021", "centralgatech-001036", "centralgatech-001037", "centralgatech-001045", "centralgatech-001052", "centralgatech-001053", "centralgatech-001060", "centralgatech-001061", "centralgatech-001062", "centralgatech-001071", "centralgatech-001076", "centralgatech-001078", "centralgatech-001082", "centralgatech-001092", "centralgatech-001106", "centralgatech-001126", "centralgatech-001128", "centralgatech-001131", "centralgatech-001136", "centralgatech-001138", "centralgatech-001140", "centralgatech-001147", "centralgatech-001148", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1012", "canonical_url": "/centralgatech/courses/math-1012", "markdown_url": "/centralgatech/courses/math-1012.md" }, { "id": "centralgatech-000012", "code": "PSYC 1101", "title": "Introducto", "credits": null, "hours": null, "description": "ry Psychology Learning Support Learning Support courses provide remedial support in reading, language, and math that will aid the student in mastering the skills needed for the chosen program of study. Assignment to Learning Support courses is based on the results of standardized placement tests and the competencies needed for the prospective program of study. Each program of study has established a description of entry-level reading, language, and math competencies. If test scores indicate that the student is not academically prepared to enter a regular program of study, the student may be placed in one or more learning support courses and the study skills seminar (COLL 1500) course. Learning Support Courses", "prerequisites": [], "program_ids": [ "centralgatech-001126", "centralgatech-001128", "centralgatech-001136", "centralgatech-001147", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC1101", "canonical_url": "/centralgatech/courses/psyc-1101", "markdown_url": "/centralgatech/courses/psyc-1101.md" }, { "id": "centralgatech-000013", "code": "MATH 0098", "title": "Elementary Algebra 3", "credits": null, "hours": null, "description": "Elective Courses Elective courses are available to provide the student with extended opportunities to learn skills and competencies beyond the specific occupational curriculum. Additional electives may be specified in the occupational curriculum as required electives. These courses serve as support to the established curriculum and allow students to enhance the learning experiences relevant to their occupational/technical programs. Students should consult their academic advisor for a list of elective classes appropriate to their program of study. Study Abroad CGTC’s Office of Global Initiatives offers students the opportunity to travel abroad, become immersed in cultural history, participate in guided tours, and earn college credit. Qualified students, other than those enrolled in the Dual Enrollment program, may participate in programs such as: International Business and Logistics Management in Brazil; Health Sciences Service Learning in St. Vincent and the Grenadines; and Humanities in Ireland. Scholarship opportunities are available. For complete information, including, cost and eligibility requirements please visit www.centralgatech.edu/ global. Students enrolled in CGTC’s Dual Enrollment program may participate in the study abroad trip to Ireland, offered in partnership with The Institute of Study Abroad Ireland. Students will be immersed in the vast cultural history of Ireland and participate in guided tours through museums, castles and more. For complete information, i", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH0098", "canonical_url": "/centralgatech/courses/math-0098", "markdown_url": "/centralgatech/courses/math-0098.md" }, { "id": "centralgatech-000014", "code": "AIRC 1090", "title": "Troubleshooting Air Conditioning Systems 4", "credits": null, "hours": null, "description": "Total Hours 16 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE AIRCRAFT STRUCTURAL TECHNOLOGY AIRCRAFT STRUCTURAL TECHNOLOGY (AST2) Diploma Prepares students for careers in aircraft structures manufacture and repair. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of aircraft structural theory and practical application necessary for successful employment. Program graduates are qualified as aircraft structural specialists. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000998" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1090", "canonical_url": "/centralgatech/courses/airc-1090", "markdown_url": "/centralgatech/courses/airc-1090.md" }, { "id": "centralgatech-000015", "code": "AIRC 1050", "title": "HVACR Electrical Components", "credits": null, "hours": null, "description": "and Controls 4 Total Hours 12 AIR CONDITIONING TECHNICIAN ASSISTANT (AZ31) Technical Certificate of Credit This certificate offers courses designed to prepare students for refrigeration assistant positions within the HVAC industry. Topics include refrigeration fundamentals, refrigerator principles and practices, and system components. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins VECTR | GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000996" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1050", "canonical_url": "/centralgatech/courses/airc-1050", "markdown_url": "/centralgatech/courses/airc-1050.md" }, { "id": "centralgatech-000016", "code": "AIRC 1020", "title": "Refrigeration Systems Components 4", "credits": null, "hours": null, "description": "Total Hours 12 RESIDENTIAL AIR CONDITIONING TECHNICIAN (RA21) Technical Certificate of Credit Prepares students for entry-level positions in the maintenance and repair of residential air conditioning systems. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000997", "centralgatech-000998" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1020", "canonical_url": "/centralgatech/courses/airc-1020", "markdown_url": "/centralgatech/courses/airc-1020.md" }, { "id": "centralgatech-000017", "code": "ASTT 1180", "title": "Aircraft Technical Publications 3", "credits": null, "hours": null, "description": "Total Hours 48 AIRCRAFT ASSEMBLY TECHNICIAN I (AA61) Technical Certificate of Credit Provides technical training to existing industry and individuals interested in obtaining aircraft structural assembly skills, and results from industry requesting new personnel with the skills addressed in the aircraft structural courses included in this program. This program will provide a minimum of training for job market entry and/or upgrading for existing industry personnel and could lead to continued training for a diploma. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-000999" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1180", "canonical_url": "/centralgatech/courses/astt-1180", "markdown_url": "/centralgatech/courses/astt-1180.md" }, { "id": "centralgatech-000018", "code": "ASTT 1020", "title": "| AIRCRAFT BLUEPRINT READING", "credits": null, "hours": null, "description": "This course introduces aerospace specific blueprint information which builds on a basic knowledge of blueprint terminology and symbols. Topics include: dimensioning standards and practices, blueprint components, interpretation of reference planes and coordinate systems, engineering numbering and revision system, body/field of the drawing, detail drawings, and configurated/method/ undimensioned drawings.", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001000", "centralgatech-001001" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1020", "canonical_url": "/centralgatech/courses/astt-1020", "markdown_url": "/centralgatech/courses/astt-1020.md" }, { "id": "centralgatech-000019", "code": "ASTT 1030", "title": "Structural Fundamentals 6", "credits": null, "hours": null, "description": "Minimum Total Hours 11 AIRCRAFT ASSEMBLY TECHNICIAN II (AR71) Technical Certificate of Credit The Aircraft Assembly Technician II certificate program will provide additional technical training to existing industry and individuals interested in obtaining aircraft structural assembly skills. This program will provide a minimum of training for job market entry and/or upgrading for existing industry personnel and could lead to continued training for a diploma. This program results from industry requesting new personnel with the skills addressed in the aircraft structural courses included in this program. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Dual Enrollment Credit Hours Please select a course not taken in AA61", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001000", "centralgatech-001002" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1030", "canonical_url": "/centralgatech/courses/astt-1030", "markdown_url": "/centralgatech/courses/astt-1030.md" }, { "id": "centralgatech-000020", "code": "ASTT 1091", "title": "Composites and Bonded Structures 6", "credits": null, "hours": null, "description": "Minimum Total Hours 15 ACADEMIC PROGRAMS AUTOMATION TECHNOLOGY AUTOMATION TECHNOLOGY (IS13) Associate Degree Prepares students for a career as an Industrial Systems Technician/Electrician. The program provides learning opportunities that introduce, develop, and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The degree program teaches skills in industrial systems technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, PLCs, instrumentation, fluid power, mechanical, pumps and piping, and computers. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001001", "centralgatech-001002" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1091", "canonical_url": "/centralgatech/courses/astt-1091", "markdown_url": "/centralgatech/courses/astt-1091.md" }, { "id": "centralgatech-000021", "code": "ENGL 1101", "title": "Composition and Rhetoric 3", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Guided Electives** 9-12 Social/Behavioral Science - XXXX xxxx Social/Behavioral Sciences Elective 6 (Choose 6 hours from “Area II - Social/Behavioral Sciences” on page 69) Natural Sciences/Mathematics - XXXX xxxx Natural Sciences/Mathematics Elective 3 (Choose 3 hours from “Area III - Natural Sciences/Mathematics” on page 69) Humanities/Fine Arts - XXXX xxxx Humanities/Fine Arts Elective 6 (Choose 6 hours from “Area IV - Humanities/Fine Arts” on page 69) Electives – Select 6 to 12 hours: XXXX xxxx General Education Core Elective (Areas I - IV) 6-12 Total Hours 36 **Students may take any course except Learning Support ACADEMIC PROGRAMS TECHNICAL STUDIES TECHNICAL STUDIES (TS23) Associate Degree Prepares students for employment in a variety of positions in today’s technical industry fields. This program offers students learning opportunities that develop higher level academic skills required for job acquisition, retention, and advancement. The program emphasizes a continuation of technical studies theory and practical applications necessary for successful employment. Program graduates will be qualified for employment as technicians. This degree requires a course cluster of 45 hours that includes completion of at least one Technical Certificate of Credit or diploma. Any hours not included in the completed Technical Certificate of Credit or diploma may be satisfied by any combination of advisor guided occupational/degree-level course work excluding the 15", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001030", "centralgatech-001034", "centralgatech-001035", "centralgatech-001044", "centralgatech-001045", "centralgatech-001059", "centralgatech-001060", "centralgatech-001063", "centralgatech-001067", "centralgatech-001072", "centralgatech-001073", "centralgatech-001090", "centralgatech-001091", "centralgatech-001092", "centralgatech-001098", "centralgatech-001099", "centralgatech-001101", "centralgatech-001106", "centralgatech-001112", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001130", "centralgatech-001131", "centralgatech-001135", "centralgatech-001136", "centralgatech-001137", "centralgatech-001138", "centralgatech-001144", "centralgatech-001147", "centralgatech-001148", "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL1101", "canonical_url": "/centralgatech/courses/engl-1101", "markdown_url": "/centralgatech/courses/engl-1101.md" }, { "id": "centralgatech-000022", "code": "MATH 1101", "title": "Mathematical Modeling 3", "credits": null, "hours": null, "description": "or MATH 1103 Quantitative Skills and Reasoning (3) XXXX xxxx Natural Sciences/Mathematics Elective 3-4 (Choose 3-4 hours from “Area III - Natural Sciences/Mathematics” on page 69) Area IV - Humanities/Fine Arts XXXX xxxx Humanities/Fine Arts Elective 3 (Choose 3 hours from “Area IV - Humanities/Fine Arts” on page 69) Interdisciplinary Studies Requirements 40 Choose course work from the following interdisciplinary areas of concentration: Aerospace, Trade & Industry; Business & Computer Technologies; Health Sciences; or Public Safety & Professional Services. Students should work with a faculty advisor to strategically select courses to design a program that suits a specific career path. Minimum Total Hours 61 ACADEMIC PROGRAMS MEDICAL PROFESSIONS PATHWAY ASSOCIATE OF SCIENCE IN GENERAL STUDIES (AB73) with HEALTHCARE PROFESSIONAL (HP41) PATHWAY Associate Degree + TCC The Associate of Science Degree in General Studies combined with the Healthcare Professional (HP41) pathway prepares students to pursue CGTC’s Medical Professions Pathway and gain qualification to transfer to the Trinity School of Medicine’s Transition Term to complete a total of 95 hours of coursework. Students with grades of C or better in all coursework and a 3.0 or better GPA will be considered for promotion into the Trinity School of Medicines’ Doctor of Medicine degree program. Students with a GPA between 2.5 and 2.99 may be considered for promotion to the MD program on a case-by-case basis. Students not selec", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001030", "centralgatech-001034", "centralgatech-001035", "centralgatech-001044", "centralgatech-001045", "centralgatech-001060", "centralgatech-001090", "centralgatech-001091", "centralgatech-001092", "centralgatech-001098", "centralgatech-001099", "centralgatech-001101", "centralgatech-001106", "centralgatech-001112", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001130", "centralgatech-001131", "centralgatech-001135", "centralgatech-001136", "centralgatech-001137", "centralgatech-001138", "centralgatech-001144", "centralgatech-001147", "centralgatech-001148", "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1101", "canonical_url": "/centralgatech/courses/math-1101", "markdown_url": "/centralgatech/courses/math-1101.md" }, { "id": "centralgatech-000023", "code": "ELTR 1020", "title": "Alternating Current Fundamentals 3", "credits": null, "hours": null, "description": "or IDFC 1012 Alternating Current I (3) or IDSY 1105 AC Circuit Analysis (3) Total Hours 14 ACADEMIC PROGRAMS AUTOMOTIVE COLLISION REPAIR AUTOMOTIVE COLLISION REPAIR (ACR2) Diploma Prepares students for careers in the automotive collision repair profession. Learning opportunities develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes automotive painting and refinishing. Program graduates are qualified as painting and refinishing technicians. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001014", "centralgatech-001052", "centralgatech-001053", "centralgatech-001055", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1020", "canonical_url": "/centralgatech/courses/eltr-1020", "markdown_url": "/centralgatech/courses/eltr-1020.md" }, { "id": "centralgatech-000024", "code": "IDFC 1011", "title": "Direct Current I 3", "credits": null, "hours": null, "description": "or IDSY 1101 DC Circuit analysis (3) or ELTR 1010 Direct Current Fundamentals (3) Total Hours 67 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE AUTOMATION TECHNOLOGY (IST4) Diploma Prepares students for a career as an industrial systems technician/electrician. The program provides learning opportunities that introduce, develop, and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The program teaches skills in industrial systems technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, PLCs, instrumentation, fluidpower, mechanical, pumps and piping, and computers. Graduates of the program are qualified for employment as industrial electricians or industrial systems technicians. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001014", "centralgatech-001053", "centralgatech-001071", "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDFC1011", "canonical_url": "/centralgatech/courses/idfc-1011", "markdown_url": "/centralgatech/courses/idfc-1011.md" }, { "id": "centralgatech-000025", "code": "IDSY 2001", "title": "PLC II 4", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE RESIDENTIAL/INDUSTRIAL WIRING TECHNICIAN (RW41) Technical Certificate of Credit Trains students to perform their duties more efficiently by being knowledgeable of residential/industrial wiring principles and practical applications. The program will prepare students to enter employment proficient in industrial maintenance applications and upgrade skills of current industrial maintenance personnel working in the field. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001005", "centralgatech-001017", "centralgatech-001059", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2001", "canonical_url": "/centralgatech/courses/idsy-2001", "markdown_url": "/centralgatech/courses/idsy-2001.md" }, { "id": "centralgatech-000026", "code": "ENGT 2500", "title": "Engineering Internship 3", "credits": null, "hours": null, "description": "Total Hours 44 **Students may take any course except those specifically excluded or those required by the program ACADEMIC PROGRAMS INDUSTRIAL MECHANICAL SYSTEMS (IMS2) Diploma Provides instruction to prepare students for employment in a variety of positions within the industrial production equipment maintenance field. The program provides learning opportunities that introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skills. Graduates of the program are qualified for employment as an industrial maintenance mechanic. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001005", "centralgatech-001068", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGT2500", "canonical_url": "/centralgatech/courses/engt-2500", "markdown_url": "/centralgatech/courses/engt-2500.md" }, { "id": "centralgatech-000027", "code": "HUMN 1101", "title": "| INTRODUCTION TO HUMANITIES", "credits": null, "hours": null, "description": "(45-0-3) Explores the philosophic and artistic heritage of humanity expressed through a historical perspective on visual arts, music, and literature in the early, middle, and modern periods. The humanities provide insight into people and society in both the Western and non-Western world. Topics include historical and cultural developments, contributions of the humanities, and research. Prerequisite: ENGL 1101 Instrumentation & Control", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HUMN1101", "canonical_url": "/centralgatech/courses/humn-1101", "markdown_url": "/centralgatech/courses/humn-1101.md" }, { "id": "centralgatech-000028", "code": "ENGL 1010", "title": "MATH 1012, PSYC 1010, ALHS 1090, and ALHS", "credits": null, "hours": null, "description": "1011 with a grade of “C” or above. Students can complete the remaining two required courses, ALHS 1040 and COMP 1000 prior to beginning the occupational classes or while taking PSGT 1111, PSGT 2100 and PSGT 2101. Completion of all courses with a grade “C” or above is required to progress. Students who receive a grade below “C” are considered off- track and will be subject to repeat the course based upon space availability during the next offering. Criminal Background Checks – Following Fall Semester acceptance into the Polysomnography Program, students will be required to complete a criminal background check during Spring Semester to verify eligibility for clinical site acceptance during Summer Semester. Prospective applicants with a conviction history are encouraged to speak with the program coordinator prior to application submission. Criminal backgrounds may prohibit a student or graduate from gaining employment as a Polysomnographic Technologist. Drug Screening – Following Fall Semester acceptance into the Polysomnography Program, students will be required to complete a drug screen during Spring Semester to verify eligibility for clinical site acceptance during Summer Semester. Positive drug screen results will prohibit a student from being placed with a clinical site. Health Physical – Once accepted into the program, students will be required to complete a health physical and be cleared by a licensed Physician to perform the duties of a practicing Sleep Technologist. Imm", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000999", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001018", "centralgatech-001020", "centralgatech-001021", "centralgatech-001036", "centralgatech-001037", "centralgatech-001045", "centralgatech-001052", "centralgatech-001053", "centralgatech-001060", "centralgatech-001071", "centralgatech-001073", "centralgatech-001076", "centralgatech-001082", "centralgatech-001092", "centralgatech-001099", "centralgatech-001102", "centralgatech-001103", "centralgatech-001105", "centralgatech-001106", "centralgatech-001117", "centralgatech-001120", "centralgatech-001121", "centralgatech-001126", "centralgatech-001128", "centralgatech-001131", "centralgatech-001136", "centralgatech-001138", "centralgatech-001147", "centralgatech-001148", "centralgatech-001151", "centralgatech-001153" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL1010", "canonical_url": "/centralgatech/courses/engl-1010", "markdown_url": "/centralgatech/courses/engl-1010.md" }, { "id": "centralgatech-000029", "code": "IDSY 1191", "title": "Pumps and Piping Systems 3", "credits": null, "hours": null, "description": "Total Hours 13 INDUSTRIAL MOTOR CONTROL TECHNICIAN (IM41) Technical Certificate of Credit Provides training in the maintenance of industrial motor controls. Topics include DC and AC motors, basic, advanced, and variable speed motor controls, and magnetic starters and braking. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | VECTR Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001006", "centralgatech-001011", "centralgatech-001012", "centralgatech-001016" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1191", "canonical_url": "/centralgatech/courses/idsy-1191", "markdown_url": "/centralgatech/courses/idsy-1191.md" }, { "id": "centralgatech-000030", "code": "MATH 1013", "title": "| ALGEBRAIC CONCEPTS", "credits": null, "hours": null, "description": "Emphasizes concepts and operations which are applied to the study of algebra. Topics include basic mathematical concepts, basic algebraic concepts, and intermediate algebraic concepts. Prerequisite: MATH 0098 or Appropriate Algebra Placement Test Score", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001060", "centralgatech-001061", "centralgatech-001062", "centralgatech-001071", "centralgatech-001073", "centralgatech-001076" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1013", "canonical_url": "/centralgatech/courses/math-1013", "markdown_url": "/centralgatech/courses/math-1013.md" }, { "id": "centralgatech-000031", "code": "IDSY 1230", "title": "| INSTRUMENTATION", "credits": null, "hours": null, "description": "Provides instruction in the principles and practices of instrumentation for industrial process control systems with an emphasis on industrial maintenance techniques for production equipment. Topics include instrument tags; process documentation; basic control theory; sensing pressure, flow, level, and temperature; instrument calibration; and loop tuning.", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001005", "centralgatech-001014", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1230", "canonical_url": "/centralgatech/courses/idsy-1230", "markdown_url": "/centralgatech/courses/idsy-1230.md" }, { "id": "centralgatech-000032", "code": "IDSY 1240", "title": "Maintenance for Reliability 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Electives 11 Occupationally-Related Electives: IDSY XXXX Industrial Fundamentals Elective** AIRC XXXX Air Conditioning Technology Elective** AUMF XXXX Automated Manufacturing Technology Elective** ELCR XXXX Electronics Technology Elective** MCHT XXXX Machine Tool Elective** WELD XXXX Welding Elective**", "prerequisites": [], "program_ids": [ "centralgatech-001006" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1240", "canonical_url": "/centralgatech/courses/idsy-1240", "markdown_url": "/centralgatech/courses/idsy-1240.md" }, { "id": "centralgatech-000033", "code": "IDSY 2000", "title": "| PLC I", "credits": null, "hours": null, "description": "This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications. Prerequisite: IDSY 1113", "prerequisites": [ "IDSY 1113" ], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001007", "centralgatech-001008", "centralgatech-001014", "centralgatech-001017", "centralgatech-001059", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2000", "canonical_url": "/centralgatech/courses/idsy-2000", "markdown_url": "/centralgatech/courses/idsy-2000.md" }, { "id": "centralgatech-000034", "code": "AUMF 1580", "title": "Automated Manufacturing Skills 3", "credits": null, "hours": null, "description": "Minimum Total Hours 17 AUTOMATION AND ROBOTICS TECHNOLOGY I (EM81) Technical Certificate of Credit Provides instruction in industrial systems electrical inspection, maintenance, service, and repair. Topics include DC and AC fundamentals, motor controls, magnetic starters and braking systems, PLCs, and industrial wiring procedures. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001007", "centralgatech-001009" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1580", "canonical_url": "/centralgatech/courses/aumf-1580", "markdown_url": "/centralgatech/courses/aumf-1580.md" }, { "id": "centralgatech-000035", "code": "IDSY 1111", "title": "Industrial Wiring 4", "credits": null, "hours": null, "description": "or IDSY 1005 Introduction to Mechatronics (4) or MGMT 1115 Leadership (3) Total Hours 17 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE CERTIFIED MANUFACTURING SPECIALIST (CM51) Technical Certificate of Credit Prepares students for entry-level employment in a manufacturing environment. Topics include organization principles, workplace skills, manufacturing production, automated manufacturing skills, and representative manufacturing skills. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: VECTR Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001005", "centralgatech-001008", "centralgatech-001010", "centralgatech-001013" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1111", "canonical_url": "/centralgatech/courses/idsy-1111", "markdown_url": "/centralgatech/courses/idsy-1111.md" }, { "id": "centralgatech-000036", "code": "AUMF 1660", "title": "Representative Manufacturing Skills 4", "credits": null, "hours": null, "description": "Total Hours 11 INDUSTRIAL ELECTRICIAN (IE41) Technical Certificate of Credit Prepares students for employment using basic electrical maintenance skills. Instruction is provided in the occupational areas of industrial safety, direct and alternating current principles, and industrial wiring. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | VECTR | Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001009" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1660", "canonical_url": "/centralgatech/courses/aumf-1660", "markdown_url": "/centralgatech/courses/aumf-1660.md" }, { "id": "centralgatech-000037", "code": "IDSY 1113", "title": "Motor Controls II 4", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS INSTRUMENTATION AND CONTROLS TECHNICIAN I (IA31) Technical Certificate of Credit Provides additional educational opportunities for plant personnel or other experienced individuals who need further training in the area of instrumentation and control maintenance functions such as troubleshooting, repair, and installation of instruments, control devices, and electronic equipment. Instruction is performed through a combination of theory and hands-on training. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001005", "centralgatech-001013", "centralgatech-001014", "centralgatech-001015", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1113", "canonical_url": "/centralgatech/courses/idsy-1113", "markdown_url": "/centralgatech/courses/idsy-1113.md" }, { "id": "centralgatech-000038", "code": "WELD 1330", "title": "| METAL WELDING AND CUTTING", "credits": null, "hours": null, "description": "TECHNIQUES (15-45-2) This course provides instruction in the fundamentals of metal welding and cutting techniques. Instruction is provided in safety and health practices, metal fabrication preparation, and metal fabrication procedures. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ACADEMIC PROGRAMS ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE NON-CREDIT AND RE-ENTRY SERVICES Non-Credit Programs ADULT EDUCATION The Adult Education Division (AED) offers instruction for adults seeking to develop essential skills, prepare for High School Equivalency exams, strengthen personal character and family foundations, acquire the skills needed to thrive in today’s workforce, improve their English language proficiency, or achieve Citizenship. AED programs enhance students’ foundational education, critical thinking, digital literacy, soft skills, and industry-specific competencies, enabling success across various industries, regardless of their academic or career goals. AED provides flexible scheduling options, including morning, afternoon, evening, and online classes. Additionally, AED offers resources tailored for out-of-school youth, underemployed and unemployed adults, and reentry populations in Central Georgia. Learning experiences are focused on streamlining adult education across systems to shorten the time between attaining a high school equivalency credential and a stackable college credential. High school equivalency options include the GED® Test, the HiSET® Exam, and", "prerequisites": [], "program_ids": [ "centralgatech-001016", "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1330", "canonical_url": "/centralgatech/courses/weld-1330", "markdown_url": "/centralgatech/courses/weld-1330.md" }, { "id": "centralgatech-000039", "code": "ACRP 1015", "title": "Fundamentals of Automotive Welding 4", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE AUTOMOTIVE TECHNOLOGY AUTOMOTIVE FUNDAMENTALS (AF12) Diploma Prepares students for careers in the automotive service and repair profession. Learning opportunities enable students to develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of automotive mechanics theory and practical application necessary for successful employment. Program graduates are qualified as entry-level technicians. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001018", "centralgatech-001019" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP1015", "canonical_url": "/centralgatech/courses/acrp-1015", "markdown_url": "/centralgatech/courses/acrp-1015.md" }, { "id": "centralgatech-000040", "code": "ACRP 2009", "title": "Refinishing Internship 2", "credits": null, "hours": null, "description": "or ACRP 2108 Refinishing Internship I (1) and ACRP 2109 Refinishing Internship II (1) Minimum Total Hours 40 AUTOMOTIVE COLLISION REPAIR ASSISTANT I (AB51) Technical Certificate of Credit Prepares students for employment as assistants to lead and master technicians in an automotive collision repair shop. Topics covered include work safety, hand and power tools, basic component replacement, automotive welding techniques, and mechanical and electrical systems. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP2009", "canonical_url": "/centralgatech/courses/acrp-2009", "markdown_url": "/centralgatech/courses/acrp-2009.md" }, { "id": "centralgatech-000041", "code": "AUTT 1010", "title": "| AUTOMOTIVE TECHNOLOGY", "credits": null, "hours": null, "description": "INTRODUCTION (15-30-2) Introduces basic concepts and practices necessary for safe and effective automotive shop operations. Topics include: safety procedures; legal/ethical responsibilities; general service; hand tools; shop organization, management, and work flow systems.", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022", "centralgatech-001023", "centralgatech-001024", "centralgatech-001025", "centralgatech-001026", "centralgatech-001027", "centralgatech-001028" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1010", "canonical_url": "/centralgatech/courses/autt-1010", "markdown_url": "/centralgatech/courses/autt-1010.md" }, { "id": "centralgatech-000042", "code": "AUTT 1020", "title": "Automotive Electrical Systems 7", "credits": null, "hours": null, "description": "or AUTT 1021 Automotive Electrical Systems I (4) and AUTT 1022 Automotive Electrical Systems II (3) Total Hours 9 AUTOMOTIVE ENGINE PERFORMANCE TECHNICIAN (AE51) Technical Certificate of Credit Introduces students to the knowledge and skills they will need as entry-level automotive engine performance technicians. Topics covered include: shop safety, electrical/ electronic diagnosis, and diagnosis and service of fuel, ignition, emission and electronic engine controls. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022", "centralgatech-001023", "centralgatech-001024", "centralgatech-001025", "centralgatech-001027" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1020", "canonical_url": "/centralgatech/courses/autt-1020", "markdown_url": "/centralgatech/courses/autt-1020.md" }, { "id": "centralgatech-000043", "code": "AUTT 1030", "title": "| AUTOMOTIVE BRAKE SYSTEMS", "credits": null, "hours": null, "description": "Introduces brake systems theory and its application to automotive systems and anti-lock brake system (ABS) to include ABS components and ABS operation, testing, and diagnosis. Topics include: hydraulic system diagnosis and repair; drum brake diagnosis and repair; disc brake diagnosis and repair; power assist units diagnosis and repair; miscellaneous brake components (wheel bearings, parking brakes, electrical, etc.) diagnosis and repair; test, diagnose, and service electronic brake control system. Co-requisite: AUTT 1010", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1030", "canonical_url": "/centralgatech/courses/autt-1030", "markdown_url": "/centralgatech/courses/autt-1030.md" }, { "id": "centralgatech-000044", "code": "AUTT 1040", "title": "Automotive Engine Performance 7", "credits": null, "hours": null, "description": "or AUTT 1022 Automotive Engine Performance I (3) and AUTT 1042 Automotive Engine Performance II (4) Total Hours 16 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE AUTOMOTIVE ENGINE REPAIR TECHNICIAN (AE61) Technical Certificate of Credit Provides the student with entry-level automotive engine repair skills. Topics include: basic shop safety, basic electrical/ electronic diagnosis, principles of engine operation, basic engine diagnosis, and basic engine repair procedures. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001029" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1040", "canonical_url": "/centralgatech/courses/autt-1040", "markdown_url": "/centralgatech/courses/autt-1040.md" }, { "id": "centralgatech-000045", "code": "AUTT 1060", "title": "Automotive Climate Control Systems 5", "credits": null, "hours": null, "description": "Minimum Total Hours 40 AUTOMOTIVE TECHNOLOGY (AT14) Diploma Prepares students for careers in the automotive service and repair profession. Learning opportunities enable students to develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of automotive mechanics theory and practical application necessary for successful employment. Program graduates are qualified as well rounded entry-level technicians. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001023" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1060", "canonical_url": "/centralgatech/courses/autt-1060", "markdown_url": "/centralgatech/courses/autt-1060.md" }, { "id": "centralgatech-000046", "code": "AUTT 2010", "title": "Automotive Engine Repair 6", "credits": null, "hours": null, "description": "or AUTT 2011 Automotive Engine Repair I (3) and AUTT 2012 Automotive Engine Repair II (3) Total Hours 15 AUTOMOTIVE MAINTENANCE AND LIGHT REPAIR TECHNICIAN (ALR1) Technical Certificate of Credit Prepares students for entry-level maintenance and repair positions in auto service shops. Students will learn the basic repair and maintenance operations in all eight ASE areas of passenger vehicles and light trucks. Graduates of this program will be able to pursue master level auto knowledge in the automotive technology diploma program. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001021", "centralgatech-001025" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2010", "canonical_url": "/centralgatech/courses/autt-2010", "markdown_url": "/centralgatech/courses/autt-2010.md" }, { "id": "centralgatech-000047", "code": "AUTT 2030", "title": "Automotive Automatic Transmissions", "credits": null, "hours": null, "description": "and Transaxles 5 Total Hours 18 ELECTRICAL VEHICLE PROFESSIONAL (EVP1) Technical Certificate of Credit The Electric Vehicle Professional TCC was designed in conjunction with Hyundai subject matter experts to provide students with the knowledge and skill to prepare them for entry level employment in the electrical vehicle production industry. Emphasis is placed on safe and effective automotive shop operations, automotive electrical principles, and operation and service procedures for EV and Hybrid vehicles. This certificate prepares the student to enter into the electrical vehicle production industry with basic knowledge. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville Warner Robins | Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001021", "centralgatech-001027" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2030", "canonical_url": "/centralgatech/courses/autt-2030", "markdown_url": "/centralgatech/courses/autt-2030.md" }, { "id": "centralgatech-000048", "code": "AUTT 1050", "title": "Automotive Suspension", "credits": null, "hours": null, "description": "and Steering Systems 4 Total Hours 17 AUTOMOTIVE CLIMATE CONTROL TECHNICIAN (AH21) Technical Certificate of Credit Provides students with skills for entering the automotive service industry as an entry-level climate control technician. Topics covered include: basic shop safety, electrical/electronic theory and diagnosis, and the theory, operation, diagnosis and servicing of automotive climate control systems. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1050", "canonical_url": "/centralgatech/courses/autt-1050", "markdown_url": "/centralgatech/courses/autt-1050.md" }, { "id": "centralgatech-000049", "code": "AUTT 1013", "title": "Auto Maintenance and Light Repair III 6", "credits": null, "hours": null, "description": "Total Hours 20 AUTOMOTIVE TRANSMISSIONS/TRANSAXLE TECH SPECIALIST (AA71) Technical Certificate of Credit Provides students with the skills to enter the automotive industry as an entry-level transmission, transaxle, and drive line technician. Topics covered include: shop safety, basic electrical/electronic theory and diagnosis, manual transmission/transaxle operation and diagnosis, automatic transmission/transaxle operation and diagnosis, axles operation and diagnosis, differentials operation and diagnosis, and 4WD/AWD systems operation and diagnosis. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001026" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1013", "canonical_url": "/centralgatech/courses/autt-1013", "markdown_url": "/centralgatech/courses/autt-1013.md" }, { "id": "centralgatech-000050", "code": "AUTT 2105", "title": "EV/Hybrid Vehicle Body, Chassis, HVAC", "credits": null, "hours": null, "description": "and Support Systems 3 Total Hours 19 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE AVIATION MAINTENANCE AVIATION MAINTENANCE TECHNOLOGY (AM43) Associate Degree Provides students with an introduction to the occupational area of aviation maintenance as currently understood and practiced by Federal Aviation Administration (FAA) mechanic certificate holders with airframe and/or power plant ratings. In addition, the combined power plant and airframe curriculum is designed to provide students with the technical knowledge and skills required to diagnose problems and repair aircraft power plants, both reciprocating and turbine, their systems and components; and airframes, both metal and wood, their systems and components. Satisfactory completion of all program courses entitles students to participate in FAA power plant and airframe examinations and certification processes. CGTC is a FAA Part 147 Certificated school. New students may take AVMT occupational courses in summer and fall semester only. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001028", "centralgatech-001029" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2105", "canonical_url": "/centralgatech/courses/autt-2105", "markdown_url": "/centralgatech/courses/autt-2105.md" }, { "id": "centralgatech-000051", "code": "AVMT 2286", "title": "Aircraft Propeller Systems 3", "credits": null, "hours": null, "description": "Minimum Total Hours 96 AVIATION MAINTENANCE TECHNOLOGY (AM34) Diploma Provides students with an introduction to the occupational area of aviation maintenance technology as currently understood and practiced by Federal Aviation Administration (FAA) mechanic certificate holders with airframe and/or power plant ratings. In addition, the combined power plant and airframe curriculum is designed to provide students with the technical knowledge and skills required to diagnose problems and repair aircraft power plants, both reciprocating and turbine, their systems and components; and airframes, both metal and wood, their systems and components. Satisfactory completion of all program courses entitles students to participate in FAA power plant and airframe examinations and certification processes. CGTC is a FAA Part 147 Certificated School. New students may take AVMT occupational courses in summer and fall semester only. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2286", "canonical_url": "/centralgatech/courses/avmt-2286", "markdown_url": "/centralgatech/courses/avmt-2286.md" }, { "id": "centralgatech-000052", "code": "AVMT 2096", "title": "Aircraft Communication and Navigation", "credits": null, "hours": null, "description": "Systems 3 Total Hours 54 AVIATION MAINTENANCE TECHNICIAN – POWERPLANT (AM61) Technical Certificate of Credit Prepares students for employment in the field of aviation ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE maintenance. The program emphasizes a combination of aircraft power plant maintenance theory and practical application. Satisfactory completion of all AMT program courses entitles students to participate in the FAA power plant examinations and certifications. CGTC is a FAA Part 147 Certificated School. New students may take AVMT occupational courses in summer and fall semester only. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: ATC/Middle GA Regional Airport Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2096", "canonical_url": "/centralgatech/courses/avmt-2096", "markdown_url": "/centralgatech/courses/avmt-2096.md" }, { "id": "centralgatech-000053", "code": "CARP 1056", "title": "Advanced Commercial Carpentry 4", "credits": null, "hours": null, "description": "Minimum Total Hours 18 CARPENTRY FUNDAMENTALS (CF21) Technical Certificate of Credit **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Introduces the student to the basic levels of carpentry skills. Topics include introduction to the trade, safety, hand and power tool usage, site layout, structural framing, building envelope systems, and exterior finishes. The program emphasizes a combination of carpentry theory and practical application necessary for successful employment. Program graduates have the qualifications of an entry-level framing carpenter. The program uses National Center for Construction Education and Research (NCCER) curriculum, which delivers standardized training and credentialing for the industry. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1056", "canonical_url": "/centralgatech/courses/carp-1056", "markdown_url": "/centralgatech/courses/carp-1056.md" }, { "id": "centralgatech-000054", "code": "MGMT 2210", "title": "Project Management 3", "credits": null, "hours": null, "description": "Minimum Total Hours 39 ADVANCED CARPENTRY (AB71) Technical Certificate of Credit **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Continuing where the carpentry fundamentals certificate ends, this program introduces the student to the more technically advanced carpentry skills. Topics include introduction to the interior finishes and trim, door and window installation, steel framing, and stair finishes. The program emphasizes a combination of carpentry theory and practical application necessary for successful employment. Program graduates have the qualifications of an entry-level finish carpenter. The program uses National Center for Construction Education and Research (NCCER) curriculum which delivers standardized training and credentialing for the industry. Conditional Program Admission: Student must be a graduate of the Carpentry Fundamentals (CF21) program or obtain advisor approval to enroll in this program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001107", "centralgatech-001109", "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2210", "canonical_url": "/centralgatech/courses/mgmt-2210", "markdown_url": "/centralgatech/courses/mgmt-2210.md" }, { "id": "centralgatech-000055", "code": "COFC 1080", "title": "| CONSTRUCTION TRADES CORE", "credits": null, "hours": null, "description": "This course introduces the student to the basic fundamentals of the construction trades. Topics include basic safety, construction math, hand and power tools, construction drawings, rigging, materials handling, and job-site communication and work ethic skills. College Life (30-0-2) This course is designed to provide tools to assist students to acquire skills necessary to achieve academic and professional success in their chosen occupational/technical program of study. Topics include: Getting off to a Good Start, Learning and Personality Styles, Time and Money Management, Study and Test Taking Skills, Stress Management and Wellness, Communication Skills, and Career Exploration.", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001035", "centralgatech-001036", "centralgatech-001037", "centralgatech-001038", "centralgatech-001039", "centralgatech-001040", "centralgatech-001044", "centralgatech-001045", "centralgatech-001052", "centralgatech-001054", "centralgatech-001058" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COFC1080", "canonical_url": "/centralgatech/courses/cofc-1080", "markdown_url": "/centralgatech/courses/cofc-1080.md" }, { "id": "centralgatech-000056", "code": "CARP 1320", "title": "| SITE DEVELOPMENT, CONCRETE", "credits": null, "hours": null, "description": "FORMING, AND RIGGING AND REINFORCING (30-60-4) This course provides instruction in the development of construction sites with an emphasis on surveying, materials and processes for concrete forming and usage, and the various methods and materials used in the handling and rigging of steel components. Cardiovascular Technology", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1320", "canonical_url": "/centralgatech/courses/carp-1320", "markdown_url": "/centralgatech/courses/carp-1320.md" }, { "id": "centralgatech-000057", "code": "CARP 1190", "title": "Advanced Residential Finishes and Decks 3", "credits": null, "hours": null, "description": "Total Hours 11 ACADEMIC PROGRAMS COMMERCIAL TRUCK DRIVING Conditions for Admission: Prospective students should be advised that the FMCSA regulates commercial driver licensing and requires a DOT physical and drug test and a satisfactory MVR prior to the issuance of a commercial driver’s license or learners permit, which is required prior to beginning in- the-truck training. Further, random drug testing is required during the course of the commercial driving program. Acceptance to CGTC and acceptance into a commercial truck driving program are two separate and distinct processes. Acceptance to the College does not guarantee acceptance to a commercial truck driving program. Applicants are accepted to a commercial truck driving program on a first-come, first- served basis. Upon entrance to a commercial truck driving program, you must be 18 years of age, have a valid Georgia driver’s license, and a Class A learner’s permit. Program entrance requirements are included in the Commercial Truck Driving Programs booklet. The Federal Motor Carrier Safety Administration has established the standard for passing the Entry-Level Driver Training (ELDT) at 80 percent. This standard is achieved by satisfactory completion (80%) of CTDL 1010 percent or above will receive the grade of Satisfactory (S) and students achieving less than 80 percent will receive the grade of Unsatisfactory (U). COMMERCIAL DRIVING - CLASS A (CT61) Technical Certificate of Credit The Commercial Driving – Class A certifi", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001041", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1190", "canonical_url": "/centralgatech/courses/carp-1190", "markdown_url": "/centralgatech/courses/carp-1190.md" }, { "id": "centralgatech-000058", "code": "CARP 1310", "title": "| DOORS AND DOOR HARDWARE", "credits": null, "hours": null, "description": "Provides instruction in the identification and installation of a variety of doors, frames, and door hardware for commercial construction applications. Topics include: door types, door hardware, thresholds, weather-stripping, and overhead doors.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1310", "canonical_url": "/centralgatech/courses/carp-1310", "markdown_url": "/centralgatech/courses/carp-1310.md" }, { "id": "centralgatech-000059", "code": "CARP 1020", "title": "Structural Framing II 3", "credits": null, "hours": null, "description": "Total Hours 13 CARPENTRY TECHNOLOGY (CT31) Technical Certificate of Credit **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Prepares students for careers in the carpentry industry. Topics include all basic carpentry skills necessary for successful employment. Program graduates have the qualifications of an entry-level residential carpenter or entry-level commercial carpenter. The program uses National Center for Construction Education and Research (NCCER) curriculum, which delivers standardized training and credentialing for the industry. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001038", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1020", "canonical_url": "/centralgatech/courses/carp-1020", "markdown_url": "/centralgatech/courses/carp-1020.md" }, { "id": "centralgatech-000060", "code": "COFC 1011", "title": "| OVERVIEW OF BUILDING CONSTRUCTION", "credits": null, "hours": null, "description": "PRACTICES AND MATERIALS (30-30-3) This course covers the introduction to a residential construction project from start to finish. Topics to include ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE on basic functions and familiarity with computer use. Topics include introductions to computer and digital terminology and usage, operating systems, Internet and digital communication, word processing applications, spreadsheet applications, database applications, and presentation applications. Human Communication", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001040", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COFC1011", "canonical_url": "/centralgatech/courses/cofc-1011", "markdown_url": "/centralgatech/courses/cofc-1011.md" }, { "id": "centralgatech-000061", "code": "COFC 1050", "title": "Construction Print Reading Fundamentals", "credits": null, "hours": null, "description": "Minimum Total Hours 9 FINISH CARPENTER (FC31) Technical Certificate of Credit The Finish Carpenter certificate program specializes in interior and exterior finishing of residential structures. Topics include exterior finishes and trim, interior finishes and trim, and cornice and soffit. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001040", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COFC1050", "canonical_url": "/centralgatech/courses/cofc-1050", "markdown_url": "/centralgatech/courses/cofc-1050.md" }, { "id": "centralgatech-000062", "code": "CTDL 1021", "title": "| COMBINATION VEHICLE BASIC", "credits": null, "hours": null, "description": "OPERATION AND RANGE WORK (15-60-3) This course familiarizes students with truck instruments and controls and performing basic maneuvers required to drive safely in a controlled environment and on the driving range. Each student must demonstrate proficiency in performing range operations such as operating a tractor trailer through clearance maneuvers, backing, turning, parallel parking and coupling/uncoupling. Co-requisite: CTDL 1010", "prerequisites": [], "program_ids": [ "centralgatech-001042" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1021", "canonical_url": "/centralgatech/courses/ctdl-1021", "markdown_url": "/centralgatech/courses/ctdl-1021.md" }, { "id": "centralgatech-000063", "code": "CTDL 1031", "title": "Combination Vehicle Advanced Operations 3", "credits": null, "hours": null, "description": "or CTDL 1032 Commercial Driving Training Internship II (3) or CTDL 1035 Combination Vehicle Advanced Operations/Automatic Restriction (3) Total Hours 9 COMMERCIAL DRIVING - Class B (CSQ1) Technical Certificate of Credit The Commercial Driving – Class B certificate program provides basic training in the principles and skills of commercial class B vehicle driving operations. Through this program, students will obtain the necessary knowledge, skills, and attitudes to enable them to become a safe, skilled, professional, class B commercial vehicle driver. It teaches them to operate commercial straight trucks, school buses and passenger vehicles of all different sizes and descriptions on all types of roads. The program prepares students for the Georgia CDL Skills Exam. Education Requirements Admission: DOT Physical and Class A Learner Permit Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: 18 Location(s) Offered: Peach Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001042" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1031", "canonical_url": "/centralgatech/courses/ctdl-1031", "markdown_url": "/centralgatech/courses/ctdl-1031.md" }, { "id": "centralgatech-000064", "code": "CTDL 1051", "title": "| STRAIGHT VEHICLE BASIC OPERATIONS", "credits": null, "hours": null, "description": "AND RANGE WORK (15-60-3) This course familiarizes students with truck instruments and controls and performing basic maneuvers required to drive safely in a controlled environment and on the driving range. Each student must demonstrate proficiency in performing range operations such as operating a commercial straight vehicle through clearance maneuvers, backing, turning, and parallel parking. Co-requisite: CTDL 1010", "prerequisites": [], "program_ids": [ "centralgatech-001043" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1051", "canonical_url": "/centralgatech/courses/ctdl-1051", "markdown_url": "/centralgatech/courses/ctdl-1051.md" }, { "id": "centralgatech-000065", "code": "CTDL 1061", "title": "Striaght Vehicle Advanced Operations 3", "credits": null, "hours": null, "description": "or CTDL 1032 Commercial Driving Training Internship II (3) Total Hours 9 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE CONSTRUCTION MANAGEMENT TECHNOLOGY CONSTRUCTION MANAGEMENT TECHNOLOGY (CMT3) Associate Degree **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Designed for students who want to work in some aspect of construction supervision as a foreman, project manager, carpenter foreman, lead carpenter and other positions with in the construction field. Students will be able to print read, develop hands on carpentry skills, and develop accounting, supervision and management skills after completion of the program. The program uses National Center for Construction Education and Research (NCCER) curriculum which delivers standardized training and credentialing for the industry. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001043" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1061", "canonical_url": "/centralgatech/courses/ctdl-1061", "markdown_url": "/centralgatech/courses/ctdl-1061.md" }, { "id": "centralgatech-000066", "code": "CARP 1035", "title": "| ADVANCED CARPENTRY I", "credits": null, "hours": null, "description": "Advanced Carpentry I continues the progression of carpentry skills to include specialty skills including drywall installation and finishing, suspended ceilings, door and drawer hardware, interior finish trim procedures, and cabinet installation. Prerequisite: CARP 1000, COFC 1080", "prerequisites": [ "CARP 1000", "COFC 1080" ], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1035", "canonical_url": "/centralgatech/courses/carp-1035", "markdown_url": "/centralgatech/courses/carp-1035.md" }, { "id": "centralgatech-000067", "code": "CMTT 2020", "title": "| CONSTRUCTION DRAFTING I", "credits": null, "hours": null, "description": "This course provides instruction in producing residential floor plans and elevations using computer-aided drafting and design (CAD) software. Topics include system setup and system management, software menus and basic functions, prototype drawings, and two and three dimensional drafting and dimensioning.", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CMTT2020", "canonical_url": "/centralgatech/courses/cmtt-2020", "markdown_url": "/centralgatech/courses/cmtt-2020.md" }, { "id": "centralgatech-000068", "code": "ACCT 2140", "title": "| LEGAL ENVIRONMENT OF BUSINESS", "credits": null, "hours": null, "description": "(45-0-3) Introduces law and its relationship to business. Topics include legal ethics, legal processes, business contracts, business tort and crimes, real and personal property, agency and employment, risk-bearing devices, and Uniform Commercial Code. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001044", "centralgatech-001045", "centralgatech-001046", "centralgatech-001090", "centralgatech-001092", "centralgatech-001093", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2140", "canonical_url": "/centralgatech/courses/acct-2140", "markdown_url": "/centralgatech/courses/acct-2140.md" }, { "id": "centralgatech-000069", "code": "CARP 1114", "title": "| INTERIOR FINISHES", "credits": null, "hours": null, "description": "This course introduces the procedures and methods for identifying materials, cost estimating, and installation of interior finishes and trim. Topics include materials identification; cost estimating, trim, insulation, doors, gypsum wallboard, and paneling used in finishing jobs.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001041", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1114", "canonical_url": "/centralgatech/courses/carp-1114", "markdown_url": "/centralgatech/courses/carp-1114.md" }, { "id": "centralgatech-000070", "code": "CCMN 2010", "title": "Construction Law 3", "credits": null, "hours": null, "description": "or ACCT 2140 Legal Environment of Business (3)", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CCMN2010", "canonical_url": "/centralgatech/courses/ccmn-2010", "markdown_url": "/centralgatech/courses/ccmn-2010.md" }, { "id": "centralgatech-000071", "code": "CCMN 2020", "title": "Construction Scheduling 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Elective(s) 3 Minimum Total Hours 15 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE DIESEL EQUIPMENT TECHNOLOGY DIESEL ELECTRICAL/ELECTRONIC SYSTEMS TECHNICIAN (DE11) Technical Certificate of Credit Provides the student with training for becoming an entry- level diesel electrical/electronic systems technician. The topics presented include diesel shop safety and tool use, basic electrical and electronics theory, starting and charging systems, and electronic controls and accessory systems. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CCMN2020", "canonical_url": "/centralgatech/courses/ccmn-2020", "markdown_url": "/centralgatech/courses/ccmn-2020.md" }, { "id": "centralgatech-000072", "code": "MGMT 1120", "title": "| INTRODUCTION TO BUSINESS", "credits": null, "hours": null, "description": "This course is designed to provide the student with an overview of the functions of business in the market system. The student will gain an understanding of the numerous decisions that must be made by managers and owners of businesses. Topics include: the market system, the role of supply and demand, financial management, legal issues in business, employee relations, ethics, and marketing.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001106", "centralgatech-001107", "centralgatech-001112", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1120", "canonical_url": "/centralgatech/courses/mgmt-1120", "markdown_url": "/centralgatech/courses/mgmt-1120.md" }, { "id": "centralgatech-000073", "code": "DIET 1010", "title": "Diesel Electrical and Electronic Systems 7", "credits": null, "hours": null, "description": "or DIET 1011 Diesel Electrical and Electronic Systems I (4) and DIET 1012 Diesel Electrical and Electronic Systems II (3) Total Hours 10 DIESEL ENGINE SERVICE TECHNICIAN (DE21) Technical Certificate of Credit The Diesel Engine Service Technician certificate program provides students training to become an entry-level diesel engine service technician. The topics covered include diesel shop safety, tools and equipment, diesel electrical/electronic systems, and diesel engines and support systems. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001047", "centralgatech-001048", "centralgatech-001049", "centralgatech-001050", "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1010", "canonical_url": "/centralgatech/courses/diet-1010", "markdown_url": "/centralgatech/courses/diet-1010.md" }, { "id": "centralgatech-000074", "code": "DIET 1000", "title": "| INTRODUCTION TO DIESEL TECHNOLOGY", "credits": null, "hours": null, "description": "TOOLS, AND SAFETY (20-58-3) This course introduces basic knowledge and skills the student must have to succeed in the Diesel Equipment Technology field. Topics include an overview of diesel powered vehicles, diesel technology safety skills, basic tools and equipment, reference materials, measuring instruments, shop operation, mechanical fasteners, welding safety, and basic welding skills. Classroom and lab experiences on safety, precision measuring, and basic shop practices are highly emphasized.", "prerequisites": [], "program_ids": [ "centralgatech-001047", "centralgatech-001048", "centralgatech-001049", "centralgatech-001050", "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1000", "canonical_url": "/centralgatech/courses/diet-1000", "markdown_url": "/centralgatech/courses/diet-1000.md" }, { "id": "centralgatech-000075", "code": "DIET 1030", "title": "Diesel Engines 6", "credits": null, "hours": null, "description": "or DIET 1031 Diesel Engine Repair (3) and DIET 1032 Diesel Engine Support Systems (3) Total Hours 16 DIESEL EQUIPMENT FUNDAMENTALS (DEF1) Technical Certificate of Credit The Diesel Equipment Fundamentals certificate program is designed to introduce knowledge and skills to be successful in performing preventative maintenance and repair on diesel engines and equipment. Topics include an overview of diesel powered vehicles, safety, tools and equipment, basic welding skills, electrical and electronic systems, and drive train systems on medium and heavy duty trucks. Education Requirements Admission: None Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001048", "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1030", "canonical_url": "/centralgatech/courses/diet-1030", "markdown_url": "/centralgatech/courses/diet-1030.md" }, { "id": "centralgatech-000076", "code": "DIET 2020", "title": "Truck Drive Trains 4", "credits": null, "hours": null, "description": "Total Hours 23 ACADEMIC PROGRAMS HEAVY DIESEL SERVICE TECHNICIAN (HD31) Technical Certificate of Credit The Heavy Diesel Service Technician certificate program provides training in both theory, diagnosis, and repair of basic systems on diesel engines and diesel equipment. Program instruction includes shop safety, shop equipment, diesel engines and fuel systems, electrical and electronic systems, off road power trains, and heavy equipment hydraulics. Successful completion of this program will prepare the student for entering industry as an entry-level diesel service technician. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001049", "centralgatech-001050" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET2020", "canonical_url": "/centralgatech/courses/diet-2020", "markdown_url": "/centralgatech/courses/diet-2020.md" }, { "id": "centralgatech-000077", "code": "DIET 2011", "title": "| OFF-ROAD DRIVELINES", "credits": null, "hours": null, "description": "This course introduces power trains used on heavy equipment such as bulldozers, excavators, wheel loaders, back-hoe loaders and skidders. Classroom and lab instruction on components and systems with use and interpreting testing and diagnosing equipment are highly emphasized. Topics include: power train theory and principles, clutches, manual transmissions, drive shafts, differentials, final drives, special drives, final drive failure analysis, torque converters, hydraulically shifted transmissions, electronic transmissions, hydrostatic transmissions, and transmission failure analysis. Design and Media Production ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [ "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET2011", "canonical_url": "/centralgatech/courses/diet-2011", "markdown_url": "/centralgatech/courses/diet-2011.md" }, { "id": "centralgatech-000078", "code": "DIET 1040", "title": "Diesel Truck and Heavy Equipment", "credits": null, "hours": null, "description": "HVAC Systems 3 or DIET 1050 Diesel Equipment Technology Internship (4) Minimum Total Hours 32 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ELECTRICAL SYSTEMS TECHNOLOGY ELECTRICAL SYSTEMS CONSTRUCTION AND MAINTENANCE (ES22) Diploma **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Provides instruction in the inspection, maintenance, installation, and repair of electrical systems in residential, commercial, and industrial environments. A combination of theory and practical application is emphasized to develop academic, technical, and professional knowledge and skills. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1040", "canonical_url": "/centralgatech/courses/diet-1040", "markdown_url": "/centralgatech/courses/diet-1040.md" }, { "id": "centralgatech-000079", "code": "ELTR 1055", "title": "Advanced Electrical Concepts II 4", "credits": null, "hours": null, "description": "Total Hours 12 RESIDENTIAL WIRING TECHNICIAN (RW61) Technical Certificate of Credit The Residential Wiring Technician TCC program is designed to introduce students to residential wiring techniques. Upon completion, students will be ready to enter the electrical field as electrical apprentices. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001056" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1055", "canonical_url": "/centralgatech/courses/eltr-1055", "markdown_url": "/centralgatech/courses/eltr-1055.md" }, { "id": "centralgatech-000080", "code": "ELTR 1540", "title": "Wire Pulling and Codes 3", "credits": null, "hours": null, "description": "Total Hours 44 ELECTRICAL SYSTEMS TECHNOLOGY (ES12) Diploma The Electrical Systems Technology program provides instruction in the inspection, maintenance, installation, and repair of electrical systems in the residential, commercial, and industrial industries. A combination of theory and practical application is emphasized to develop academic, technical, and professional knowledge and skills. Program graduates receive a diploma in Electrical Systems Technology with a specialization in residential or industrial applications. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1540", "canonical_url": "/centralgatech/courses/eltr-1540", "markdown_url": "/centralgatech/courses/eltr-1540.md" }, { "id": "centralgatech-000081", "code": "ELTR 1180", "title": "| ELECTRICAL CONTROLS", "credits": null, "hours": null, "description": "This course introduces line and low voltage switching circuits, manual and automatic controls and devices, and circuits. Emphasis will be placed on switching circuits, manual and automatic controls and devices, line and low voltage switching circuits, and operation, application and ladder diagrams. Topics include ladder and wire diagrams, switching circuits, manual controls and devices, automatic controls and devices, and application and operation of controllers and controls.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1180", "canonical_url": "/centralgatech/courses/eltr-1180", "markdown_url": "/centralgatech/courses/eltr-1180.md" }, { "id": "centralgatech-000082", "code": "ELTR 1210", "title": "Residential Wiring II 3", "credits": null, "hours": null, "description": "Total Hours 13 SPECIALITY ELECTRICAL SERVICES (SE11) Technical Certificate of Credit **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Introduces the student to special situations found in the electrical construction industry. Topics include specialty load calculations, health care facilities, fire alarms, transformers, advanced controls, HVAC controls, and motor operation and maintenance. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001057" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1210", "canonical_url": "/centralgatech/courses/eltr-1210", "markdown_url": "/centralgatech/courses/eltr-1210.md" }, { "id": "centralgatech-000083", "code": "ELTR 1270", "title": "National Electric Code Industrial", "credits": null, "hours": null, "description": "Applications 4 Total Hours 19 INTERMEDIATE ELECTRICAL SYSTEMS TECHNICIAN (IE61) Technical Certificate of Credit **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Serves as a continuation of the skills needed to be successful as an electrical systems technician. Topics include terminations and splices, circuit breakers and fuses, control systems, load calculations, conductors, lighting applications, hazardous locations, over-current protection, distribution equipment, transformers, commercial electrical services, motor calculations, and voice, data and video. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001055", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1270", "canonical_url": "/centralgatech/courses/eltr-1270", "markdown_url": "/centralgatech/courses/eltr-1270.md" }, { "id": "centralgatech-000084", "code": "ELTR 1015", "title": "Intermediate Electrical Concepts I 4", "credits": null, "hours": null, "description": "Total Hours 12 COMMERCIAL ELECTRICAL CONSTRUCTION TECHNICIAN (CEC1) Technical Certificate of Credit Designed for careers in the electrical construction industry. A combination of basic concepts, theory, and practical application is utilized to develop academic, technical, and professional knowledge and skills. Topics include safety practices, basic residential electrical installations and building prints, plans, and general construction basics. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: VECTR Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001054" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1015", "canonical_url": "/centralgatech/courses/eltr-1015", "markdown_url": "/centralgatech/courses/eltr-1015.md" }, { "id": "centralgatech-000085", "code": "IDFC 1007", "title": "| INDUSTRIAL SAFETY PROCEDURES", "credits": null, "hours": null, "description": "(15-30-2) Provides an in-depth study of the health and safety practices required for maintenance of industrial, commercial, and home electrically operated equipment. Topics include introduction to OSHA regulations; safety tools, equipment, and procedures; and first aid and cardiopulmonary resuscitation.", "prerequisites": [], "program_ids": [ "centralgatech-001012", "centralgatech-001015", "centralgatech-001053", "centralgatech-001057", "centralgatech-001059", "centralgatech-001072", "centralgatech-001073", "centralgatech-001137", "centralgatech-001138", "centralgatech-001140", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDFC1007", "canonical_url": "/centralgatech/courses/idfc-1007", "markdown_url": "/centralgatech/courses/idfc-1007.md" }, { "id": "centralgatech-000086", "code": "ELTR 1075", "title": "Specialty Electrical Concepts II 4", "credits": null, "hours": null, "description": "Minimum Total Hours 16 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ELECTRONICS TECHNOLOGY ELECTRONICS TECHNOLOGY (ET13) Associate Degree Prepares students for careers in electronics professions. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of electronics technology theory and practical application necessary for successful employment using both manual and computerized electronics systems. Program graduates are qualified as electronics technicians with a specialization in biomedical instrumentation or a direction towards a field of occupation found within electronics. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001058" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1075", "canonical_url": "/centralgatech/courses/eltr-1075", "markdown_url": "/centralgatech/courses/eltr-1075.md" }, { "id": "centralgatech-000087", "code": "ELCR 1110", "title": "Direct Current Circuits 3", "credits": null, "hours": null, "description": "Total Hours 9 BASIC ELECTRONIC TECHNICIAN (BE81) Technical Certificate of Credit The Basic Electronics Technician technical certificate provides students a basic understanding of electronic circuits. Students will take courses on DC circuits, AC circuits, and soldering techniques to prepare them for a career as an Electrician Technician I or equivalent. Education Requirements Admission: None Graduation: None Placement Score: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001060", "centralgatech-001061", "centralgatech-001062" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1110", "canonical_url": "/centralgatech/courses/elcr-1110", "markdown_url": "/centralgatech/courses/elcr-1110.md" }, { "id": "centralgatech-000088", "code": "ELCR 1120", "title": "| ALTERNATING CURRENT CIRCUITS", "credits": null, "hours": null, "description": "3) This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current. Topics include introduction to safety procedures and regulations, magnetism, AC wave generation, inductance and capacitance, transformer application, and test equipment. Prerequisite: ELCR 1110", "prerequisites": [ "ELCR 1110" ], "program_ids": [ "centralgatech-001059", "centralgatech-001060", "centralgatech-001062" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1120", "canonical_url": "/centralgatech/courses/elcr-1120", "markdown_url": "/centralgatech/courses/elcr-1120.md" }, { "id": "centralgatech-000089", "code": "ELCR 1150", "title": "Basic Microprocessors and Embedded", "credits": null, "hours": null, "description": "Systems 4 Total Hours 40 ELECTRONICS TECHNOLOGY (ET14) Diploma Prepares students for careers in electronics technology professions. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. Program graduates are to be competent in the general areas of communications, mathematics, computer literacy, and interpersonal relations. The program emphasizes a combination of electronics technology theory and practical application necessary for successful employment using both manual and computerized electronics systems. Program graduates are qualified as electronics technicians with a specialization in biomedical instrumentation or a direction towards a field of occupation found within electronics. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001060" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1150", "canonical_url": "/centralgatech/courses/elcr-1150", "markdown_url": "/centralgatech/courses/elcr-1150.md" }, { "id": "centralgatech-000090", "code": "ALHS 1010", "title": "| INTRODUCTION TO ANATOMY AND", "credits": null, "hours": null, "description": "PHYSIOLOGY (60-0-4) This course provides a study of medical terminology and the basic study of structure and function of the human body. It provides an overview of the functions of each body system and the medical terminology associated with each system. This course is intended for students in non-medical programs and is designed to provide medical terminology and basic knowledge of anatomy and physiology.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1010", "canonical_url": "/centralgatech/courses/alhs-1010", "markdown_url": "/centralgatech/courses/alhs-1010.md" }, { "id": "centralgatech-000091", "code": "BMET 2343", "title": "| INTERNSHIP MEDICAL SYSTEMS", "credits": null, "hours": null, "description": "This course introduces the student to an on-site learning experience at an operating biomedical equipment section of a health care facility. Supervision of the intern is shared by the working environment supervisor and the faculty advisor. Internist performance is evaluated at weekly seminars. Topics include: problem solving, use of proper interpersonal skills, interpreting work authorizations, identifying logistical support requirements, servicing biomedical instruments, evaluating operating cost, and professional development. Prerequisite: BMET 1231 Literary Braille Transcription", "prerequisites": [], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BMET2343", "canonical_url": "/centralgatech/courses/bmet-2343", "markdown_url": "/centralgatech/courses/bmet-2343.md" }, { "id": "centralgatech-000092", "code": "ELCR 2250", "title": "| OPTICAL COMMUNICATIONS TECHNIQUES", "credits": null, "hours": null, "description": "(30-30-3) Surveys the major optical devices used for communications. Topics include: light sources, fiber optic cable, coupling and fusing, light modulation and detection techniques, and system application of light devices. Prerequisite: ELCR 1020", "prerequisites": [ "ELCR 1020" ], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2250", "canonical_url": "/centralgatech/courses/elcr-2250", "markdown_url": "/centralgatech/courses/elcr-2250.md" }, { "id": "centralgatech-000093", "code": "SCMA 1004", "title": "Quality Improvement Concepts 3", "credits": null, "hours": null, "description": "or ASTT 1051 Aerospace Quality Management (2) Total Hours 20 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MARKETING MARKETING (MM13) Associate Degree Prepares students for employment in a variety of positions in today’s marketing and management fields. The Marketing program provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of marketing management. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 15 Area I - English/Humanities/Fine Arts", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001137", "centralgatech-001138", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1004", "canonical_url": "/centralgatech/courses/scma-1004", "markdown_url": "/centralgatech/courses/scma-1004.md" }, { "id": "centralgatech-000094", "code": "ELCR 1125", "title": "Advanced DC and AC Circuits 4", "credits": null, "hours": null, "description": "Total Hours 16 ACADEMIC PROGRAMS ENGINEERING TECHNOLOGY ENGINEERING TECHNOLOGY (ET33) Associate Degree Provides the opportunity for students to explore a career in engineering at the professional level. Program graduates are qualified as engineering technicians with a specialization in mechanical engineering technology, electrical engineering technology, or industrial engineering technology. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 16 Area I - Language Arts Communication", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001060", "centralgatech-001062" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1125", "canonical_url": "/centralgatech/courses/elcr-1125", "markdown_url": "/centralgatech/courses/elcr-1125.md" }, { "id": "centralgatech-000095", "code": "HIST 1111", "title": "| WORLD HISTORY I", "credits": null, "hours": null, "description": "This course emphasizes the study of intellectual, cultural, scientific, political, and social contributions of the civilizations of the world and the evolution of these civilizations during the period from the prehistoric era to early modern times. Topics include the Prehistoric Era the Ancient Near East, Ancient India, Ancient China, Ancient Rome, Ancient Africa, Islam, the Americas, Japan, Ancient Greece, the Middle Ages, and the Renaissance. Prerequisite: Appropriate Degree-Level English and Reading Placement Test Scores", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIST1111", "canonical_url": "/centralgatech/courses/hist-1111", "markdown_url": "/centralgatech/courses/hist-1111.md" }, { "id": "centralgatech-000096", "code": "MATH 1113", "title": "Precalculus 3", "credits": null, "hours": null, "description": "XXXX xxxx Advisor Approved Elective (1000 series or above) 3 Minimum Total Hours 9 INDUSTRIAL ENGINEERING TECHNICIAN (IM51) Technical Certificate of Credit The Industrial Engineering Technician certificate program introduces the principles of industrial engineering and mathematics and aligns to the Industrial Engineering specialization embedded in the Engineering Technology degree. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001066", "centralgatech-001067", "centralgatech-001068", "centralgatech-001069", "centralgatech-001070" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1113", "canonical_url": "/centralgatech/courses/math-1113", "markdown_url": "/centralgatech/courses/math-1113.md" }, { "id": "centralgatech-000097", "code": "ARTS 1101", "title": "| ART APPRECIATION", "credits": null, "hours": null, "description": "Explores the visual arts and the relationship to human needs and aspirations. Students investigate the value of art, themes in art, the elements and principles of composition, and the materials and processes used for artistic expression. Well-known works of visual art are explored. The course encourages student interest in the visual arts beyond the classroom. Prerequisite: Appropriate degree level writing (English) and reading placement test scores Aircraft Structural Technology", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001063", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ARTS1101", "canonical_url": "/centralgatech/courses/arts-1101", "markdown_url": "/centralgatech/courses/arts-1101.md" }, { "id": "centralgatech-000098", "code": "ECET 1101", "title": "| CIRCUIT ANALYSIS I", "credits": null, "hours": null, "description": "This course emphasizes the knowledge and ability to analyze basic DC circuits and introductory concepts of AC circuits. Topics include international units, basic electrical laws, series and parallel circuits, network analysis concepts, network theorems concepts, D.C. instruments, grounding techniques, magnetism, inductance/capacitance, transient analysis, and introduction to dependent sources and 2-port parameters. Laboratory work parallels class work. Co-requisite: ENGT 1000", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001067" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1101", "canonical_url": "/centralgatech/courses/ecet-1101", "markdown_url": "/centralgatech/courses/ecet-1101.md" }, { "id": "centralgatech-000099", "code": "ECET 1110", "title": "| DIGITAL SYSTEMS I", "credits": null, "hours": null, "description": "This course is a study of digital circuit fundamentals with an emphasis on digital electronics and techniques, simplification of logic circuits, sequential and combinational logic circuits, programmable logic devices, flip-flops and registers, binary number system, and arithmetic and logic operations. Laboratory work parallels class work using trainers, DesignWorks, and Altera simulation software and system. Prerequisite: ENGT 1000", "prerequisites": [ "ENGT 1000" ], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1110", "canonical_url": "/centralgatech/courses/ecet-1110", "markdown_url": "/centralgatech/courses/ecet-1110.md" }, { "id": "centralgatech-000100", "code": "ECET 2101", "title": "| CIRCUIT ANALYSIS II", "credits": null, "hours": null, "description": "This course continues the study of AC circuit analysis which emphasizes complex networks. Topics include analysis of complex networks, networks with multiple sources, AC network theorems, resonance, transformers, three-phase systems, filters and bode plots, non-sinusoidal waveforms, and pulse response of RLC circuits. Laboratory work parallels class work. Prerequisite: ECET 1101, MATH 1111", "prerequisites": [ "ECET 1101", "MATH 1111" ], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2101", "canonical_url": "/centralgatech/courses/ecet-2101", "markdown_url": "/centralgatech/courses/ecet-2101.md" }, { "id": "centralgatech-000101", "code": "ECET 2120", "title": "| ELECTRONIC CIRCUITS I", "credits": null, "hours": null, "description": "This course introduces the conduction process in semiconductor materials and devices. Topics include semiconductor physics; diodes; basic diode circuits and applications; biasing, stability and graphical analysis of bipolar junction transistors and field effect transistors; introduction to silicon-controlled rectifiers; device curve characteristics; and related devices with selected applications. Laboratory work includes circuit construction, use of appropriate instruments, troubleshooting and circuit simulation using P-SPICE.", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2120", "canonical_url": "/centralgatech/courses/ecet-2120", "markdown_url": "/centralgatech/courses/ecet-2120.md" }, { "id": "centralgatech-000102", "code": "MATH 1132", "title": "| CALCULUS II", "credits": null, "hours": null, "description": "This course includes the study of techniques of integration, application of the definite integral, an introduction to differential equations, improper integrals, sequences, and series. Prerequisite: MATH 1131 with a grade of C or better OR appropriate math placement score Machine Tool", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1132", "canonical_url": "/centralgatech/courses/math-1132", "markdown_url": "/centralgatech/courses/math-1132.md" }, { "id": "centralgatech-000103", "code": "CIST 2341", "title": "| C# PROGRAMMING I", "credits": null, "hours": null, "description": "This course is designed to teach the basic concepts and methods of objected-oriented design and C#.Net programming. Use practical problems to illustrate C#.Net application building techniques and concepts. Develop an understanding of C#.Net vocabulary. Create an understanding of where C#.Net fits in the application development landscape. Create an understanding of the C#.Net Development Environment, Visual Studio and how to develop, debug, and run C#.Net applications using the Visual Studio. Continue to develop student’s programming logic skills. Topics include: C#.NET Language History, C#.NET Variable Definitions, C#.NET Control Structures, C#.NET Functions, C#.NET Classes, C#.NET Objects, and C#.NET Graphics. Prerequisite: CIST 1305", "prerequisites": [ "CIST 1305" ], "program_ids": [ "centralgatech-001063", "centralgatech-001125", "centralgatech-001135", "centralgatech-001136", "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2341", "canonical_url": "/centralgatech/courses/cist-2341", "markdown_url": "/centralgatech/courses/cist-2341.md" }, { "id": "centralgatech-000104", "code": "MEGT 1321", "title": "Machining and Welding 2", "credits": null, "hours": null, "description": "IDFC XXXX Any IDFC course** 3 IDSY XXXX Any IDSY course** 3 Minimum Total Hours 22 **Students may take any course except those specifically excluded or those required by the program MECHANICAL ENGINEERING TECHNICIAN (MN71) Technical Certificate of Credit The Mechanical Engineering Technician certificate program introduces the principles of mechanical engineering and mathematics and aligns to the Mechanical Engineering specialization embedded in the Engineering Technology degree. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001069" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MEGT1321", "canonical_url": "/centralgatech/courses/megt-1321", "markdown_url": "/centralgatech/courses/megt-1321.md" }, { "id": "centralgatech-000105", "code": "MEGT 2080", "title": "| STRENGTH OF MATERIALS", "credits": null, "hours": null, "description": "This course studies the behavior of materials when subjected to different loadings and constraints. Topics include stress, strain, material properties, properties of cross sectional areas, bending and buckling of members, beam and column analysis, torsion and combined loading. Emphasis is provided on predicting material behavior in various mechanical applications and utilizing fundamental analysis techniques to determine stress in solids under tension, compression, torsion and/or shear. The course includes hands on laboratory exercises such as evaluating beam deflection and the thermal expansion of various metals. Prerequisite: MEGT 2030 Medical Laboratory Technology", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MEGT2080", "canonical_url": "/centralgatech/courses/megt-2080", "markdown_url": "/centralgatech/courses/megt-2080.md" }, { "id": "centralgatech-000106", "code": "SOCI 1101", "title": "Introduction to Sociology 3", "credits": null, "hours": null, "description": "Minimum Total Hours 63 **Students may take any course except those specifically excluded or those required by the program ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE DRAFTER’S ASSISTANT (DA31) Technical Certificate of Credit Endows students with the prospect to begin on the career pathway toward advancement in the drafting profession. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in drafting practices and software. This program could also serve as an exit point for high school dual enrolled students needing a point of exit for employment purposes. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SOCI1101", "canonical_url": "/centralgatech/courses/soci-1101", "markdown_url": "/centralgatech/courses/soci-1101.md" }, { "id": "centralgatech-000107", "code": "DFTG 1103", "title": "| MULTIVIEW/BASIC DIMENSIONING", "credits": null, "hours": null, "description": "(30-60-4) Multiview/Basic Dimensioning course provides multiview and pictorial sketching, orthographic drawing and fundamental dimensioning methods necessary to develop 2D and 3D views that completely describe machine parts for manufacture using intermediate CAD software techniques.", "prerequisites": [], "program_ids": [ "centralgatech-001064" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1103", "canonical_url": "/centralgatech/courses/dftg-1103", "markdown_url": "/centralgatech/courses/dftg-1103.md" }, { "id": "centralgatech-000108", "code": "MGMT 1135", "title": "| MANAGERIAL ACCOUNTING AND", "credits": null, "hours": null, "description": "FINANCE (45-0-3) The focus of this course is to acquire the skills and concepts necessary to use accounting information in managerial decision making. Course is designed for those who will use, not necessarily prepare, accounting information. Those applications include the use of information for short and long term planning, operational control, investment decisions, cost and pricing products and services. An overview of financial accounting and basic concepts of finance provides an overview of financial statement analysis. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001107" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1135", "canonical_url": "/centralgatech/courses/mgmt-1135", "markdown_url": "/centralgatech/courses/mgmt-1135.md" }, { "id": "centralgatech-000109", "code": "PHYS 1111", "title": "Introductory Physics 3", "credits": null, "hours": null, "description": "and PHYS 1111L Introductory Physics Lab 1 Total Minimum Hours 77 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE PSYCHOLOGY ASSOCIATE OF SCIENCE IN PSYCHOLOGY (AE93) Associate Degree The Associate of Science Degree in Psychology provides students with a solid foundation of knowledge regarding the science of human thought, behavior, and emotion, both individual and collective. Courses are intended to foster the development of cultural, personal, and professional awareness, as well as to strengthen critical thinking, technological, and communication skills. Graduates may pursue additional education opportunities at four-year institutions or pursue a variety of entry-level positions in the career fields of education, counseling, criminal justice, medical or social services, and business. Additionally, graduates would be eligible to articulate to select 4-year institutions without loss of credit and having met the number of credit hours necessary for a 2+2 transfer to a B.S. in Psychology. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Associate Degree Level Requirement Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 42 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001067", "centralgatech-001069", "centralgatech-001070" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1111", "canonical_url": "/centralgatech/courses/phys-1111", "markdown_url": "/centralgatech/courses/phys-1111.md" }, { "id": "centralgatech-000110", "code": "CIST 1305", "title": "Program Design and Development 3", "credits": null, "hours": null, "description": "or ELCR XXXX Any ELCR course** (4) Minimum Total Hours 21 **Students may take any course except those specifically excluded or those required by the program ENGINEERING GRAPHICS TECHNICIAN (EGT1) Technical Certificate of Credit The Engineering Graphics Technician certificate program introduces the basics of CAD software as it is used in engineering technology. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001063", "centralgatech-001065", "centralgatech-001068", "centralgatech-001069", "centralgatech-001070", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001135", "centralgatech-001136", "centralgatech-001150", "centralgatech-001151", "centralgatech-001161", "centralgatech-001164", "centralgatech-001170", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1305", "canonical_url": "/centralgatech/courses/cist-1305", "markdown_url": "/centralgatech/courses/cist-1305.md" }, { "id": "centralgatech-000111", "code": "DFTG 1113", "title": "Assembly Drawings 4", "credits": null, "hours": null, "description": "Total Hours 22 ACADEMIC PROGRAMS ENGINEERING TECHNOLOGY BASICS (EBT1) Technical Certificate of Credit Provides training in core engineering techniques, including drafting and design, complex mathematical calculations, and force evaluation. Topics also include engineering project write-ups, presentation, evaluation, and safety. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001066" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1113", "canonical_url": "/centralgatech/courses/dftg-1113", "markdown_url": "/centralgatech/courses/dftg-1113.md" }, { "id": "centralgatech-000112", "code": "CHEM 1211", "title": "| CHEMISTRY I", "credits": null, "hours": null, "description": "Provides an introduction to basic chemical principles and concepts which explain the behavior of matter. Topics include measurement, physical and chemical properties of matter, atomic structure, chemical bonding, nomenclature, chemical reactions, and stoichiometry and gas laws. Prerequisite: MATH 1101 or MATH 1103 or MATH 1111 Co-requisite: CHEM 1211L", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001067" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM1211", "canonical_url": "/centralgatech/courses/chem-1211", "markdown_url": "/centralgatech/courses/chem-1211.md" }, { "id": "centralgatech-000113", "code": "DFTG 1101", "title": "| CAD FUNDAMENTALS", "credits": null, "hours": null, "description": "Establishes safety practices as they relate to a drafting environment. Introduces basic CAD functions while presenting essential principles and practices for line relationships, scale, and geometric construction.", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046", "centralgatech-001059", "centralgatech-001063", "centralgatech-001064", "centralgatech-001066", "centralgatech-001067", "centralgatech-001068", "centralgatech-001069", "centralgatech-001070", "centralgatech-001076" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1101", "canonical_url": "/centralgatech/courses/dftg-1101", "markdown_url": "/centralgatech/courses/dftg-1101.md" }, { "id": "centralgatech-000114", "code": "AUMF 1150", "title": "Introduction to Robotics 3", "credits": null, "hours": null, "description": "CIST 23XX Any CIST 23XX course** 4 ECET XXXX Any ECET course** 4 MEGT XXXX Any MEGT course** 4 Total Hours 23 **Students may take any course except those specifically excluded or those required by the program ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MECHATRONICS TECHNOLOGY MECHATRONICS TECHNOLOGY (MT23) Associate Degree The Mechatronics Technology Degree program is designed for the student who wishes to prepare for a career as a Mechatronics technician/electrician. The program provides learning opportunities that introduce, develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The Degree program teaches skills in Mechatronics Technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, PLCs, instrumentation, fluid power, mechanical, pumps and piping, and computers. Graduates of the program receive a Mechatronics Technology Degree that qualifies them for employment as industrial electricians or Mechatronics technicians. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: Standard Location(s) Offered: Milledgeville Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001007", "centralgatech-001068", "centralgatech-001069", "centralgatech-001070", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1150", "canonical_url": "/centralgatech/courses/aumf-1150", "markdown_url": "/centralgatech/courses/aumf-1150.md" }, { "id": "centralgatech-000115", "code": "IDFC 1013", "title": "| SOLID STATE DEVICES I", "credits": null, "hours": null, "description": "Introduces the physical characteristics and applications of solid state devices. Topics include introduction to semiconductor fundamentals, diode applications, basic transistor fundamentals, basic amplifiers, and semiconductor switching devices. Prerequisite: IDSY 1101, IDFC 1012 OR IDSY 1105 Industrial Systems", "prerequisites": [], "program_ids": [ "centralgatech-001071", "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDFC1013", "canonical_url": "/centralgatech/courses/idfc-1013", "markdown_url": "/centralgatech/courses/idfc-1013.md" }, { "id": "centralgatech-000116", "code": "IDSY 1101", "title": "| DC CIRCUIT ANALYSIS", "credits": null, "hours": null, "description": "This course introduces direct current (DC) concepts and applications. Topics include electrical principles and laws, batteries, DC test equipment, Series, parallel, simple combination circuits, laboratory procedures and safety practices.", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001014", "centralgatech-001053", "centralgatech-001059", "centralgatech-001060", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1101", "canonical_url": "/centralgatech/courses/idsy-1101", "markdown_url": "/centralgatech/courses/idsy-1101.md" }, { "id": "centralgatech-000117", "code": "IDSY 1105", "title": "| AC CIRCUIT ANALYSIS", "credits": null, "hours": null, "description": "This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001014", "centralgatech-001053", "centralgatech-001057", "centralgatech-001059", "centralgatech-001060", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1105", "canonical_url": "/centralgatech/courses/idsy-1105", "markdown_url": "/centralgatech/courses/idsy-1105.md" }, { "id": "centralgatech-000118", "code": "METR 2211", "title": "| INTRODUCTION TO AUTOMATED", "credits": null, "hours": null, "description": "METROLOGY (15-60-3) This course covers the proper use and ability to program automated test instruments by string command. Hewlett Packard SCPE commands using HP Basic and MET/CAL software packages. This course also covers laboratory managed software like CMI’s Benchtop and MET/CAL. Prerequisite: METR 2111, METR 2121, METR 2131 Business Management", "prerequisites": [], "program_ids": [ "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR2211", "canonical_url": "/centralgatech/courses/metr-2211", "markdown_url": "/centralgatech/courses/metr-2211.md" }, { "id": "centralgatech-000119", "code": "METR 1163", "title": "Dimensional Metrology 4", "credits": null, "hours": null, "description": "Total Hours 22 ELECTRONIC METROLOGY TECHNICIAN (EM91) Technical Certificate of Credit Provides an introduction to many devices and circuits commonly used in instrumentation. Topics include voltage, standard resistors, capacitors, frequency and frequency conductors, and spectrum analysis. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 17 Location(s) Offered: Macon | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001072", "centralgatech-001073", "centralgatech-001074" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1163", "canonical_url": "/centralgatech/courses/metr-1163", "markdown_url": "/centralgatech/courses/metr-1163.md" }, { "id": "centralgatech-000120", "code": "METR 2111", "title": "Electronic Measuring Instruments 4", "credits": null, "hours": null, "description": "Total Hours 22 ACADEMIC PROGRAMS PLUMBING RESIDENTIAL/COMMERCIAL PLUMBING TECHNICIAN (RP11) Technical Certificate of Credit Offers students basic skills in plumbing technology, construction, maintenance, and repair. Students completing the certificate program are prepared for entry-level employment as a residential plumber. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001072", "centralgatech-001073", "centralgatech-001075" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR2111", "canonical_url": "/centralgatech/courses/metr-2111", "markdown_url": "/centralgatech/courses/metr-2111.md" }, { "id": "centralgatech-000121", "code": "PLBG 1280", "title": "Gas Piping, Venting, and Appliances 3", "credits": null, "hours": null, "description": "Total Hours 21 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE PRECISION MACHINING AND MANUFACTURING PRECISION MACHINING AND MANUFACTURING (MTT2) Diploma The Precision Machining and Manufacturing Diploma program is a sequence of courses that prepares students for careers in the machine tool technology field. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of machine tool theory and practical application necessary for successful employment. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1280", "canonical_url": "/centralgatech/courses/plbg-1280", "markdown_url": "/centralgatech/courses/plbg-1280.md" }, { "id": "centralgatech-000122", "code": "MCHT 1013", "title": "MACHINE TOOL MATH", "credits": null, "hours": null, "description": "This course develops mathematical competencies as applied to machine tool technology. Emphasis is placed on the use of machining formulas by incorporating algebraic, geometric, and trigonometric functions. Topics include machining algebra and geometry, applied geometry, and applied trigonometry.", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001077" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1013", "canonical_url": "/centralgatech/courses/mcht-1013", "markdown_url": "/centralgatech/courses/mcht-1013.md" }, { "id": "centralgatech-000123", "code": "MCHT 1120", "title": "Mill Operations I 4", "credits": null, "hours": null, "description": "Total Hours 22 BASIC MACHINIST (BM31) Technical Certificate of Credit Prepares students for a machine tool operator position with a machine shop or machine tool establishment. Topics include foundations of mathematics, an introduction to machine tool technology, and blueprint reading for machine tool applications. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001016", "centralgatech-001076", "centralgatech-001077", "centralgatech-001081" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1120", "canonical_url": "/centralgatech/courses/mcht-1120", "markdown_url": "/centralgatech/courses/mcht-1120.md" }, { "id": "centralgatech-000124", "code": "MCHT 1012", "title": "Print Reading for Machine Tool 3", "credits": null, "hours": null, "description": "Total Hours 10 ACADEMIC PROGRAMS CNC SPECIALIST (CS51) Technical Certificate of Credit Provides training for graduates to gain employment as CNC machine tool technicians. Topics include CNC Fundamentals, mill and lathe manual programming, CNC practical applications, and CAD/CAM programming. The program emphasizes a combination of CNC theory and practical application necessary for successful employment. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001077", "centralgatech-001078", "centralgatech-001080", "centralgatech-001081" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1012", "canonical_url": "/centralgatech/courses/mcht-1012", "markdown_url": "/centralgatech/courses/mcht-1012.md" }, { "id": "centralgatech-000125", "code": "AMCA 2190", "title": "CAD/CAM Programming 4", "credits": null, "hours": null, "description": "Total Hours 22 LATHE OPERATOR (LP11) Technical Certificate of Credit Prepares students to use lathes, lathe set up, and lathe tool grinding. Emphasis is placed on cutting threads, boring holes to precise measurements, and cutting tapers. Topics include an introduction to machine tool technology, blueprint reading for machine tool, and basic and advanced lathe operations. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins, Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001079" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AMCA2190", "canonical_url": "/centralgatech/courses/amca-2190", "markdown_url": "/centralgatech/courses/amca-2190.md" }, { "id": "centralgatech-000126", "code": "MCHT 1219", "title": "Lathe Operations II 4", "credits": null, "hours": null, "description": "Total Hours 15 MILL OPERATOR (MP11) Technical Certificate of Credit Teaches students to effectively operate milling machinery. Students become proficient in blueprint reading, general mathematical operations, and are provided the necessary knowledge and skills to obtain employment as a milling machinist. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001080" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1219", "canonical_url": "/centralgatech/courses/mcht-1219", "markdown_url": "/centralgatech/courses/mcht-1219.md" }, { "id": "centralgatech-000127", "code": "MCHT 1220", "title": "Mill Operations II 4", "credits": null, "hours": null, "description": "Total Hours 15 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE WELDING AND JOINING TECHNOLOGY WELDING AND JOINING TECHNOLOGY (WAJ2) Diploma Prepares students for careers in the welding industry. Program learning opportunities develop academic, technical, professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes welding theory and practical application necessary for successful employment. Program graduates have the qualifications of a welding and joining technician, and are prepared to take qualification tests. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Putnam | Warner Robins | Milledgeville | Dual Enrollment Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001081" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1220", "canonical_url": "/centralgatech/courses/mcht-1220", "markdown_url": "/centralgatech/courses/mcht-1220.md" }, { "id": "centralgatech-000128", "code": "WELD 1070", "title": "Overhead Shielded Metal Arc Welding 4", "credits": null, "hours": null, "description": "Total Hours 24 PIPE WELDER (PW11) Technical Certificate of Credit Provides instruction in the specialized field of pipe welding. A good understanding and skill base in essential for the completion of this program. Topics include advanced gas tungsten arc welding practices, fabrication practices, and pipe welding techniques. Conditional Program Admission: Student must be a Welding and Joining Technology diploma graduate to enroll in this program. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Putnam | Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001083", "centralgatech-001087" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1070", "canonical_url": "/centralgatech/courses/weld-1070", "markdown_url": "/centralgatech/courses/weld-1070.md" }, { "id": "centralgatech-000129", "code": "WELD 1040", "title": "Flat Shielded Metal Arc Welding 4", "credits": null, "hours": null, "description": "Total Hours 12 FLUX CORED ARC WELDER (FC61) Technical Certificate of Credit Provides instruction in flux cored arc welding practices. Topics include an introduction to the welding industry, oxyfuel cutting techniques, and flux cored arc welding practices. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam | Warner Robins | Dual Enrollment | GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001016", "centralgatech-001082", "centralgatech-001084", "centralgatech-001087" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1040", "canonical_url": "/centralgatech/courses/weld-1040", "markdown_url": "/centralgatech/courses/weld-1040.md" }, { "id": "centralgatech-000130", "code": "WELD 1153", "title": "Flux Cored Arc Welding 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Elective(s)* 3 Total Hours 15 *Student may take any welding (WELD) course or, with advisor approval, any course that the College offers to satisfy the occupationally-related elective requirement. ACADEMIC PROGRAMS GAS METAL ARC WELDER (GM31) Technical Certificate of Credit Prepares students for welding careers in the MIG process. Topics include an introduction to welding technology, oxyfuel cutting techniques, and MIG welding techniques and processes. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam | VECTR | Warner Robins | Dual Enrollment | GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1153", "canonical_url": "/centralgatech/courses/weld-1153", "markdown_url": "/centralgatech/courses/weld-1153.md" }, { "id": "centralgatech-000131", "code": "WELD 1090", "title": "Gas Metal Arc Welding 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Elective(s)* 3 *Student may take any welding (WELD) course or, with advisor approval, any course that the College offers to satisfy the occupationally-related elective requirement. Total Hours 15 GAS TUNGSTEN ARC WELDER (GTA1) Technical Certificate of Credit Provides instruction in TIG welding techniques. Topics include understanding the nature and culture of the welding industry, oxyfuel cutting techniques, and TIG welding processes. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam | VECTR | Warner Robins | GDC Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001085" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1090", "canonical_url": "/centralgatech/courses/weld-1090", "markdown_url": "/centralgatech/courses/weld-1090.md" }, { "id": "centralgatech-000132", "code": "WELD 1110", "title": "Gas Tungsten Arc Welding 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Elective(s)* 3 *Student may take any welding (WELD) course or, with advisor approval, any course that the College offers to satisfy the occupationally-related elective requirement. Total Hours 15 Master WELDER I (MW21) Technical Certificate of Credit The Master Welder I certificate is designed to prepare students for careers in the welding industry. Program learning opportunities develop technical, professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes welding theory and practical application necessary for successful employment. Program graduates receive a Master Welder I TCC and have the qualifications of an Advanced Shielded Metal Arc Welder and are prepared to take qualification tests. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001086" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1110", "canonical_url": "/centralgatech/courses/weld-1110", "markdown_url": "/centralgatech/courses/weld-1110.md" }, { "id": "centralgatech-000133", "code": "WELD 1152", "title": "Pipe Welding 4", "credits": null, "hours": null, "description": "Total Hours 10 VERTICAL SHIELDED METAL ARC WELDING FABRICATOR (VSM1) Technical Certificate of Credit Prepares students for careers in shielded metal arc welding fabrication. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam | VECTR | Warner Robins Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001088" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1152", "canonical_url": "/centralgatech/courses/weld-1152", "markdown_url": "/centralgatech/courses/weld-1152.md" }, { "id": "centralgatech-000134", "code": "WELD 1060", "title": "Vertical Shielded Metal Arc Welding 4", "credits": null, "hours": null, "description": "XXXX xxxx Occupationally-Related Elective(s)* 3 *Student may take any welding (WELD) course or, with advisor approval, any course that the College offers to satisfy the occupationally-related elective requirement. Total Hours 11 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Business and Computer Technologies AAS - Applied Technical Management Accounting Banking and Finance Business Healthcare Technology Business Management Business Technology Computer Programming Computer Support Specialist Cybersecurity Design and Media Production Information Technology Professional Logistics Management Marketing Management Networking Specialist Sports and Fitness Management Website Design/Development Information Technology Technical Certificates of Credit ACADEMIC PROGRAMS AAS - APPLIED TECHNICAL MANAGEMENT AAS-APPLIED TECHNICAL MANAGEMENT (AS33) Associate Degree Allows a student who has completed a diploma in a TCSG program area to continue to this AAS. In addition to the skills and knowledge obtained in the diploma, the student will obtain degree-level general education knowledge and business related skills and knowledge. Conditional Program Admission: Student must have graduated or be eligible to graduate from a diploma in a TCSG program area and obtain advisor approval to enroll in this program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001083", "centralgatech-001087", "centralgatech-001089" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1060", "canonical_url": "/centralgatech/courses/weld-1060", "markdown_url": "/centralgatech/courses/weld-1060.md" }, { "id": "centralgatech-000135", "code": "MGMT 1110", "title": "Employment Rules and Regulations 3", "credits": null, "hours": null, "description": "or MKTG 1130 Business Regulations and Compliance (3) or MGMT 2120 Labor Management Relations (3) Total Hours 19 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE TECHNICAL MANAGEMENT SPECIALIST (TMS1) Technical Certificate of Credit Builds upon a student’s previously achieved degree, diploma, or technical certificate and add the management component to their education. Learning opportunities will introduce, develop and reinforce students’ knowledge, skills and attitudes required to work in the student’s current area of expertise. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001090", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001108", "centralgatech-001110", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1110", "canonical_url": "/centralgatech/courses/mgmt-1110", "markdown_url": "/centralgatech/courses/mgmt-1110.md" }, { "id": "centralgatech-000136", "code": "ACCT 1100", "title": "Financial Accounting I 4", "credits": null, "hours": null, "description": "Total Hours 68 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ACCOUNTING ACCOUNTING (AC13) Associate Degree Prepares students for a variety of accounting careers in today’s technology-driven workplaces. Learning opportunities develop academic, technical, and professional knowledge and skills for job acquisition, retention, and advancement. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001044", "centralgatech-001063", "centralgatech-001090", "centralgatech-001091", "centralgatech-001092", "centralgatech-001094", "centralgatech-001095", "centralgatech-001096", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001101", "centralgatech-001106", "centralgatech-001110", "centralgatech-001111", "centralgatech-001112", "centralgatech-001117", "centralgatech-001137", "centralgatech-001138", "centralgatech-001142", "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1100", "canonical_url": "/centralgatech/courses/acct-1100", "markdown_url": "/centralgatech/courses/acct-1100.md" }, { "id": "centralgatech-000137", "code": "ACCT 1130", "title": "| PAYROLL ACCOUNTING", "credits": null, "hours": null, "description": "Provides an understanding of the laws that affect a company’s payroll structure and practical application skills in maintaining payroll records. Topics include: payroll tax laws, payroll tax forms, payroll and personnel records, computing wages and salaries, taxes affecting employees and employers, and analyzing and journalizing payroll transactions. Prerequisite: ACCT 1100", "prerequisites": [ "ACCT 1100" ], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001093", "centralgatech-001096", "centralgatech-001097", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1130", "canonical_url": "/centralgatech/courses/acct-1130", "markdown_url": "/centralgatech/courses/acct-1130.md" }, { "id": "centralgatech-000138", "code": "ACCT 2155", "title": "Principles of Fraud Examination 3", "credits": null, "hours": null, "description": "Total Hours 16 ACADEMIC PROGRAMS BANKING AND FINANCE BANKING AND FINANCE (BAF3) Associate Degree Prepares students for employment in a variety of positions in today’s banking, insurance, mortgage, and financial services industries. The program provides learning opportunities that assist and reinforce industry needs. The program emphasizes a combination of advanced banking and finance theory and the practical application necessary for successful employment. The program is designed for new, current, or returning students for skill and knowledge enhancement. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins | Macon | Online Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001092", "centralgatech-001094", "centralgatech-001097" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2155", "canonical_url": "/centralgatech/courses/acct-2155", "markdown_url": "/centralgatech/courses/acct-2155.md" }, { "id": "centralgatech-000139", "code": "MATH 1011", "title": "| BUSINESS MATH", "credits": null, "hours": null, "description": "Emphasizes mathematical concepts found in business situations. Topics include basic mathematical skills, mathematical skills in business related problem solving, mathematical information for documents, graphs, and mathematical problems. Prerequisite: Appropriate Arithmetic Placement Test Score", "prerequisites": [], "program_ids": [ "centralgatech-001092", "centralgatech-001099", "centralgatech-001106", "centralgatech-001131", "centralgatech-001136", "centralgatech-001138", "centralgatech-001146" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1011", "canonical_url": "/centralgatech/courses/math-1011", "markdown_url": "/centralgatech/courses/math-1011.md" }, { "id": "centralgatech-000140", "code": "ACCT 2150", "title": "Principles of Auditing 3", "credits": null, "hours": null, "description": "Total Hours 18 COMPUTERIZED ACCOUNTING SPECIALIST (CAY1) Technical Certificate of Credit Provides students with skills needed to perform a variety of accounting applications using accounting software and practical accounting procedures. Topics include: principles of accounting, computerized accounting, spreadsheet fundamentals and basic computers. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001092", "centralgatech-001093", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2150", "canonical_url": "/centralgatech/courses/acct-2150", "markdown_url": "/centralgatech/courses/acct-2150.md" }, { "id": "centralgatech-000141", "code": "ACCT 2145", "title": "| PERSONAL FINANCE", "credits": null, "hours": null, "description": "Introduces practical applications of concepts and techniques used to manage personal finance. Topics include cash management, time value of money, credit, major purchasing decisions, insurance, investments, retirement, and estate planning.", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001092", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2145", "canonical_url": "/centralgatech/courses/acct-2145", "markdown_url": "/centralgatech/courses/acct-2145.md" }, { "id": "centralgatech-000142", "code": "ECON 1101", "title": "| PRINCIPLES OF ECONOMICS", "credits": null, "hours": null, "description": "Provides a description and analysis of economic operations in contemporary society. Emphasis is placed on developing an understanding of economic concepts and policies as they apply to everyday life. Topics include basic economic principles; economic forces and indicators; capital and labor; price, competition, and monopoly; money and banking; government expenditures, federal and local; fluctuations in production, employment, and income; and United States economy in perspective Prerequisite: Regular Admission", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001098", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECON1101", "canonical_url": "/centralgatech/courses/econ-1101", "markdown_url": "/centralgatech/courses/econ-1101.md" }, { "id": "centralgatech-000143", "code": "BAFN 1115", "title": "| PERSONAL FINANCIAL PLANNING", "credits": null, "hours": null, "description": "(30-30-3) This course provides knowledge and applications in the management of personal and consumer finance. Topics include record keeping, budgeting, credit principles, investment principles, and forecasting. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001094", "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN1115", "canonical_url": "/centralgatech/courses/bafn-1115", "markdown_url": "/centralgatech/courses/bafn-1115.md" }, { "id": "centralgatech-000144", "code": "MKTG 1130", "title": "| BUSINESS REGULATIONS AND", "credits": null, "hours": null, "description": "COMPLIANCE (45-0-3) This course introduces the study of contracts and other legal issues and obligations for businesses. Topics include: creation and evolution of laws, court decision processes, legal business structures, sales contracts, commercial papers, Uniform Commercial Code, and risk-bearing devices.", "prerequisites": [], "program_ids": [ "centralgatech-001090", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001108", "centralgatech-001110", "centralgatech-001111", "centralgatech-001112", "centralgatech-001137", "centralgatech-001138", "centralgatech-001144", "centralgatech-001145", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1130", "canonical_url": "/centralgatech/courses/mktg-1130", "markdown_url": "/centralgatech/courses/mktg-1130.md" }, { "id": "centralgatech-000145", "code": "MKTG 1370", "title": "Consumer Behavior 3", "credits": null, "hours": null, "description": "Total Hours 64 BANKING AND FINANCE (BAF2) Diploma Prepares students for employment in a variety of positions in today’s banking, insurance, mortgage, and financial services industries. The program provides learning opportunities that assist and reinforce industry needs. The program emphasizes a combination of advanced banking and finance theory and the practical application necessary for successful employment. The program is designed for new, current, or returning students for skill and knowledge enhancement. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins | Macon | Online Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001099", "centralgatech-001106", "centralgatech-001111", "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1370", "canonical_url": "/centralgatech/courses/mktg-1370", "markdown_url": "/centralgatech/courses/mktg-1370.md" }, { "id": "centralgatech-000146", "code": "MKTG 1160", "title": "| PROFESSIONAL SELLING", "credits": null, "hours": null, "description": "This course introduces professional selling skills and processes. Topics include: professional selling, product/sales knowledge, customer analysis/relations, selling process, sales presentations, and ethics of selling.", "prerequisites": [], "program_ids": [ "centralgatech-001099", "centralgatech-001144", "centralgatech-001146" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1160", "canonical_url": "/centralgatech/courses/mktg-1160", "markdown_url": "/centralgatech/courses/mktg-1160.md" }, { "id": "centralgatech-000147", "code": "ALHS 1090", "title": "| MEDICAL TERMINOLOGY FOR ALLIED", "credits": null, "hours": null, "description": "HEALTH SCIENCES (30-0-2) This course introduces the elements of medical terminology. Emphasis is placed on building familiarity with medical words through knowledge of roots, prefixes, and suffixes. Topics include: origins (roots, prefixes, and suffixes), word building, abbreviations and symbols, and terminology related to the human anatomy.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001101", "centralgatech-001102", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001119", "centralgatech-001120", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1090", "canonical_url": "/centralgatech/courses/alhs-1090", "markdown_url": "/centralgatech/courses/alhs-1090.md" }, { "id": "centralgatech-000148", "code": "BUSN 2310", "title": "Anatomy and Terminology for the", "credits": null, "hours": null, "description": "Medical Administrative Assistant 3 or ALHS 1010 Introduction to Anatomy and Physiology (4) or ALHS 1011 Structure and Function of the Human Body (5) Minimum Total Hours 17 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE HEALTHCARE OFFICE ASSISTANT (HFA1) Technical Certificate of Credit The Healthcare Office Assistant certificate is designed to provide educational opportunities to individuals that will enable them to obtain the knowledge and skills necessary to secure an entry level position as a receptionist in a physician’s office, hospital, clinic, or other related area. Technical courses apply to the degree or diploma program in Business Healthcare Technology. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville Warner Robins | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001119", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2310", "canonical_url": "/centralgatech/courses/busn-2310", "markdown_url": "/centralgatech/courses/busn-2310.md" }, { "id": "centralgatech-000149", "code": "BUSN 2350", "title": "| ELECTRONIC HEALTH RECORDS", "credits": null, "hours": null, "description": "This course provides a study of the content, code sets, storage, retrieval, control, flow, retention, and maintenance of electronic health records and computerized office management. Topics include: electronic health information management, electronic data interchange, coding standards, health record and office management software, point of entry data entry, electronic coding from health records, speed ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE data entry in processing health records, analysis of records to improve patient care, confidentiality, release of information, security of electronic healthcare record, communication, technology, insurance payment, managed care, posting to accounts, appointment schedules, practice management, report generation and HIPAA security. Prerequisite: BUSN 1010 only, or BUSN 2300 or ALHS 1090 and BUSN 2310 or ALHS 1011, BUSN 1100, COMP 1000", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001102", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2350", "canonical_url": "/centralgatech/courses/busn-2350", "markdown_url": "/centralgatech/courses/busn-2350.md" }, { "id": "centralgatech-000150", "code": "BUSN 2200", "title": "| OFFICE ACCOUNTING", "credits": null, "hours": null, "description": "This course introduces fundamental concepts of the accounting cycle for a sole proprietor service business. Topics include: accounting equation, analyzing business transactions, journalizing and posting transactions, accounts receivable and accounts payable subsidiary ledgers, financial statements, cash control, and payroll concepts. Prerequisite: Program admission ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001106", "centralgatech-001112", "centralgatech-001117" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2200", "canonical_url": "/centralgatech/courses/busn-2200", "markdown_url": "/centralgatech/courses/busn-2200.md" }, { "id": "centralgatech-000151", "code": "BUSN 2375", "title": "| HEALTHCARE CODING", "credits": null, "hours": null, "description": "Introduces medical coding skills and the application of international coding standards as it applies to healthcare billing for insurance purposes. Topics include: current procedural terminology, International Classification of Diseases, code book formats, coding techniques, formats of the ICD and CPT manuals, and collections. Prerequisites: BUSN 1010 or ALHS 1090 or BUSN 2300 and", "prerequisites": [ "BUSN 1010", "ALHS 1090", "BUSN 2300" ], "program_ids": [ "centralgatech-001101", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2375", "canonical_url": "/centralgatech/courses/busn-2375", "markdown_url": "/centralgatech/courses/busn-2375.md" }, { "id": "centralgatech-000152", "code": "BUSN 2830", "title": "| HEALTHCARE DELIVERY SYSTEMS", "credits": null, "hours": null, "description": "Provides students with a comprehensive overview of healthcare delivery systems and the economic, historic, political, and ethical issues that influence the accessibility, expense, and quality of healthcare services. Introduces provider organization and structure in a healthcare setting, healthcare funding, and rules, regulations, and governing bodies that monitor and protect the usage of health care systems in the United States. Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090 or", "prerequisites": [ "BUSN 1010", "BUSN 2300", "ALHS 1090" ], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2830", "canonical_url": "/centralgatech/courses/busn-2830", "markdown_url": "/centralgatech/courses/busn-2830.md" }, { "id": "centralgatech-000153", "code": "BUSN 2850", "title": "Health Record Auditing 3", "credits": null, "hours": null, "description": "Minimum Total Hours 60 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE BUSINESS HEALTHCARE TECHNOLOGY (BHT2) Diploma Designed to prepare graduates for employment in a variety of positions in today’s technology-driven workplaces. The program emphasizes the use of software and technology. Students are also introduced to accounting fundamentals, electronic communications, internet research, electronic file management, and healthcare regulation and compliance. The program includes instruction in effective communication skills and terminology that encompasses office management and executive assistant qualification and technology innovations for the office. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville Warner Robins | Online Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2850", "canonical_url": "/centralgatech/courses/busn-2850", "markdown_url": "/centralgatech/courses/busn-2850.md" }, { "id": "centralgatech-000154", "code": "BUSN 2330", "title": "| ADVANCED MEDICAL DOCUMENT", "credits": null, "hours": null, "description": "PROCESSING/TRANSCRIPTION (15-90-4) This course continues the development of speed and accuracy in the transcription of medical reports with emphasis on a variety of medical specialization. Topics include: equipment and supplies maintenance and usage, work area management, spelling, definitions, punctuation, processing/transcription speed and accuracy, resource utilization, pronunciation, and medical transcription work ethics. Prerequisite: BUSN 2320", "prerequisites": [ "BUSN 2320" ], "program_ids": [ "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2330", "canonical_url": "/centralgatech/courses/busn-2330", "markdown_url": "/centralgatech/courses/busn-2330.md" }, { "id": "centralgatech-000155", "code": "BUSN 1010", "title": "| MEDICAL TERMINOLOGY , ANATOMY", "credits": null, "hours": null, "description": "AND DISEASES FOR BUSINESS (90-0-6) Focuses on medical terminology, anatomy, and diseases and disorders of each major human body system: Integumentary System, Skeletal System, Muscular System, Nervous System, Sensory System, Endocrine System, Cardiovascular System, Lymphatic System, Respiratory System, Digestive System, Urinary System, Reproductive Systems of the Male and Female, and Development, Heredity, and Genetics.", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1010", "canonical_url": "/centralgatech/courses/busn-1010", "markdown_url": "/centralgatech/courses/busn-1010.md" }, { "id": "centralgatech-000156", "code": "BUSN 2300", "title": "| MEDICAL TERMINOLOGY", "credits": null, "hours": null, "description": "This course introduces the basic spelling and pronunciation of medical terms and the use of these terms as they relate to anatomy treatment surgery and drugs. Topics include: word analysis, word elements, spelling, pronunciation, and semantics. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001119", "centralgatech-001120", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2300", "canonical_url": "/centralgatech/courses/busn-2300", "markdown_url": "/centralgatech/courses/busn-2300.md" }, { "id": "centralgatech-000157", "code": "HIMT 1250", "title": "Health Record Content and Structure 2", "credits": null, "hours": null, "description": "Minimum Total Hours 26 ACADEMIC PROGRAMS BUSINESS MANAGEMENT BUSINESS MANAGEMENT (MD13) Associate Degree Prepares students for entry into management and supervisory occupations in a variety of businesses and industries. Learning opportunities will introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement in management. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours General Education Core Courses 18 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIMT1250", "canonical_url": "/centralgatech/courses/himt-1250", "markdown_url": "/centralgatech/courses/himt-1250.md" }, { "id": "centralgatech-000158", "code": "MGMT 2215", "title": "TEAM PROJECT", "credits": null, "hours": null, "description": "This course utilizes team methodologies to study the field of management. It encourages students to discuss their perception of management practices which have been studied during the management program. Topics include: current issues and problems in management and supervision and state-of-the-art management and leadership techniques. Students will be put into teams, will work on team projects to demonstrate their understanding of the competencies of this course, and will do peer evaluation. Potential team projects could include authoring a management book covering the competencies, videos, websites, bulletin boards, and slide presentations amongst others. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001107" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2215", "canonical_url": "/centralgatech/courses/mgmt-2215", "markdown_url": "/centralgatech/courses/mgmt-2215.md" }, { "id": "centralgatech-000159", "code": "MGMT 2205", "title": "| SERVICE SECTOR MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course focuses on supervision in the service sector with special emphasis on team building, quality management, and developing a customer focus. The challenge of providing world-class customer service is addressed through sections on principles of service industry supervision, career development, problem solving, stress management, and conflict resolution. Topics include: principles of service industry supervision, team building, customer service operations, TQM in a service environment, business software applications, communication in the service sector, introduction to information systems, selling principles and sales management, retail management, and legal issues in the service sector.", "prerequisites": [], "program_ids": [ "centralgatech-001107", "centralgatech-001109" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2205", "canonical_url": "/centralgatech/courses/mgmt-2205", "markdown_url": "/centralgatech/courses/mgmt-2205.md" }, { "id": "centralgatech-000160", "code": "MGMT 2150", "title": "| SMALL BUSINESS MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course introduces the essentials of starting, managing, and growing a small business. Topics include: the role of the entrepreneur, pricing, advertising, financing, and layout of facilities, inventory control, staffing, purchasing, vendor selection, and relevant laws affecting small business.", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001107", "centralgatech-001110" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2150", "canonical_url": "/centralgatech/courses/mgmt-2150", "markdown_url": "/centralgatech/courses/mgmt-2150.md" }, { "id": "centralgatech-000161", "code": "MKTG 2290", "title": "Marketing Internship/Practicum 3", "credits": null, "hours": null, "description": "Total Hours 63 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE BUSINESS MANAGEMENT (MD12) Diploma Prepares students for entry into management positions in a variety of businesses and industries. Learning opportunities will introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement in management. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001111", "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2290", "canonical_url": "/centralgatech/courses/mktg-2290", "markdown_url": "/centralgatech/courses/mktg-2290.md" }, { "id": "centralgatech-000162", "code": "MGMT 2220", "title": "| MANAGEMENT AND SUPERVISION", "credits": null, "hours": null, "description": "OCCUPATION-BASED INSTRUCTION (0-135-3) Reinforcement of management, supervision, and employability principles in an actual job placement or through a practicum experience. Students are acquainted with occupational responsibilities through realistic work situations and are provided with insights into management and supervisory applications on the job. Topics include: problem solving, adaptability to the job setting, use of proper interpersonal skills, application of management and supervisory techniques, and professional development. The occupation-based instruction is implemented through the use of a practicum or internship and all of the following: written individualized training plans, written performance evaluation, and a required weekly seminar.", "prerequisites": [], "program_ids": [ "centralgatech-001107" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2220", "canonical_url": "/centralgatech/courses/mgmt-2220", "markdown_url": "/centralgatech/courses/mgmt-2220.md" }, { "id": "centralgatech-000163", "code": "MGMT 2140", "title": "| RETAIL MANAGEMENT", "credits": null, "hours": null, "description": "This course develops a working knowledge of managing a retail business from a variety of perspectives with an emphasis on store management. The emphasis is on contemporary issues in retailing, particularly the process of supervising customer service and dealing with the changing demographics of retailing. An application focus on the use of information technologies, the internet, and electronic retailing is intended to give the student hands-on experience in retail management. Topics include: strategic retail management; store, non-store, and nontraditional retailing; retail human resource management; developing a customer- focused service strategy; managing customer service; retail operations and financial management; merchandise management; buying and inventory management; global, cataloging, and electronic retail management, information technology applications in retailing.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001106", "centralgatech-001107", "centralgatech-001109", "centralgatech-001110" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2140", "canonical_url": "/centralgatech/courses/mgmt-2140", "markdown_url": "/centralgatech/courses/mgmt-2140.md" }, { "id": "centralgatech-000164", "code": "MGMT 2115", "title": "| HUMAN RESOURCE MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course is designed as an overview of the Human Resource Management (HRM) function and of the manager and supervisors role in managing the career cycle from organizational entry to exit. It acquaints the student with the authority, responsibility, functions, and problems of the human resource manager, with an emphasis on developing familiarity with the real world applications required of employers and managers who increasingly are in partnership ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE with HRM generalists and specialists in their organizations. Topics include: strategic human resource management, contemporary issues in HRM: ethics, diversity and globalization; the human resource/supervisor partnership; human resource planning and productivity; job description analysis, development, and design: recruiting, interviewing, and selecting employees; performance management and appraisal systems; employee training and development: disciplinary action and employee rights; employee compensation and benefits; labor relations and employment law; and technology applications in HRM.", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001107", "centralgatech-001111", "centralgatech-001112", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2115", "canonical_url": "/centralgatech/courses/mgmt-2115", "markdown_url": "/centralgatech/courses/mgmt-2115.md" }, { "id": "centralgatech-000165", "code": "MKTG 2300", "title": "Marketing Management 3", "credits": null, "hours": null, "description": "Total Hours 24 ACADEMIC PROGRAMS BUSINESS TECHNOLOGY BUSINESS TECHNOLOGY (BT23) Associate Degree The Business Technology program is designed to prepare graduates for employment in a variety of positions in today’s technology-driven workplaces. The program emphasizes the use of word processing, spreadsheet, presentation, and database applications software. Students are also introduced to accounting fundamentals, electronic communications, internet research, and electronic file management. The program includes instruction in effective communication skills and terminology that encompasses office management and executive assistant qualification and technology innovations for the office. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of administrative technology.. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville Warner Robins | Online Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [ "centralgatech-001111", "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2300", "canonical_url": "/centralgatech/courses/mktg-2300", "markdown_url": "/centralgatech/courses/mktg-2300.md" }, { "id": "centralgatech-000166", "code": "BUSN 2190", "title": "| BUSINESS DOCUMENT PROOFREADING", "credits": null, "hours": null, "description": "AND EDITING (30-30-3) This course emphasizes proper proofreading and editing for business documents. Topics include: applying proofreading techniques and proofreaders marks with business documents, proper content, clarity, and conciseness in business documents; and business document formatting. Prerequisite: ENGL 1010 or ENGL 1101 Co-requisite: BUSN 1440", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2190", "canonical_url": "/centralgatech/courses/busn-2190", "markdown_url": "/centralgatech/courses/busn-2190.md" }, { "id": "centralgatech-000167", "code": "BUSN 1300", "title": "| INTRODUCTION TO BUSINESS", "credits": null, "hours": null, "description": "This course introduces organization and management concepts of the business world and in the office environment. Topics include business in a global economy, starting and organizing a business enterprise, management marketing strategies, and financial management. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1300", "canonical_url": "/centralgatech/courses/busn-1300", "markdown_url": "/centralgatech/courses/busn-1300.md" }, { "id": "centralgatech-000168", "code": "MKTG 2500", "title": "Exploring Social Media 3", "credits": null, "hours": null, "description": "Total Hours 18 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE COMPUTER PROGRAMMING COMPUTER PROGRAMMING (CP23) Associate Degree The Computer Programming Associate of Applied Technology degree program consists of courses designed to provide students with an understanding of the concepts, principles, and techniques required in writing computer software. Those interested in a Computer Programming Associate of Applied Technology degree should be highly motivated individuals who are interested in becoming an Information Technology professional. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 15 Area I - English/Humanities/Fine Arts", "prerequisites": [], "program_ids": [ "centralgatech-001112", "centralgatech-001124", "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2500", "canonical_url": "/centralgatech/courses/mktg-2500", "markdown_url": "/centralgatech/courses/mktg-2500.md" }, { "id": "centralgatech-000169", "code": "BUSN 2370", "title": "Medical Office Billing/Coding/Insurance 3", "credits": null, "hours": null, "description": "Minimum Total Hours 60 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE BUSINESS TECHNOLOGY (BT12) Diploma The Business Technology program is designed to prepare graduates for employment in a variety of positions in today’s technology-driven workplaces. The program emphasizes the use of word processing, spreadsheet, presentation, and database applications software. Students are also introduced to accounting fundamentals, electronic communications, Internet research, and electronic file management. The program includes instruction in effective communication skills and terminology that encompasses office management and executive assistant qualification and technology innovations for the office. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of administrative technology. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville Warner Robins | Online Credit Hours General Education Core Courses 9", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105", "centralgatech-001119" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2370", "canonical_url": "/centralgatech/courses/busn-2370", "markdown_url": "/centralgatech/courses/busn-2370.md" }, { "id": "centralgatech-000170", "code": "BUSN 2140", "title": "Expert Word Analysis 3", "credits": null, "hours": null, "description": "Total Hours 22 ACADEMIC PROGRAMS ADMINISTRATIVE SUPPORT ASSISTANT (AS81) Technical Certificate of Credit prepares individuals to provide administrative support under the supervision of office managers, executive assistants, and other office personnel. Courses include: Introduction to computers, word processing, and office procedures. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins | Macon Milledgeville Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001112", "centralgatech-001113", "centralgatech-001122", "centralgatech-001123" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2140", "canonical_url": "/centralgatech/courses/busn-2140", "markdown_url": "/centralgatech/courses/busn-2140.md" }, { "id": "centralgatech-000171", "code": "BUSN 1460", "title": "| KEYBOARDING AND DOCUMENT", "credits": null, "hours": null, "description": "FORMATTING (15-90-4) This course introduces and reinforces the touch system of keyboarding; placing emphasis on establishing correct techniques and building speed and accuracy. In addition, this course introduces and applies document formatting skills including production of memos, email messages and letter from scratch using various styles and special features. Focus includes using correct grammar, spelling, punctuation, capitalization, number expressions, etc. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001112", "centralgatech-001114", "centralgatech-001123" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1460", "canonical_url": "/centralgatech/courses/busn-1460", "markdown_url": "/centralgatech/courses/busn-1460.md" }, { "id": "centralgatech-000172", "code": "BCST 1060", "title": "Spreadsheet Applications 4", "credits": null, "hours": null, "description": "Total Hours 11 BUSINESS AND CUSTOMER SERVICE TECHNOLOGY (BA21) Technical Certificate of Credit Introduces the student to the dynamics of providing exceptional customer service in a variety of customer service settings. The training includes an overview of the service industry, why service is important, and the demand for skilled customer service representatives. Training also includes developing skills that help the learner: project the right image and develop interpersonal skills, build rapport, problem solve, address diversity, and work collaboratively. Learners also train on the Microsoft Window Environment and learn to produce documents in Microsoft Office applications. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001115" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1060", "canonical_url": "/centralgatech/courses/bcst-1060", "markdown_url": "/centralgatech/courses/bcst-1060.md" }, { "id": "centralgatech-000173", "code": "BCST 1030", "title": "Advanced Office Management 2", "credits": null, "hours": null, "description": "Total Hours 9 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE LEGAL ADMINISTRATIVE ASSISTANT (LA11) Technical Certificate of Credit Prepares students for immediate employment as entry-level office assistants in law offices and government and corporate legal departments. The program provides students with the knowledge, skills, and attitudes necessary for success in legal offices as receptionists and as office assistants and prepares students in the areas of legal office etiquette, word processing, English grammar, and legal document preparation. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001116", "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1030", "canonical_url": "/centralgatech/courses/bcst-1030", "markdown_url": "/centralgatech/courses/bcst-1030.md" }, { "id": "centralgatech-000174", "code": "MKTG 2210", "title": "Entrepreneurship 6", "credits": null, "hours": null, "description": "Total Hours 27 ACADEMIC PROGRAMS MEDICAL BILLING CLERK (MB21) Technical Certificate of Credit Provides instruction in medical insurance and medical billing for reimbursement purposes. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001111", "centralgatech-001118", "centralgatech-001144", "centralgatech-001145" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2210", "canonical_url": "/centralgatech/courses/mktg-2210", "markdown_url": "/centralgatech/courses/mktg-2210.md" }, { "id": "centralgatech-000175", "code": "ALHS 1011", "title": "| STRUCTURE AND FUNCTION OF THE", "credits": null, "hours": null, "description": "HUMAN BODY (75-0-5) Focuses on basic normal structure and function of the human body. Topics include general plan and function of the human body, integumentary system, skeletal system, muscular system, nervous and sensory systems, endocrine system, cardiovascular system, lymphatic system, respiratory system, digestive system, urinary system, and reproductive system.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001101", "centralgatech-001102", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001119", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1011", "canonical_url": "/centralgatech/courses/alhs-1011", "markdown_url": "/centralgatech/courses/alhs-1011.md" }, { "id": "centralgatech-000176", "code": "BUSN 1400", "title": "| WORD PROCESSING APPLICATIONS", "credits": null, "hours": null, "description": "(30-60-4) This course covers the knowledge and skills required to use word processing software through course demonstrations, laboratory exercises, and projects. Minimal document keying will be necessary as students will work with existing documents to learn the functions and features of the word processing application. Topics and assignments will include: word processing concepts, customizing documents, formatting content, working with visual content, organizing content, reviewing documents, sharing and securing content. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001117", "centralgatech-001123" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1400", "canonical_url": "/centralgatech/courses/busn-1400", "markdown_url": "/centralgatech/courses/busn-1400.md" }, { "id": "centralgatech-000177", "code": "BUSN 1440", "title": "| DOCUMENT PRODUCTION", "credits": null, "hours": null, "description": "This course reinforces the touch system of keyboarding placing emphasis on correct techniques with adequate speed and accuracy and producing properly formatted business documents. Topics include: reinforcing correct keyboarding technique, building speed and accuracy, formatting business documents, language arts, proofreading, and work area management. Prerequisite: The ability to key 28 GWAM on 3-minute timings with no more than 3 errors or BUSN 1100.", "prerequisites": [], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001098", "centralgatech-001099", "centralgatech-001101", "centralgatech-001103", "centralgatech-001105", "centralgatech-001106", "centralgatech-001117", "centralgatech-001119", "centralgatech-001120", "centralgatech-001121", "centralgatech-001123" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1440", "canonical_url": "/centralgatech/courses/busn-1440", "markdown_url": "/centralgatech/courses/busn-1440.md" }, { "id": "centralgatech-000178", "code": "CIST 2921", "title": "IT Analysis, Design, and Project", "credits": null, "hours": null, "description": "Management 4 Total Hours 25 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE WEBSITE DEVELOPER (ISE1) Technical Certificate of Credit The curriculum in the Web Site Design TCC program prepares the student to create and maintain professional, high-quality web sites. Program graduates will be competent in the technical areas of web design, including web graphic design, XHTML, scripting, web application server-side languages, database driven content, web project management, internet security, and mobile applications. Various software tools will be used throughout the curriculum including Microsoft Visual Studio, Adobe Web Suite and/or open-source products, The purpose of this certificate is to provide training opportunities for persons already either already employed in the computer industry or have already been trained in a related computer area and wish to upgrade their skill with advanced courses and skills. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2921", "canonical_url": "/centralgatech/courses/cist-2921", "markdown_url": "/centralgatech/courses/cist-2921.md" }, { "id": "centralgatech-000179", "code": "CIST 2742", "title": "Beginning Python Programming 4", "credits": null, "hours": null, "description": "Total Hours 35 ACADEMIC PROGRAMS ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Biotechnology Cardiovascular Technology Dental Assisting Dental Hygiene Hemodialysis Technology Medical Assisting Medical Laboratory Technology Nursing Orthopedic Technology Paramedicine Pharmacy Technology Physical Therapist Assistant Polysomnographic Technology Radiologic Technology Surgical Technology Health Sciences Technical Certificates of Credit Health Sciences ACADEMIC PROGRAMS Competitive Selection Space for certain health science program cohorts is limited by the number of available clinical slots and/or the requirements of the program accrediting agency; therefore, a competitive selection process is employed to determine selection into these programs. Admission to CGTC and the competitive selection process are two distinct processes; students are responsible for understanding both. Acceptance into the college does not guarantee selection into the student’s desired health program. Complete information regarding the competitive selection process, including testing requirements, courses required for selection, estimated program costs, important deadlines, and more is included in the Health Science Programs Competitive Selection handbook, available online at www.centralgatech.edu/competitiveselection. COMPETITIVE SELECTION AND PROGRESSION Students interested in competing for a seat in a competitive selection program are encouraged to review trend data for the program. The average numbe", "prerequisites": [], "program_ids": [ "centralgatech-001125", "centralgatech-001135", "centralgatech-001136" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2742", "canonical_url": "/centralgatech/courses/cist-2742", "markdown_url": "/centralgatech/courses/cist-2742.md" }, { "id": "centralgatech-000180", "code": "CIST 2991", "title": "Internship I 3", "credits": null, "hours": null, "description": "Total Hours 53 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE COMPUTER SUPPORT SPECIALIST COMPUTER SUPPORT SPECIALIST (CS23) Associate Degree Computer Support Specialist associate degree program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as computer support specialist. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 15 Area I - English/Humanities/Fine Arts", "prerequisites": [], "program_ids": [ "centralgatech-001150" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2991", "canonical_url": "/centralgatech/courses/cist-2991", "markdown_url": "/centralgatech/courses/cist-2991.md" }, { "id": "centralgatech-000181", "code": "CIST 1130", "title": "Operating Systems Concepts 3", "credits": null, "hours": null, "description": "or CIST 1135 Operating Systems and Virtual-Cloud Computing (4) Total Hours 13 COMPTIA A+ CERTIFIED TECHNICIAN PREPARATION (CA71) Technical Certificate of Credit Provides computer users with the skills and knowledge necessary to take the CompTIA A+ certification exam. Earning CompTIA A+ certification shows that the individual possesses the knowledge, technical skills and customer relations skills essential for working as a successful entry-level computer service technician. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001127", "centralgatech-001128", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001152", "centralgatech-001153", "centralgatech-001156", "centralgatech-001157", "centralgatech-001158", "centralgatech-001162", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1130", "canonical_url": "/centralgatech/courses/cist-1130", "markdown_url": "/centralgatech/courses/cist-1130.md" }, { "id": "centralgatech-000182", "code": "CIST 1401", "title": "| COMPUTER NETWORKING", "credits": null, "hours": null, "description": "FUNDAMENTALS (30-60-4) Introduces networking technologies and prepares students to take the CompTIA’s broad-based, vendor independent networking certification exam, Network +. This course covers a wide range of material about networking, including local area networks, wide area networks, protocols, topologies, transmission media, and security. Focuses on operating network management systems, and implementing the installation of networks. It reviews cabling, connection schemes, the fundamentals of the LAN and WAN technologies, TCP/IP configuration and troubleshooting, remote connectivity, and network maintenance and troubleshooting. Topics include: basic knowledge of networking technology, network media and topologies, network devices, network management, network tools and network security. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001101", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001154", "centralgatech-001155", "centralgatech-001158", "centralgatech-001160", "centralgatech-001161", "centralgatech-001162", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1401", "canonical_url": "/centralgatech/courses/cist-1401", "markdown_url": "/centralgatech/courses/cist-1401.md" }, { "id": "centralgatech-000183", "code": "CIST 1220", "title": "| STRUCTURED QUERY LANGUAGE", "credits": null, "hours": null, "description": "(30-60-4) This course includes basic database design concepts and solving database retrieval and modification problems using the SQL language. Topics include: database vocabulary, relational database design, data retrieval using SQL, data modification using SQL, developing and using SQL procedures. Prerequisite: CIST 1001, CIST 1305 ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [ "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001150", "centralgatech-001151", "centralgatech-001164", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1220", "canonical_url": "/centralgatech/courses/cist-1220", "markdown_url": "/centralgatech/courses/cist-1220.md" }, { "id": "centralgatech-000184", "code": "CIST 2127", "title": "Comprehensive Word Processing", "credits": null, "hours": null, "description": "Techniques 3 Total Hours 9 NETWORK ADMINISTRATOR (NA21) Technical Certificate of Credit Provides basic training in computer information systems networking. Students are introduced to the basic concepts of network administration. Upon graduation, students will be able to install, configure and maintain networks using Windows networking software. The student is prepared to take the MCP (Microsoft Certified Professional) exam. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001127", "centralgatech-001128", "centralgatech-001167" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2127", "canonical_url": "/centralgatech/courses/cist-2127", "markdown_url": "/centralgatech/courses/cist-2127.md" }, { "id": "centralgatech-000185", "code": "CIST 2613", "title": "Ethical Hacking and Penetration Testing 4", "credits": null, "hours": null, "description": "Total Hours 66 NETWORKING SPECIALIST (NS14) Diploma Provides students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as networking specialists. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001129", "centralgatech-001155", "centralgatech-001159" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2613", "canonical_url": "/centralgatech/courses/cist-2613", "markdown_url": "/centralgatech/courses/cist-2613.md" }, { "id": "centralgatech-000186", "code": "DMPT 1055", "title": "Introduction to Media Technology 4", "credits": null, "hours": null, "description": "or CIST 1101 Working with Microsoft Windows (3) or COMP 1000 Introduction to Computer Literacy (3) Minimum Total Hours 15 MOTION GRAPHICS ASSISTANT (MG21) Technical Certificate of Credit Combines the specialist skills of pre-production, production and an emphasis on post-production. Motion graphics are graphics that use video and/or animation technology to create the illusion of motion or a transforming appearance. Students develop valuable industry standard techniques and become adept with using various software applications to integrate 2D and 3D design elements with live footage, audio and visual effects artistry. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT1055", "canonical_url": "/centralgatech/courses/dmpt-1055", "markdown_url": "/centralgatech/courses/dmpt-1055.md" }, { "id": "centralgatech-000187", "code": "DMPT 2605", "title": "| INTRODUCTION TO VIDEO", "credits": null, "hours": null, "description": "COMPOSITING AND BROADCAST ANIMATION (30-60-4) This course introduces how to create and animate motion graphics. Students will learn to create dynamic animated titles and logos, animate raster and vector image file graphics, composite and edit multi-layered special effects using footage, work with shapes and masks, work with 3D elements, apply and animate various effect filters, and analyze and compress digital video for different output specifications. Students will be exposed to compositing concepts, techniques, and terminology used in finalizing a video or animation project. Prerequisite: DMPT 1010", "prerequisites": [ "DMPT 1010" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2605", "canonical_url": "/centralgatech/courses/dmpt-2605", "markdown_url": "/centralgatech/courses/dmpt-2605.md" }, { "id": "centralgatech-000188", "code": "MKTG 1270", "title": "Visual Merchandising 3", "credits": null, "hours": null, "description": "Minimum Total Hours 31 VIDEO AND FILM EDITOR (FAV1) Technical Certificate of Credit The Video and Film Editor certificate is designed to prepare students for employment in video and film production. Students will learn the creative and technical aspects of video production and editing through classroom and hands- on projects. The technical courses apply to the diploma and degree in the Design and Media Production Technology program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Location(s) Offered: Macon Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1270", "canonical_url": "/centralgatech/courses/mktg-1270", "markdown_url": "/centralgatech/courses/mktg-1270.md" }, { "id": "centralgatech-000189", "code": "DMPT 2630", "title": "Post-Production Audio 4", "credits": null, "hours": null, "description": "Total Hours 19 ACADEMIC PROGRAMS INFORMATION TECHNOLOGY PROFESSIONAL INFORMATION TECHNOLOGY PROFESSIONAL (ITP3) Associate Degree Emphasizes specialized training in home and corporate networking; computer maintenance; operating system installation, maintenance, and troubleshooting; information security; computer programming; and website design. These skills represent the subset of knowledge expected from graduates in CGTC’s service area. Graduates are employable as an information technology specialist, help desk support specialist, network installation specialist, PC repair technician, or network administrator. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon, Warner Robins Credit Hours General Education Core Courses 15 Area I - English/Humanities/Fine Arts", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2630", "canonical_url": "/centralgatech/courses/dmpt-2630", "markdown_url": "/centralgatech/courses/dmpt-2630.md" }, { "id": "centralgatech-000190", "code": "CIST 1601", "title": "| INFORMATION SECURITY FUNDAMENTALS", "credits": null, "hours": null, "description": "(30-30-3) This course provides a broad overview of information security. It covers terminology, history, security systems development and implementation. Topics also include the legal, ethical, and professional issues in information security.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001150", "centralgatech-001151", "centralgatech-001159", "centralgatech-001160", "centralgatech-001170", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1601", "canonical_url": "/centralgatech/courses/cist-1601", "markdown_url": "/centralgatech/courses/cist-1601.md" }, { "id": "centralgatech-000191", "code": "CIST 2452", "title": "| CISCO ROUTING AND SWITCHING", "credits": null, "hours": null, "description": "ESSENTIALS(30-60-4) The goal is to develop an understanding of how a router learns about remote networks and determines the best path to those networks. Topics include basics of routing, static routing, dynamic routing, distance vector routing, distance vector routing protocols, VLSM and CIDR, routing table in- depth, link state routing, and link state routing protocols. Prerequisite: CIST 2451", "prerequisites": [ "CIST 2451" ], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001155" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2452", "canonical_url": "/centralgatech/courses/cist-2452", "markdown_url": "/centralgatech/courses/cist-2452.md" }, { "id": "centralgatech-000192", "code": "CIST 2432", "title": "| UNIX/LINUX SERVER", "credits": null, "hours": null, "description": "This course covers UNIX/Linux operating system administration skills necessary to perform administrative functions. Topics include: installing UNIX/Linux, configuring and building a custom kernel, adding and removing software packages, managing run levels, managing users and groups, implementing security permissions, introduction to shell programming, managing and fixing the file system, managing memory and swap space, managing and scheduling jobs, managing system logs, understanding the boot process, system configuration files, file backup and restore, file compression, fault tolerance, and printing. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001155" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2432", "canonical_url": "/centralgatech/courses/cist-2432", "markdown_url": "/centralgatech/courses/cist-2432.md" }, { "id": "centralgatech-000193", "code": "SCMA 1002", "title": "| PURCHASING", "credits": null, "hours": null, "description": "This course is a study of the fundamental aspects of industrial and government purchasing. Emphasis is placed on procedures, techniques, and challenges in the field of purchasing, as well as the basic organization of purchasing departments. Topics include: purchasing role in business, industrial purchasing, purchasing capital equipment, purchasing management and organization, governmental purchasing, electronic data interchange, and ordering decisions. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001142" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1002", "canonical_url": "/centralgatech/courses/scma-1002", "markdown_url": "/centralgatech/courses/scma-1002.md" }, { "id": "centralgatech-000194", "code": "SCMA 1005", "title": "| DISTRIBUTION PRINCIPLES", "credits": null, "hours": null, "description": "This course provides an opportunity to study the wholesaling function and the movement and storage of goods. Emphasis is placed on the transportation, storing, and material handling functions. Topics include: historical and contemporary wholesale distribution, inbound and outbound operations, traffic operation concepts, distribution center safety and security, purchasing, inventory, financial management, and inside/outside selling. Prerequisite: Program admission ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001140", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1005", "canonical_url": "/centralgatech/courses/scma-1005", "markdown_url": "/centralgatech/courses/scma-1005.md" }, { "id": "centralgatech-000195", "code": "SCMA 1006", "title": "| SUPPLY CHAIN MANAGEMENT", "credits": null, "hours": null, "description": "PRINCIPLES (90-0-6) This course provides an opportunity to acquire the knowledge, skills, and attitudes necessary for the successful management and handling of materials. Emphasis is placed on basic functions and organization as well as traffic management, shipping and receiving, materials identification and storage systems. Topics include motivation and incentives, measured standards, freeing bottlenecks, reducing handling times and travel distances, quality control, cube utilization, handling of materials, and traffic management.", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001142", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1006", "canonical_url": "/centralgatech/courses/scma-1006", "markdown_url": "/centralgatech/courses/scma-1006.md" }, { "id": "centralgatech-000196", "code": "SCMA 2102", "title": "| CASE STUDIES IN THE SUPPLY CHAIN", "credits": null, "hours": null, "description": "(30-0-2) This course prepares students for entry into the field of logistics management using simulation, case studies, and research. Prerequisite: SCMA 1001, SCMA 1002, SCMA 1005, SCMA", "prerequisites": [ "SCMA 1001", "SCMA 1002", "SCMA 1005" ], "program_ids": [ "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA2102", "canonical_url": "/centralgatech/courses/scma-2102", "markdown_url": "/centralgatech/courses/scma-2102.md" }, { "id": "centralgatech-000197", "code": "SCMA 2106", "title": "Key Issues in the Global Integrated", "credits": null, "hours": null, "description": "Supply Chain 3 Total Hours 18 WAREHOUSE AND DISTRIBUTION TECHNICIAN (WA21) Technical Certificate of Credit Prepares individuals to meet or exceed entry-level distribution and warehousing industry requirements for employees. The program will provide theory and application training in essential knowledge, skills, abilities, and attitudes to successfully perform in warehousing and distribution positions. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA2106", "canonical_url": "/centralgatech/courses/scma-2106", "markdown_url": "/centralgatech/courses/scma-2106.md" }, { "id": "centralgatech-000198", "code": "CWDS 1620", "title": "Representative Warehouse Skills 1", "credits": null, "hours": null, "description": "Total Hours 9 INVENTORY CONTROL TECHNICIAN (IC41) Technical Certificate of Credit Prepares students for employment in an inventory control function for any business. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam Warner Robins | VECTR Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001139" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CWDS1620", "canonical_url": "/centralgatech/courses/cwds-1620", "markdown_url": "/centralgatech/courses/cwds-1620.md" }, { "id": "centralgatech-000199", "code": "SCMA 1051", "title": "Warehouse Operations 3", "credits": null, "hours": null, "description": "Total Hours 62 MARKETING (MM12) Diploma Prepares students for employment in a variety of positions in today’s marketing and management fields. The Marketing program provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of marketing management. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001140" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1051", "canonical_url": "/centralgatech/courses/scma-1051", "markdown_url": "/centralgatech/courses/scma-1051.md" }, { "id": "centralgatech-000200", "code": "MGMT 1100", "title": "Principles of Management 3", "credits": null, "hours": null, "description": "or MKTG 2010 Small Business Management (3) Total Hours 12 ACADEMIC PROGRAMS CALL CENTER INSURANCE MARKETING REPRESENTATIVE (CC61) Technical Certificate of Credit The Certified Insurance Marketing Representative certificate program will prepare students for careers in professional marketing positions involved in Property and Casualty Insurance and/or Life and Health Insurance. The program emphasizes development of those skills and techniques needed to function as strong, contributing, successful members of the sales and marketing team. Group and individual projects give students as opportunity to apply their knowledge and organizational skills to practical problems. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001090", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001108", "centralgatech-001109", "centralgatech-001111", "centralgatech-001112", "centralgatech-001113", "centralgatech-001137", "centralgatech-001138", "centralgatech-001141", "centralgatech-001144", "centralgatech-001145", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1100", "canonical_url": "/centralgatech/courses/mgmt-1100", "markdown_url": "/centralgatech/courses/mgmt-1100.md" }, { "id": "centralgatech-000201", "code": "MGMT 1115", "title": "Leadership", "credits": null, "hours": null, "description": "Total Hours 18 PURCHASING TECHNICIAN (PT81) Technical Certificate of Credit Prepares students for a position with a distribution center and any other business with a purchasing function. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Putnam Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001008", "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001108", "centralgatech-001141" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1115", "canonical_url": "/centralgatech/courses/mgmt-1115", "markdown_url": "/centralgatech/courses/mgmt-1115.md" }, { "id": "centralgatech-000202", "code": "SCMA 1010", "title": "Manufacturing Planning and Control / JIT 5", "credits": null, "hours": null, "description": "Total Hours 18 ACADEMIC PROGRAMS SUPPLY CHAIN SPECIALIST (SCS1) Technical Certificate of Credit The Supply Chain Specialist certificate program provides foundational knowledge of activities associated with getting products from their point of origin to the consumer. Topics include basic fundamentals of supply chain management, including a general knowledge of current management practices in logistics management, E-Commerce (EC), global supply chains, logistics, and transportation. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001142" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1010", "canonical_url": "/centralgatech/courses/scma-1010", "markdown_url": "/centralgatech/courses/scma-1010.md" }, { "id": "centralgatech-000203", "code": "MKTG 2090", "title": "| MARKETING RESEARCH", "credits": null, "hours": null, "description": "This course conveys marketing research methodology. Topics include: role of marketing research, marketing research process, ethics in marketing research, research design, collection data analysis, reporting, application of marketing research, and marketing research career paths. Prerequisite: MKTG 1100", "prerequisites": [ "MKTG 1100" ], "program_ids": [ "centralgatech-001106", "centralgatech-001111", "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2090", "canonical_url": "/centralgatech/courses/mktg-2090", "markdown_url": "/centralgatech/courses/mktg-2090.md" }, { "id": "centralgatech-000204", "code": "BUSN 1430", "title": "| DESKTOP PUBLISHING AND", "credits": null, "hours": null, "description": "PRESENTATION APPLICATIONS (30-60-4) This course covers the knowledge and skills required to use desktop publishing (DTP) software and presentation software to create business publications and presentations. Course work will include course demonstrations, laboratory exercises, and projects. Topics include: desktop publishing concepts, basic graphic design, publication layout, presentation design, and practical applications. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1430", "canonical_url": "/centralgatech/courses/busn-1430", "markdown_url": "/centralgatech/courses/busn-1430.md" }, { "id": "centralgatech-000205", "code": "MKTG 2060", "title": "| MARKETING CHANNELS", "credits": null, "hours": null, "description": "This course emphasizes the design and management of marketing channels. Topics include: role of marketing channels, channel design and planning, supply chain management, logistics, and managing marketing channels.", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001111", "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2060", "canonical_url": "/centralgatech/courses/mktg-2060", "markdown_url": "/centralgatech/courses/mktg-2060.md" }, { "id": "centralgatech-000206", "code": "MKTG 1210", "title": "| SERVICES MARKETING", "credits": null, "hours": null, "description": "This course introduces the marketing skills required in a service business. Topics include: foundation of services marketing, managing service delivery/encounters, services marketing strategy, and aligning strategy service design, and standards.", "prerequisites": [], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1210", "canonical_url": "/centralgatech/courses/mktg-1210", "markdown_url": "/centralgatech/courses/mktg-1210.md" }, { "id": "centralgatech-000207", "code": "BUSN 2170", "title": "| WEB PAGE DESIGN", "credits": null, "hours": null, "description": "This course provides instruction in the concepts necessary for individuals to create and manage professional quality websites. Topics include: website creation, web page development and design, hyper link creation, test and repair, integration, website navigation, and website management. Prerequisite: Program admission, COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2170", "canonical_url": "/centralgatech/courses/busn-2170", "markdown_url": "/centralgatech/courses/busn-2170.md" }, { "id": "centralgatech-000208", "code": "MKTG 2270", "title": "| RETAIL OPERATIONS MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course emphasizes the planning, staffing, leading, organizing, and controlling management functions in a retail operation. Topics include: the retailing environment, retailing strategy, supply chain management, financial planning, financial strategies, employee relations, and career paths in retailing. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2270", "canonical_url": "/centralgatech/courses/mktg-2270", "markdown_url": "/centralgatech/courses/mktg-2270.md" }, { "id": "centralgatech-000209", "code": "MKTG 2160", "title": "| ADVANCED SELLING", "credits": null, "hours": null, "description": "This course emphasizes advanced sales presentation skills needed in professional selling. Topics include: managing effective customer relationships, self-management, sales force training, sales force development, and career paths in professional selling. Prerequisite: MKTG 1160", "prerequisites": [ "MKTG 1160" ], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2160", "canonical_url": "/centralgatech/courses/mktg-2160", "markdown_url": "/centralgatech/courses/mktg-2160.md" }, { "id": "centralgatech-000210", "code": "MKTG 2280", "title": "| SPORTS MANAGEMENT", "credits": null, "hours": null, "description": "This course emphasizes leadership and management in the sports marketing industry. Topics include: leadership, budgeting, project management, event management, contract negotiation, and international sports marketing. Prerequisite: MKTG 1280", "prerequisites": [ "MKTG 1280" ], "program_ids": [ "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2280", "canonical_url": "/centralgatech/courses/mktg-2280", "markdown_url": "/centralgatech/courses/mktg-2280.md" }, { "id": "centralgatech-000211", "code": "MKTG 2000", "title": "| GLOBAL MARKETING", "credits": null, "hours": null, "description": "This course introduces opportunities and international strategies employed in the global marketplace. Topics include: the environment of international marketing, analyze international marketing opportunities, international market entries, design an international marketing strategy, and career paths in international marketing. Prerequisite: MKTG 1100", "prerequisites": [ "MKTG 1100" ], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2000", "canonical_url": "/centralgatech/courses/mktg-2000", "markdown_url": "/centralgatech/courses/mktg-2000.md" }, { "id": "centralgatech-000212", "code": "MKTG 2030", "title": "| DIGITAL PUBLISHING AND DESIGN", "credits": null, "hours": null, "description": "(15-60-3) This Marketing course covers the knowledge and skills required to use design and digital publishing software as well as design and create business publications, collaterals, and digital presences. Course work will include course demonstrations, laboratory exercises and projects. Topics include: digital publishing concepts, basic graphic design, publication layout, web page design, and practical digital applications. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2030", "canonical_url": "/centralgatech/courses/mktg-2030", "markdown_url": "/centralgatech/courses/mktg-2030.md" }, { "id": "centralgatech-000213", "code": "MKTG 1169", "title": "Fundamentals of Life and Health Insurance 3", "credits": null, "hours": null, "description": "or MKTG 1171 Fundamentals of Property and Casualty Insurance (3) Total Hours 17 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE NETWORKING SPECIALIST NETWORKING SPECIALIST (NS13) Associate Degree Provides students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as networking specialists. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 15 Area I - English/Humanities/Fine Arts", "prerequisites": [], "program_ids": [ "centralgatech-001146" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1169", "canonical_url": "/centralgatech/courses/mktg-1169", "markdown_url": "/centralgatech/courses/mktg-1169.md" }, { "id": "centralgatech-000214", "code": "CIST 2453", "title": "| CISCO SCALING NETWORKS", "credits": null, "hours": null, "description": "The goal is to develop an understanding of how switches are interconnected and configured to provide network access to LAN users. This course also teaches how to integrate wireless devices into a LAN. Topics include LAN design, basic switch concepts and configuration, VLAN concepts and configuration, VTP concepts and configuration, STP concepts and configuration, Inter-VLAN routing, and basic wireless concepts and configuration. Prerequisite: CIST 2452", "prerequisites": [ "CIST 2452" ], "program_ids": [ "centralgatech-001155" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2453", "canonical_url": "/centralgatech/courses/cist-2453", "markdown_url": "/centralgatech/courses/cist-2453.md" }, { "id": "centralgatech-000215", "code": "CIST 2482", "title": "| AWS CLOUD DEVELOPING", "credits": null, "hours": null, "description": "AWS Cloud Developing is designed to help students gain technical expertise in development using cloud technologies and prepare them to take the AWS Certified Developer Associate level AWS Certification exam. Prerequisites: CIST 2480", "prerequisites": [ "CIST 2480" ], "program_ids": [ "centralgatech-001154" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2482", "canonical_url": "/centralgatech/courses/cist-2482", "markdown_url": "/centralgatech/courses/cist-2482.md" }, { "id": "centralgatech-000216", "code": "CIST 2434", "title": "| UNIX/LINUX SCRIPTING", "credits": null, "hours": null, "description": "Course covers UNIX/Linux shell programming techniques necessary for UNIX/Linux System Administrators to understand and create shell script programs in a UNIX/Linux environment. Topics include: shell variables, running shell script program, conditional processing, looping structures, arithmetic operators, logical operators such as AND, OR, and NOT, positional parameters and process variables, redirection, piping and standard error, use of backslash, quotes and back quotes. Prerequisite: CIST 2431", "prerequisites": [ "CIST 2431" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2434", "canonical_url": "/centralgatech/courses/cist-2434", "markdown_url": "/centralgatech/courses/cist-2434.md" }, { "id": "centralgatech-000217", "code": "RELM 2050", "title": "| SPORTS AND FITNESS MANAGEMENT", "credits": null, "hours": null, "description": "INTERNSHIP (0-90-2) This course will provide the student with practical experience under the supervision of a professional recreation agency. The experience will allow the student to test the practical application of theories of sports and fitness management under the guidance and supervision of a recreational agency professional. Associate of Science in Nursing", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2050", "canonical_url": "/centralgatech/courses/relm-2050", "markdown_url": "/centralgatech/courses/relm-2050.md" }, { "id": "centralgatech-000218", "code": "RELM 2046", "title": "Volleyball 2", "credits": null, "hours": null, "description": "Minimum Total Hours 60 SPORTS AND FITNESS MANAGEMENT (RA12) Diploma Graduates of this program will qualify for careers in local parks and recreation agencies, YMCAs, community-based programs, adult and youth correctional facilities, campus recreation, military recreation and varied recreation settings. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins | Online Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2046", "canonical_url": "/centralgatech/courses/relm-2046", "markdown_url": "/centralgatech/courses/relm-2046.md" }, { "id": "centralgatech-000219", "code": "MKTG 2180", "title": "| PRINCIPLES OF SPORTS MARKETING", "credits": null, "hours": null, "description": "(45-0-3) This course applies the principles of marketing utilized in the sports industry. Topics include nature of sports marketing, role of sports marketing, marketing principles specific to sports, marketing mix to achieve goals, and electronic landscape and media in sports.", "prerequisites": [], "program_ids": [ "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2180", "canonical_url": "/centralgatech/courses/mktg-2180", "markdown_url": "/centralgatech/courses/mktg-2180.md" }, { "id": "centralgatech-000220", "code": "CIST 2950", "title": "| WEB SYSTEMS PROJECT", "credits": null, "hours": null, "description": "This course is a capstone course providing a realistic experience for students working in a team to develop a complete web systems project. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001150" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2950", "canonical_url": "/centralgatech/courses/cist-2950", "markdown_url": "/centralgatech/courses/cist-2950.md" }, { "id": "centralgatech-000221", "code": "CIST 2550", "title": "| WEB DEVELOPMENT II", "credits": null, "hours": null, "description": "Web Development II teaches students how to manipulate data in a database using the Open Database Connectivity (ODBC) model. Students will learn to retrieve, update, and display database information with a web application. Database access may be accomplished using a web programming language (such as PHP , Microsoft VB, Microsoft C#, or Sun Java). Topics include manipulating data in a database, working with a relational database via Open Database Connectivity (ODBC), working with different database systems, developing forms and applications to interact with a database server(s), modifying data in a database, and controls and validation. Prerequisite: CIST 1220, CIST 1510, CIST 1520", "prerequisites": [ "CIST 1220", "CIST 1510", "CIST 1520" ], "program_ids": [ "centralgatech-001150", "centralgatech-001151", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2550", "canonical_url": "/centralgatech/courses/cist-2550", "markdown_url": "/centralgatech/courses/cist-2550.md" }, { "id": "centralgatech-000222", "code": "CIST 2122", "title": "A+ Preparation 3", "credits": null, "hours": null, "description": "Total Hours 10 ADVANCED COMPUTER COMPTIA A+ CERTIFIED TECHNICIAN (MO21) Technical Certificate of Credit Prepares students for the CompTIA A+ Certification exam. The certificate includes advanced level topics and study skills preparation for the CompTIA A+ Certification exam. Students completing this certificate will be prepared for entry-level positions including IT technician, PC technician, and PC support specialist. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standardg Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001150", "centralgatech-001152", "centralgatech-001153" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2122", "canonical_url": "/centralgatech/courses/cist-2122", "markdown_url": "/centralgatech/courses/cist-2122.md" }, { "id": "centralgatech-000223", "code": "CIST 2483", "title": "AWS Data Analytics 4", "credits": null, "hours": null, "description": "Total Hours 16 CISCO NETWORK SPECIALIST (CN71) Technical Certificate of Credit Teaches how to build, maintain, and troubleshoot computer networks. Students also learn how to connect these networks to other networks and the Internet. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | VECTR | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001154" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2483", "canonical_url": "/centralgatech/courses/cist-2483", "markdown_url": "/centralgatech/courses/cist-2483.md" }, { "id": "centralgatech-000224", "code": "CIST 2371", "title": "| JAVA PROGRAMMING I", "credits": null, "hours": null, "description": "This course is designed to teach the basic concepts and methods of objected-oriented design and Java programming. Use practical problems to illustrate Java application building techniques and concepts. Develop an understanding of Java vocabulary. Create an understanding of where Java fits in the application development landscape. Create an understanding of the Java Development Kit and how to develop, debug, and run Java applications using the JDK. Continue to develop student’s programming logic skills. Topics include: JAVA Language History, JAVA Variable Definitions, JAVA Control Structures, JAVA Methods, JAVA Classes, JAVA Objects, and JAVA Graphics. Prerequisite: CIST 1305", "prerequisites": [ "CIST 1305" ], "program_ids": [ "centralgatech-001063", "centralgatech-001125", "centralgatech-001135", "centralgatech-001136", "centralgatech-001150", "centralgatech-001151", "centralgatech-001161", "centralgatech-001164" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2371", "canonical_url": "/centralgatech/courses/cist-2371", "markdown_url": "/centralgatech/courses/cist-2371.md" }, { "id": "centralgatech-000225", "code": "CIST 2130", "title": "| DESKTOP SUPPORT CONCEPTS", "credits": null, "hours": null, "description": "This course is designed to give an overview to desktop support management.", "prerequisites": [], "program_ids": [ "centralgatech-001127", "centralgatech-001128", "centralgatech-001162" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2130", "canonical_url": "/centralgatech/courses/cist-2130", "markdown_url": "/centralgatech/courses/cist-2130.md" }, { "id": "centralgatech-000226", "code": "CIST 2510", "title": "Web Technologies 3", "credits": null, "hours": null, "description": "Total Hours 9 IOS APP DEVELOPMENT (IAD1) Technical Certificate of Credit The iOS App Development in Swift Technical Certificate of Credit prepares students for positions in app development for the Apple iPad, iPhone, and Apple Watch series. The program emphasizes the knowledge and skills required to design, develop, test, and document structured and object- oriented programs utilizing Swift and Xcode. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001150", "centralgatech-001151", "centralgatech-001163", "centralgatech-001170", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2510", "canonical_url": "/centralgatech/courses/cist-2510", "markdown_url": "/centralgatech/courses/cist-2510.md" }, { "id": "centralgatech-000227", "code": "CIST 2302", "title": "Application Development in Swift II 4", "credits": null, "hours": null, "description": "Total Hours 11 ACADEMIC PROGRAMS JAVA PROGRAMMER (JP11) Technical Certificate of Credit The Java Programmer certificate provides the opportunity for students and IT professionals to add Java program language skills and object-oriented programming skills to their IT knowledge base. Individuals who complete this certificate are Java Programmers. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001125" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2302", "canonical_url": "/centralgatech/courses/cist-2302", "markdown_url": "/centralgatech/courses/cist-2302.md" }, { "id": "centralgatech-000228", "code": "CIST 2372", "title": "| JAVA PROGRAMMING II", "credits": null, "hours": null, "description": "This course is an intermediate course in Java Programming. It is assumed that the student knows the Java syntax as well as basic object oriented concepts. The student will use classes and objects provided by the core Java API. They will use these classes to accomplish tasks such as Database access, File access, exception handling, running threads, using sockets to talk across a network, and remotely calling methods using RMI techniques. Prerequisite: CIST 2371", "prerequisites": [ "CIST 2371" ], "program_ids": [ "centralgatech-001125", "centralgatech-001164" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2372", "canonical_url": "/centralgatech/courses/cist-2372", "markdown_url": "/centralgatech/courses/cist-2372.md" }, { "id": "centralgatech-000229", "code": "CIST 2128", "title": "| COMPREHENSIVE SPREADSHEET", "credits": null, "hours": null, "description": "TECHNIQUES (15-60-3) This course provides students with knowledge in spreadsheet software. Spreadsheet topics include creating and manipulating data, formatting data and content, creating and modifying formulas, presenting data visually, and collaborating on and securing data.", "prerequisites": [], "program_ids": [ "centralgatech-001127", "centralgatech-001128", "centralgatech-001165" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2128", "canonical_url": "/centralgatech/courses/cist-2128", "markdown_url": "/centralgatech/courses/cist-2128.md" }, { "id": "centralgatech-000230", "code": "CIST 2414", "title": "Microsoft Server Identity Services 4", "credits": null, "hours": null, "description": "Total Hours 16 MICROSOFT WORD APPLICATION SPECIALIST (MW11) Technical Certificate of Credit Provides students with the knowledge and skills to perform intermediate Microsoft Word and prepare them to sit for the Microsoft User Certification Exam. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online | YDC | Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001166" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2414", "canonical_url": "/centralgatech/courses/cist-2414", "markdown_url": "/centralgatech/courses/cist-2414.md" }, { "id": "centralgatech-000231", "code": "CIST 1102", "title": "| KEYBOARDING", "credits": null, "hours": null, "description": "This course introduces the touch system of keyboarding placing emphasis on correct techniques. Topics include learning the alphabetic keyboard, the numeric keyboard and keypad, building speed and accuracy, and proofreading. Students attain a minimum of 20 gross words a minute (GMAW).", "prerequisites": [], "program_ids": [ "centralgatech-001167" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1102", "canonical_url": "/centralgatech/courses/cist-1102", "markdown_url": "/centralgatech/courses/cist-1102.md" }, { "id": "centralgatech-000232", "code": "CIST 2412", "title": "| MICROSOFT SERVER INSTALLATION AND", "credits": null, "hours": null, "description": "MAINTENANCE (30-60-4) Provides students with knowledge and skills necessary to install, configure, manage, support and administer Microsoft Server. Topics include server deployment, server management, monitor and maintain servers, application and data provisioning, and business continuity and high availability. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001155", "centralgatech-001166", "centralgatech-001168" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2412", "canonical_url": "/centralgatech/courses/cist-2412", "markdown_url": "/centralgatech/courses/cist-2412.md" }, { "id": "centralgatech-000233", "code": "ENGL 1105", "title": "| WORKPLACE AND TECHNICAL", "credits": null, "hours": null, "description": "COMMUNICATIONS (45-0-3) Emphasizes practical knowledge of technical communications techniques, procedures, and reporting formats used in industry and business. Topics include reference use and research, device and process description, formal technical report writing, business correspondence, and technical report presentation. Prerequisite: ENGL 1101 with a grade of C or better", "prerequisites": [ "ENGL 1101" ], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL1105", "canonical_url": "/centralgatech/courses/engl-1105", "markdown_url": "/centralgatech/courses/engl-1105.md" }, { "id": "centralgatech-000234", "code": "BIOL 1111", "title": "| BIOLOGY I", "credits": null, "hours": null, "description": "Provides an introduction to basic biological concepts with a focus on living cells. Topics include chemical principles related to cells, cell structure and function, energy and metabolism, cell division, protein synthesis, genetics, and biotechnology. Prerequisite: Regular Admission Co-requisite: BIOL 1111L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL1111", "canonical_url": "/centralgatech/courses/biol-1111", "markdown_url": "/centralgatech/courses/biol-1111.md" }, { "id": "centralgatech-000235", "code": "BIOL 2113", "title": "| ANATOMY AND PHYSIOLOGY I", "credits": null, "hours": null, "description": "Introduces the anatomy and physiology of the human body. Emphasis is placed on the development of a systemic perspective of anatomical structures and physiological processes. Topics include body organization, cell structure and functions, tissue classifications, integumentary system, skeletal system, muscular system, and nervous and sensory systems. Prerequisite: Regular Admission Co-requisite: BIOL 2113L, ENGL 1101", "prerequisites": [], "program_ids": [ "centralgatech-001101" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2113", "canonical_url": "/centralgatech/courses/biol-2113", "markdown_url": "/centralgatech/courses/biol-2113.md" }, { "id": "centralgatech-000236", "code": "BTEC 2500", "title": "Biotechnology Internship 3", "credits": null, "hours": null, "description": "Total Hours 74 BIOTECHNOLOGY LABORATORY ASSISTANT (BLA1) Technical Certificate of Credit Introduces students to the fields of biological and chemical technology to prepare for employment in research, industrial, and medical laboratory environments. The curriculum is embedded into CGTC’s existing institutionally developed Biotechnology AAS program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2500", "canonical_url": "/centralgatech/courses/btec-2500", "markdown_url": "/centralgatech/courses/btec-2500.md" }, { "id": "centralgatech-000237", "code": "BTEC 2050", "title": "Biotech Lab Methods and Techniques 5", "credits": null, "hours": null, "description": "Total Hours 23 ACADEMIC PROGRAMS CARDIOVASCULAR TECHNOLOGY CARDIOVASCULAR TECHNOLOGY (CT13) Cardiac Cath Lab Associate Degree Provides educational opportunities to individuals in didactic and clinical environments that will enable them to obtain skills, knowledge and attitudes necessary to graduate and become a successful entry-level cardiovascular invasive specialist. The cardiovascular technology profession is centered on the evaluation, diagnosis, and treatment of patients with cardiac diseases. A cardiovascular technologist performs examinations at the request or under direct supervision of a physician, is proficient in the use of analytical equipment, and provides a foundation of data from which a correct anatomic and physiologic diagnosis may be made. Selected students will be issued a copy of program specific regulations during program orientation. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: Yes Credit Hours General Education Core Courses 19 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2050", "canonical_url": "/centralgatech/courses/btec-2050", "markdown_url": "/centralgatech/courses/btec-2050.md" }, { "id": "centralgatech-000238", "code": "PHYS 1110L", "title": "| CONCEPTUAL PHYSICS LAB", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in PHYS 1110. The laboratory exercises for this course include systems of units and systems of measurement, vector algebra, Newtonian mechanics, fluids and thermodynamics, heat, light, and optics, mechanical waves, electricity and magnetism, and modern physics. Prerequisite: MATH 1101 or MATH 1103 or MATH 1111 Co-requisite: ENGL 1101, PHYS 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1110L", "canonical_url": "/centralgatech/courses/phys-1110l", "markdown_url": "/centralgatech/courses/phys-1110l.md" }, { "id": "centralgatech-000239", "code": "CAVT 1021", "title": "| CARDIAC CATHETERIZATION CLINICAL I", "credits": null, "hours": null, "description": "(0-135-3) Clinical prep will provide hands-on experience and will serve as an introduction to the competencies, rotations, and expectations of the student while in the cardiac catheterization lab in a student capacity. Topics include: ethical and legal behavior in the catheterization laboratory, environmental safety in the catheterization laboratory, clinical orientation, monitoring skills, and basic life support. The student will perform and complete various competencies to prepare for the clinical experience in each rotation. Co-requisite: CAVT 1020, CAVT 1080", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1021", "canonical_url": "/centralgatech/courses/cavt-1021", "markdown_url": "/centralgatech/courses/cavt-1021.md" }, { "id": "centralgatech-000240", "code": "CAVT 2070", "title": "| CARDIAC CATHETERIZATIION REGISTRY", "credits": null, "hours": null, "description": "REVIEW I (0-60-2) This course is an intensive review to prepare the student for the national examination. Topics include: cardiovascular anatomy and physiology, cardiovascular disease and pathophysiology hemodynamic data, diagnostic techniques and patient care assessments. Prerequisite: CAVT 1020, CAVT 1021, CAVT 2020, CAVT 2030 Certified Warehousing Distribution", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT2070", "canonical_url": "/centralgatech/courses/cavt-2070", "markdown_url": "/centralgatech/courses/cavt-2070.md" }, { "id": "centralgatech-000241", "code": "PHYS 1110", "title": "PHYS 1110L, BIOL 2113, BIOL 2113L, BIOL", "credits": null, "hours": null, "description": "2114, BIOL 2114L are prerequisite requirements. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ECHOCARDIOGRAPHY (EC23) Associate Degree Prepares students for work in the allied health field as echocardiographers. The program offers both clinical and didactic instruction. Upon completion of this program, the student is eligible to sit for a national certification examination. Academic Progress Students must pass all courses each semester with a grade of “C” or above and maintain a GPA of 2.0 or higher in order to progress to the next semester and remain on track. Those who receive a grade below a “C” on any course may remove themselves from the track progression in the program and may have to wait until the course is offered again (usually the next year) to apply to repeat the course. Admission back into the program is dependent upon space available at the time the course is offered.. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: Yes Credit Hours General Education Core Courses 19 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1110", "canonical_url": "/centralgatech/courses/phys-1110", "markdown_url": "/centralgatech/courses/phys-1110.md" }, { "id": "centralgatech-000242", "code": "ECHO 1371", "title": "| ECHOCARDIOGRAPHY CLINICAL I", "credits": null, "hours": null, "description": "A) (0-180-4) Provides hands-on experience in performing noninvasive procedures with emphasis on instrumentation and development of clinical techniques. Topics include policies and procedures, echocardiographic instrumentation, recording patient information, patient preparation, and performing echocardiographic examinations. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO1371", "canonical_url": "/centralgatech/courses/echo-1371", "markdown_url": "/centralgatech/courses/echo-1371.md" }, { "id": "centralgatech-000243", "code": "ECHO 2361", "title": "| ECHOCARDIOGRAPHY CLINICAL II", "credits": null, "hours": null, "description": "A) (0-180-4) This course provides hands-on experience in the clinical setting with an emphasis placed on the development of clinical techniques employed to obtain meaningful data. Continued participation by the student will progressively lead to the student performing diagnostic procedures with less assistance but under the supervision of an appropriately credentialed sonographer. Topics include: echocardiographic instrumentation, logging and reporting information, preparation for echocardiographic examinations, medical ethics and performing echocardiographic procedures. Students may do a brief rotation through an invasive cardiology lab, pediatric lab and/or vascular lab. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO2361", "canonical_url": "/centralgatech/courses/echo-2361", "markdown_url": "/centralgatech/courses/echo-2361.md" }, { "id": "centralgatech-000244", "code": "ECHO 2400", "title": "Comprehensive Registry Review 1", "credits": null, "hours": null, "description": "Minimum Total Hours 73 ELECTROCARDIOGRAPHY TECHNOLOGY (ET81) Technical Certificate of Credit Provides students with the workplace skills necessary to perform and evaluate 12-lead electrocardiographs and telemetry surveillance in hospitals and cardiology offices in order to assist physicians in the diagnosis and monitoring of the heart. Students will be provided an in-depth knowledge of principles, practices, standards, and techniques used in the work place. Students will be able to demonstrate skills in accordance with the policies and procedures in the following areas: basic cardiovascular anatomy and physiology, ECG techniques and recognition, and electrophysiology. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO2400", "canonical_url": "/centralgatech/courses/echo-2400", "markdown_url": "/centralgatech/courses/echo-2400.md" }, { "id": "centralgatech-000245", "code": "ALHS 1040", "title": "| INTRODUCTION TO HEALTH CARE", "credits": null, "hours": null, "description": "(30-45-3) This course introduces a grouping of fundamental principles, practices, and issues common in the health care profession. In addition to the essential skills, students explore various delivery systems and related issues. Topics include: basic life support/CPR, basic emergency care/first aid and triage, vital signs, infection control/blood and air-borne pathogens.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1040", "canonical_url": "/centralgatech/courses/alhs-1040", "markdown_url": "/centralgatech/courses/alhs-1040.md" }, { "id": "centralgatech-000246", "code": "DENA 1010", "title": "| BASIC HUMAN BIOLOGY", "credits": null, "hours": null, "description": "This course focuses on basic normal structure and function of the human body with an emphasis on organ systems. Topics include medical terminology as it relates to the normal human body; normal structure and function of the human body focusing on cells and tissues, organs and systems, and homeostatic mechanisms. Prerequisite: ENGL 1010, PSYC 1010, MATH 1012, ALHS 1040", "prerequisites": [ "ENGL 1010", "PSYC 1010", "MATH 1012", "ALHS 1040" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1010", "canonical_url": "/centralgatech/courses/dena-1010", "markdown_url": "/centralgatech/courses/dena-1010.md" }, { "id": "centralgatech-000247", "code": "DENA 1480", "title": "Dental Practicum III 5", "credits": null, "hours": null, "description": "Total Hours 50 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE DENTAL HYGIENE DENTAL HYGIENE (DH13) Associate Degree Prepares students for positions in the dental profession. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. Registered dental hygienists work in a variety of professional settings. The public is most familiar with dental hygienists in the private dental office, where they perform numerous critical services designed to detect and prevent diseases of the mouth. These include oral prophylaxis; examining the head, neck, and oral areas for signs of disease; educating patients about oral hygiene; taking or developing radiographs; and applying fluoride or sealants. In this setting, registered dental hygienists play a vital role in protecting the oral health of the American public. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon | Warner Robins Competitive Selection: Yes Credit Hours General Education Core Courses 22 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1480", "canonical_url": "/centralgatech/courses/dena-1480", "markdown_url": "/centralgatech/courses/dena-1480.md" }, { "id": "centralgatech-000248", "code": "CHEM 1211L", "title": "| CHEMISTRY LAB I", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in CHEM 1211. The laboratory exercises for this course include measurement, physical and chemical properties of matter, atomic structure, chemical bonding, nomenclature, chemical reactions, stoichiometry and gas laws. Prerequisite: MATH 1101 or MATH 1103 or MATH 1111 Co-requisite: CHEM 1211", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001067" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM1211L", "canonical_url": "/centralgatech/courses/chem-1211l", "markdown_url": "/centralgatech/courses/chem-1211l.md" }, { "id": "centralgatech-000249", "code": "DHYG 2110", "title": "| BIOCHEMISTRY AND NUTRITION", "credits": null, "hours": null, "description": "FUNDAMENTALS FOR THE DENTAL HYGIENIST (30-0-2) Provides a basic introduction to organic chemistry and biochemistry. Familiarizes students with the role of nutrition in the human body with an emphasis on the dental hygienist’s role as a nutritional educator. Topics include: molecular structure, carbohydrates, proteins, nutrition and digestion, bioenergetics, nutritional aspects, nutritional disorders, and diet assessment. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2110", "canonical_url": "/centralgatech/courses/dhyg-2110", "markdown_url": "/centralgatech/courses/dhyg-2110.md" }, { "id": "centralgatech-000250", "code": "DHYG 2200", "title": "Periodontology", "credits": null, "hours": null, "description": "Total Hours 83 ACADEMIC PROGRAMS HEMODIALYSIS TECHNOLOGY HEMODIALYSIS TECHNOLOGIST (HT12) Diploma Equips health care workers with the skills, knowledge, and attitude necessary to succeed in the field of hemodialysis. Technicians operate machines that eliminate waste and extract liquefied substances from the blood of sick people whose kidneys will no longer perform that function naturally. These professionals are also named as renal dialysis technicians and also nephrology specialists. They operate under the management of medical doctors, chiefly in hospitals and clinics. Criminal background checks and drug screens may be required based on the requirements for participation in clinical experiences. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Competitive Selection: No Credit Hours General Education Core Courses 9", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2200", "canonical_url": "/centralgatech/courses/dhyg-2200", "markdown_url": "/centralgatech/courses/dhyg-2200.md" }, { "id": "centralgatech-000251", "code": "HECT 1130", "title": "Hemodialysis Reuse/Reprocessing", "credits": null, "hours": null, "description": "Practicum 6 Total Hours 16 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MEDICAL ASSISTING MEDICAL ASSISTING (MA23) Associate Degree **EFFECTIVE 202616: PROGRAM NO LONGER OFFERED** Prepares students for employment in a variety of positions in today’s medical offices. This program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of medical assisting. Graduates of the program receive a Medical Assisting diploma/degree. Academic Progress An adverse finding on a student’s background check may keep them from participating in externship and CGTC does not guarantee the student a site. The clinical site has the right to refuse a student based on an adverse background check or drug screen. Graduates of the Medical Assisting program will be eligible to take the National Medical Assistant Certification Exam through National Center for Competency Testing. A student who has been convicted of a felony or misdemeanor may be admitted into the program but may prohibit one from taking the certification exam. For more information please visit NCCT’s webpage at www.ncctinc.com. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 17 (18 for Clini", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HECT1130", "canonical_url": "/centralgatech/courses/hect-1130", "markdown_url": "/centralgatech/courses/hect-1130.md" }, { "id": "centralgatech-000252", "code": "HECT 1120", "title": "Hemodialysis Practicum 4", "credits": null, "hours": null, "description": "Total Hours 17 HEMODIALYSIS REUSE/REPROCESSING TECHNICIAN (HRO1) Technical Certificate of Credit Embedded TCC - students must enroll in HT12 diploma Equips health care workers with the skills, knowledge, and attitude necessary to succeed in the field of hemodialysis as a reuse technician who performs reprocessing of hemodialyzers. Students may be required to successfully pass criminal background checks and drugs screen analysis before placement in clinical settings. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Embedded program Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HECT1120", "canonical_url": "/centralgatech/courses/hect-1120", "markdown_url": "/centralgatech/courses/hect-1120.md" }, { "id": "centralgatech-000253", "code": "MAST 1180", "title": "Medical Assisting Seminar 4", "credits": null, "hours": null, "description": "Total Hours 62 MEDICAL ASSISTING (MA22) Diploma Prepares students for employment in a variety of positions in today’s medical offices. This program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of medical assisting. Academic Progress An adverse finding on a student’s background check may keep them from participating in externship and CGTC does not guarantee the student a site. The clinical site has the right to refuse a student based on an adverse background check or drug screen. Graduates of the Medical Assisting program will be eligible to take the National Medical Assistant Certification Exam through National Center for Competency Testing. A student who has been convicted of a felony or misdemeanor may be admitted into the program but may prohibit one from taking the certification exam. For more information please visit NCCT’s webpage at www.ncctinc.com. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Competitive Selection: No Credit Hours General Education Core Courses 9", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1180", "canonical_url": "/centralgatech/courses/mast-1180", "markdown_url": "/centralgatech/courses/mast-1180.md" }, { "id": "centralgatech-000254", "code": "MAST 1060", "title": "Medical Office Procedures 4", "credits": null, "hours": null, "description": "Total Hours 11 MEDICAL CODING (MC41) Technical Certificate of Credit Provides a basic short-term academic credential with potential for future program credit. The curriculum provides advanced training in coding skills for persons wanting to progress in their occupations or who want to prepare for full-time or part-time employment in the medical field. This program provides basic training in anatomy and physiology, medical terminology, medical procedural coding skills, and physician’s procedural coding skills. To become certified, students can sit for a national certification exam through the American Academy of Professional Coders (AAPC) or American Health Information Management Association (AHIMA) Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Online Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1060", "canonical_url": "/centralgatech/courses/mast-1060", "markdown_url": "/centralgatech/courses/mast-1060.md" }, { "id": "centralgatech-000255", "code": "MAST 1530", "title": "Medical Procedural Coding 2", "credits": null, "hours": null, "description": "Total Hours 24 MEDICAL CODING ESSENTIALS (MC61) Technical Certificate of Credit **EFFECTIVE 202612: PROGRAM NO LONGER OFFERED** The Medical Coding Essentials certificate program provides an introduction in the medical coding field to high school students. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1530", "canonical_url": "/centralgatech/courses/mast-1530", "markdown_url": "/centralgatech/courses/mast-1530.md" }, { "id": "centralgatech-000256", "code": "MAST 1120", "title": "Human Diseases", "credits": null, "hours": null, "description": "Total Hours 10 MEDICAL SKIN CARE SPECIALIST (MS61) Technical Certificate of Credit **EFFECTIVE 202612: PROGRAM NO LONGER OFFERED** Offers medical training for students to assist in dermatology offices as well as plastic surgery offices. After completing the certificate, students will be trained to assist with minor surgery as well as advanced skin care treatments such as scar removal, microdermabrasion, and chemical peel. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Milledgeville | Online Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1120", "canonical_url": "/centralgatech/courses/mast-1120", "markdown_url": "/centralgatech/courses/mast-1120.md" }, { "id": "centralgatech-000257", "code": "MSCS 1020", "title": "Advanced Medical Skin Care Treatment 2", "credits": null, "hours": null, "description": "Total Hours 15 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MEDICAL LABORATORY TECHNOLOGY MEDICAL LABORATORY TECHNOLOGY (CLT3) Associate Degree The Medical Laboratory Technology program is an Associate of Applied Science degree program where students learn to perform medical laboratory procedures under the supervision of a qualified pathologist and/or medical laboratory scientist. Classroom training is integrated with medical experiences under the medical direction of cooperating hospitals. Graduation from this program allows students to take a national certification examination which is necessary for clinical employment. Employment in doctors’ offices and hospital laboratories requires a minimum of an associate degree in this field. The Medical Laboratory Technology program is accredited by the National Accrediting Agency for Clinical Laboratory Sciences (NAACLS) and approved by the Georgia Department of Human Resources Office of Regulatory Services Diagnostic Services Unit. [Last reaffirmed: 2018; Next review: 2027] 5600 N. River Road Suite 720 Rosemont, IL 60018-5119 Website: www.naacls.org Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Warner Robins Competitive Selection: Yes Credit Hours General Education Core Courses 20 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MSCS1020", "canonical_url": "/centralgatech/courses/mscs-1020", "markdown_url": "/centralgatech/courses/mscs-1020.md" }, { "id": "centralgatech-000258", "code": "BIOL 2117", "title": "Introductory Microbiology 3", "credits": null, "hours": null, "description": "and BIOL 2117L Introductory Microbiology Lab 1 Minimum Total Hours 16 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE ORTHOPEDIC TECHNOLOGY ORTHOPEDIC TECHNOLOGY (OT13) Associate Degree Involves a combination of didactic, laboratory, and clinical environments that prepare students to work with orthopedic surgeons to treat patients in a variety of health care settings. The program provides the skills and knowledge needed to become a competent orthopedic technologist performing the following services: applying, adjusting, and removing casts and splints, fitting and educating patients in the use of orthopedic braces and equipment; setting up, adjusting, and maintaining orthopedic traction configurations; assisting with the care of acutely injured patients; and assisting the physician in the reduction and/or manipulation of orthopedic injuries; assisting the orthopedic surgeon in an operating room setting; and performing basic office and department procedures such as vital signs and patient medical history. Graduates may be employed in hospitals, physician offices, medical clinics, and orthopedic bracing and equipment companies. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: Yes Credit Hours General Education Core Courses 18 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2117", "canonical_url": "/centralgatech/courses/biol-2117", "markdown_url": "/centralgatech/courses/biol-2117.md" }, { "id": "centralgatech-000259", "code": "MLBT 2090", "title": "| MEDICAL URINALYSIS AND PREANYALYTIC", "credits": null, "hours": null, "description": "SPECIMEN PROCESS PRACTICUM (0-135-3) This course provides students with an opportunity for in-depth application and reinforcement of principles and techniques in a medical laboratory job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follows through. Topics include: urinalysis tests, blood and specimen processing, correlation of test results to disease states, safety and quality control, and quality assurance. The clinical practicum is implemented through the use of written training plans, written performance evaluation, and coordinated supervision. Prerequisite: MLBT 1010, MLBT 1030, MLBT 1050", "prerequisites": [ "MLBT 1010", "MLBT 1030", "MLBT 1050" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2090", "canonical_url": "/centralgatech/courses/mlbt-2090", "markdown_url": "/centralgatech/courses/mlbt-2090.md" }, { "id": "centralgatech-000260", "code": "MLBT 2200", "title": "Medical Laboratory Technology", "credits": null, "hours": null, "description": "Certification Review 2 Total Hours 74 ACCELERATED PHLEBOTOMY TECHNICIAN (AP81) Technical Certificate of Credit Educates students to collect blood and process blood and body fluids. Phlebotomy technicians typically work in concert with clinical laboratory personnel and other healthcare providers in hospitals or other healthcare facilities. This accelerated program would offer a condensed curriculum that covers the fundamental knowledge and techniques of phlebotomy, infection control, and venipuncture procedures. It would also provide hands-on training through clinical rotations and simulations, allowing students to gain practical experience and develop confidence in their abilities. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Warner Robins (DAP Students Only) Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2200", "canonical_url": "/centralgatech/courses/mlbt-2200", "markdown_url": "/centralgatech/courses/mlbt-2200.md" }, { "id": "centralgatech-000261", "code": "PHLT 1055", "title": "Accelerated Phlebotomy Clinical Practice 5", "credits": null, "hours": null, "description": "Total Hours 13 ACADEMIC PROGRAMS PHLEBOTOMY TECHNICIAN (PT21) Technical Certificate of Credit Educates students to collect blood and blood and body fluids. Phlebotomy technicians typically work in concert with clinical laboratory personnel and other healthcare providers in hospitals or other healthcare facilities. Topics covered include human anatomy, anatomical terminology, venipuncture, and clinical practice. Background checks and drug screens documentation must be completed prior to taking course", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHLT1055", "canonical_url": "/centralgatech/courses/phlt-1055", "markdown_url": "/centralgatech/courses/phlt-1055.md" }, { "id": "centralgatech-000262", "code": "PHLT 1030", "title": "| INTRODUCTION TO VENIPUNCTURE", "credits": null, "hours": null, "description": "(30-30-3) This course provides an introduction to blood collecting techniques and processing specimens. Emphasis is placed on the knowledge and skills needed to collect all types of blood samples from hospitalized patients. Topics include venipuncture procedure, safety and quality assurance; isolation techniques, venipuncture problems, and definitions; lab test profiles and patient care areas; other specimen collections and specimen processing; test combinations, skin punctures and POCT; professional ethics and malpractice; and certification and licensure. Co-requisite: ALHS 1011, ALHS 1040, ALHS 1090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHLT1030", "canonical_url": "/centralgatech/courses/phlt-1030", "markdown_url": "/centralgatech/courses/phlt-1030.md" }, { "id": "centralgatech-000263", "code": "PHLT 1050", "title": "Clinical Practice 4", "credits": null, "hours": null, "description": "Total Hours 17 *Please note that ALHS 1011, ALHS 1040 and ALHS 1090 are prerequisite requirements ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE NURSING ASSOCIATE OF APPLIED SCIENCE IN ALLIED HEALTH PROFESSIONS (AFA3) Associate Degree The Associate of Applied Science Degree in Allied Health Professions (AHP) offers flexibility in tailoring the curriculum to suit the individual academic and career objectives of each student. This program entails the completion of a range between 61-64 semester credit hours, comprising 15 hours of general education requirements and 49 hours allocated to healthcare-related occupation courses. These areas of concentration encompass comprehensive healthcare programs that underscore both the theoretical foundations and practical applications crucial for successful entry into the healthcare workforce. Upon graduation, students will possess a solid foundation and relevant skills to excel in various healthcare roles. By working closely with a faculty advisor, students can strategically select courses from specific areas of concentration that align with their desired career trajectory in the healthcare field. *Students must complete the Practical Nursing certificate or the Medical Assisting diploma before applying to this program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Upon completion of Practical Nursing certificate or Medical Assisting diploma Minimum Age: 18 ", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHLT1050", "canonical_url": "/centralgatech/courses/phlt-1050", "markdown_url": "/centralgatech/courses/phlt-1050.md" }, { "id": "centralgatech-000264", "code": "MAST 1130", "title": "Medical Assisting Externship and Seminar 8", "credits": null, "hours": null, "description": "Practical Nursing Specialization (8PN3) 49", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1130", "canonical_url": "/centralgatech/courses/mast-1130", "markdown_url": "/centralgatech/courses/mast-1130.md" }, { "id": "centralgatech-000265", "code": "PNSG 1645", "title": "Practical Nursing Capstone 5", "credits": null, "hours": null, "description": "Total Hours 61 ACADEMIC PROGRAMS ASSOCIATE OF SCIENCE IN NURSING (AN43) Associate Degree Prepares students for positions in the nursing profession. The curriculum is designed to produce highly trained, technically advanced, competent and caring individuals who are prepared to practice professional nursing in a variety of healthcare settings. The purpose of the program is to provide the learner with the necessary knowledge, skills, and attitudes to practice competently and safely as a beginning nurse generalist in a variety of acute and long-term care settings. Program graduates who meet exit requirements will be eligible to apply to the Georgia Board of Nursing to write the national licensure examination (NCLEX) to become registered nurses (RNs). Note: Students seeking competitive admission into this program should first apply through the Associate of Applied Science Interdisciplinary Studies (AF53) program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Warner Robins | Milledgeville Competitive Selection: Yes Credit Hours General Education Core Courses 15 Area I – Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1645", "canonical_url": "/centralgatech/courses/pnsg-1645", "markdown_url": "/centralgatech/courses/pnsg-1645.md" }, { "id": "centralgatech-000266", "code": "PSYC 2103", "title": "Human Development 3", "credits": null, "hours": null, "description": "Program Specific Electives 9 XXXXX xxxx Program Specific Elective Student may select any 1000- and 2000-level occupational courses related to major OR degree-level general education courses not used above. Please consult with your faculty advisor and CGTC’s articulation website (www.centralgatech.edu/academics/articulation) for transfer options. Total Minimum Hours 60 ACADEMIC PROGRAMS SOCIAL WORK ASSOCIATE OF SCIENCE IN SOCIAL WORK (AD93) Associate Degree The Associate of Science in Social Work degree program provides students with a foundation for entry-level positions in human services and related career fields. The program emphasizes the skills, knowledge, values, and sensitivity to effectively serve and support individuals, groups, and communities in a variety of settings. Additionally, graduates would be eligible to articulate to select 4-year institutions without loss of credit and having met the number of credit hours necessary for a 2+2 transfer to a B.S. in Social Work. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Associate Degree Level Requirement Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 42 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC2103", "canonical_url": "/centralgatech/courses/psyc-2103", "markdown_url": "/centralgatech/courses/psyc-2103.md" }, { "id": "centralgatech-000267", "code": "BIOL 2117L", "title": "| INTRODUCTORY MICROBIOLOGY LAB", "credits": null, "hours": null, "description": "(0-45-1) Selected laboratory exercises paralleling the topics in", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2117L", "canonical_url": "/centralgatech/courses/biol-2117l", "markdown_url": "/centralgatech/courses/biol-2117l.md" }, { "id": "centralgatech-000268", "code": "RNSG 2038", "title": "Leadership 3", "credits": null, "hours": null, "description": "Total Hours 65 ASSOCIATE OF SCIENCE IN NURSING (ASN) BRIDGE (AF93) Associate Degree The Associate of Science in Nursing (ASN) Bridge program provides an alternate, accelerated track for licensed LPNs, paramedics and other licensed health professionals to earn the ASN degree. Program graduates receive an Associate of Science in Nursing (ASN) degree. Program graduates who meet exit requirements will be eligible to take the National Council Licensing Examination for Registered Nurses (NCLEX- RN). Upon successfully passing the NCLEX-RN and meeting the requirements of the Georgia Board of Nursing, graduates are granted licensure to practice nursing in the state of Georgia as Registered Nurses (RNs). Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: Yes Credit Hours General Education Core Courses 15 Area I – Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG2038", "canonical_url": "/centralgatech/courses/rnsg-2038", "markdown_url": "/centralgatech/courses/rnsg-2038.md" }, { "id": "centralgatech-000269", "code": "RNSG 2040", "title": "Capstone Seminar 2", "credits": null, "hours": null, "description": "Total Hours 62 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE GERIATRIC CARE ASSISTANT (GC11) Technical Certificate of Credit The Geriatric Care Assistant Program is designed to equip students with the skills and knowledge required to provide compassionate and competent care to elderly patients in various healthcare settings. This program focuses on the unique needs of the aging population and prepares students for a rewarding career in geriatric care. Other Admission Conditions: Students must have completed one of the NAST courses listed below and/or hold an active GA-CNA certification in good standing. - NAST 1100: Nurse Aide Fundamentals - NAST 2100: Nurse Aide Accelerated -", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG2040", "canonical_url": "/centralgatech/courses/rnsg-2040", "markdown_url": "/centralgatech/courses/rnsg-2040.md" }, { "id": "centralgatech-000270", "code": "NAST 2105", "title": "Nurse Aide Fast Track", "credits": null, "hours": null, "description": "Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: 16 Location(s) Offered: Dual Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#NAST2105", "canonical_url": "/centralgatech/courses/nast-2105", "markdown_url": "/centralgatech/courses/nast-2105.md" }, { "id": "centralgatech-000271", "code": "GERT 1030", "title": "Gerontological Nutrition 1", "credits": null, "hours": null, "description": "Minimum Total Hours 9 MILITARY MEDIC PERSONNEL TO LPN TRANSITION PROGRAM (ME91) Technical Certificate of Credit The Military Medical Personnel to Licensed Practical Nursing (LPN) Transition Program is designed to provide a structured, competency-based educational pathway for military medical personnel seeking licensure as practical nurses in Georgia. Recognizing the depth of knowledge and hands-on experience that military medics, corpsmen, and medical technicians bring to the program, in accordance with Senate Bill 449 (SB 449). This initiative is designed to provide qualified military medical personnel with a structured pathway to transition seamlessly into the role of an LPN in Georgia, leveraging their prior healthcare training and experience. Conditional Admission: Students must a Military Medical Personnel who has completed the GBON application requirements for licensure by examination and hold a provisional PN license by passing the NCLEX-PN national licensure examination within 12 months of beginning the transition program. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: VECTR Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#GERT1030", "canonical_url": "/centralgatech/courses/gert-1030", "markdown_url": "/centralgatech/courses/gert-1030.md" }, { "id": "centralgatech-000272", "code": "PNSG 1602", "title": "PN/Military Transition Clinical 4", "credits": null, "hours": null, "description": "Total Hours 14 NURSE AIDE (CN21) Technical Certificate of Credit Prepares students with classroom training and practice as well as the clinical experiences necessary to care for patients in various settings including general medical and surgical hospitals, nursing care facilities, community care facilities for the elderly, and home health care services. Students who successfully complete this program may be eligible to sit for the National Nurse Aide Assessment Program (NNAAP), which determines competency to become enrolled in the state Nurse Aide Registry. Students enrolled in this program will be required to successfully pass both criminal background checks and drug screening procedures to participate in required clinical experiences with patients in licensed facilities. Clinical sites will require liability insurance and proof of immunization status to participate in required clinical experiences. Uniforms/scrubs will be required at required clinical experience facilities. All costs for these items are the responsibility of the student and not CGTC. Specific details will be provided during class orientation to NAST 1100. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: TCSG Standard Location(s) Offered: Hawkinsville | Macon | Milledgeville Putnam | Warner Robins Dual Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1602", "canonical_url": "/centralgatech/courses/pnsg-1602", "markdown_url": "/centralgatech/courses/pnsg-1602.md" }, { "id": "centralgatech-000273", "code": "NAST 1100", "title": "Nurse Aide Fundamentals 6", "credits": null, "hours": null, "description": "Total Hours 10 PRACTICAL NURSING (PN21) Technical Certificate of Credit The Practical Nursing program is designed to prepare students to write the NCLEX-PN for licensure as practical nurses. The program prepares graduates to give competent nursing care. This is done through a selected number of occupational courses providing a variety of techniques and materials necessary to assist the student in acquiring the needed knowledge and skills to give competent care. The nursing program covers all theoretical content areas outlined in Georgia Board Rule 410-9-06(5a). A variety of clinical experiences is planned so that theory and practice are integrated under the guidance of the clinical instructor. Program graduates receive a practical nursing certificate and have the qualifications of an entry-level practical nurse. The PN21 program is a certificate program to be implemented with new cohorts of students beginning Fall 2024 and beyond. Students most commonly will have to submit a satisfactory criminal background check as well as a drug screen to be placed in a clinical health care facility to complete the clinical rotations of their educational training. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon | Milledgeville | Warner Robins Competitive Selection: Yes Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#NAST1100", "canonical_url": "/centralgatech/courses/nast-1100", "markdown_url": "/centralgatech/courses/nast-1100.md" }, { "id": "centralgatech-000274", "code": "NAST 2100", "title": "Nurse Aide Accelerated 7", "credits": null, "hours": null, "description": "Minimum Total Hours 9 ACADEMIC PROGRAMS NURSE AIDE ESSENTIALS (NAE1) Technical Certificate of Credit Prepares students with classroom training and practice as well as the clinical experiences necessary to care for patients in various settings including general medical and surgical hospitals, nursing care facilities, community care facilities for the elderly, and home health care services. Students who successfully complete this program may be eligible to sit for the National Nurse Aide Assessment Program (NNAAP). Students enrolled in this program will be required to successfully pass both criminal background checks and drug screening to participate in required clinical experiences with patients in licensed facilities. Clinical sites will require liability insurance and proof of immunization status to participate in required clinical experiences. Uniform/scrubs will be required at the clinical facilities. Students may be required to successfully pass criminal background checks and drugs screen analysis before placement in clinical settings. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#NAST2100", "canonical_url": "/centralgatech/courses/nast-2100", "markdown_url": "/centralgatech/courses/nast-2100.md" }, { "id": "centralgatech-000275", "code": "BIOL 2113L", "title": "Anatomy and Physiology Lab I 1", "credits": null, "hours": null, "description": "Select one of the following course options: (3 or 4 hours) *If you choose a science, you must also take the correspond- ing lab.", "prerequisites": [], "program_ids": [ "centralgatech-001101" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2113L", "canonical_url": "/centralgatech/courses/biol-2113l", "markdown_url": "/centralgatech/courses/biol-2113l.md" }, { "id": "centralgatech-000276", "code": "BIOL 2114", "title": "| ANATOMY AND PHYSIOLOGY II", "credits": null, "hours": null, "description": "Continues the study of the anatomy and physiology of the human body. Topics include the endocrine system, cardiovascular system, blood and lymphatic system, immune system, respiratory system, digestive system, urinary system, and reproductive system. Prerequisite: BIOL 2113, BIOL 2113L Co-requisite: BIOL 2114L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2114", "canonical_url": "/centralgatech/courses/biol-2114", "markdown_url": "/centralgatech/courses/biol-2114.md" }, { "id": "centralgatech-000277", "code": "ORTT 2030", "title": "Orthopedic Technology Capstone 3", "credits": null, "hours": null, "description": "Total Hours 69 ACCELERATED ORTHOPEDIC TECHNICIAN (AR51) Technical Certificate of Credit The Accelerated Orthopedic Technician TCC is a sequence of courses involving a combination of didactic, laboratory, and clinical environments that prepare students to work in demand, high skills in a variety of health care settings to treat patients, including orthopedic surgeon. The accelerated program provides the skills and knowledge needed to become a competent orthopedic technologist performing the following services: applying, adjusting, and removing casts and splints; fitting and educating patients in the use of orthopedic braces and equipment; setting up, adjusting, and maintaining orthopedic traction configurations; assisting with the care of acutely injured patients; assisting the physician in the reduction and/or manipulation of orthopedic injuries; assisting the orthopedic surgeon in an operating room setting; and performing basic office and departmental procedures such as vital signs and patient medical history. Graduates may become employed in hospitals, physician offices, medical clinics, and orthopedic bracing and equipment companies. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon | VECTR Center Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT2030", "canonical_url": "/centralgatech/courses/ortt-2030", "markdown_url": "/centralgatech/courses/ortt-2030.md" }, { "id": "centralgatech-000278", "code": "ORTT 2010", "title": "Orthopedic Technology Clinical I 5", "credits": null, "hours": null, "description": "Total Hours 25 ACADEMIC PROGRAMS PARAMEDICINE PARAMEDICINE (PT13) Associate Degree Prepares students to provide advanced emergency medical care for critical and emergent patients who access the emergency medical system. This individual possesses the complex knowledge and skills necessary to provide patient care and transportation. Paramedics function as part of a comprehensive EMS response, under medical oversight. Paramedics perform interventions with the basic and advanced equipment typically found on an ambulance. The paramedic is a link from the scene into the health care system. This program prepares students for employment in paramedic positions in today’s health services field and provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. This program provides opportunities to upgrade present knowledge and skills from the EMT/ EMT-I 1985/AEMT levels to a paramedic level. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians (NREMT) Paramedic certification examination and apply for Georgia licensure with the State Office of Emergency Medical Service and Trauma (SOEMST) as a paramedic. Conditions for Admission: Hold current certification and/ or licensure as an: EMT I/85 (with successful completion of Georgia State Office of Emergency Medical Services and Trauma (SOEMST) EMTI to ", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT2010", "canonical_url": "/centralgatech/courses/ortt-2010", "markdown_url": "/centralgatech/courses/ortt-2010.md" }, { "id": "centralgatech-000279", "code": "EMSP 2206", "title": "Paramedic Capstone Field Internship 3", "credits": null, "hours": null, "description": "Total Hours 67 EMS PROFESSIONS (EP12) Diploma Students who complete the EMS Professions diploma will be able to fluidly move into the paramedicine program at the diploma level. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians AEMT certification examination and to apply for Georgia licensure as an AEMT. The primary focus of an AEMT is to provide basic and limited advanced emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide patient care and transportation. AEMTs function as part of a comprehensive EMS response, under medical oversight and perform interventions with the basic and advanced equipment typically found on an ambulance. The AEMT is a link from the scene to the emergency health care system. Conditions for Admission: Completion ALHS 1011 , ALHS 1090 and MATH 1012 required prior to start of EMSP classes. Criminal background checks and drug screens may be required based on the requirements for participation in clinical experiences. To complete the AEMT portion: Submit documentation of current certification and/or licensure as an: EMT or EMT-Basic (with successful completion of Georgia State Office of Emergency Medical Services and Trauma (SOEMST) EMT-B to EMT update course); or proof of successful completion of EMSP 1210, EMSP 1211, EMSP 1221, EMSP 1230. Educat", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2206", "canonical_url": "/centralgatech/courses/emsp-2206", "markdown_url": "/centralgatech/courses/emsp-2206.md" }, { "id": "centralgatech-000280", "code": "EMSP 1580", "title": "Advanced Emergency Medical Technician", "credits": null, "hours": null, "description": "(AEMT) Capstone 1 Minimum Total Hours 42 PARAMEDICINE (PT12) Diploma The Paramedicine diploma program provides students for a dynamic and advanced role within the Emergency Medical Services (EMS) profession. This program will provide students will the complex knowledge and skills necessary to provide patient care and transportation and function as part of a comprehensive EMS response, under medical oversight as a Paramedic. This program combines rigorous academic coursework with extensive hands-on training to develop the clinical, technical and decision-making skills necessary for effective emergency response. Students will learn to assess patients, administer medications, perform advanced airway management and use life-saving equipment under the guidance of experienced instructors and medical professionals. Conditions for Admission: Hold current certification and/ or licensure as an: EMT I/85 (with successful completion of Georgia State Office of Emergency Medical Services and Trauma (SOEMST) EMTI to AEMT update course); EMT I/99; or AEMT. Completion of General Education Core and Anatomy and Physiology classes required prior to start of EMSP classes. Criminal background checks and drug screens may be required based on the requirements for participation in clinical experiences. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon Competitive Selection: ", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1580", "canonical_url": "/centralgatech/courses/emsp-1580", "markdown_url": "/centralgatech/courses/emsp-1580.md" }, { "id": "centralgatech-000281", "code": "EMSP 1160", "title": "Clinical & Practical Applications for the EMT 1", "credits": null, "hours": null, "description": "Total Hours 16 EMERGENCY MEDICAL TECHNICIAN (EMT) (EMJ1) Technical Certificate of Credit **EFFECTIVE 202614: PROGRAM NO LONGER OFFERED** Prepares students to provide basic emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual will possess the basic knowledge and skills necessary to provide patient care and transportation. Emergency Medical Technicians (EMT) function as part of a comprehensive EMS response, under medical oversight. EMTs perform interventions with the basic equipment typically found on an ambulance. The EMT is a link from the scene to the emergency health care system. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians EMT certification examination and apply for Georgia licensure as an EMT. Criminal background checks and drug screens may be required based on the requirements for participation in clinical experiences.. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Minimum Age: 18 Location(s) Offered: Macon | Warner Robins Dual Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1160", "canonical_url": "/centralgatech/courses/emsp-1160", "markdown_url": "/centralgatech/courses/emsp-1160.md" }, { "id": "centralgatech-000282", "code": "EMSP 1230", "title": "Emergency Medical Technician", "credits": null, "hours": null, "description": "Clinical 1 Total Hours 12 PREHOSPITAL EMS OPERATIONS (PEO1) Technical Certificate of Credit Combines emergency medical technician and advanced emergency medical technician programs and prepares students to provide basic and limited advanced emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide patient care and transportation. This certificate allows the graduate to function as part of a comprehensive EMS response, under medical oversight. Advanced emergency medical technicians (AEMT) perform interventions with the basic and advanced equipment typically found on an ambulance. The AEMT is a link from the scene to the emergency health care system. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians AEMT certification examination and apply for Georgia licensure as an AEMT. Criminal background checks and drug screens may be required based on the requirements for participation in clinical experiences. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Macon | Warner Robins Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1230", "canonical_url": "/centralgatech/courses/emsp-1230", "markdown_url": "/centralgatech/courses/emsp-1230.md" }, { "id": "centralgatech-000283", "code": "PHAR 1050", "title": "| PHARMACY TECHNOLOGY CLINICAL", "credits": null, "hours": null, "description": "225-5) Orients students to the clinical environment and provides experiences with the basic skills necessary for the pharmacy technician. Topics include storage and control, documentation, inventory and billing, community practice, institutional practice, and communication. PA71 Co-requisite: PHAR 1000, PHAR 1010, PHAR 1020 PT22 Co-requisite: PHAR 1000, PHAR 1020, PHAR 1040", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1050", "canonical_url": "/centralgatech/courses/phar-1050", "markdown_url": "/centralgatech/courses/phar-1050.md" }, { "id": "centralgatech-000284", "code": "PHAR 2070", "title": "Advanced Pharmacy Technology Clinical 5", "credits": null, "hours": null, "description": "Total Hours 56 PHARMACY TECHNOLOGY CERTIFICATE (PA71) Technical Certificate of Credit Provides students with short-term training to prepare them for entry-level employment in a variety of settings such as hospitals, retail pharmacies, nursing homes, medical clinics, etc. Students will receive didactic instruction and fundamental concepts and principles of receiving, storing, and dispensing medications. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Dual-Enrollment Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR2070", "canonical_url": "/centralgatech/courses/phar-2070", "markdown_url": "/centralgatech/courses/phar-2070.md" }, { "id": "centralgatech-000285", "code": "PHAR 1055", "title": "Pharmacy Assistant Clinical 5", "credits": null, "hours": null, "description": "or PHAR 1050 Pharmacy Technology Clinical (5) Total Hours 18 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE PHYSICAL THERAPIST ASSISTANT PHYSICAL THERAPIST ASSISTANT (PTA3) Associate Degree Physical therapist assistants (PTAs) are licensed health care providers who work with patients and administer physical therapy interventions under the direction and supervision of licensed physical therapists. The duties of PTAs include assisting physical therapists in implementing the plan of care and performing interventions using heat, cold, electrical stimulation, ultrasound, water, massage, therapeutic exercise, gait training, balance and coordination, and functional activities. Physical therapist assistants maintain constant communication with physical therapists regarding patient progress and response to treatment and record this information in the patients’ medical records. PTAs help patients learn or improve their ability to perform functional activities. They may also instruct patients on how to use prosthetics, braces, crutches, walkers, or wheelchairs. Currently, Georgia and other states require PTAs to gain licensure prior to obtaining employment. Upon completion of degree requirements, graduates of this program are eligible to sit for National Physical Therapy Examination (NPTE), which is required for state licensure. A criminal background check is required. Selected students will be issued a copy of program specific regulations during program orientation. The Physical T", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1055", "canonical_url": "/centralgatech/courses/phar-1055", "markdown_url": "/centralgatech/courses/phar-1055.md" }, { "id": "centralgatech-000286", "code": "PHTA 2200", "title": "Physical Therapist Assistant Seminar 1", "credits": null, "hours": null, "description": "Total Hours 76 ACADEMIC PROGRAMS POLYSOMNOGRAPHIC TECHNOLOGY POLYSOMNOGRAPHIC TECHNOLOGY (PT42) Diploma Prepares individuals to work under the supervision of a physician to provide comprehensive evaluation and treatment of sleep disorders. The program includes instruction in sleep related human anatomy and physiology, neuroanatomy and physiology of sleep, respiratory physiology, polysomnographic technology, polysomnographic record scoring with emphasis on sleep staging, respiratory, electromyographic and electrocardiographic events, positive airway pressure and oxygen treatment, sleep disorders, sleep related medical terminology, 10-20 measurement, and technologist related psychomotor skills. Graduates of this program will enter the field as a polysomnographic technologist. This program conducts a rigorous curriculum of lectures, labs, and clinical assignments. Clinical rotations are conducted on- site at a variety of hospitals and free-standing sleep disorders centers. Clinical rotations are 10-hour overnight assignments, with little to no flexibility in schedule. Therefore, holding a full-time job while in the program is not encouraged. A total of 210 clinical hours must be documented for completion of the program. However, the requirements of the program can be completed as a part-time job worker. Students are encouraged in advance to discuss with their family, the demanding schedule and overnight hours required to complete this program. Completion of this program is inten", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2200", "canonical_url": "/centralgatech/courses/phta-2200", "markdown_url": "/centralgatech/courses/phta-2200.md" }, { "id": "centralgatech-000287", "code": "PSGT 2101", "title": "Sleep Technology – Special Topics 3", "credits": null, "hours": null, "description": "Total Hours 54 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE RADIOLOGIC TECHNOLOGY ADVANCED MEDICAL IMAGING (AM13) Associate Degree Provides educational opportunities to the post-graduate registered radiologic technologist, registered radiation therapist, and registered nuclear medicine technologist, and provides the students with the knowledge needed to perform MRI and CT exams and to sit for the Post-Primary Magnetic Resonance Imaging Certification Examination and/ or the Post-Primary Computed Tomography Certification Examination. The academic component is designed to meet content specifications of the American Registry of Radiologic Technologists (ARRT) exam in Magnetic Resonance Imaging and Computed Tomography, as well as providing for continuing educational requirements. This program consists of classroom-based, web-enhanced didactic courses as well as clinical education for the student. The clinical component is required to complete competency exams needed to sit for the MRI and CT certification exams. Applicants must be a registered Radiologic Technologist, registered Radiation Therapist or registered Nuclear Medicine Technologist in good standing. Students are selected on a first come, first serve basis. New students are accepted for Fall Semester. Clinical slots are limited. Clinical education credit will be considered for prior clinical experience. After applying to CGTC, applicants must contact the CT program faculty to determine clinical credit and/or clinic", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSGT2101", "canonical_url": "/centralgatech/courses/psgt-2101", "markdown_url": "/centralgatech/courses/psgt-2101.md" }, { "id": "centralgatech-000288", "code": "RADT 2265", "title": "Computed Tomography Clinical II 4", "credits": null, "hours": null, "description": "Total Hours 21 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MAGNETIC RESONANCE IMAGING SPECIALIST (MRI1) Technical Certificate of Credit Provides educational opportunities to the post-graduate registered radiologic technologist, registered radiation therapist, registered sonographer, and registered nuclear medicine technologist in good standing. This program provides students with the knowledge needed to perform MRI exams, and to sit for the Post-Primary Magnetic Resonance Imaging certification Examination. The academic component is designed to meet competency requirements of the American Registry of Radiologic Technologists (ARRT) exam in Magnetic Resonance Imaging, as well as providing for continuing educational requirements. This Magnetic Resonance Imaging Certificate program consists of classroom-based, web-enhanced didactic courses as well as clinical education for the student. The clinical component is required to complete competency exams needed to sit for the MRI certification exam. Applicants must be a registered Radiologic Technologist, registered Radiation Therapist, registered Nuclear Medicine Technologist or registered Sonographer in good standing. Students are selected on a first come, first serve basis. Clinical slots are limited. Clinical education credit will be considered for prior clinical experience. After applying to CGTC, applicants must contact the MRI program faculty to determine clinical credit and/or clinical slot placement. In order to begin ", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2265", "canonical_url": "/centralgatech/courses/radt-2265", "markdown_url": "/centralgatech/courses/radt-2265.md" }, { "id": "centralgatech-000289", "code": "RADT 2360", "title": "Clinical Radiography IV 9", "credits": null, "hours": null, "description": "Total Hours 77 COMPUTED TOMOGRAPHY SPECIALIST (CT91) Technical Certificate of Credit Provides educational opportunities to the post-graduate registered radiologic technologist, registered radiation therapist, and registered nuclear medicine technologist in good standing. This program provides students with the knowledge needed to perform CT exams, and to sit for the Post-Primary Computed Tomography Certification Examination. The academic component is designed to meet competency requirements of the American Registry of Radiologic Technologists (ARRT) exam in Computed Tomography, as well as providing for continuing educational requirements. This Computed Tomography certificate program consists of classroom-based, web-enhanced didactic courses as well as clinical education for the student. The clinical component is required to complete competency exams needed to sit for the CT certification exam. Applicants must be a registered Radiologic Technologist, registered Radiation Therapist or registered Nuclear Medicine Technologist in good standing. Students are selected on a first come, first serve basis. Clinical slots are limited. Clinical education credit will be considered for prior clinical experience. After applying to CGTC, applicants must contact the CT program faculty to determine clinical credit and/or clinical slot placement. In order to begin the clinical requirements, students must complete a physical form, tuberculosis skin test, supply proof of immunization, undergo a ", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2360", "canonical_url": "/centralgatech/courses/radt-2360", "markdown_url": "/centralgatech/courses/radt-2360.md" }, { "id": "centralgatech-000290", "code": "MRIM 2370", "title": "MRI Review 3", "credits": null, "hours": null, "description": "Total Hours 24 ACADEMIC PROGRAMS SURGICAL TECHNOLOGY SURGICAL TECHNOLOGY (ST13) Associate Degree Prepares students for employment in a variety of positions in the surgical field. This program provides learning opportunities which introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement. In addition, the program provides opportunities to upgrade present knowledge and skills or to retrain in surgical technology. Graduates of the program receive a Surgical Technology Associate of Applied Science Degree and are qualified for employment as Surgical Technologists as well as eligible to sit for the Certified Surgical Technologist (CST) examination through the National Board of Surgical Technology and Surgical Assisting (NBSTSA). Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 18 Location(s) Offered: Warner Robins Competitive Selection: Yes Credit Hours General Education Core Courses 15 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2370", "canonical_url": "/centralgatech/courses/mrim-2370", "markdown_url": "/centralgatech/courses/mrim-2370.md" }, { "id": "centralgatech-000291", "code": "SURG 2240", "title": "Seminar in Surgical Technology 2", "credits": null, "hours": null, "description": "Total Hours 72 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE HEALTH SCIENCES TECHNICAL CERTIFICATES ANIMAL HEALTHCARE ASSISTANT (AH31) Technical Certificate of Credit The Animal Healthcare Assistant certificate program train students in the care of equine, canine, small animals and large animals. Students will have an opportunity to earn training in the care of four different types of animals. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: GDC Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2240", "canonical_url": "/centralgatech/courses/surg-2240", "markdown_url": "/centralgatech/courses/surg-2240.md" }, { "id": "centralgatech-000292", "code": "VETT 1100", "title": "Introduction to Large Animal Care 4", "credits": null, "hours": null, "description": "or VETT 1107 Introduction to Equine Care (4) or VETT 1108 Introduction to Canine Care (4) or VETT 1109 Introduction to Small Animal Care (4) Total Hours 13 HEALTH CARE ASSISTANT (HA21) Technical Certificate of Credit Provides academic foundations in communications, mathematics, and human relations, as well as technical fundamentals. Program graduates are trained in the underlying fundamentals of health care delivery and are well prepared for employment and subsequent upward mobility. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: 17 Location(s) Offered: Macon | Milledgeville | Putnam Warner Robins Competitive Selection: No Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#VETT1100", "canonical_url": "/centralgatech/courses/vett-1100", "markdown_url": "/centralgatech/courses/vett-1100.md" }, { "id": "centralgatech-000293", "code": "RELM 2010", "title": "| INTRODUCTION TO SPORTS AND FITNESS", "credits": null, "hours": null, "description": "MANAGEMENT (39-17-3) This course will provide the student with an understanding of the sociological, philosophical, economical, and historical aspects of sports and fitness. This course will also provide an introduction to sports and fitness as a profession and investigate contemporary issues in this field.", "prerequisites": [], "program_ids": [ "centralgatech-001148" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2010", "canonical_url": "/centralgatech/courses/relm-2010", "markdown_url": "/centralgatech/courses/relm-2010.md" }, { "id": "centralgatech-000294", "code": "SFMA 1220", "title": "| CERTIFIED PERSONAL TRAINING II", "credits": null, "hours": null, "description": "The course is a continuation of SFMA 1210 and will also introduce successful selling and managing of a personal trainer business as well as the legal aspects. Prerequisite: SFMA 1210 Sociology", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SFMA1220", "canonical_url": "/centralgatech/courses/sfma-1220", "markdown_url": "/centralgatech/courses/sfma-1220.md" }, { "id": "centralgatech-000295", "code": "BIOL 1112", "title": "| BIOLOGY II", "credits": null, "hours": null, "description": "Provides an introduction to basic evolutionary concepts. Also, the course emphasizes animal and plant diversity, structure and function including reproduction and development, and the dynamics of ecology as it pertains to populations, communities, ecosystems, and biosphere. Topics include principles of evolution, classification and characterizations of organisms, plant structure and function, animal structure and function, principles of ecology, and biosphere. Prerequisite: BIOL 1111, BIOL 1111L Co-requisite: BIOL 1112", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL1112", "canonical_url": "/centralgatech/courses/biol-1112", "markdown_url": "/centralgatech/courses/biol-1112.md" }, { "id": "centralgatech-000296", "code": "CHEM 1212", "title": "| CHEMISTRY II", "credits": null, "hours": null, "description": "Continues the exploration of basic chemical principles and concepts. Topics include equilibrium theory, kinetics, thermodynamics, solution chemistry, acid-base theory, and nuclear chemistry. Prerequisite: CHEM 1211, CHEM 1211L Co-requisite: CHEM 1212L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM1212", "canonical_url": "/centralgatech/courses/chem-1212", "markdown_url": "/centralgatech/courses/chem-1212.md" }, { "id": "centralgatech-000297", "code": "CHEM 2211", "title": "| ORGANIC CHEMISTRY I", "credits": null, "hours": null, "description": "This course provides instruction on the organic chemistry of alkanes, alkenes and their substitution products, reactions, nomenclature, functional groups and electron structure. Prerequisite: CHEM 1212, CHEM 1212L", "prerequisites": [ "CHEM 1212", "CHEM 1212L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM2211", "canonical_url": "/centralgatech/courses/chem-2211", "markdown_url": "/centralgatech/courses/chem-2211.md" }, { "id": "centralgatech-000298", "code": "PHYS 1112", "title": "| INTRODUCTORY PHYSICS II", "credits": null, "hours": null, "description": "The second of two algebra and trigonometry based courses in the physics sequence. Topics include material from electricity and magnetism (electric charge, electric forces and fields, electric potential energy, electric potential, capacitance, magnetism, electric current, resistance, basic electric circuits, alternating current circuits, and electromagnetic waves), geometric optics (reflection and refraction), and physical optics (interference and diffraction). Prerequisite: PHYS 1111, PHYS 1111L Co-requisite: PHYS 1112L", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1112", "canonical_url": "/centralgatech/courses/phys-1112", "markdown_url": "/centralgatech/courses/phys-1112.md" }, { "id": "centralgatech-000299", "code": "MUSC 1101", "title": "| MUSIC APPRECIATION", "credits": null, "hours": null, "description": "Explores the formal elements of musical composition, musical form and style, and the relationship of music to historical periods. The course includes listening and analysis of well- known works of music. This course encourages student interest in musical arts beyond the classroom. Prerequisite: Appropriate Degree Level Writing (English) and Reading Placement Test Scores Nurse Aide", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MUSC1101", "canonical_url": "/centralgatech/courses/musc-1101", "markdown_url": "/centralgatech/courses/musc-1101.md" }, { "id": "centralgatech-000300", "code": "RADT 1065", "title": "Radiologic Science 2", "credits": null, "hours": null, "description": "Total Hours 36 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Public Safety & Professional Services Barbering Cosmetology Criminal Justice Technology Culinary Early Childhood Care and Education Firefighter Hotel/Restaurant/Tourism Management Legal Studies Public Safety & Professional Services Technical Certificates ACADEMIC PROGRAMS BARBERING BARBER II (BI31) Technical Certificate of Credit This Barbering certificate program follows a sequence of courses which prepare students for careers in the field of barbering. The program emphasizes specialized training in safety, sanitation, hair treatments and manipulations, haircutting techniques, shaving, skin care, reception, sales, and management. The curriculum meets state licensing requirements of the Georgia State Board of Barbering. The program graduate receives a Barbering II certificate and is employable as a barber, salon/shop manager, or a salon/shop owner. Education Requirements Admission: TCSG Standard Graduation: High school diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1065", "canonical_url": "/centralgatech/courses/radt-1065", "markdown_url": "/centralgatech/courses/radt-1065.md" }, { "id": "centralgatech-000301", "code": "BARB 1110", "title": "Shop Management/Ownership 4", "credits": null, "hours": null, "description": "Total Hours 49 ACADEMIC PROGRAMS COSMETOLOGY MASTER COSMETOLOGY (CGL1) Technical Certificate of Credit Prepares students for careers in the field of cosmetology. Learning opportunities develop professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, state laws, rules, and regulations, chemistry, anatomy and physiology, skin, hair, and nail diseases and disorders, hair treatments and manipulations, hair shaping, hair styling, artificial hair, braiding/intertwining hair, chemical reformation and application, skin and nail care, hair coloring, hair lightening, reception, sales, management, employability skills, and work ethics. The curriculum meets state licensing requirements of the State Board of Cosmetology. Program graduates will receive a Cosmetology for Licensure diploma and are employable as a cosmetology salesperson, cosmetologist, salon manager, or a salon owner. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon, Milledgeville, Warner Robins GDC Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1110", "canonical_url": "/centralgatech/courses/barb-1110", "markdown_url": "/centralgatech/courses/barb-1110.md" }, { "id": "centralgatech-000302", "code": "BARB 1090", "title": "| FACIAL AND FACIAL TREATMENTS", "credits": null, "hours": null, "description": "4) Introduces the theory, procedures, and products used in the care and treatment of the skin, scalp, and hair. Provides instruction on the theory and application of techniques in the treatment of the skin, scalp, and hair; and introduces the theory and skills required in massaging the face, preparing the patron for facial treatment, and giving facial treatments for various skin conditions. Benefits of facial treatments and massage will be emphasized. Emphasis will be placed on work with live models. Topics include: treatment theory, basic corrective hair and scalp treatments, plain facial, products and supplies, disease and disorders, implements, products and supplies, diseases and disorders, corrective hair and scalp treatments, facial procedures and manipulations, and safety precautions, theory of massage, preparation of patron for massage, massage procedures, facial treatment, types of facials, and facial treatment benefits.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1090", "canonical_url": "/centralgatech/courses/barb-1090", "markdown_url": "/centralgatech/courses/barb-1090.md" }, { "id": "centralgatech-000303", "code": "BARB 1022", "title": "Shampooing 3", "credits": null, "hours": null, "description": "Total Hours 9 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE MASTER BARBER (BA31) Technical Certificate of Credit The Barbering program is a sequence of courses that prepares students for careers in the field of barbering. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, hair treatments and manipulations, haircutting techniques, shaving, skin care, reception, sales, and management. The curriculum meets state licensing requirements of the Georgia State Board of Barbering. The program graduate receives a Barbering II certificate and is employable as a barber, salon/shop manager, or a salon/shop owner. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1022", "canonical_url": "/centralgatech/courses/barb-1022", "markdown_url": "/centralgatech/courses/barb-1022.md" }, { "id": "centralgatech-000304", "code": "COSM 1125", "title": "Skin and Nail Care Practicum 2", "credits": null, "hours": null, "description": "Total Hours 44 HAIR DESIGNER (HD21) Technical Certificate of Credit Prepares students for careers in the field of hair design. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, state laws, rules, and regulations, chemistry, anatomy and physiology, hair and scalp diseases and disorders, hair treatments and manipulations, hair shaping, hair styling, artificial hair, braiding/intertwining hair, chemical reformation and application, hair coloring, hair lightening, reception, sales, management, and work ethics. The curriculum meets state licensing requirements of the State Board of Cosmetology. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Entry-level Workforce Minimum Age: 17 Location(s) Offered: Embedded program | DAP Students Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1125", "canonical_url": "/centralgatech/courses/cosm-1125", "markdown_url": "/centralgatech/courses/cosm-1125.md" }, { "id": "centralgatech-000305", "code": "COSM 1120", "title": "Salon Management 3", "credits": null, "hours": null, "description": "Total Hours 36 SALON AND SPA SUPPORT SPECIALIST (ST11) Technical Certificate of Credit Prepares students for careers in the field of cosmetology as Salon and Spa Support Specialists. Learning opportunities develop academic and professional knowledge required for job acquisition, retention, and advancement. The program emphasizes specialized training for safety, sanitation, state laws, rules and regulations, chemistry, anatomy and physiology, structure of the hair, diseases and disorders of the hair and scalp, hair and scalp analysis, basic hair and scalp treatments, basic shampooing techniques, reception sales, management, employability skills, and work ethics. Graduates are employable as a cosmetology salesperson, salon manager, or salon owner. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment | Macon YDC DAP Students Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1120", "canonical_url": "/centralgatech/courses/cosm-1120", "markdown_url": "/centralgatech/courses/cosm-1120.md" }, { "id": "centralgatech-000306", "code": "ENGL 1102", "title": "| LITERATURE AND COMPOSITION", "credits": null, "hours": null, "description": "Emphasizes the student’s ability to read literature analytically and meaningfully and to communicate clearly. Students analyze the form and content of literature in historical and philosophical contexts. Topics include reading and analysis of fiction, poetry, and drama; research; and writing about literature. Prerequisite: ENGL 1101", "prerequisites": [ "ENGL 1101" ], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL1102", "canonical_url": "/centralgatech/courses/engl-1102", "markdown_url": "/centralgatech/courses/engl-1102.md" }, { "id": "centralgatech-000307", "code": "HIST 2111", "title": "| U.S. HISTORY I", "credits": null, "hours": null, "description": "This course emphasizes the study of U. S. History to 1877 to include the post-Civil War period. The course focuses on the period from the Age of Discovery through the Civil War to include geographical, intellectual, political, economic and cultural development of the American people. It includes the history of Georgia and its constitutional development. Topics include colonization and expansion; the Revolutionary Era; the New Nation; nationalism, sectionalism, and reform; the Era of Expansion; and crisis, Civil War, and reconstruction. Prerequisite: Appropriate Degree Level English and Reading Placement Test Scores", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIST2111", "canonical_url": "/centralgatech/courses/hist-2111", "markdown_url": "/centralgatech/courses/hist-2111.md" }, { "id": "centralgatech-000308", "code": "POLS 1101", "title": "| AMERICAN GOVERNMENT", "credits": null, "hours": null, "description": "Emphasizes study of government and politics in the United States. The focus of the course will provide an overview of the Constitutional foundations of the American political processes with a focus on government institutions and political procedures. The course will examine the constitutional framework, federalism, civil liberties and civil rights, public opinion, the media, interest groups, political parties, and the election process along with the three branches of government. In addition, this course will examine the processes of Georgia state government. Topics include foundations of government, political behavior, and governing institutions. Prerequisite: Appropriate Degree Level English and Reading Placement Test Scores", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#POLS1101", "canonical_url": "/centralgatech/courses/pols-1101", "markdown_url": "/centralgatech/courses/pols-1101.md" }, { "id": "centralgatech-000309", "code": "ECON 2106", "title": "MICROECONOMICS", "credits": null, "hours": null, "description": "Provides an analysis of the ways in which consumers and business firms interact in a market economy. Topics include basic economic principles, consumer choice, behavior of profit, maximizing firms, modeling of perfect competition, monopoly, oligopoly and monopolistic competition. Prerequisite: Appropriate placement test score Education", "prerequisites": [], "program_ids": [ "centralgatech-001098" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECON2106", "canonical_url": "/centralgatech/courses/econ-2106", "markdown_url": "/centralgatech/courses/econ-2106.md" }, { "id": "centralgatech-000310", "code": "MATH 1127", "title": "| INTRODUCTION TO STATISTICS", "credits": null, "hours": null, "description": "Emphasizes the concepts and methods fundamental to utilizing and interpreting commonly used statistics. Topics include descriptive statistics, basic probability, discrete and continuous distributions, sampling distributions, hypothesis testing chi square tests, and linear regression. Prerequisite: Appropriate Algebra Placement Test Score", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001072", "centralgatech-001075", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1127", "canonical_url": "/centralgatech/courses/math-1127", "markdown_url": "/centralgatech/courses/math-1127.md" }, { "id": "centralgatech-000311", "code": "ENGL 2110", "title": "| World Literature", "credits": null, "hours": null, "description": "Explores the history of the human experience through literature and writing across the cultures of the world. Surveys of important works across multiple genres of fiction and non-fiction as a reflection of cultural values. Explores themes from the ancient through modern era. ACADEMIC PROGRAMS Prerequisite: ENGL 1101 with a grade of C or better", "prerequisites": [ "ENGL 1101" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL2110", "canonical_url": "/centralgatech/courses/engl-2110", "markdown_url": "/centralgatech/courses/engl-2110.md" }, { "id": "centralgatech-000312", "code": "EDUC 2000", "title": "| WRITTEN AND VERBAL", "credits": null, "hours": null, "description": "COMMUNICATION FOR TEACHERS (45-0-3) This course is designed to assist teaching candidates in developing communication skills required for successful and effective classroom instruction. Verbal and written communication skills in standard English will be emphasized. Candidates will perform a variety of communicative tasks to include emails, memoranda, essays, presentations and listening exercises. Topics include written and oral discourse, communication theory, propaganda, and scenario analysis. Prerequisite: ENGL 1101", "prerequisites": [ "ENGL 1101" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2000", "canonical_url": "/centralgatech/courses/educ-2000", "markdown_url": "/centralgatech/courses/educ-2000.md" }, { "id": "centralgatech-000313", "code": "CRJU 2060", "title": "Criminology 3", "credits": null, "hours": null, "description": "Program Specific Electives 6 XXXXX xxxx Program Specific Elective Student may select any 1000- and 2000-level occupational courses related to major OR degree-level general education courses not used above. Please consult with your faculty advisor and CGTC’s articulation website (www.centralgatech.edu/academics/articulation) for transfer options. Total Minimum Hours 60 ACADEMIC PROGRAMS CRIMINAL JUSTICE TECHNOLOGY (CJT3) Associate Degree Prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Graduates who are current practitioners will benefit through enhancement of career potential. Entry-level persons will be prepared to pursue diverse opportunities in the corrections, security, investigative, and police administration fields. Completion of this program does not ensure certification of officer status in Georgia; students must seek certification from the Peace Officer Standards and Training (P .O.S.T.) Council. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 15 Area I - Language Arts/Co", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2060", "canonical_url": "/centralgatech/courses/crju-2060", "markdown_url": "/centralgatech/courses/crju-2060.md" }, { "id": "centralgatech-000314", "code": "CRJU 2090", "title": "| CRIMINAL JUSTICE PRACTICUM", "credits": null, "hours": null, "description": "This course provides experiences necessary for further professional development and exposure to related agencies in the criminal justice field. The student will pursue a professional research project supervised by the instructor. Topics include: criminal justice theory applications. Prerequisite: Advisor approval", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2090", "canonical_url": "/centralgatech/courses/crju-2090", "markdown_url": "/centralgatech/courses/crju-2090.md" }, { "id": "centralgatech-000315", "code": "FOSC 2150", "title": "Case Preparation and Courtroom Testimony 4", "credits": null, "hours": null, "description": "Total Hours 60 CRIMINAL JUSTICE TECHNOLOGY (CJT2) Diploma Prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Graduates who are current practitioners will benefit through enhancement of career potential. Entry-level persons will be prepared to pursue diverse opportunities in the corrections, security, investigative, and police administration fields. Completion of this program does not ensure certification of officer status in Georgia; students must seek certification from the Peace Officer Standards and Training (P .O.S.T.) Council. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours General Education Core Courses 9", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FOSC2150", "canonical_url": "/centralgatech/courses/fosc-2150", "markdown_url": "/centralgatech/courses/fosc-2150.md" }, { "id": "centralgatech-000316", "code": "CRJU 1063", "title": "Crime Scene Processing 3", "credits": null, "hours": null, "description": "Total Hours 12 CRIMINAL JUSTICE FUNDAMENTALS (CJ71) Technical Certificate of Credit Prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Upon completion of this technical certificate of credit may permit students to pursue entry-level opportunities in the criminal justice field. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1063", "canonical_url": "/centralgatech/courses/crju-1063", "markdown_url": "/centralgatech/courses/crju-1063.md" }, { "id": "centralgatech-000317", "code": "CRJU 1040", "title": "Principles of Law Enforcement 3", "credits": null, "hours": null, "description": "Total Hours 12 CRIMINAL JUSTICE SPECIALIST (CJ21) Technical Certificate of Credit Prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Upon completion, this technical certificate of credit may permit students to pursue entry-level opportunities in the criminal justice field. Completion of this program does not ensure certification or officer status in Georgia; students must seek certification from the Peace Officer Standards and Training (P .O.S.T.) Council. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1040", "canonical_url": "/centralgatech/courses/crju-1040", "markdown_url": "/centralgatech/courses/crju-1040.md" }, { "id": "centralgatech-000318", "code": "CRJU 2020", "title": "Constitutional Law for Criminal Justice 3", "credits": null, "hours": null, "description": "Total Hours 15 INTRODUCTION TO CRIMINAL JUSTICE (IT51) Technical Certificate of Credit Introduces students to studies which may lead to criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Upon completion, students may pursue entry- level opportunities in the criminal justice field. Completion of this program does not ensure certification of officer status in Georgia; students must seek such certification from the Peace Officer Standards and Training (P .O.S.T.) Council. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2020", "canonical_url": "/centralgatech/courses/crju-2020", "markdown_url": "/centralgatech/courses/crju-2020.md" }, { "id": "centralgatech-000319", "code": "CRJU 2050", "title": "Criminal Procedure 3", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS SELECTED TOPICS FOR CRIMINAL JUSTICE (STI1) Technical Certificate of Credit Introduces the student to specific matters that are of distinctive relevance to criminal justice. Learning opportunities develop knowledge that is used as a basis for job related training as an entry point for a diploma or degree program, or pursuit of entry-level job acquisition. This program contains sufficient hours for in-service law enforcement to meet the college requirements of the Intermediate Certificate of the Career Development Program of the Georgia Peace Officers Standards and Training Council. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2050", "canonical_url": "/centralgatech/courses/crju-2050", "markdown_url": "/centralgatech/courses/crju-2050.md" }, { "id": "centralgatech-000320", "code": "CRJU 2070", "title": "Juvenile Justice 3", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE CULINARY CULINARY NUTRITION ASSISTANT (CNB1) Technical Certificate of Credit To deliver quality meals that contributes to the nutritional well-being of students. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2070", "canonical_url": "/centralgatech/courses/crju-2070", "markdown_url": "/centralgatech/courses/crju-2070.md" }, { "id": "centralgatech-000321", "code": "CUUL 1124", "title": "Foundations of Cooking Techniques", "credits": null, "hours": null, "description": "Total Hours 12 ACADEMIC PROGRAMS EARLY CHILDHOOD CARE AND EDUCATION EARLY CHILDHOOD CARE AND EDUCATION (EC13) Associate Degree Prepares students for a variety of careers in the field of early childhood education. The program emphasizes a combination of early childhood care and education theory and practical application as well as general core competencies necessary for successful employment. Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, Georgia Pre-K programs, and elementary school paraprofessional positions. Students will have to submit a satisfactory criminal background check and possible drug screen and/or tuberculosis skin test in order to be placed in an observation, lab, practicum or internship site to complete portions of their educational training. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 21 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1124", "canonical_url": "/centralgatech/courses/cuul-1124", "markdown_url": "/centralgatech/courses/cuul-1124.md" }, { "id": "centralgatech-000322", "code": "CUUL 1129", "title": "| FUNDAMENTALS OF RESTAURANT", "credits": null, "hours": null, "description": "OPERATIONS (30-75-4) Introduces the fundamentals of dining and beverage service and experience in preparation of a wide variety of quantity foods. Course content reflect American Culinary Federation Education Institute apprenticeship training objectives. Topics include dining service/guest service, dining service positions and functions, international dining services, restaurant business laws, preparation and setup, table side service, and beverage service and setup, kitchen operational procedures, equipment use, banquet planning, recipe conversion, food decorating, safety and sanitation, and production of quantity food. Laboratory practice parallels class work. Prerequisite: CUUL 1120", "prerequisites": [ "CUUL 1120" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1129", "canonical_url": "/centralgatech/courses/cuul-1129", "markdown_url": "/centralgatech/courses/cuul-1129.md" }, { "id": "centralgatech-000323", "code": "CUUL 1110", "title": "| CULINARY SAFETY AND SANITATION", "credits": null, "hours": null, "description": "(15-30-2) Emphasizes fundamental kitchen and dining room safety, sanitation, maintenance, and operation procedures. Topics include cleaning standards, O.S.H.A. M.S.D.S. guidelines, sanitary procedures following SERV-SAFE guidelines, HACCAP , safety practices, basic kitchen first aid, operation of equipment, cleaning and maintenance of equipment, dishwashing, and pot and pan cleaning. Laboratory practice parallels class work.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1110", "canonical_url": "/centralgatech/courses/cuul-1110", "markdown_url": "/centralgatech/courses/cuul-1110.md" }, { "id": "centralgatech-000324", "code": "ECCE 2245", "title": "Early Childhood Care and Education", "credits": null, "hours": null, "description": "Internship I 6 Total Hours 53 EARLY CHILDHOOD CARE AND EDUCATION BASICS (EC31) Technical Certificate of Credit Includes three basic courses that are needed for entry-level workers and provides an introductory course to the ECCE field, a child growth and development course, and health, safety, and nutrition course. Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. Bright from the Start (BFTS), the regulatory agency in Georgia requires the basic knowledge included in this program for a person to be a lead teacher in a child care center and family day care center. Students will have to submit a satisfactory criminal background check and possible drug screen and/or tuberculosis skin test in order to be placed in an observation, lab, practicum or internship site to complete portions of their educational training. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Hawkinsville | Putnam | Online Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2245", "canonical_url": "/centralgatech/courses/ecce-2245", "markdown_url": "/centralgatech/courses/ecce-2245.md" }, { "id": "centralgatech-000325", "code": "ECCE 2312", "title": "| PARAPROPESSIONAL ROLES AND", "credits": null, "hours": null, "description": "MATERIALS (45-0-3) This course develops skills to enable the student to work as a paraprofessional in a program for kindergarten through elementary aged children. Topics include professional qualifications, professional and ethical conduct, professionalism and employment, and paraprofessional roles and responsibilities. Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2312", "canonical_url": "/centralgatech/courses/ecce-2312", "markdown_url": "/centralgatech/courses/ecce-2312.md" }, { "id": "centralgatech-000326", "code": "ECCE 2322", "title": "Personnel Management", "credits": null, "hours": null, "description": "Total Hours 9 FAMILY CHILD CARE SPECIALIST (FC21) Technical Certificate of Credit The Early Childhood Care and Education Family Child Care Specialist certificate program is a sequence of courses designed to prepare students for in-home family child care. The program emphasizes a combination of early childhood care and education theory and practical application as well as management and regulations for in-home family child care. Graduates have qualifications to offer child care in his/her home or to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2322", "canonical_url": "/centralgatech/courses/ecce-2322", "markdown_url": "/centralgatech/courses/ecce-2322.md" }, { "id": "centralgatech-000327", "code": "ECCE 2362", "title": "Exploring Your Role in the Exceptional", "credits": null, "hours": null, "description": "Environment 3 Total Hours 9 ACADEMIC PROGRAMS EARLY CHILDHOOD PROGRAM ADMINISTRATION (ECP1) Technical Certificate of Credit Prepares students for a job as manager of a childcare learning center or a group day care center. The program emphasizes child growth and development and management and administration issues involved in managing a child care center. Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. Students will have to submit a satisfactory criminal background check and possible drug screen and/or tuberculosis skin test in order to be placed in an observation, lab, practicum or internship site to complete portions of their educational training. Education Requirements Admission: High School Diploma or High School Equivalency Graduation: High School Diploma or High School Equivalency Placement Measure: Entry-level Workforce Minimum Age: 18 Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2362", "canonical_url": "/centralgatech/courses/ecce-2362", "markdown_url": "/centralgatech/courses/ecce-2362.md" }, { "id": "centralgatech-000328", "code": "ECCE 2342", "title": "Family Child Care Business Management 3", "credits": null, "hours": null, "description": "Total Hours 72 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE EARLY CHILDHOOD CARE AND EDUCATION (ECC2) Diploma Prepares students for a variety of careers in the field of early childhood education. The program emphasizes a combination of early childhood care and education theory and practical application as well as limited general core competencies necessary for successful employment. Graduates have qualifications to be employed in early care and education settings including child care centers and Head Start. Students will have to submit a satisfactory criminal background check and possible drug screen and/or tuberculosis skin test in order to be placed in an observation, lab, practicum or internship site to complete portions of their educational training. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours General Education Core Courses 8", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2342", "canonical_url": "/centralgatech/courses/ecce-2342", "markdown_url": "/centralgatech/courses/ecce-2342.md" }, { "id": "centralgatech-000329", "code": "ECCE 1105", "title": "Health, Safety, and Nutrition 3", "credits": null, "hours": null, "description": "Total Hours 9 EARLY CHILDHOOD EXCEPTIONALITIES (EC41) Technical Certificate of Credit Prepares students to work with children with special needs and emphasizes an inclusive classroom including strategies and activities for exceptional children (both low and high achieving students). Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. Students will have to submit a satisfactory criminal background check and possible drug screen and/or tuberculosis skin test in order to be placed in an observation, lab, practicum or internship site to complete portions of their educational training. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1105", "canonical_url": "/centralgatech/courses/ecce-1105", "markdown_url": "/centralgatech/courses/ecce-1105.md" }, { "id": "centralgatech-000330", "code": "ECCE 2332", "title": "Infant/Toddler Group Care and Curriculum 3", "credits": null, "hours": null, "description": "Total Hours 15 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE FIREFIGHTER FIREFIGHTER I (FF11) Technical Certificate of Credit This program is conducted in cooperation with the Georgia Fire Academy and Georgia Firefighter Standards and Training to ensure graduates have the skills, knowledge and credentials to serve as firefighters in paid and volunteer fire departments. Graduates will be tested and certified at the state level. Education Requirements Admission: TCSG Standard Graduation: High School Diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment at Macon-Bibb Training Academy Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2332", "canonical_url": "/centralgatech/courses/ecce-2332", "markdown_url": "/centralgatech/courses/ecce-2332.md" }, { "id": "centralgatech-000331", "code": "FRSC 1141", "title": "| HAZARDOUS MATERIALS OPERATIONS", "credits": null, "hours": null, "description": "(45-30-4) This course provides emergency responder personnel with the information to respond safely, limit possible exposure to all personnel, and to provide information to the proper authorities as being a primary goal while reacting in the defensive mode of operation. The first responder operations level responsibilities are recognition and identification of a hazardous material scene, the gathering of information, the notification of the proper authorities, the isolation of the area by setting perimeters/zones, possible evacuation, protection by initiating the incident management system, emergency decontamination, and performing defensive actions only. Even though the first responder is a member of an emergency response service, they are not trained in specialized protective clothing or specialized control equipment. Thus, the first responder is not a member of a hazardous materials response team. This course meets the requirements of NFPA 472 - Professional Competence of First Responders to HazMat Incidents at the Operations Level. This course also meets the requirements of OSHA 29", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FRSC1141", "canonical_url": "/centralgatech/courses/frsc-1141", "markdown_url": "/centralgatech/courses/frsc-1141.md" }, { "id": "centralgatech-000332", "code": "HRTM 1110", "title": "| TRAVEL INDUSTRY AND TRAVEL", "credits": null, "hours": null, "description": "GEOGRAPHY - AMERICAS (45-0-3) Introduces students to the importance of the travel agent in the hospitality industry and provides an understanding of international, national, state, major cities and their points of interest to the travel customer. Emphasis is placed on career options, industry trends, and travel documents, identifying why people travel and how geography is linked to their needs. Topics include: terminology, agency operations, travel reference guides, airline industry, other transportation modes, hotels and resorts, individual travel needs, travel and tourism careers, miscellaneous services, geographical and physical aspects of the Americas and travel regulations and documents needed to travel internationally. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1110", "canonical_url": "/centralgatech/courses/hrtm-1110", "markdown_url": "/centralgatech/courses/hrtm-1110.md" }, { "id": "centralgatech-000333", "code": "HRTM 1230", "title": "| INTERNSHIP", "credits": null, "hours": null, "description": "This course introduces students to the application and reinforcement of hotel/restaurant/travel operational principles in an actual job placement or practicum experience. Students become acquainted with occupational responsibilities through realistic work situations and are provided with insights into management applications on the job. Topics include: problem solving, adaptability to the job setting, use of proper interpersonal skills, application of hotel/restaurant/travel management techniques, and professional development. The occupation-based instruction includes written individualized training plans and written performance evaluations. Prerequisite: HRTM 1100 Humanities", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1230", "canonical_url": "/centralgatech/courses/hrtm-1230", "markdown_url": "/centralgatech/courses/hrtm-1230.md" }, { "id": "centralgatech-000334", "code": "BCST 1000", "title": "| INTERPERSONAL DEVELOPMENT", "credits": null, "hours": null, "description": "This course helps the student to develop self-actualization skills. It includes skill development to work together effectively in a team, identify the steps involved in the job interviewing and job search process, appreciate difficult customers and provides the student with skills to calm angry customers and to resolve their problems, create an awareness of the importance of image, become more comfortable dealing with conflict situations, and to better understand and serve multicultural customers, both internal customers (co-workers) or external customers. Prerequisite: None", "prerequisites": [], "program_ids": [ "centralgatech-001116", "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1000", "canonical_url": "/centralgatech/courses/bcst-1000", "markdown_url": "/centralgatech/courses/bcst-1000.md" }, { "id": "centralgatech-000335", "code": "BCST 1010", "title": "Survey of Technology 3", "credits": null, "hours": null, "description": "or COMP 1000 Introduction to Computer Literacy (3) Total Hours 9 HOSPITALITY OPERATIONS ASSOCIATE (HP31) Technical Certificate of Credit The Hospitality Operations Associate program prepares students for employment in a variety of positions in today’s Hotel/Restaurant/Tourism fields. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of Hotel/Restaurant/Tourism. Education Requirements Admission: None Graduation: None Placement Measure: Entry-level Workforce Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Putnam | Online | GDC Credit Hours", "prerequisites": [], "program_ids": [ "centralgatech-001116", "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1010", "canonical_url": "/centralgatech/courses/bcst-1010", "markdown_url": "/centralgatech/courses/bcst-1010.md" }, { "id": "centralgatech-000336", "code": "HRTM 1201", "title": "| HOSPITALITY MARKETING", "credits": null, "hours": null, "description": "Introduces students to marketing techniques associated with hotel/restaurant/tourism fields with emphasis on identifying and satisfying needs of customers. Topics include: marketing introduction, research and analysis, marketing strategies, marketing plans, social media marketing, branding, positioning, sales and advertising. Because of the constant change in marketing strategies in the hospitality industry, this course will also focus on new marketing techniques that are being used in the hospitality industry. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1201", "canonical_url": "/centralgatech/courses/hrtm-1201", "markdown_url": "/centralgatech/courses/hrtm-1201.md" }, { "id": "centralgatech-000337", "code": "HRTM 1220", "title": "Supervision and Leadership in the", "credits": null, "hours": null, "description": "Hospitality Industry 3 Total Hours 18 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE LEGAL STUDIES LEGAL STUDIES (PS13) Associate Degree Prepares students for positions in the paralegal profession. Learning opportunities develop academic, technical and professional knowledge and skills required for job acquisition, retention, and advancement. The knowledge and skills emphasized in this program include ethical obligations; research in state and federal law; legal correspondence preparation; family law matters; basic concepts of real property law, criminal law and procedure, civil litigation, tort law, and substantive contract law; and wills, trusts, and probate. The program of study emphasizes opportunities that provide students with specialized legal knowledge and skills required to aid lawyers in the delivery of legal services. Note: Paralegals may not provide legal services directly to the public except as permitted by law. Education Requirements Admission: TCSG Standard Graduation: High school diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours General Education Core Courses 18 Area I - Language Arts/Communication", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1220", "canonical_url": "/centralgatech/courses/hrtm-1220", "markdown_url": "/centralgatech/courses/hrtm-1220.md" }, { "id": "centralgatech-000338", "code": "HRTM 1210", "title": "| HOSPITALITY LAW", "credits": null, "hours": null, "description": "This course introduces the student to local, state, federal, and international laws which govern the hospitality industry. Emphasis is placed on creating a workplace where compliance with the law, adherence to ethical standards, and stressing security and loss prevention are the basis for every decision. Topics include civil law, the structure of hospitality enterprises, government agencies that impact the hospitality industry, preventative legal management, contracts, employee selection and management, duties and obligations to employees and guests, and crisis management. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1210", "canonical_url": "/centralgatech/courses/hrtm-1210", "markdown_url": "/centralgatech/courses/hrtm-1210.md" }, { "id": "centralgatech-000339", "code": "LGST 2210", "title": "| PARALEGAL INTERNSHIP I", "credits": null, "hours": null, "description": "This course focuses on the application and reinforcement of paralegal skills in an actual workplace environment, or at the discretion of the instructor, in a school practicum with simulated work experiences. Students are acquainted with occupational responsibilities through realistic work situations and are provided with insights into paralegal applications on the job. Topics include: problem solving, adaptability to the job setting, use of proper interpersonal skills, application of paralegal skills in a workplace setting, and professional development. Note: Paralegals may not provide legal services directly to the public except as permitted by law. Prerequisite: ENGL 1101, LGST 1100, LGST 1105, LGST 1110,", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST2210", "canonical_url": "/centralgatech/courses/lgst-2210", "markdown_url": "/centralgatech/courses/lgst-2210.md" }, { "id": "centralgatech-000340", "code": "LGST 2215", "title": "Paralegal Internship II", "credits": null, "hours": null, "description": "Total Hours 69 ADVANCED LEGAL ASSISTANT (AL41) Technical Certificate of Credit Targeted to students with bachelor’s degrees who wish to prepare for paralegal positions in the law office, learning opportunities develop technical and professional knowledge and skills required for job acquisition, retention, and advancement. This certification, in addition to a bachelor’s degree, will make students eligible to sit for the Certified Paralegal exam by the National Association of Legal Assistants. Education Requirements Admission: Bachelor’s Degree Graduation: Bachelor’s Degree Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Warner Robins Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST2215", "canonical_url": "/centralgatech/courses/lgst-2215", "markdown_url": "/centralgatech/courses/lgst-2215.md" }, { "id": "centralgatech-000341", "code": "LGST 1150", "title": "Contracts, Commercial Law and Business", "credits": null, "hours": null, "description": "Organizations 3 Total Hours 27 ACADEMIC PROGRAMS PUBLIC SAFETY & PROFESSIONAL SERVICES TECHNICAL CERTIFICATES ENVIRONMENTAL HORTICULTURE TECHNICIAN (EH11) Technical Certificate of Credit Prepares students to engage in the propagation, growing and marketing of plants for use in the home, business or the landscape greenhouse and nursery operations. The program provides a solid foundation of plant knowledge and nursery, garden center skills to equip students to work effectively in nurseries, retail garden centers, and entrepreneurial enterprises. The program emphasizes hands-on learning and most courses incorporate lab activities that apply knowledge and skills in realistic settings. Education Requirements Admission: None Graduation: None Placement Measure: Entry-Level Workforce Certificate Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1150", "canonical_url": "/centralgatech/courses/lgst-1150", "markdown_url": "/centralgatech/courses/lgst-1150.md" }, { "id": "centralgatech-000342", "code": "HORT 1310", "title": "Irrigation and Water Management 4", "credits": null, "hours": null, "description": "Total Hours 18 GREENHOUSE PRODUCTION FUNDAMENTALS (GPF1) Technical Certificate of Credit This certificate provides an understanding of horticulture as it relates to nursery stock and vegetable production. Instruction includes plant science, soil science, pest management, plant propagation and nursery production. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: GDC Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1310", "canonical_url": "/centralgatech/courses/hort-1310", "markdown_url": "/centralgatech/courses/hort-1310.md" }, { "id": "centralgatech-000343", "code": "HORT 1100", "title": "Introduction to Sustainable Agriculture 3", "credits": null, "hours": null, "description": "Total Hours 7 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE General Studies Early College Essentials Education General Studies Interdisciplinary Studies Psychology Social Work Technical Specialist Technical Studies ACADEMIC PROGRAMS EARLY COLLEGE ESSENTIALS EARLY COLLEGE ESSENTIALS (EC21) Technical Certificate of Credit Designed for a cooperative agreement between technical colleges and four-year colleges/universities in the area. These students have been identified as capable of performing academically at the college level; some are disengaged at the high school and are at risk of dropping out. Education Requirements Admission: None Graduation: None Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Dual Enrollment Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1100", "canonical_url": "/centralgatech/courses/hort-1100", "markdown_url": "/centralgatech/courses/hort-1100.md" }, { "id": "centralgatech-000344", "code": "EDUC 2001", "title": "| LIFE AND EARTH SCIENCE FOR", "credits": null, "hours": null, "description": "ELEMENTARY/EARLY CHILDHOOD EDUCATORS (45-0-3) An integrated overview of the core life and earth science content covered in the K-5 Georgia Standards of Excellence and Performance Standards. Topics include the solar system, earth processes, living organisms, biodiversity, and the natural history of Georgia. Prerequisite: ENGL/READ Placement Score", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2001", "canonical_url": "/centralgatech/courses/educ-2001", "markdown_url": "/centralgatech/courses/educ-2001.md" }, { "id": "centralgatech-000345", "code": "EDUC 2002", "title": "| PHYSICAL SCIENCE FOR ELEMENTARY/", "credits": null, "hours": null, "description": "EARLY CHILDHOOD EDUCATORS (45-0-3) An introductory mathematics course for Education majors seeking Elementary teacher certification. This course will emphasize the understanding and use of major concepts of number and operations. As a general theme, strategies of problem solving will be used and discussed in the context of various topics. Prerequisite: MATH 1101 or MATH 1103 or MATH 1111", "prerequisites": [ "MATH 1101", "MATH 1103", "MATH 1111" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2002", "canonical_url": "/centralgatech/courses/educ-2002", "markdown_url": "/centralgatech/courses/educ-2002.md" }, { "id": "centralgatech-000346", "code": "EDUC 2008", "title": "| MATHEMATICS FOR ELEMENTARY/EARLY", "credits": null, "hours": null, "description": "CHILDHOOD EDUCATORS (45-0-3) An introductory mathematics course for Education majors seeking Elementary teacher certification. This course will emphasize the understanding and use of major concepts of number and operations. As a general theme, strategies of problem solving will be used and discussed in the context of various topics. Prerequisite: MATH 1101 or MATH 1103 or MATH 1111", "prerequisites": [ "MATH 1101", "MATH 1103", "MATH 1111" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2008", "canonical_url": "/centralgatech/courses/educ-2008", "markdown_url": "/centralgatech/courses/educ-2008.md" }, { "id": "centralgatech-000347", "code": "EDUC 2120", "title": "| EXPLORING SOCIOCULTURAL", "credits": null, "hours": null, "description": "PERSPECTIVES AND DIVERSITY IN EDUCATIONAL CONTEXT (45-0-3) Fundamental knowledge of understanding culture and teaching children from diverse backgrounds. Specifically, this course is designed to examine the nature and function of culture; the development of individual and group cultural identity; definitions and implications of diversity; and the influence of culture on learning, development and pedagogy. Successful completion of 10 hours of field experience is required. This course prepares students for transfer to complete a Bachelor’s of Education degree in Elementary or Middle Grades Education. Students interested in B.S.Ed. transfer should enroll under the General Studies AS major. EDUC courses are accepted for Area F transfer credit as specified in select CGTC articulation agreements for General Studies.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2120", "canonical_url": "/centralgatech/courses/educ-2120", "markdown_url": "/centralgatech/courses/educ-2120.md" }, { "id": "centralgatech-000348", "code": "EDUC 2130", "title": "| EXPLORING TEACHING AND LEARNING", "credits": null, "hours": null, "description": "(45-0-3) The study of educational psychology concepts through examination of learning and teaching processes, with the goal of applying this knowledge to enhance the learning of all students in a variety of educational settings and contexts. Successful completion of 10 hours of field experience is ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE required. This course prepares students for transfer to complete a Bachelor’s of Education degree in Elementary or Middle Grades Education. Students interested in B.S.Ed. transfer should enroll under the General Studies AS major. EDUC courses are accepted for Area F transfer credit as specified in select CGTC articulation agreements for General Studies. Electronics Technology", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2130", "canonical_url": "/centralgatech/courses/educ-2130", "markdown_url": "/centralgatech/courses/educ-2130.md" }, { "id": "centralgatech-000349", "code": "MATH 1131", "title": "| CALCULUS I", "credits": null, "hours": null, "description": "Topics include the study of limits and continuity, derivatives, and integrals of functions of one variable. Applications are incorporated from a variety of disciplines. Algebraic, trigonometric, exponential, and logarithmic functions are studied. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Prerequisite: MATH 1113 with a grade of C or better OR appropriate math placement score", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1131", "canonical_url": "/centralgatech/courses/math-1131", "markdown_url": "/centralgatech/courses/math-1131.md" }, { "id": "centralgatech-000350", "code": "SOCW 2130", "title": "Social Welfare, Ethics, and Community", "credits": null, "hours": null, "description": "Service 3 Program Specific Electives 3 XXXXX xxxx Program Specific Elective Student may select any 1000- and 2000-level occupational courses related to major OR degree-level general education courses not used above. Please consult with your faculty advisor and CGTC’s articulation website (www.centralgatech.edu/academics/articulation) for transfer options. Total Minimum Hours 60 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE TECHNICAL SPECIALIST TECHNICAL SPECIALIST (TC31) Technical Certificate of Credit Prepares students for positions in business that require technical proficiency to translate technical information to various audiences and in various formats using written and oral communication skills. Education Requirements Admission: TCSG Standard Graduation: High school diploma or High School Equivalency Placement Measure: Standard Minimum Age: TCSG Standard Location(s) Offered: Macon | Milledgeville | Warner Robins Online Credit Hours", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SOCW2130", "canonical_url": "/centralgatech/courses/socw-2130", "markdown_url": "/centralgatech/courses/socw-2130.md" }, { "id": "centralgatech-000351", "code": "ACCT 1105", "title": "| FINANCIAL ACCOUNTING II", "credits": null, "hours": null, "description": "Introduces the intermediate financial accounting concepts that provide the student with the necessary skills to maintain a set of books for a partnership and corporation. Topics include: fixed and intangible assets, current and long- term liabilities (notes payable), payroll, accounting for a partnership, accounting for a corporation, statement of cash flows, and financial statement analysis. Laboratory work demonstrates theory presented in class. Prerequisite: ACCT 1100 and instructor approval for provisional students", "prerequisites": [], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001094", "centralgatech-001095", "centralgatech-001096", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1105", "canonical_url": "/centralgatech/courses/acct-1105", "markdown_url": "/centralgatech/courses/acct-1105.md" }, { "id": "centralgatech-000352", "code": "ACCT 1115", "title": "| COMPUTERIZED ACCOUNTING", "credits": null, "hours": null, "description": "Emphasizes operation of computerized accounting systems from manual input forms. Topics include: company creation (service and merchandising), chart of accounts, customers transactions, banking activities, merchandise inventory, employees and payroll, and financial reports. Laboratory work includes theoretical and technical application. Prerequisite: ACCT 1100, COMP 1000", "prerequisites": [ "ACCT 1100", "COMP 1000" ], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001094", "centralgatech-001095", "centralgatech-001096", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1115", "canonical_url": "/centralgatech/courses/acct-1115", "markdown_url": "/centralgatech/courses/acct-1115.md" }, { "id": "centralgatech-000353", "code": "ACCT 1120", "title": "| SPREADSHEET APPLICATIONS", "credits": null, "hours": null, "description": "This course covers the knowledge and skills to use spreadsheet software through course demonstrations, laboratory exercises and projects. Topics and assignments will include: spreadsheet concepts, creating and manipulating data, formatting data and content, creating and modifying formulas, presenting data visually and collaborating and securing data. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1120", "canonical_url": "/centralgatech/courses/acct-1120", "markdown_url": "/centralgatech/courses/acct-1120.md" }, { "id": "centralgatech-000354", "code": "ACCT 1125", "title": "| INDIVIDUAL TAX ACCOUNTING", "credits": null, "hours": null, "description": "Provides instruction for the preparation of individual federal income tax returns. Topics include: taxable income, income adjustments, schedules, standard deductions, itemized deductions, exemptions, tax credits, and tax calculations.", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001091", "centralgatech-001092", "centralgatech-001093", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT1125", "canonical_url": "/centralgatech/courses/acct-1125", "markdown_url": "/centralgatech/courses/acct-1125.md" }, { "id": "centralgatech-000355", "code": "ACCT 2000", "title": "| MANAGERIAL ACCOUNTING", "credits": null, "hours": null, "description": "Emphasizes the interpretation of data by management in planning and controlling business activities. Topics include managerial accounting concepts, manufacturing accounting using a job order cost system, manufacturing accounting using a process cost system, cost behavior and cost-volume-profit, budgeting and standard cost accounting, flexible budgets, standard costs and variances, and capital investment analysis and budgeting. Laboratory work demonstrates theory presented in class. Prerequisite: ACCT 1105", "prerequisites": [ "ACCT 1105" ], "program_ids": [ "centralgatech-001091", "centralgatech-001092", "centralgatech-001093", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2000", "canonical_url": "/centralgatech/courses/acct-2000", "markdown_url": "/centralgatech/courses/acct-2000.md" }, { "id": "centralgatech-000356", "code": "ACCT 2120", "title": "| BUSINESS TAX ACCOUNTING", "credits": null, "hours": null, "description": "This course provides instruction for preparation of both state and federal partnership, corporation and other business tax returns. Topics include: organization form, overview of taxation of partnership, special partnership issues, corporate tax elections, adjustments to income and expenses, tax elections, forms and schedules, tax credits, reconciliation of book and tax income, tax depreciation methods, and tax calculations. Prerequisite: ACCT 1125", "prerequisites": [ "ACCT 1125" ], "program_ids": [ "centralgatech-001092", "centralgatech-001093", "centralgatech-001094", "centralgatech-001097", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2120", "canonical_url": "/centralgatech/courses/acct-2120", "markdown_url": "/centralgatech/courses/acct-2120.md" }, { "id": "centralgatech-000357", "code": "ACCT 2135", "title": "| INTRODUCTION TO GOVERNMENTAL AND", "credits": null, "hours": null, "description": "NONPROFIT ACCOUNTING (45-0-3) This course provides an introduction to financial reporting and accounting principles for state/local governments and nonprofit entities. Prerequisite: ACCT 1105", "prerequisites": [ "ACCT 1105" ], "program_ids": [ "centralgatech-001092", "centralgatech-001094", "centralgatech-001097", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACCT2135", "canonical_url": "/centralgatech/courses/acct-2135", "markdown_url": "/centralgatech/courses/acct-2135.md" }, { "id": "centralgatech-000358", "code": "ACRP 1000", "title": "| INTRODUCTION TO AUTO COLLISION", "credits": null, "hours": null, "description": "REPAIR (54-12-4) This course provides instruction in procedures and practices necessary for safe and compliant operation of auto collision repair facilities. It introduces the structural configuration and identification of the structural members of various unibodies and frames used for automobiles as well as equipment and hand tools used in collision repair tasks.", "prerequisites": [], "program_ids": [ "centralgatech-001018", "centralgatech-001019" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP1000", "canonical_url": "/centralgatech/courses/acrp-1000", "markdown_url": "/centralgatech/courses/acrp-1000.md" }, { "id": "centralgatech-000359", "code": "ACRP 1005", "title": "| AUTOMOBILE COMPONENT REPAIR AND", "credits": null, "hours": null, "description": "REPLACEMENT (26-79-4) This course provides instruction in removal and replacement methods of a variety of non-structural cosmetic and safety features of the automobile as well as bolt-on body panels. Co-requisite: ACRP 1000", "prerequisites": [], "program_ids": [ "centralgatech-001018", "centralgatech-001019" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP1005", "canonical_url": "/centralgatech/courses/acrp-1005", "markdown_url": "/centralgatech/courses/acrp-1005.md" }, { "id": "centralgatech-000360", "code": "ACRP 1010", "title": "| FOUNDATIONS OF COLLISION REPAIR", "credits": null, "hours": null, "description": "(29-111-5) This course introduces the materials, tools, and operations required to repair minor collision damage and it provides instruction in non-metallic auto body repair techniques. Co-requisite: ACRP 1000, ACRP 1005", "prerequisites": [], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP1010", "canonical_url": "/centralgatech/courses/acrp-1010", "markdown_url": "/centralgatech/courses/acrp-1010.md" }, { "id": "centralgatech-000361", "code": "ACRP 2001", "title": "| INTRODUCTION TO AUTO PAINTING AND", "credits": null, "hours": null, "description": "REFINISHING (45-62-5) This course covers the safety precautions followed during the painting and refinishing processes used in a shop during collision repairs. Basic surface preparations will be discussed and practiced. Spray gun types and basic operations will also be introduced. Co-requisite: ACRP 1000, ACRP 1010", "prerequisites": [], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP2001", "canonical_url": "/centralgatech/courses/acrp-2001", "markdown_url": "/centralgatech/courses/acrp-2001.md" }, { "id": "centralgatech-000362", "code": "ACRP 2002", "title": "| PAINTING AND REFINISHING TECHNIQUES", "credits": null, "hours": null, "description": "(39-71-5) This course covers the fundamental refinishing tasks of mixing, matching and applying various types of automotive paints. Paint defect causes and cures will be examined in depth. Final delivery detailing and tasks will also be practiced and discussed. Co-requisite: ACRP 1000, ACRP 2001", "prerequisites": [], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP2002", "canonical_url": "/centralgatech/courses/acrp-2002", "markdown_url": "/centralgatech/courses/acrp-2002.md" }, { "id": "centralgatech-000363", "code": "ACRP 2108", "title": "| REFINISHIG INTERNSHIP I", "credits": null, "hours": null, "description": "Provides occupation based learning opportunities for students pursuing the Paint and Refinishing specialization. Students will be mentored by qualified professional technicians as they experience working in the Automotive Collision Repair profession in an industry standard commercial repair facility or industry standard simulated on-campus facility. Topics include: sanding, priming, and paint preparation.; special refinishing applications; urethane enamels; tint and match colors; and detailing Prerequisite: ACRP 1000", "prerequisites": [ "ACRP 1000" ], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP2108", "canonical_url": "/centralgatech/courses/acrp-2108", "markdown_url": "/centralgatech/courses/acrp-2108.md" }, { "id": "centralgatech-000364", "code": "ACRP 2109", "title": "| REFINISHING INTERNSHIP II", "credits": null, "hours": null, "description": "Provides continued occupation-based learning opportunities for students pursuing the Paint and Refinishing specialization. Students will be mentored by qualified professional technicians as they experience working in the Automotive Collision Repair profession in an industry standard commercial repair facility or industry standard simulated on-campus facility. Topics include: sanding, priming and paint preparation, special refinishing applications; urethane enamels; tint and match colors; and detailing. Air Conditioning Technology", "prerequisites": [], "program_ids": [ "centralgatech-001018" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ACRP2109", "canonical_url": "/centralgatech/courses/acrp-2109", "markdown_url": "/centralgatech/courses/acrp-2109.md" }, { "id": "centralgatech-000365", "code": "AIRC 1005", "title": "| REFRIGERATION FUNDAMENTALS", "credits": null, "hours": null, "description": "(45-45-4) Introduces the basic concepts, theories, and safety regulations and procedures of refrigeration. Topics include an introduction to OSHA, safety, first aid, laws of thermodynamics, pressure and temperature relationships, heat transfer, the refrigerant cycle, refrigerant identification, and types of AC systems.", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000997", "centralgatech-000998" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1005", "canonical_url": "/centralgatech/courses/airc-1005", "markdown_url": "/centralgatech/courses/airc-1005.md" }, { "id": "centralgatech-000366", "code": "AIRC 1010", "title": "| REFRIGERATION PRINCIPLES AND", "credits": null, "hours": null, "description": "PRACTICES (45-45-4) This course introduces the student to basic refrigeration system principles and practices, and the major component parts of the refrigeration system. Topics include refrigeration tools, piping practices, service valves, leak testing, refrigerant recovery, recycling, and reclamation, evacuation, charging, and refrigeration safety. Co-requisite: AIRC 1005", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000997" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1010", "canonical_url": "/centralgatech/courses/airc-1010", "markdown_url": "/centralgatech/courses/airc-1010.md" }, { "id": "centralgatech-000367", "code": "AIRC 1030", "title": "| HVACR ELECTRICAL FUNDAMENTALS", "credits": null, "hours": null, "description": "(45-45-4) This course provides an introduction to fundamental electrical concepts and theories as applied to the air conditioning industry. Topics include AC and DC theory, electric meters, electrical diagrams, distribution systems, electrical panels, voltage circuits, code requirements, and safety.", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000996" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1030", "canonical_url": "/centralgatech/courses/airc-1030", "markdown_url": "/centralgatech/courses/airc-1030.md" }, { "id": "centralgatech-000368", "code": "AIRC 1040", "title": "HVACR ELECTRICAL MOTORS", "credits": null, "hours": null, "description": "ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE This course provides the student with the skills and knowledge necessary for application and service of electric motors commonly used by the refrigeration and air conditioning industry. Topics include diagnostic techniques, capacitors, installation procedures, types of electric motors, electric motor service, and safety. Prerequisite: AIRC 1030", "prerequisites": [ "AIRC 1030" ], "program_ids": [ "centralgatech-000995", "centralgatech-000996" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1040", "canonical_url": "/centralgatech/courses/airc-1040", "markdown_url": "/centralgatech/courses/airc-1040.md" }, { "id": "centralgatech-000369", "code": "AIRC 1060", "title": "| AIR CONDITIONING SYSTEMS", "credits": null, "hours": null, "description": "APPLICATION AND INSTALLATION (45-45-4) This course provides instruction on the installation and service of residential air conditioning systems. Topics include: installation procedures, split-systems, add-on systems, packaged systems, system wiring, control circuits, and safety. Co-requisite: AIRC 1010, AIRC 1030", "prerequisites": [], "program_ids": [ "centralgatech-000995", "centralgatech-000998" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1060", "canonical_url": "/centralgatech/courses/airc-1060", "markdown_url": "/centralgatech/courses/airc-1060.md" }, { "id": "centralgatech-000370", "code": "AIRC 1070", "title": "| GAS HEAT", "credits": null, "hours": null, "description": "This course introduces principles of combustion and service requirements for gas heating systems. Topics include servicing procedures, electrical controls, piping, gas valves, venting, code requirements, principles of combustion, and safety. Prerequisite: AIRC 1030", "prerequisites": [ "AIRC 1030" ], "program_ids": [ "centralgatech-000995" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1070", "canonical_url": "/centralgatech/courses/airc-1070", "markdown_url": "/centralgatech/courses/airc-1070.md" }, { "id": "centralgatech-000371", "code": "AIRC 1080", "title": "| HEAT PUMPS AND RELATED SYSTEMS", "credits": null, "hours": null, "description": "(45-45-4) This course provides instruction on the principles, applications, and operation of a residential heat pump system. Topics include installation and servicing procedures, electrical components, geothermal ground source energy supplies, dual fuel, valves, and troubleshooting techniques. Prerequisite: AIRC 1010, AIRC 1030", "prerequisites": [ "AIRC 1010", "AIRC 1030" ], "program_ids": [ "centralgatech-000995" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AIRC1080", "canonical_url": "/centralgatech/courses/airc-1080", "markdown_url": "/centralgatech/courses/airc-1080.md" }, { "id": "centralgatech-000372", "code": "ALHS 1060", "title": "| DIET AND NUTRITION FOR ALLIED HEALTH", "credits": null, "hours": null, "description": "SCIENCES (30-0-2) A study of the nutritional needs of the individual. Topics include: nutrients, standard and modified diets, nutrition throughout the lifespan, and client education. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1060", "canonical_url": "/centralgatech/courses/alhs-1060", "markdown_url": "/centralgatech/courses/alhs-1060.md" }, { "id": "centralgatech-000373", "code": "ALHS 1126", "title": "| HEALTH SCIENCE PHYSICS", "credits": null, "hours": null, "description": "This course introduces the student to the basic laws of physics with specific applications for health science students. Topics include basic Newtonian mechanics, fluid mechanics, heat and temperature, medical imaging techniques that utilize electromagnetic radiation and sound, basic principles of waves, light, and sound, basic principles of electricity and magnetism, and electrical safety. Prerequisite: Degree-level Math Placement Test Score", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1126", "canonical_url": "/centralgatech/courses/alhs-1126", "markdown_url": "/centralgatech/courses/alhs-1126.md" }, { "id": "centralgatech-000374", "code": "ALHS 1127", "title": "| HEALTH SCIENCES CHEMISTRY", "credits": null, "hours": null, "description": "This course introduces basic chemical principles and concepts which explain the behavior of matter. Topics include measurement and units, atomic structure, chemical bonding, physical states of matter, nomenclature, stoichiometry, acids and bases, gases, liquid mixtures, nuclear chemistry, organic chemistry and biochemistry. Prerequisite: Degree-level Math Placement Test Score", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1127", "canonical_url": "/centralgatech/courses/alhs-1127", "markdown_url": "/centralgatech/courses/alhs-1127.md" }, { "id": "centralgatech-000375", "code": "ALHS 1200", "title": "| OPERATING ROOM FUNDAMENTALS", "credits": null, "hours": null, "description": "60-4) This course provides an overview of operating room concepts and principles. Topics include introduction to preoperative, intraoperative, and postoperative principles of the operating room; assistant circulator role, professionalism as well as health care facility information. Prerequisite: ALHS 1040; CPR/BLS Certification Advanced Machine Tool ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ALHS1200", "canonical_url": "/centralgatech/courses/alhs-1200", "markdown_url": "/centralgatech/courses/alhs-1200.md" }, { "id": "centralgatech-000376", "code": "AMCA 2110", "title": "| CNC FUNDAMENTALS", "credits": null, "hours": null, "description": "This course provides a comprehensive introduction to computer numerical controlled (CNC) machining processes. Topics include safety, Computer Numerical Control of machinery, setup and operation of CNC machinery, introduction to programming of CNC machinery, introduction to computer-aided design (CAD) and computer-aided manufacturing (CAM). Prerequisite: MCHT 1011, MCHT 1012", "prerequisites": [ "MCHT 1011", "MCHT 1012" ], "program_ids": [ "centralgatech-001076", "centralgatech-001079" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AMCA2110", "canonical_url": "/centralgatech/courses/amca-2110", "markdown_url": "/centralgatech/courses/amca-2110.md" }, { "id": "centralgatech-000377", "code": "AMCA 2130", "title": "| CNC MILL PROGRAMMING", "credits": null, "hours": null, "description": "This course provides instruction for the safe operation and manual programming of computer numerical controlled (CNC) milling machines. Topics include safety, calculation for programming, program codes and structure, program run and editing of programs. Co-requisite: AMCA 2110", "prerequisites": [], "program_ids": [ "centralgatech-001079" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AMCA2130", "canonical_url": "/centralgatech/courses/amca-2130", "markdown_url": "/centralgatech/courses/amca-2130.md" }, { "id": "centralgatech-000378", "code": "AMCA 2150", "title": "| CNC LATHE PROGRAMMING", "credits": null, "hours": null, "description": "This course provides instruction for the safe operation and manual programming of computer numerical controlled (CNC) Lathes. Topics include safety, calculations for programming, program codes and structure, program run and editing of programs. Co-requisite: AMCA 2110", "prerequisites": [], "program_ids": [ "centralgatech-001079" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AMCA2150", "canonical_url": "/centralgatech/courses/amca-2150", "markdown_url": "/centralgatech/courses/amca-2150.md" }, { "id": "centralgatech-000379", "code": "AMCA 2170", "title": "| CNC PRACTICAL APPLICATIONS", "credits": null, "hours": null, "description": "This course provides additional instruction in part holding and fixture design. Students will also gain additional experience in print-to-part development of CNC programming. Topics include safety, fixture design and manufacturing, and CNC part manufacturing. Prerequisite: AMCA 2110, AMCA 2130, AMCA 2150", "prerequisites": [ "AMCA 2110", "AMCA 2130", "AMCA 2150" ], "program_ids": [ "centralgatech-001079" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AMCA2170", "canonical_url": "/centralgatech/courses/amca-2170", "markdown_url": "/centralgatech/courses/amca-2170.md" }, { "id": "centralgatech-000380", "code": "ASTT 1011", "title": "| BASIC BLUEPRINT READING", "credits": null, "hours": null, "description": "This course introduces basic blueprint reading. Emphasis will be placed on reading and interpreting blueprints found in a manufacturing environment. Topics include: lines and symbols, orthographic drawings, views, material, form and position, title blocks, sketching, features, and sections.", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001000", "centralgatech-001002", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1011", "canonical_url": "/centralgatech/courses/astt-1011", "markdown_url": "/centralgatech/courses/astt-1011.md" }, { "id": "centralgatech-000381", "code": "ASTT 1041", "title": "| STRUCTURAL LAYOUT AND FABRICATION", "credits": null, "hours": null, "description": "(60-90-7) Continues the development of knowledge and skills required to perform basic aerospace layout and fabrication. Emphasizes the safe use of stationary equipment. Topics include: machine safety, stationary equipment, bend allowance, fasteners layout, parts fabrication, special fasteners, and geometric functions.", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001001" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1041", "canonical_url": "/centralgatech/courses/astt-1041", "markdown_url": "/centralgatech/courses/astt-1041.md" }, { "id": "centralgatech-000382", "code": "ASTT 1051", "title": "| AEROSPACE QUALITY MANAGEMENT", "credits": null, "hours": null, "description": "(30-0-2) Introduces the student to the concept of Aerospace Quality Management Systems used in the American workplace. Topics include: history of quality management, principles of quality, tools used in quality systems, quality team building. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001059", "centralgatech-001137", "centralgatech-001138", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1051", "canonical_url": "/centralgatech/courses/astt-1051", "markdown_url": "/centralgatech/courses/astt-1051.md" }, { "id": "centralgatech-000383", "code": "ASTT 1070", "title": "| AERODYNAMICS", "credits": null, "hours": null, "description": "This course presents the theory of flight and aircraft design as it applies to the manufacturing and repair processes. Topics include: terminology, theory of flight, structural design, control surfaces, and stress and fatigue.", "prerequisites": [], "program_ids": [ "centralgatech-000999", "centralgatech-001000", "centralgatech-001001" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1070", "canonical_url": "/centralgatech/courses/astt-1070", "markdown_url": "/centralgatech/courses/astt-1070.md" }, { "id": "centralgatech-000384", "code": "ASTT 1100", "title": "| SEALANTS", "credits": null, "hours": null, "description": "Provides instruction in the surface preparation, application, and safe handling of sealants used in the aerospace structures repair and manufacturing industry. Topics include: safety, surface preparation, sealants application, sealants shelf life, sealants cure times, and sealants removal.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1100", "canonical_url": "/centralgatech/courses/astt-1100", "markdown_url": "/centralgatech/courses/astt-1100.md" }, { "id": "centralgatech-000385", "code": "ASTT 1111", "title": "| CORROSION CONTROL", "credits": null, "hours": null, "description": "Emphasizes the development of knowledge and skills necessary to assess damage due to corrosion and take corrective action. Topics include: safety; corrosion theory; corrosion removal, repair, and treatment; and corrosion prevention.", "prerequisites": [], "program_ids": [ "centralgatech-000999" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1111", "canonical_url": "/centralgatech/courses/astt-1111", "markdown_url": "/centralgatech/courses/astt-1111.md" }, { "id": "centralgatech-000386", "code": "ASTT 1120", "title": "| AIRCRAFT METALLURGY", "credits": null, "hours": null, "description": "Introduces the types of metals used in aircraft construction and provides a study of their properties and working ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE characteristics. Topics include: safety, types of metals, properties of metals, methods of identification, heat treatments, temper designations, and working characteristics.", "prerequisites": [], "program_ids": [ "centralgatech-000999" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ASTT1120", "canonical_url": "/centralgatech/courses/astt-1120", "markdown_url": "/centralgatech/courses/astt-1120.md" }, { "id": "centralgatech-000387", "code": "AUMF 1100", "title": "| INTRODUCTION TO CYBER-PHYSICAL", "credits": null, "hours": null, "description": "SYSTEMS (30-0-2) This course will introduce students to the concepts of cyber- physical systems including, but not limited to, competencies involving manufacturing, automation, computer science, Industry 4.0, sensor technologies, digital twins, artificial intelligence, and machine learning. This course will be the first course taken in the degree program. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001007" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1100", "canonical_url": "/centralgatech/courses/aumf-1100", "markdown_url": "/centralgatech/courses/aumf-1100.md" }, { "id": "centralgatech-000388", "code": "AUMF 1120", "title": "| PROGRAMMABLE CONTROLLERS", "credits": null, "hours": null, "description": "120-5) This course studies basic programmable controller application skills and techniques, and programmable controllers in typical environments as an element of a complex manufacturing cell. Topics also discussed will include the hands-on development of the programming, operation, and maintenance of industrial PLC systems.", "prerequisites": [], "program_ids": [ "centralgatech-001007" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1120", "canonical_url": "/centralgatech/courses/aumf-1120", "markdown_url": "/centralgatech/courses/aumf-1120.md" }, { "id": "centralgatech-000389", "code": "AUMF 1300", "title": "| ARTIFICIAL INTELLIGENCE IN", "credits": null, "hours": null, "description": "MANUFACTURING (30-0-2) This course provides foundational knowledge of current and emerging uses of artificial intelligence in the modern manufacturing context. Topics include defining AI, understanding AI learning and data sources, use cases of AI in manufacturing, and understanding the dynamics of human- ai interaction.", "prerequisites": [], "program_ids": [ "centralgatech-001007" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1300", "canonical_url": "/centralgatech/courses/aumf-1300", "markdown_url": "/centralgatech/courses/aumf-1300.md" }, { "id": "centralgatech-000390", "code": "AUMF 1500", "title": "| MACHINE VISION FUNDAMENTALS", "credits": null, "hours": null, "description": "75-3) In this course, students will explore machine vision technologies. Topics include machine vision software, hardware, and programming. Students will program machine vision technologies to perform basic vision tasks such as identification, sorting, and counting. Prerequisite: AUMF 1120", "prerequisites": [ "AUMF 1120" ], "program_ids": [ "centralgatech-001007" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1500", "canonical_url": "/centralgatech/courses/aumf-1500", "markdown_url": "/centralgatech/courses/aumf-1500.md" }, { "id": "centralgatech-000391", "code": "AUMF 1520", "title": "| MANUFACTURING ORGANIZATIONAL", "credits": null, "hours": null, "description": "PRINCIPLES (15-0-1) This course provides an overview of the functional and structural composition of organizations. Topics include supply and demand, product flow, types of manufacturing processes, plant safety, structure of manufacturing organizations, manufacturing business principles, employee impact on the bottom line, and workplace ethics.", "prerequisites": [], "program_ids": [ "centralgatech-001009" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1520", "canonical_url": "/centralgatech/courses/aumf-1520", "markdown_url": "/centralgatech/courses/aumf-1520.md" }, { "id": "centralgatech-000392", "code": "AUMF 1540", "title": "| MANUFACTURING WORKFORCE SKILLS", "credits": null, "hours": null, "description": "(30-0-2) This course provides the personal and interpersonal effectiveness skills required to succeed in the manufacturing environment. Topics include listening, communication, team skills, personal wellness, problem solving, managing change, and creating a positive image.", "prerequisites": [], "program_ids": [ "centralgatech-001009" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1540", "canonical_url": "/centralgatech/courses/aumf-1540", "markdown_url": "/centralgatech/courses/aumf-1540.md" }, { "id": "centralgatech-000393", "code": "AUMF 1560", "title": "| MANUFACTURING PRODUCTION", "credits": null, "hours": null, "description": "REQUIREMENTS (15-0-1) This course provides knowledge and skills associated with quality and productivity in the manufacturing environment. Topics include world class manufacturing, statistical process control, and problem solving.", "prerequisites": [], "program_ids": [ "centralgatech-001009" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUMF1560", "canonical_url": "/centralgatech/courses/aumf-1560", "markdown_url": "/centralgatech/courses/aumf-1560.md" }, { "id": "centralgatech-000394", "code": "AUTT 1011", "title": "| BASIC AUTO MAINTENANCE AND LIGHT", "credits": null, "hours": null, "description": "REPAIR I (50-85-6) This course introduces students to basic automotive system checks and inspection procedures practiced in virtually all service shops. Fundamental service procedures are also covered. Co-requisite: AUTT 1010", "prerequisites": [], "program_ids": [ "centralgatech-001026" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1011", "canonical_url": "/centralgatech/courses/autt-1011", "markdown_url": "/centralgatech/courses/autt-1011.md" }, { "id": "centralgatech-000395", "code": "AUTT 1012", "title": "| AUTO MAINTENANCE AND LIGHT REPAIR", "credits": null, "hours": null, "description": "II (27-152-6) This course exposes students to the basic maintenance procedures and light repair operations performed by auto technicians on a regular basis on all eight areas of the vehicle. Prerequisite: AUTT 1010, AUTT 1011", "prerequisites": [ "AUTT 1010", "AUTT 1011" ], "program_ids": [ "centralgatech-001026" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1012", "canonical_url": "/centralgatech/courses/autt-1012", "markdown_url": "/centralgatech/courses/autt-1012.md" }, { "id": "centralgatech-000396", "code": "AUTT 1015", "title": "| AUTOMOTIVE ELECTRICAL PRINCIPLES", "credits": null, "hours": null, "description": "(30-30-3) This course introduces automotive electrical principles emphasizing basic electrical circuit laws and diagnosis and service/repair of 12V batteries.", "prerequisites": [], "program_ids": [ "centralgatech-001028" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1015", "canonical_url": "/centralgatech/courses/autt-1015", "markdown_url": "/centralgatech/courses/autt-1015.md" }, { "id": "centralgatech-000397", "code": "AUTT 1021", "title": "| AUTOMOTIVE ELECTRICAL SYSTEMS I", "credits": null, "hours": null, "description": "(17-120-4) Introduces automotive electricity, emphasizes the basic principles, diagnosis, and service/repair of batteries, starting systems, starting system components, and basic lighting systems. Co-requisite: AUTT 1010", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022", "centralgatech-001023", "centralgatech-001024", "centralgatech-001025", "centralgatech-001027" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1021", "canonical_url": "/centralgatech/courses/autt-1021", "markdown_url": "/centralgatech/courses/autt-1021.md" }, { "id": "centralgatech-000398", "code": "AUTT 1022", "title": "| AUTOMOTIVE ELECTRICAL SYSTEMS II", "credits": null, "hours": null, "description": "(13-89-3) This course emphasizes the basic principles, diagnosis, and service/repair of charging systems, advanced lighting systems, instrument cluster and driver information systems, and body electrical systems. Co-requisite: AUTT 1021", "prerequisites": [], "program_ids": [ "centralgatech-001020", "centralgatech-001021", "centralgatech-001022", "centralgatech-001023", "centralgatech-001024", "centralgatech-001025", "centralgatech-001027" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1022", "canonical_url": "/centralgatech/courses/autt-1022", "markdown_url": "/centralgatech/courses/autt-1022.md" }, { "id": "centralgatech-000399", "code": "AUTT 1041", "title": "| AUTOMOTIVE ENGINE PERFORMANCE I", "credits": null, "hours": null, "description": "(13-87-3) This course introduces basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions. Topics include: general engine diagnosis, fuel and air induction, exhaust systems, PCV control system diagnosis and repair, and other related engine service. Prerequisite: AUTT 1020 OR AUTT 1021 AND AUTT 1022", "prerequisites": [ "AUTT 1020", "AUTT 1021", "AUTT 1022" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1041", "canonical_url": "/centralgatech/courses/autt-1041", "markdown_url": "/centralgatech/courses/autt-1041.md" }, { "id": "centralgatech-000400", "code": "AUTT 1042", "title": "| AUTOMOTIVE ENGINE PERFORMANCE II", "credits": null, "hours": null, "description": "(17-113-4) This course continues basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions. Topics include: computerized engine controls and diagnosis, ignition system diagnosis and repair, and advanced emission control systems diagnosis and repair. Prerequisite: AUTT 1020, AUTT 1022", "prerequisites": [ "AUTT 1020", "AUTT 1022" ], "program_ids": [ "centralgatech-001020", "centralgatech-001021" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT1042", "canonical_url": "/centralgatech/courses/autt-1042", "markdown_url": "/centralgatech/courses/autt-1042.md" }, { "id": "centralgatech-000401", "code": "AUTT 2011", "title": "| AUTOMOTIVE ENGINE REPAIR I", "credits": null, "hours": null, "description": "This course introduces the student to automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines. Topics include general engine diagnosis; removal and reinstallation; basic cylinder heads and valve trains diagnosis and repair; and lubrication and cooling systems diagnosis and repair. Co-requisite: AUTT 1010", "prerequisites": [], "program_ids": [ "centralgatech-001021", "centralgatech-001025" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2011", "canonical_url": "/centralgatech/courses/autt-2011", "markdown_url": "/centralgatech/courses/autt-2011.md" }, { "id": "centralgatech-000402", "code": "AUTT 2012", "title": "| AUTOMOTIVE ENGINE REPAIR II", "credits": null, "hours": null, "description": "This course continues automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines. Topics include advanced cylinder heads and valve trains diagnosis and repair; and engine blocks assembly, ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE diagnosis and repair. Co-requisite: AUTT 2011", "prerequisites": [], "program_ids": [ "centralgatech-001021", "centralgatech-001025" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2012", "canonical_url": "/centralgatech/courses/autt-2012", "markdown_url": "/centralgatech/courses/autt-2012.md" }, { "id": "centralgatech-000403", "code": "AUTT 2020", "title": "| AUTOMOTIVE MANUAL DRIVE TRAIN", "credits": null, "hours": null, "description": "AND AXLES (31-69-4) This course introduces basics of rear-wheel drive, front-wheel drive, and four-wheel drive line related operation, diagnosis, service and related electronic controls. Topics include: drive shaft and half shaft, universal and constant-velocity (CV) joint diagnosis and repair; ring and pinion gears and differential case assembly; limited slip differential; drive axle shaft; four-wheel drive/all-wheel drive component diagnosis and repair. Introduces basics of front and rear-wheel drive. Clutch operation, diagnosis and service is included. Electronic controls related to transmission/transaxles operation are discussed. Topics include: clutch diagnosis and repair; transmission/transaxles diagnosis and repair. Co-requisite: AUTT 1010", "prerequisites": [], "program_ids": [ "centralgatech-001021", "centralgatech-001027" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2020", "canonical_url": "/centralgatech/courses/autt-2020", "markdown_url": "/centralgatech/courses/autt-2020.md" }, { "id": "centralgatech-000404", "code": "AUTT 2200", "title": "| EV/HYBRID VEHICLES INTRODUCTION", "credits": null, "hours": null, "description": "AND SAFETY PROTOCOLS (30-30-3) This course introduces experienced automotive technicians to the differences in operation and service procedures for EV and Hybrid vehicles. The fundamental safety protocols that must be observed when performing service procedures on these types of vehicles are also addressed in detail. Topics include review of electrical/electronic system principles, types of EV/Hybrid vehicles in the market, safety equipment, PPE and special tooling, and standard EV/Hybrid shop safety protocols. Prerequisite: AUTT 1040", "prerequisites": [ "AUTT 1040" ], "program_ids": [ "centralgatech-001029" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2200", "canonical_url": "/centralgatech/courses/autt-2200", "markdown_url": "/centralgatech/courses/autt-2200.md" }, { "id": "centralgatech-000405", "code": "AUTT 2205", "title": "| EV/HYBRID VEHICLE BATTERIES AND", "credits": null, "hours": null, "description": "POWERTRAINS (30-30-3) This course covers general aspects and designs of batteries used in industry and automotive applications as well as battery support systems used in Hybrid/EV vehicles. General powertrain designs for auto applications are also discussed. Topics include battery design types, battery interlocks and sensing/management systems, 3-phase motors and other unique Hybrid/EV components. Prerequisite: AUTT 1040", "prerequisites": [ "AUTT 1040" ], "program_ids": [ "centralgatech-001029" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2205", "canonical_url": "/centralgatech/courses/autt-2205", "markdown_url": "/centralgatech/courses/autt-2205.md" }, { "id": "centralgatech-000406", "code": "AUTT 2210", "title": "| EV/HYBRID VEHICLE BATTERY AND", "credits": null, "hours": null, "description": "POWERTRAIN SERVICE (15-60-3) This course covers the unique aspects of EV and Hybrid vehicle air conditioning and heating systems as well chassis and battery support systems. Topics covered include EV and hybrid cabin cooling and heating systems, HV battery support systems, and EV chassis systems. Prerequisite: AUTT 1040", "prerequisites": [ "AUTT 1040" ], "program_ids": [ "centralgatech-001029" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2210", "canonical_url": "/centralgatech/courses/autt-2210", "markdown_url": "/centralgatech/courses/autt-2210.md" }, { "id": "centralgatech-000407", "code": "AUTT 2215", "title": "| EV/HYBRID VEHICLE BODY , CHASSIS", "credits": null, "hours": null, "description": "HVAC, AND SUPPORT SYSTEMS (30-30-3) This course covers the unique aspects of EV and Hybrid vehicle air conditioning and heating systems as well chassis and battery support systems. Topics covered include EV and hybrid cabin cooling and heating systems, HV battery support systems, and EV chassis systems. Prerequisite: AUTT 1040 Aviation Maintenance Technology", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AUTT2215", "canonical_url": "/centralgatech/courses/autt-2215", "markdown_url": "/centralgatech/courses/autt-2215.md" }, { "id": "centralgatech-000408", "code": "AVMT 1001", "title": "| AVIATION MATHEMATICS", "credits": null, "hours": null, "description": "This course provides students with the knowledge, risk management, and skills associated with mathematics as it relates to aircraft maintenance. Topics include algebraic concepts, extract roots and raise numbers to a given power, area and volume of geometrical shapes, and ratio, proportion, and percentage problems. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1001", "canonical_url": "/centralgatech/courses/avmt-1001", "markdown_url": "/centralgatech/courses/avmt-1001.md" }, { "id": "centralgatech-000409", "code": "AVMT 1011", "title": "| AIRCRAFT MAINTENANCE REGULATIONS", "credits": null, "hours": null, "description": "(30-30-3) This course provides students with the knowledge, risk management, and skills associated with regulations, maintenance forms, records, publications, and human factors. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1011", "canonical_url": "/centralgatech/courses/avmt-1011", "markdown_url": "/centralgatech/courses/avmt-1011.md" }, { "id": "centralgatech-000410", "code": "AVMT 1021", "title": "| AIRCRAFT APPLIED SCIENCES I", "credits": null, "hours": null, "description": "This course provides students with knowledge, risk management, and skills associated with materials, hardware, and processes, ground operations and servicing, and aircraft cleaning, corrosion control, aircraft finishes, and aircraft inspection concepts and techniques. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1021", "canonical_url": "/centralgatech/courses/avmt-1021", "markdown_url": "/centralgatech/courses/avmt-1021.md" }, { "id": "centralgatech-000411", "code": "AVMT 1026", "title": "| AIRCRAFT APPLIED SCIENCES II", "credits": null, "hours": null, "description": "This course provides students with the knowledge, risk management, and skills associated with aircraft drawings, weight and balance, and fluid lines and fittings. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1026", "canonical_url": "/centralgatech/courses/avmt-1026", "markdown_url": "/centralgatech/courses/avmt-1026.md" }, { "id": "centralgatech-000412", "code": "AVMT 1031", "title": "| AIRCRAFT ELECTRICITY AND", "credits": null, "hours": null, "description": "ELECTRONICS (45-60-5) This course provides students with a knowledge, risk management, and skills associated with basic electricity and electronics. Topics include relationship of voltage, current, resistance, and continuity in electrical circuits, electrical circuit diagrams, electrical power, capacitance and inductance, batteries, and solid-state devices.", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1031", "canonical_url": "/centralgatech/courses/avmt-1031", "markdown_url": "/centralgatech/courses/avmt-1031.md" }, { "id": "centralgatech-000413", "code": "AVMT 1211", "title": "| AVIATION PHYSICS", "credits": null, "hours": null, "description": "ACADEMIC PROGRAMS This course provides students with the knowledge, risk management, and skills associated with aviation physics. Topics include temperature, physics fundamentals, pressure, temperature, and volume of air mass, basic aerodynamics and theory of flight, physical factors affecting engine output, relationship of pressure, area, and force, and principles of simple machines. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT1211", "canonical_url": "/centralgatech/courses/avmt-1211", "markdown_url": "/centralgatech/courses/avmt-1211.md" }, { "id": "centralgatech-000414", "code": "AVMT 2021", "title": "| AIRFRAME SHEET METAL", "credits": null, "hours": null, "description": "This course provides students with knowledge, risk management, and skills associated with aircraft metallic structures. Topics include sheet metal structures introductions, conventional and special rivets and fasteners, sheet metal form, lay out and bend, and welding. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2021", "canonical_url": "/centralgatech/courses/avmt-2021", "markdown_url": "/centralgatech/courses/avmt-2021.md" }, { "id": "centralgatech-000415", "code": "AVMT 2026", "title": "| AIRFRAME NON-METALLIC STRUCTURES", "credits": null, "hours": null, "description": "(15-60-3) This course provides students with knowledge, risk management, and skills associated with aircraft non-metallic structures. Topics include wood structures and coverings, composite structures, plastic structures, windows, and interior furnishings. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2026", "canonical_url": "/centralgatech/courses/avmt-2026", "markdown_url": "/centralgatech/courses/avmt-2026.md" }, { "id": "centralgatech-000416", "code": "AVMT 2041", "title": "| AIRFRAME ASSEMBLY AND RIGGING", "credits": null, "hours": null, "description": "(15-30-2) This course provides students with knowledge, risk management, and skills associated with aircraft flight controls and rotorcraft fundamentals. Topics include assembly and rigging; of fixed wing aircraft; assembly and rigging of rotary wing aircraft; and aircraft components, including flight control surfaces. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2041", "canonical_url": "/centralgatech/courses/avmt-2041", "markdown_url": "/centralgatech/courses/avmt-2041.md" }, { "id": "centralgatech-000417", "code": "AVMT 2051", "title": "| AIRFRAME INSPECTION", "credits": null, "hours": null, "description": "This course provides students with knowledge, risk management, and skills associated with airframe inspection Topics include airframe conformity and airframe air worthiness.", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2051", "canonical_url": "/centralgatech/courses/avmt-2051", "markdown_url": "/centralgatech/courses/avmt-2051.md" }, { "id": "centralgatech-000418", "code": "AVMT 2061", "title": "| AIRCRAFT HYDRAULIC AND PNEUMATIC", "credits": null, "hours": null, "description": "SYSTEMS (15-30-2) This course provides students with knowledge, risk management, and skills associated with aircraft hydraulic and pneumatic power systems. Topics include aircraft hydraulic systems; and pneumatic power systems. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2061", "canonical_url": "/centralgatech/courses/avmt-2061", "markdown_url": "/centralgatech/courses/avmt-2061.md" }, { "id": "centralgatech-000419", "code": "AVMT 2071", "title": "| AIRCRAFT LANDING GEAR SYSTEMS", "credits": null, "hours": null, "description": "(30-60-4) This course students with knowledge, risk management, and skills associated with aircraft landing gear. Topics include repair landing gear retraction systems and shock struts; brakes, wheels, and tires; and steering systems. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2071", "canonical_url": "/centralgatech/courses/avmt-2071", "markdown_url": "/centralgatech/courses/avmt-2071.md" }, { "id": "centralgatech-000420", "code": "AVMT 2081", "title": "| AIRCRAFT ENVIRONMENTAL CONTROL", "credits": null, "hours": null, "description": "SYSTEMS (30-30-3) This course provides students with knowledge, risk management, and skills associated with environmental control, aircraft ice and rain control systems. Topics cabin atmosphere control systems; ice and rain control systems; and airframe fire protection systems. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2081", "canonical_url": "/centralgatech/courses/avmt-2081", "markdown_url": "/centralgatech/courses/avmt-2081.md" }, { "id": "centralgatech-000421", "code": "AVMT 2086", "title": "| AIRCRAFT FUEL AND INSTRUMENT", "credits": null, "hours": null, "description": "SYSTEMS (30-30-3) This course provides students with knowledge, risk management, and skills associated with aircraft fuel systems, aircraft instrument systems, and water and waste systems. Topics aircraft fuel systems; aircraft instrument systems, and water and waste systems. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2086", "canonical_url": "/centralgatech/courses/avmt-2086", "markdown_url": "/centralgatech/courses/avmt-2086.md" }, { "id": "centralgatech-000422", "code": "AVMT 2091", "title": "| AIRCRAFT ELECTRICAL SYSTEMS", "credits": null, "hours": null, "description": "(45-60-5) This course provides students with knowledge, risk management, and skills associated with aircraft electrical systems. Topics include power generation and distribution, electrical components, and electrical troubleshooting and maintenance.", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001032" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2091", "canonical_url": "/centralgatech/courses/avmt-2091", "markdown_url": "/centralgatech/courses/avmt-2091.md" }, { "id": "centralgatech-000423", "code": "AVMT 2211", "title": "| RECIPROCATING ENGINE POWERPLANTS", "credits": null, "hours": null, "description": "(30-60-4) This course students with knowledge, risk management, and skills associated with aircraft reciprocating engines. Topics include: aircraft reciprocating engine theory, and aircraft reciprocating engine repair and maintenance. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2211", "canonical_url": "/centralgatech/courses/avmt-2211", "markdown_url": "/centralgatech/courses/avmt-2211.md" }, { "id": "centralgatech-000424", "code": "AVMT 2231", "title": "| GAS TURBINE POWERPLANTS", "credits": null, "hours": null, "description": "This course provides students with knowledge, risk management, and skills associated with aircraft turbine engines. Topics include aircraft gas turbine engine theory and removal, installation, inspection, and troubleshooting.", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2231", "canonical_url": "/centralgatech/courses/avmt-2231", "markdown_url": "/centralgatech/courses/avmt-2231.md" }, { "id": "centralgatech-000425", "code": "AVMT 2251", "title": "| GAS TURBINE POWERPLANTS", "credits": null, "hours": null, "description": "This course provides students with knowledge, risk management, and skills associated with aircraft engine inspections. Topics include aircraft powerplant conformity inspection and aircraft powerplant airworthiness inspection.", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2251", "canonical_url": "/centralgatech/courses/avmt-2251", "markdown_url": "/centralgatech/courses/avmt-2251.md" }, { "id": "centralgatech-000426", "code": "AVMT 2261", "title": "| AIRCRAFT ENGINE FUEL AND FUEL", "credits": null, "hours": null, "description": "METERING SYSTEMS (30-60-4) This course provides students with knowledge, risk management, and skills associated with engine fuel and fuel metering systems. Topics include engine fuel system components reciprocating fuel metering, turbine fuel metering, and inspect, check, service, troubleshoot, and repair engine fuel systems. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2261", "canonical_url": "/centralgatech/courses/avmt-2261", "markdown_url": "/centralgatech/courses/avmt-2261.md" }, { "id": "centralgatech-000427", "code": "AVMT 2271", "title": "| POWERPLANT INSTRUMENTS, FIRE", "credits": null, "hours": null, "description": "PROTECTION AND ELECTRICAL SYSTEMS (30-30-3) This course provides students with knowledge, risk management, and skills associated with aircraft engine instrument systems, aircraft engine fire protection systems, and engine electrical systems. Topics include aircraft engine instrument systems, aircraft engine protection systems, and aircraft engine electrical systems. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Prerequisite: AVMT 1031", "prerequisites": [ "AVMT 1031" ], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2271", "canonical_url": "/centralgatech/courses/avmt-2271", "markdown_url": "/centralgatech/courses/avmt-2271.md" }, { "id": "centralgatech-000428", "code": "AVMT 2276", "title": "| POWERPLANT IGNITION AND STARTING", "credits": null, "hours": null, "description": "SYSTEMS (45-30-4) This course provides students with knowledge, risk management, and skills associated with ignition and starting systems. Topics include reciprocating and turbine engine ignition and starting systems. Prerequisite: AVMT 1031", "prerequisites": [ "AVMT 1031" ], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2276", "canonical_url": "/centralgatech/courses/avmt-2276", "markdown_url": "/centralgatech/courses/avmt-2276.md" }, { "id": "centralgatech-000429", "code": "AVMT 2281", "title": "| AIRCRAFT POWERPLANT ACCESSORY", "credits": null, "hours": null, "description": "SYSTEMS (30-30-3) This course provides students with knowledge, risk management, and skills associated with aircraft lubricant systems, aircraft reciprocating engine induction and cooling systems, turbine engine air systems, and engine exhaust and reverser systems. Topics include reciprocating engine induction and cooling systems, turbine engine air systems, and engine exhaust and reverser systems. Prerequisite: AVMT 2211, AVMT 2231", "prerequisites": [ "AVMT 2211", "AVMT 2231" ], "program_ids": [ "centralgatech-001030", "centralgatech-001031", "centralgatech-001033" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#AVMT2281", "canonical_url": "/centralgatech/courses/avmt-2281", "markdown_url": "/centralgatech/courses/avmt-2281.md" }, { "id": "centralgatech-000430", "code": "BAFN 1100", "title": "| INTRODUCTION TO BANKING AND", "credits": null, "hours": null, "description": "FINANCE (45-0-3) This course introduces the student to the history, documents, and operational functions of the banking industry. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN1100", "canonical_url": "/centralgatech/courses/bafn-1100", "markdown_url": "/centralgatech/courses/bafn-1100.md" }, { "id": "centralgatech-000431", "code": "BAFN 1105", "title": "| BANK BUSINESS AND INFORMATION", "credits": null, "hours": null, "description": "SYSTEMS (15-60-3) The course emphasizes basic calculator functions with problem solving, types of banking equipment, teller skills and duties and procedures for bank reconciliations. Prerequisite: MATH 1011 or MATH 1111", "prerequisites": [ "MATH 1011", "MATH 1111" ], "program_ids": [ "centralgatech-001098", "centralgatech-001099" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN1105", "canonical_url": "/centralgatech/courses/bafn-1105", "markdown_url": "/centralgatech/courses/bafn-1105.md" }, { "id": "centralgatech-000432", "code": "BAFN 1110", "title": "| MONEY AND BANKING", "credits": null, "hours": null, "description": "The course emphasizes the relevance of monetary instruments, financial intermediaries, and the central banks as they impact local, state, national, and international economics. Topics include the history and evolution of financial institutions, monetary instruments and flow; and central banking, operations, and policies. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001098", "centralgatech-001099", "centralgatech-001100", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN1110", "canonical_url": "/centralgatech/courses/bafn-1110", "markdown_url": "/centralgatech/courses/bafn-1110.md" }, { "id": "centralgatech-000433", "code": "BAFN 2200", "title": "| FINANCE", "credits": null, "hours": null, "description": "This course provides an introduction to financial markets, institutions, and management in contemporary society. Emphasis is placed on developing an understanding of the financial markets in which funds are traded, the financial institutions participating in facilitating the trade of such funds, and the financial principles and concepts behind sound financial management. Topics include financial systems of the United States, business finance management, and financing other sectors of the economy. Prerequisite: ACCT 1100", "prerequisites": [ "ACCT 1100" ], "program_ids": [ "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN2200", "canonical_url": "/centralgatech/courses/bafn-2200", "markdown_url": "/centralgatech/courses/bafn-2200.md" }, { "id": "centralgatech-000434", "code": "BAFN 2205", "title": "| REAL ESTATE FINANCE", "credits": null, "hours": null, "description": "Emphasizes the relevance of land value, legal titles, legal descriptions, types of real estate finance, leverage of real estate, bank funding requirement, mortgage amortizations, financial theory, and real estate markets. Topics include the history of real estate, real estate concepts, real estate finance functions, real estate finance theory, and real estate investment activities.", "prerequisites": [], "program_ids": [ "centralgatech-001098", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN2205", "canonical_url": "/centralgatech/courses/bafn-2205", "markdown_url": "/centralgatech/courses/bafn-2205.md" }, { "id": "centralgatech-000435", "code": "BAFN 2210", "title": "| CONTEMPORARY BANK MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course emphasizes the relevance of banks and the economy, bank regulations and policy, bank organizational structure, bank management, the financial institutions environment, bank deregulation, and asset/liability management. Topics include the history of commercial bank management, commercial bank management development, bank management concepts, major banking legislation, the Federal Reserve organization, monetary and fiscal policy tools, management strategies, and business loan pricing. Prerequisite: BAFN 1100, BAFN 1110, BAFN 1115", "prerequisites": [ "BAFN 1100", "BAFN 1110", "BAFN 1115" ], "program_ids": [ "centralgatech-001098", "centralgatech-001106" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN2210", "canonical_url": "/centralgatech/courses/bafn-2210", "markdown_url": "/centralgatech/courses/bafn-2210.md" }, { "id": "centralgatech-000436", "code": "BAFN 2215", "title": "| INVESTMENTS", "credits": null, "hours": null, "description": "This course introduces the student to the fundamentals concepts of personal investment planning, personal investments, the various financial investments available for use, and their relative applicability. Emphasis is placed on developing a full understanding of the types of investments available to individuals, how these investments can be used and how to evaluate their performance. Topics include general investment information, investment planning, equity (stock) investments, debt (bond) investments, mutual funds, retirement planning, and retirement plans. Prerequisite: BAFN 1115 Barbering", "prerequisites": [], "program_ids": [ "centralgatech-001098", "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BAFN2215", "canonical_url": "/centralgatech/courses/bafn-2215", "markdown_url": "/centralgatech/courses/bafn-2215.md" }, { "id": "centralgatech-000437", "code": "BARB 1000", "title": "| INTRODUCTION TO BARBER/STYLING", "credits": null, "hours": null, "description": "IMPLEMENTS (45-0-3) Introduction to Barber/Styling Implements is designed to give an overview of the barbering profession. Students are also taught the fundamentals of each barber/styling implement. Emphasis will be placed on the maintenance and care of each implement. Topics include: Barbering history, personality development, professional barbering ethics, and professional barbering image, safety, and reception and telephone techniques, nomenclature, types and sizes, proper use and care, and maintenance.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1000", "canonical_url": "/centralgatech/courses/barb-1000", "markdown_url": "/centralgatech/courses/barb-1000.md" }, { "id": "centralgatech-000438", "code": "BARB 1010", "title": "| SCIENCE: STERILIZATION, SANITATION", "credits": null, "hours": null, "description": "AND BACTERIOLOGY (30-45-3) Introduces fundamental theories and practices of bacteriology, sterilization, sanitation, safety, and the welfare of the barber/stylist and patron. Topics include: sterilization, sanitation, safety, bacteriology, and Hazardous Duty Standards Act compliance. ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1010", "canonical_url": "/centralgatech/courses/barb-1010", "markdown_url": "/centralgatech/courses/barb-1010.md" }, { "id": "centralgatech-000439", "code": "BARB 1024", "title": "| BASIC HAIRCUTTING", "credits": null, "hours": null, "description": "This course continues the theory and skills necessary to apply basic haircutting techniques. Safe use of haircutting implements are stressed. The course also introduces the fundamental theory and skills required to shampoo hair. Laboratory training includes shampooing a live model. Topics include patron preparation, haircutting terminology, safety and sanitation, implements, basic haircutting techniques, shampoo chemistry, and shampoo procedures.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1024", "canonical_url": "/centralgatech/courses/barb-1024", "markdown_url": "/centralgatech/courses/barb-1024.md" }, { "id": "centralgatech-000440", "code": "BARB 1030", "title": "| HAIRCUTTING/BASIC STYLING", "credits": null, "hours": null, "description": "Continues the theory and application of haircutting techniques and introduces hairstyling. Topics include: introduction to styling, client consultation, head and hair analysis, style cutting techniques, and implements for style cutting and tapering techniques", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1030", "canonical_url": "/centralgatech/courses/barb-1030", "markdown_url": "/centralgatech/courses/barb-1030.md" }, { "id": "centralgatech-000441", "code": "BARB 1040", "title": "| SHAVING", "credits": null, "hours": null, "description": "Introduces the theory and skills necessary to prepare and shave a patron. Simulated shaving procedures will precede practice on live models. Topics include: patron preparation, beard preparation, shaving techniques, once-over shave techniques, and safety precautions.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1040", "canonical_url": "/centralgatech/courses/barb-1040", "markdown_url": "/centralgatech/courses/barb-1040.md" }, { "id": "centralgatech-000442", "code": "BARB 1050", "title": "| SCIENCE: ANATOMY AND PHYSIOLOGY", "credits": null, "hours": null, "description": "(45-0-3) Develops knowledge of the function and care of the scalp, skin, and hair. Emphasis is placed on the function, health, and growth of these areas. Topics include: cells, skeletal system, muscular system, nervous system, circulatory system, and related systems.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1050", "canonical_url": "/centralgatech/courses/barb-1050", "markdown_url": "/centralgatech/courses/barb-1050.md" }, { "id": "centralgatech-000443", "code": "BARB 1060", "title": "| INTRODUCTION TO COLOR THEORY/", "credits": null, "hours": null, "description": "COLOR APPLICATION (15-83-3) Introduces the fundamental theory of color, predispositions tests, color selection, and color application. Presents the application of temporary, semi-permanent, and permanent hair coloring products. Topics include: basic color concepts, skin reactions, the color wheel, color selection and application, mustache and beards, coloring products, safety precautions and tests, mixing procedures, color selection and application.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1060", "canonical_url": "/centralgatech/courses/barb-1060", "markdown_url": "/centralgatech/courses/barb-1060.md" }, { "id": "centralgatech-000444", "code": "BARB 1072", "title": "| CHEMICAL PERMANENT WAVING", "credits": null, "hours": null, "description": "SERVICES (15-83-3) This course introduces the chemistry and chemical reactions of permanent wave solutions and relaxers. It provides instruction in the application of permanent waves and hair relaxers. Precautions and special problems involved in applying permanent waves and relaxers will be emphasized. Application of perms and relaxers on live models is included. Topics include permanent wave techniques, safety procedures, chemical relaxer techniques, and permanent wave and chemical relaxer, application procedures on manikins, timed permanent wave, timed relaxer applications, safety precautions, and Hazardous Duty Standard Act.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1072", "canonical_url": "/centralgatech/courses/barb-1072", "markdown_url": "/centralgatech/courses/barb-1072.md" }, { "id": "centralgatech-000445", "code": "BARB 1074", "title": "| CHEMICAL HAIR RELAXERS SERVICES", "credits": null, "hours": null, "description": "(15-83-3) This course builds on the Chemical Permanent Waving Services course to address advanced theory and practice relating to the chemistry and chemical reactions of permanent waves and hair relaxers. It provides continuing instruction in the precautions and special problems involved in the application of permanent waves and relaxers. Application of perms and relaxers on live models is included. Topics include permanent wave techniques, safety procedures, chemical relaxer techniques, application procedures on manikins, times permanent wave, timed relaxer applications, and Hazardous Duty Standard Act.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1074", "canonical_url": "/centralgatech/courses/barb-1074", "markdown_url": "/centralgatech/courses/barb-1074.md" }, { "id": "centralgatech-000446", "code": "BARB 1082", "title": "| PRACTICUM I", "credits": null, "hours": null, "description": "This course continues instruction in the theory and application of haircutting and styling techniques. Topics include elevation and design cutting, introduction to hairpieces, blow-dry styling, thermal waving and curling, advanced haircutting and styling; use of clippers, shears, and razor; permanent waving and styling; shaving techniques and beard trimming.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1082", "canonical_url": "/centralgatech/courses/barb-1082", "markdown_url": "/centralgatech/courses/barb-1082.md" }, { "id": "centralgatech-000447", "code": "BARB 1084", "title": "| PRACTICUM II", "credits": null, "hours": null, "description": "This course continues instruction in the theory and application of haircutting and styling techniques. Topics include elevation and design cutting, introduction to hairpieces, blow-dry styling, thermal waving and curling, advanced haircutting and styling; use of clippers, shears, and razor; permanent waving and styling; shaving techniques and beard trimming.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1084", "canonical_url": "/centralgatech/courses/barb-1084", "markdown_url": "/centralgatech/courses/barb-1084.md" }, { "id": "centralgatech-000448", "code": "BARB 1100", "title": "| LIVE WORK PRACTICUM", "credits": null, "hours": null, "description": "Provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The requirements for this course may be met in a laboratory setting or in a combination of a laboratory setting and an approved internship facility. Topics include: haircutting/styling, hairstyling texturizing, shaving, beard trimming, thermal waving, hairpiece fitting and styling, safety precautions, and licensure preparation.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BARB1100", "canonical_url": "/centralgatech/courses/barb-1100", "markdown_url": "/centralgatech/courses/barb-1100.md" }, { "id": "centralgatech-000449", "code": "BCST 1020", "title": "| OFFICE MANAGEMENT", "credits": null, "hours": null, "description": "This course provides the student with basic principles of operating a business, using numbers in business to perform many calculations, draft concise, easy-to-read business correspondence, help participants to identify, prioritize, and re-prioritize tasks as situations arise and change and introduce a systematic problem-solving process to be applied in a customer service setting. Prerequisite: None", "prerequisites": [], "program_ids": [ "centralgatech-001116", "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1020", "canonical_url": "/centralgatech/courses/bcst-1020", "markdown_url": "/centralgatech/courses/bcst-1020.md" }, { "id": "centralgatech-000450", "code": "BCST 1040", "title": "| EMPLOYEE EFFECTIVENESS", "credits": null, "hours": null, "description": "This course provides the student with an introduction to computer use and the Microsoft operating environment. It is designed as a guide for the beginner. Topics include working in the Windows 2010 operating environment, word processing, spreadsheets, databases, and electronic animated presentations. Prerequisite: None", "prerequisites": [], "program_ids": [ "centralgatech-001115" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1040", "canonical_url": "/centralgatech/courses/bcst-1040", "markdown_url": "/centralgatech/courses/bcst-1040.md" }, { "id": "centralgatech-000451", "code": "BCST 1050", "title": "| WORD PROCESSING CONCEPTS", "credits": null, "hours": null, "description": "This course provides the student with an introduction to computer use and the Microsoft operating environment. It is designed as a guide for the beginner. Topics include working in the Windows 2010 operating environment, word processing, spreadsheets, databases, and electronic animated presentations. Prerequisite: BCST 1010", "prerequisites": [ "BCST 1010" ], "program_ids": [ "centralgatech-001115" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BCST1050", "canonical_url": "/centralgatech/courses/bcst-1050", "markdown_url": "/centralgatech/courses/bcst-1050.md" }, { "id": "centralgatech-000452", "code": "BIOL 1111L", "title": "| BIOLOGY LAB I", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in BIOL 1111. The laboratory exercises for this course include chemical principles related to cells, cell structure and function, energy and metabolism, cell division, protein synthesis, genetics, and biotechnology. Prerequisite: Regular Admission Co-requisite: BIOL 1111", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL1111L", "canonical_url": "/centralgatech/courses/biol-1111l", "markdown_url": "/centralgatech/courses/biol-1111l.md" }, { "id": "centralgatech-000453", "code": "BIOL 1112L", "title": "| BIOLOGY LAB II", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL1112L", "canonical_url": "/centralgatech/courses/biol-1112l", "markdown_url": "/centralgatech/courses/biol-1112l.md" }, { "id": "centralgatech-000454", "code": "BIOL 2114L", "title": "| ANATOMY AND PHYSIOLOGY LAB II", "credits": null, "hours": null, "description": "(0-45-1) Selected laboratory exercises paralleling the topics in", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BIOL2114L", "canonical_url": "/centralgatech/courses/biol-2114l", "markdown_url": "/centralgatech/courses/biol-2114l.md" }, { "id": "centralgatech-000455", "code": "BMET 1231", "title": "| MEDICAL EQUIPMENT FUNCTION AND", "credits": null, "hours": null, "description": "OPERATION I (45-45-4) This course introduces the study of electromechanical systems currently in use throughout the health care field with an emphasis on typical biomedical instrumentation. Topics include monitors, ECG machines, intensive care units, coronary care units, operating room equipment, and telemetry systems.", "prerequisites": [], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BMET1231", "canonical_url": "/centralgatech/courses/bmet-1231", "markdown_url": "/centralgatech/courses/bmet-1231.md" }, { "id": "centralgatech-000456", "code": "BMET 2242", "title": "| MEDICAL EQUIPMENT FUNCTION AND", "credits": null, "hours": null, "description": "OPERATION II (45-45-4) This course continues the study of electromechanical systems currently in use throughout the health care field. Topics include: life support equipment, respiratory instrumentation, measuring brain parameters, medical ultrasound, electrosurgery units, and hemodialysis machines. Prerequisite: ALHS 1010 or ALHS 1011; BMET 1231", "prerequisites": [ "ALHS 1010", "ALHS 1011", "BMET 1231" ], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BMET2242", "canonical_url": "/centralgatech/courses/bmet-2242", "markdown_url": "/centralgatech/courses/bmet-2242.md" }, { "id": "centralgatech-000457", "code": "BRLL 1000", "title": "INTRODUCTION TO LITERARY BRAILLE", "credits": null, "hours": null, "description": "TRANSCRIPTION (30-60-4) This course introduces students to braille transcription and the role of the transcriber. Topics include introduction to braille, braille transcription methods, and the alphabet and numbers in braille form. This course introduces students to braille transcription and the role of the transcriber. Topics include introduction to braille, braille transcription methods, and the alphabet and numbers in braille form. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BRLL1000", "canonical_url": "/centralgatech/courses/brll-1000", "markdown_url": "/centralgatech/courses/brll-1000.md" }, { "id": "centralgatech-000458", "code": "BRLL 1010", "title": "LIBRARY OF CONGRESS BRAILLE", "credits": null, "hours": null, "description": "TRANSCRIBING (15-75-4) This course focuses on the production of braille materials. Topics include methods of braille transcription using translation equipment and software. Prerequisite: BRLL 1000 Co-requisite: BRLL 1020", "prerequisites": [], "program_ids": [ "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BRLL1010", "canonical_url": "/centralgatech/courses/brll-1010", "markdown_url": "/centralgatech/courses/brll-1010.md" }, { "id": "centralgatech-000459", "code": "BRLL 1020", "title": "TACTILE GRAPHICS", "credits": null, "hours": null, "description": "This course provides students an introduction to tactile graphics in braille transcription production. Topics include use of braille embossers and software; design considerations; production and duplication methods; and evaluation of the finished graphic. Prerequisite: BRLL 1000 Co-requisite: BRLL 1010 Biotechnology", "prerequisites": [], "program_ids": [ "centralgatech-001118" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BRLL1020", "canonical_url": "/centralgatech/courses/brll-1020", "markdown_url": "/centralgatech/courses/brll-1020.md" }, { "id": "centralgatech-000460", "code": "BTEC 1010", "title": "| INTRODUCTION TO BIOTECHNOLOGY", "credits": null, "hours": null, "description": "(30-0-2) Introduces students to biotechnology. Topics include an overview of biotechnology, the basics of cell biology, genetic engineering, manufacturing, and plant anatomy and tissue culture. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC1010", "canonical_url": "/centralgatech/courses/btec-1010", "markdown_url": "/centralgatech/courses/btec-1010.md" }, { "id": "centralgatech-000461", "code": "BTEC 2010", "title": "| BIOTECHNOLOGY MATH APPLICATIONS", "credits": null, "hours": null, "description": "(64-31-5) This course trains students on mathematical applications applicable to biotechnology. Topics include calculations involving concentration, dilution, solution preparation, cell growth, serial dilution, molarity and oligonucleotides. Prerequisite: MATH 1111", "prerequisites": [ "MATH 1111" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2010", "canonical_url": "/centralgatech/courses/btec-2010", "markdown_url": "/centralgatech/courses/btec-2010.md" }, { "id": "centralgatech-000462", "code": "BTEC 2100", "title": "| CELL CULTURE", "credits": null, "hours": null, "description": "Covers the culturing and maintenance of various cell types. Examples include culturing and maintenance of bacteria, yeast, animal and plant cells. Prerequisite: BIOL 2117", "prerequisites": [ "BIOL 2117" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2100", "canonical_url": "/centralgatech/courses/btec-2100", "markdown_url": "/centralgatech/courses/btec-2100.md" }, { "id": "centralgatech-000463", "code": "BTEC 2105", "title": "| ORGANIC AND BIOCHEMISTRY", "credits": null, "hours": null, "description": "Introduces students to organic and biochemistry. Topics include naming organic compounds, reactivities of organic functional groups, and the structure and function of biomolecules such as carbohydrates, lipids, proteins, nucleic acids and enzymes. Prerequisite: CHEM 1212", "prerequisites": [ "CHEM 1212" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2105", "canonical_url": "/centralgatech/courses/btec-2105", "markdown_url": "/centralgatech/courses/btec-2105.md" }, { "id": "centralgatech-000464", "code": "BTEC 2110", "title": "| BIOPROCESSING/PRODUCTION", "credits": null, "hours": null, "description": "Provides training on how biological products are produced and purified. Topics include fermentation, cell culture, product separation and product purification. Prerequisite: BTEC 2100, BIOL 2117", "prerequisites": [ "BTEC 2100", "BIOL 2117" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2110", "canonical_url": "/centralgatech/courses/btec-2110", "markdown_url": "/centralgatech/courses/btec-2110.md" }, { "id": "centralgatech-000465", "code": "BTEC 2150", "title": "| MOLECULAR BIOLOGY", "credits": null, "hours": null, "description": "This is an introductory molecular biology course. It includes introduction to cells and cell research with a molecular biology approach. It will include chapters in fundamental molecular biology and flow of genetic information. Prerequisite: BIOL 2117", "prerequisites": [ "BIOL 2117" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2150", "canonical_url": "/centralgatech/courses/btec-2150", "markdown_url": "/centralgatech/courses/btec-2150.md" }, { "id": "centralgatech-000466", "code": "BTEC 2200", "title": "| IMMUNOLOGY", "credits": null, "hours": null, "description": "This course provides students with a foundation in basic human immunology with emphasis on the use of immunology in research. Surveys of innate and acquired immunity, humoral and cell mediated immunity, gene expression associated with immunity and protein synthesis and structure. In addition, topics concerning specific immune disorders are covered. Laboratory topics emphasize the isolation of proteins, including precipitation techniques, chromatography, gel electrophoresis, dialysis, and immune techniques including western blotting and enzyme-linked immunosorbant assays; concentration calculations, making dilutions, solution make-up, good record keeping and laboratory safety are also emphasized. Prerequisite: BTEC 2100, BTEC 2105", "prerequisites": [ "BTEC 2100", "BTEC 2105" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2200", "canonical_url": "/centralgatech/courses/btec-2200", "markdown_url": "/centralgatech/courses/btec-2200.md" }, { "id": "centralgatech-000467", "code": "BTEC 2300", "title": "| ENVIRONMENTAL TECHNOLOGY", "credits": null, "hours": null, "description": "This course provides an overview of the environmental technology arena with emphasis on water supply, waste management and pollution control. Topics include pollution of air, water, and soil, pollution prevention, basic concepts of environmental technology, storm water management and wastewater treatment. Prerequisite: BTEC 2010", "prerequisites": [ "BTEC 2010" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BTEC2300", "canonical_url": "/centralgatech/courses/btec-2300", "markdown_url": "/centralgatech/courses/btec-2300.md" }, { "id": "centralgatech-000468", "code": "BUSN 1000", "title": "| COMPUTERS IN HEALTHCARE", "credits": null, "hours": null, "description": "Introduces the fundamental concepts, terminology, and operations necessary to use computers in a business healthcare setting. Emphasis is placed on familiarity with basic computer functions and computer use; the role of information technology in business healthcare decision- making; and legal, ethical, and privacy issues related to computer use in the business healthcare environment. Topics include an introduction to computer terminology, the Windows environment, Cloud computing, data security, Internet and email, word processing software, spreadsheet software, database software, and presentation software.", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001102", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1000", "canonical_url": "/centralgatech/courses/busn-1000", "markdown_url": "/centralgatech/courses/busn-1000.md" }, { "id": "centralgatech-000469", "code": "BUSN 1015", "title": "| INTRODUCTION TO HEALTHCARE", "credits": null, "hours": null, "description": "REIMBURSEMENT (45-0-3) This course is designed to increase efficiency and streamline administrative procedures for insurance coding and billing. Topics include documentation in the medical record, diagnostic code selections, types of insurance, Medicare compliance policies related to documentation and confidentiality, and HIPAA and other compliance regulations. Prerequisite: ALHS 1090", "prerequisites": [ "ALHS 1090" ], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1015", "canonical_url": "/centralgatech/courses/busn-1015", "markdown_url": "/centralgatech/courses/busn-1015.md" }, { "id": "centralgatech-000470", "code": "BUSN 1100", "title": "| INTRODUCTION TO KEYBOARDING", "credits": null, "hours": null, "description": "(15-60-3) This course introduces the touch system of keyboarding placing emphasis on correct techniques. Topics include: computer hardware, computer software, file management, learning the alphabetic keyboard, the numeric keyboard and keypad building speed and accuracy and proofreading. Students attain a minimum of 25 GWAM (gross words a minute) on 3-minute timings with no more than 3 errors.", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001059", "centralgatech-001101", "centralgatech-001106", "centralgatech-001167" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1100", "canonical_url": "/centralgatech/courses/busn-1100", "markdown_url": "/centralgatech/courses/busn-1100.md" }, { "id": "centralgatech-000471", "code": "BUSN 1180", "title": "| COMPUTER GRAPHICS AND DESIGN", "credits": null, "hours": null, "description": "(15-60-3) Introduces how to design and transmit electronic communications, create graphics on-line, and insert animation and sound to computer-generated charts graphs and diagrams. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1180", "canonical_url": "/centralgatech/courses/busn-1180", "markdown_url": "/centralgatech/courses/busn-1180.md" }, { "id": "centralgatech-000472", "code": "BUSN 1190", "title": "| DIGITAL TECHNOLOGIES IN BUSINESS", "credits": null, "hours": null, "description": "(15-30-2) Provides an overview of digital technology used for conducting business. Students will learn the application of business activities using various digital platforms. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1190", "canonical_url": "/centralgatech/courses/busn-1190", "markdown_url": "/centralgatech/courses/busn-1190.md" }, { "id": "centralgatech-000473", "code": "BUSN 1200", "title": "MACHINE TRANSCRIPTION", "credits": null, "hours": null, "description": "This course emphasizes transcribing mailable documents from dictation using word processing software. Topics include: equipment and supplies, maintenance and usage, work area ACADEMIC PROGRAMS management, transcription techniques, productivity, and accuracy proofreading and language arts skills. Prerequisite: BUSN 1440, COMP 1000, ENGL 1010", "prerequisites": [ "BUSN 1440", "COMP 1000", "ENGL 1010" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1200", "canonical_url": "/centralgatech/courses/busn-1200", "markdown_url": "/centralgatech/courses/busn-1200.md" }, { "id": "centralgatech-000474", "code": "BUSN 1210", "title": "| ELECTRONICS CALCULATORS", "credits": null, "hours": null, "description": "Develops skill in the use of electronic calculators to interpret, solve, and record results of various types of problems involving the four arithmetic processes. Topics include: machine parts and features, touch system techniques, and arithmetic applications.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1210", "canonical_url": "/centralgatech/courses/busn-1210", "markdown_url": "/centralgatech/courses/busn-1210.md" }, { "id": "centralgatech-000475", "code": "BUSN 1220", "title": "| TELEPHONE TRAINING", "credits": null, "hours": null, "description": "This course familiarizes the student with the proper use of current telephone technology to include equipment techniques and attributes.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1220", "canonical_url": "/centralgatech/courses/busn-1220", "markdown_url": "/centralgatech/courses/busn-1220.md" }, { "id": "centralgatech-000476", "code": "BUSN 1230", "title": "| LEGAL TERMINOLOGY", "credits": null, "hours": null, "description": "This course introduces the spelling, pronunciation, definition, and usage of basic legal terms. The course broadly covers general law terms as well as specialized legal terminology. Topics include: word origins, word building, abbreviations and symbols correct spelling, pronunciation and meanings of terminology related to the court system, contracts, family law, real estate, litigation, wills/probate, bankruptcy and other areas of the law.", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001117" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1230", "canonical_url": "/centralgatech/courses/busn-1230", "markdown_url": "/centralgatech/courses/busn-1230.md" }, { "id": "centralgatech-000477", "code": "BUSN 1240", "title": "| OFFICE PROCEDURES", "credits": null, "hours": null, "description": "Emphasizes essential skills required for the business office. Topics include: office protocol, time management, telecommunications and telephone techniques, office equipment, workplace mail, records management, travel/ meeting arrangements, electronic mail, and workplace documents. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001112", "centralgatech-001113", "centralgatech-001114", "centralgatech-001117" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1240", "canonical_url": "/centralgatech/courses/busn-1240", "markdown_url": "/centralgatech/courses/busn-1240.md" }, { "id": "centralgatech-000478", "code": "BUSN 1250", "title": "| RECORDS MANAGEMENT", "credits": null, "hours": null, "description": "This course introduces records management concepts for use in any office environment. Topics include: basic records management concepts, alphabetic numeric subject and geographic filing, records retention, transfer and disposition of records.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1250", "canonical_url": "/centralgatech/courses/busn-1250", "markdown_url": "/centralgatech/courses/busn-1250.md" }, { "id": "centralgatech-000479", "code": "BUSN 1310", "title": "| INTRODUCTION TO BUSINESS CULTURE", "credits": null, "hours": null, "description": "(45-0-3) This course provides skills and attitudes necessary to function effectively both professionally and interpersonally in the workplace. Topics include: health and wellness, exercise, stress time and money management, work ethics, wardrobe on the job, workplace communications; and business, entertainment, travel and international culture. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001106" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1310", "canonical_url": "/centralgatech/courses/busn-1310", "markdown_url": "/centralgatech/courses/busn-1310.md" }, { "id": "centralgatech-000480", "code": "BUSN 1320", "title": "| BUSINESS INTERACTION SKILLS", "credits": null, "hours": null, "description": "This course equips students with the tools to communicate and interact more effectively in person, in writing, and on the telephone with both internal and external customers. Participants also learn how to work in teams to create a collaborative environment for accomplishing goals. Topics include: language of business, communication skills, working with information, business writing, team and collaborative skills, and resolving interpersonal conflict.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1320", "canonical_url": "/centralgatech/courses/busn-1320", "markdown_url": "/centralgatech/courses/busn-1320.md" }, { "id": "centralgatech-000481", "code": "BUSN 1330", "title": "| PERSONAL EFFECTIVENESS", "credits": null, "hours": null, "description": "This course focuses on the skills needed to be effective in the corporate environment. Students learn the importance of effectively managing time, stress, and change as they relate to work behavior and quality of work. Topics include: time management, stress management, interview skills/job development, resume writing and managing change.", "prerequisites": [], "program_ids": [ "centralgatech-001034" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1330", "canonical_url": "/centralgatech/courses/busn-1330", "markdown_url": "/centralgatech/courses/busn-1330.md" }, { "id": "centralgatech-000482", "code": "BUSN 1340", "title": "| CUSTOMER SERVICE EFFECTIVENESS", "credits": null, "hours": null, "description": "(30-30-3) This course emphasizes the importance of customer service throughout all businesses. Topics include: customer service challenges and problem solving, strategies for successful customer service, effective communication and dealing with difficult customers, empowerment, motivation, and leadership, customer retention and satisfaction measurement, and excellence in customer service.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1340", "canonical_url": "/centralgatech/courses/busn-1340", "markdown_url": "/centralgatech/courses/busn-1340.md" }, { "id": "centralgatech-000483", "code": "BUSN 1410", "title": "| SPREADSHEET CONCEPTS AND", "credits": null, "hours": null, "description": "APPLICATIONS (30-60-4) This course covers the knowledge and skills required to use spreadsheet software through course demonstrations, laboratory exercises, and projects. Topics and assignments will include: spreadsheet concepts, creating and manipulating data, formatting data and content, creating and modifying formulas, presenting data visually, and collaborating and securing data. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001106", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1410", "canonical_url": "/centralgatech/courses/busn-1410", "markdown_url": "/centralgatech/courses/busn-1410.md" }, { "id": "centralgatech-000484", "code": "BUSN 1420", "title": "| DATABASE APPLICATIONS", "credits": null, "hours": null, "description": "This course covers the knowledge and skills required to use database management software through course demonstrations, laboratory exercises, and projects. Topics and assignments will include: database concepts, structuring databases, creating and formatting database elements, entering and modifying data, creating and modifying queries, presenting and sharing data, and managing and maintaining databases. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001106", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1420", "canonical_url": "/centralgatech/courses/busn-1420", "markdown_url": "/centralgatech/courses/busn-1420.md" }, { "id": "centralgatech-000485", "code": "BUSN 1450", "title": "| COMPUTER APPLICATIONS FOR THE", "credits": null, "hours": null, "description": "BUSINESS PROFESSIONAL (30-60-4) This course covers the basic skills required to use word processing, spreadsheet and database management software through course demonstrations, laboratory exercises and projects. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001112", "centralgatech-001113", "centralgatech-001114", "centralgatech-001122", "centralgatech-001123", "centralgatech-001124" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1450", "canonical_url": "/centralgatech/courses/busn-1450", "markdown_url": "/centralgatech/courses/busn-1450.md" }, { "id": "centralgatech-000486", "code": "BUSN 1470", "title": "| PROFESSIONAL COMMUNICATION SKILLS", "credits": null, "hours": null, "description": "(30-30-3) This course equips participants with the tools to communicate and interact more effectively in person and in writing. Participants learn how to work in teams to create a collaborative environment for accomplishing goals. This course consists of the following: language of business, communication skills, working with information, business writing, team and collaborative skills, and resolving interpersonal conflict. This course incorporates the use of presentation software throughout to support the mission of professional communication skill development. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001112", "centralgatech-001113", "centralgatech-001124" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1470", "canonical_url": "/centralgatech/courses/busn-1470", "markdown_url": "/centralgatech/courses/busn-1470.md" }, { "id": "centralgatech-000487", "code": "BUSN 1800", "title": "| INTRODUCTION TO HEALTHCARE ACCOUNTING", "credits": null, "hours": null, "description": "(45-0-3) Course emphasizes the fundamentals of accounting and finance theory to decisions in healthcare environments. Emphasis on management problems and policy issues regarding allocation of resources, payment systems, capital investments, and budgeting.", "prerequisites": [], "program_ids": [ "centralgatech-001101" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN1800", "canonical_url": "/centralgatech/courses/busn-1800", "markdown_url": "/centralgatech/courses/busn-1800.md" }, { "id": "centralgatech-000488", "code": "BUSN 2130", "title": "| EXPERT SPREADSHEET ANALYSIS", "credits": null, "hours": null, "description": "This course expands on basic spreadsheet software knowledge and skills. Topics will include: advanced workbook options and setting, applying custom formats and layouts, creating and applying advanced formulas and creating advanced charts and tables. This course is designed to prepare the student to take the related Microsoft Office Specialist certification exam. Prerequisite: BUSN 1450", "prerequisites": [ "BUSN 1450" ], "program_ids": [ "centralgatech-001112", "centralgatech-001113", "centralgatech-001122" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2130", "canonical_url": "/centralgatech/courses/busn-2130", "markdown_url": "/centralgatech/courses/busn-2130.md" }, { "id": "centralgatech-000489", "code": "BUSN 2150", "title": "| SOCIAL MEDIA AND ELECTRONIC", "credits": null, "hours": null, "description": "COMMUNICATION (30-30-3) Provides an overview of digital technology used for conducting business, such as, the fundamentals of communicating with others inside and outside the organization. Students will learn the application of business activities using various digital platforms. Emphasis is placed on Professional Social Media Conduct and Workplace Computer Security and Safety. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2150", "canonical_url": "/centralgatech/courses/busn-2150", "markdown_url": "/centralgatech/courses/busn-2150.md" }, { "id": "centralgatech-000490", "code": "BUSN 2160", "title": "| ELECTRONIC MAIL APPLICATIONS", "credits": null, "hours": null, "description": "(15-30-2) This course provides instruction in the fundamentals of communicating with others inside and outside the organization via a personal information management program. Emphasizes the concepts necessary for individuals and workgroups to organize, find, view, and share information via electronic communication channels. Topics include: internal and external communication, message management calendar management, navigation, contact and task management, and security and privacy. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2160", "canonical_url": "/centralgatech/courses/busn-2160", "markdown_url": "/centralgatech/courses/busn-2160.md" }, { "id": "centralgatech-000491", "code": "BUSN 2180", "title": "| SPEED AND ACCURACY KEYING", "credits": null, "hours": null, "description": "Further develops speed and accuracy through analysis of keying and prescribed practice drills. Topics include: building speed, accuracy, and straight-copy proofreading. Prerequisite: BUSN 1100 or the ability to key 25 GWAM on 3-minute timings with no more than 3 errors.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2180", "canonical_url": "/centralgatech/courses/busn-2180", "markdown_url": "/centralgatech/courses/busn-2180.md" }, { "id": "centralgatech-000492", "code": "BUSN 2210", "title": "| APPLIED OFFICE PROCEDURES", "credits": null, "hours": null, "description": "This course focuses on applying knowledge and skills learned in prior courses taken in the program. Topics include: communications skills, telecommunications skills, records management skills, office equipment/supplies, and integrated programs/applications. Serves as a capstone course. Prerequisite: BUSN 1240, BUSN 1400, BUSN 1410, BUSN Co-requisite: BUSN 2200 or ACCT 1100, BUSN 2190", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2210", "canonical_url": "/centralgatech/courses/busn-2210", "markdown_url": "/centralgatech/courses/busn-2210.md" }, { "id": "centralgatech-000493", "code": "BUSN 2220", "title": "| LEGAL ADMINISTRATIVE PROCEDURES", "credits": null, "hours": null, "description": "(15-60-3) Emphasizes essential skills required for the legal office. Topics include: legal terminology, preparation of legal documents and correspondence, ethics, and legal office tasks. Prerequisite: BUSN 1230 Co-requisite: BUSN 1440", "prerequisites": [], "program_ids": [ "centralgatech-001117" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2220", "canonical_url": "/centralgatech/courses/busn-2220", "markdown_url": "/centralgatech/courses/busn-2220.md" }, { "id": "centralgatech-000494", "code": "BUSN 2230", "title": "| OFFICE MANAGEMENT", "credits": null, "hours": null, "description": "This course provides students with an overview of management concepts, styles, and skills. Topics include: management styles, leadership traits, ergonomics/workflow, communication channels, business ethics, supervisory techniques, and job performance evaluation techniques. Prerequisite: BUSN 1240", "prerequisites": [ "BUSN 1240" ], "program_ids": [ "centralgatech-001105", "centralgatech-001106" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2230", "canonical_url": "/centralgatech/courses/busn-2230", "markdown_url": "/centralgatech/courses/busn-2230.md" }, { "id": "centralgatech-000495", "code": "BUSN 2240", "title": "| BUSINESS ADMINISTRATIVE ASSISTANT", "credits": null, "hours": null, "description": "INTERNSHIP I (0-180-4) Provides student work experience in a professional environment. Topics include: application of classroom knowledge and skills, work environment functions, and listening/following directions. Students will be under the supervision of the Business Technology program faculty and/or persons designated to coordinate work experience arrangements. Prerequisite: Must be in last semester of program. With advisor approval may take concurrently with last semester courses.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2240", "canonical_url": "/centralgatech/courses/busn-2240", "markdown_url": "/centralgatech/courses/busn-2240.md" }, { "id": "centralgatech-000496", "code": "BUSN 2250", "title": "| BUSINESS ADMINISTRATIVE ASSISTANT", "credits": null, "hours": null, "description": "INTERNSHIP II (0-270-6) Provides student work experience in a professional environment. Topics include: application of classroom knowledge and skills, work environment functions, and listening/following directions. Students will be under the supervision of the Business Technology program faculty and/or persons designated to coordinate work experience arrangements. Prerequisite: Must be in last semester of program. With advisor approval may take concurrently with last semester courses.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2250", "canonical_url": "/centralgatech/courses/busn-2250", "markdown_url": "/centralgatech/courses/busn-2250.md" }, { "id": "centralgatech-000497", "code": "BUSN 2290", "title": "| APPLIED BUSINESS TECHNOLOGY", "credits": null, "hours": null, "description": "3) This course focuses on applying knowledge and skills learned in prior courses taken in the program. Topics include communications skills, records management skills, office management skills and career readiness. This course serves as a capstone course. Prerequisite: BUSN 1240, BUSN 1460, BUSN 2130, BUSN", "prerequisites": [ "BUSN 1240", "BUSN 1460", "BUSN 2130" ], "program_ids": [ "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2290", "canonical_url": "/centralgatech/courses/busn-2290", "markdown_url": "/centralgatech/courses/busn-2290.md" }, { "id": "centralgatech-000498", "code": "BUSN 2320", "title": "| MEDICAL DOCUMENT PROCESSING/", "credits": null, "hours": null, "description": "TRANSCRIPTION (15-90-4) Provides experience in medical machine transcription working with the most frequently used medical reports. Topics include: equipment and supplies maintenance and usage, work area management, spelling, definitions, punctuation, processing/transcription speed and accuracy, resource utilization, and pronunciation. Prerequisite: BUSN 2300 or ALHS 1090 and ALHS 1010 or", "prerequisites": [ "BUSN 2300", "ALHS 1090", "ALHS 1010" ], "program_ids": [ "centralgatech-001101", "centralgatech-001102", "centralgatech-001105", "centralgatech-001121" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2320", "canonical_url": "/centralgatech/courses/busn-2320", "markdown_url": "/centralgatech/courses/busn-2320.md" }, { "id": "centralgatech-000499", "code": "BUSN 2340", "title": "| MEDICAL ADMINISTRATIVE PROCEDURES", "credits": null, "hours": null, "description": "(30-60-4) Emphasizes essential skills required for the medical office. Introduces the knowledge and skills of procedures for billing purposes. Introduces the basic concept of medical administrative assisting and its relationship to the other health fields. Emphasizes medical ethics, legal aspects of medicine, and the medical administrative assistant’s role as an agent of the physician. Provides the student with knowledge and the essentials of professional behavior. Topics include: introduction to medical administrative assisting procedures, medical regulations ethics, medical records management, scheduling appointments, health insurance, billing/ collection, work area management, resource utilization, and office equipment. Prerequisite: BUSN 2300 or ALHS 1090 and BUSN 2310 or", "prerequisites": [ "BUSN 2300", "ALHS 1090", "BUSN 2310" ], "program_ids": [ "centralgatech-001101", "centralgatech-001105", "centralgatech-001120" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2340", "canonical_url": "/centralgatech/courses/busn-2340", "markdown_url": "/centralgatech/courses/busn-2340.md" }, { "id": "centralgatech-000500", "code": "BUSN 2360", "title": "| ACUTE CARE MEDICAL TRANSCRIPTION", "credits": null, "hours": null, "description": "(30-60-4) This course helps develop a high level of speed and accuracy in the transcription of medical reports in an acute care setting. Topics include: equipment and supplies maintenance and usage, work area management, pronunciation, spelling, definitions, punctuation, typing speed and accuracy, and resource utilization. Prerequisite: BUSN 2300 or ALHS 1090 and BUSN 2310 or", "prerequisites": [ "BUSN 2300", "ALHS 1090", "BUSN 2310" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2360", "canonical_url": "/centralgatech/courses/busn-2360", "markdown_url": "/centralgatech/courses/busn-2360.md" }, { "id": "centralgatech-000501", "code": "BUSN 2380", "title": "| MEDICAL ADMINISTRATIVE ASSISTANT", "credits": null, "hours": null, "description": "INTERNSHIP I (0-180-4) Provides student work experience in a medical office environment. Topics include: application of classroom knowledge and skills, work environment functions, and listening/following directions. Students will be under the supervision of the Business Technology program faculty and/or persons designated to coordinate work experience arrangements. Prerequisite: Must be in last semester of program. With advisor approval may take concurrently with last semester courses.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2380", "canonical_url": "/centralgatech/courses/busn-2380", "markdown_url": "/centralgatech/courses/busn-2380.md" }, { "id": "centralgatech-000502", "code": "BUSN 2390", "title": "| MEDICAL ADMINISTRATIVE ASSISTANT", "credits": null, "hours": null, "description": "INTERNSHIP II (0-270-6) Provides student work experience in a medical office environment. Topics include: application of classroom knowledge and skills, work environment functions, and listening/following directions. Students will be under the supervision of the Business Technology program faculty and/or persons designated to coordinate work experience arrangements. Prerequisite: Must be in last semester of program. With advisor approval may take concurrently with last semester courses.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2390", "canonical_url": "/centralgatech/courses/busn-2390", "markdown_url": "/centralgatech/courses/busn-2390.md" }, { "id": "centralgatech-000503", "code": "BUSN 2400", "title": "| HEALTHCARE PROCEDURAL CODING", "credits": null, "hours": null, "description": "30-3) Provides the knowledge and skills to apply the coding of procedures for billing purposes using the Physician’s Current Procedural Terminology (CPT) resources and the Healthcare Common Procedure Coding System (HCPCS). Topics include: format of CPT/HCPCS manual, CPT/HCPCS coding guidelines, and coding using the CPT/HCPCS resources. Upon completion, students should be able to apply coding principles to correctly assign CPT/HCPCS codes and apply systems to optimize reimbursement. Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090 or", "prerequisites": [ "BUSN 1010", "BUSN 2300", "ALHS 1090" ], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2400", "canonical_url": "/centralgatech/courses/busn-2400", "markdown_url": "/centralgatech/courses/busn-2400.md" }, { "id": "centralgatech-000504", "code": "BUSN 2420", "title": "| ADVANCED MEDICAL CODING", "credits": null, "hours": null, "description": "This course is a continuance of CPT and ICD coding. Topics include: health records coding techniques, coding linkage and compliance, searching the job market, developing a resume, stress management, test-taking strategies, and reviewing for a coding certification exam. Prerequisites: BUSN 2400, BUSN 2410", "prerequisites": [ "BUSN 2400", "BUSN 2410" ], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2420", "canonical_url": "/centralgatech/courses/busn-2420", "markdown_url": "/centralgatech/courses/busn-2420.md" }, { "id": "centralgatech-000505", "code": "BUSN 2440", "title": "| HEALTHCARE LEADERSHIP AND", "credits": null, "hours": null, "description": "PROFESSIONAL EFFECTIVENESS (45-0-3) Emphasizes essential skills required for leadership and professional success in healthcare organizations. Introduces the functions, practices, and advanced interpersonal relationships, critical thinking, and problem solving. Provides the student with knowledge and the essentials of professional leadership behaviors. Topics include: introduction to the supervisory role, the volatile healthcare environment, the dual nature of supervisory roles, basic functions of management, delegation, empowerment, self- management, interviewing, recruitment, professionalism, decision making managing change, professional meetings, quality, productivity, teams, and continuing education. Corequisite: BUSN 2340", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2440", "canonical_url": "/centralgatech/courses/busn-2440", "markdown_url": "/centralgatech/courses/busn-2440.md" }, { "id": "centralgatech-000506", "code": "BUSN 2700", "title": "| INTRODUCTION TO HEALTH", "credits": null, "hours": null, "description": "INFORMATICS (45-0-3) Emphasizes essential beginning skills for introductory health informatics practice. This course presents the past, present, and future of this rapidly evolving discipline, and explore the critical issues and challenges within the field as well as potential applications, benefits, and opportunities for improving the management of healthcare through information technology. Topics include development of virtual and interactive healthcare through technology; interoperability, standardization, safety, and risks associated with the implementation of the electronic health record; emergence and adoption of new information technologies; and global perspective of trends and issues in the field. Students investigate the professional roles related to managing health information technology as well as ACADEMIC PROGRAMS organizations that promote health informatics. Students conduct in-depth investigations on a specific health informatics positions to learn the responsibilities, essential skills sets, and professional and educational requirements of the job. Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090 Corequisite: CIST 1001", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2700", "canonical_url": "/centralgatech/courses/busn-2700", "markdown_url": "/centralgatech/courses/busn-2700.md" }, { "id": "centralgatech-000507", "code": "BUSN 2720", "title": "| HEALTHCARE INFORMATION SYSTEMS", "credits": null, "hours": null, "description": "(45-0-3) This course emphasizes the importance of a healthcare information system being effectively designed in order to meet the needs of the users. The course discusses the need for knowledge to maintain the system for each step within the complex process. Exploration of the technical aspects of information systems management, including key issues of systems design and development as well as system support and maintenance are discussed. Topics include terminology, functions, standards, systems development life cycle approach, analysis of necessary steps in the life cycle, identification of appropriate systems technology and data standards, creation of requirements, evaluation of security, and accommodation of human factors in design and use, basics of information architecture, and systems infrastructure. Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090", "prerequisites": [ "BUSN 1010", "BUSN 2300", "ALHS 1090" ], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2720", "canonical_url": "/centralgatech/courses/busn-2720", "markdown_url": "/centralgatech/courses/busn-2720.md" }, { "id": "centralgatech-000508", "code": "BUSN 2750", "title": "| HEALTHCARE TECHNOLOGY", "credits": null, "hours": null, "description": "REGULATIONS (45-0-3) This course emphasizes the importance of technology in healthcare to improve quality, safety, and efficiency in the delivery of healthcare. Struggles and disparities of the healthcare industry are discussed in reference to healthcare informatics advances. Topics include management aspects of healthcare informatics, infrastructure, current trends current regulations policies, patient privacy, record-keeping, database management, and information sharing.", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2750", "canonical_url": "/centralgatech/courses/busn-2750", "markdown_url": "/centralgatech/courses/busn-2750.md" }, { "id": "centralgatech-000509", "code": "BUSN 2800", "title": "| PRACTICE MANAGEMENT", "credits": null, "hours": null, "description": "FUNDAMENTALS (45-0-3) Emphasizes essential skills required for the management of healthcare practices. Introduces the functions, practices, and advanced administrative skills. Emphasis is placed on management skills including practice management, personnel supervision, marketing, financial planning, and addressing health disparities. Topics include: introduction to healthcare management, management and motivation, organizational behavior, strategic planning, healthcare marketing, quality improvement basics, information technology, managing costs and revenues, managing healthcare professionals, addressing health disparities, and healthcare fraud and abuse. Prerequisite: BUSN 2340", "prerequisites": [ "BUSN 2340" ], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2800", "canonical_url": "/centralgatech/courses/busn-2800", "markdown_url": "/centralgatech/courses/busn-2800.md" }, { "id": "centralgatech-000510", "code": "BUSN 2810", "title": "| HEALTHCARE COMPLIANCE", "credits": null, "hours": null, "description": "This course covers how healthcare law and related regulations are formulated, and the impact of those laws on payers, providers, patients, and healthcare businesses. Emphasis is placed on legal compliance in the healthcare industry. Topics covered included in-depth coverage and analysis of implementation of the healthcare reform law, fraud and abuse laws, anti-kickback, false claims, Stark anti-referral provisions, Medicare and Medicaid, the Health Insurance Portability and Accountability Act of 1996 (HIPAA), the HITECH Act and related regulations, the Emergency Medical Treatment and Active Labor Act (EMTALA). Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090, ENGL 1010 or ENGL 1101", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2810", "canonical_url": "/centralgatech/courses/busn-2810", "markdown_url": "/centralgatech/courses/busn-2810.md" }, { "id": "centralgatech-000511", "code": "BUSN 2820", "title": "| HEALTHCARE PRACTICE LAW AND ETHICS", "credits": null, "hours": null, "description": "(45-0-3) Introduces the complex ethical, moral, and legal issues involved in providing healthcare services. Emphasis is placed on legal requirements of medical practices, professional relationships, professional liabilities, and medical practice liability. Provides the student with a working knowledge of current healthcare law and accepted ethical behavior. Prerequisites: BUSN 1010 or BUSN 2300 or ALHS 1090 or", "prerequisites": [ "BUSN 1010", "BUSN 2300", "ALHS 1090" ], "program_ids": [ "centralgatech-001101", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#BUSN2820", "canonical_url": "/centralgatech/courses/busn-2820", "markdown_url": "/centralgatech/courses/busn-2820.md" }, { "id": "centralgatech-000512", "code": "CARP 1000", "title": "| FUNDAMENTAL CARPENTRY SKILLS", "credits": null, "hours": null, "description": "30-3) Fundamental Carpentry Skills provides the basic carpentry instruction all other carpentry skills build upon. Topics include orientation to the trade, materials and fasteners, hand and power tools, drawings and specifications, building layout, and building foundations. Prerequisite: None", "prerequisites": [], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001038", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1000", "canonical_url": "/centralgatech/courses/carp-1000", "markdown_url": "/centralgatech/courses/carp-1000.md" }, { "id": "centralgatech-000513", "code": "CARP 1015", "title": "| STRUCTURAL FRAMING I", "credits": null, "hours": null, "description": "Structural Framing describes the layout and construction procedures for floor, wall, ceiling, and roof systems, including how to read and interpret construction drawings and specifications, and how to identify different types of framing systems, components, and system materials. It also covers how to estimate the amount of materials needed for an assembly and on some common alternative framing systems. Prerequisite: CARP 1000, COFC 1080", "prerequisites": [ "CARP 1000", "COFC 1080" ], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001038", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1015", "canonical_url": "/centralgatech/courses/carp-1015", "markdown_url": "/centralgatech/courses/carp-1015.md" }, { "id": "centralgatech-000514", "code": "CARP 1025", "title": "| INTERMEDIATE CARPENTRY TECHNIQUES", "credits": null, "hours": null, "description": "ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE (45-60-5) Intermediate Carpentry Techniques completes the “rough-in” phase of building a structure. This course includes building envelope systems, stair framing, roof coverings, thermal and moisture protection, exterior finishes, and reading commercial drawings. Prerequisite: CARP 1000, COFC 1080", "prerequisites": [ "CARP 1000", "COFC 1080" ], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1025", "canonical_url": "/centralgatech/courses/carp-1025", "markdown_url": "/centralgatech/courses/carp-1025.md" }, { "id": "centralgatech-000515", "code": "CARP 1055", "title": "| ADVANCED CARPENTRY II", "credits": null, "hours": null, "description": "Advanced Carpentry II contains the culmination of skills needed to be a journeyman carpenter. Topics in this course include advanced roof and wall systems, advanced stair systems, and crew leader skills. Prerequisite: CARP 1000, COFC 1080", "prerequisites": [ "CARP 1000", "COFC 1080" ], "program_ids": [ "centralgatech-001034", "centralgatech-001036", "centralgatech-001039" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1055", "canonical_url": "/centralgatech/courses/carp-1055", "markdown_url": "/centralgatech/courses/carp-1055.md" }, { "id": "centralgatech-000516", "code": "CARP 1070", "title": "| SITE LAYOUT, FOOTINGS, AND", "credits": null, "hours": null, "description": "FOUNDATIONS (30-30-3) Introduces the concepts and practices of basic site layout, footings, and foundation construction. Students will use layout equipment for on-site laboratory practice. Topics include: zoning restrictions and building codes, batter board installation, squaring methods, footings, plot plan interpretation, the nature of concrete, building layout, materials estimation, foundation types, foundation forms, and edge forms.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1070", "canonical_url": "/centralgatech/courses/carp-1070", "markdown_url": "/centralgatech/courses/carp-1070.md" }, { "id": "centralgatech-000517", "code": "CARP 1105", "title": "| FLOOR, WALL, AND STAIR FRAMING", "credits": null, "hours": null, "description": "60-4) This course provides instruction in framing materials and estimation and framing production of floors, walls, and stairs. Topics include estimation and computation procedures, rough layouts, and installation procedures.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1105", "canonical_url": "/centralgatech/courses/carp-1105", "markdown_url": "/centralgatech/courses/carp-1105.md" }, { "id": "centralgatech-000518", "code": "CARP 1110", "title": "| CEILING AND ROOF FRAMING", "credits": null, "hours": null, "description": "This course provides instruction in the theory and practical application of skills required to construct ceiling and roof framing. Topics include systems and materials identification, layout procedures, installation procedures, cost and materials estimation, and safety precautions.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1110", "canonical_url": "/centralgatech/courses/carp-1110", "markdown_url": "/centralgatech/courses/carp-1110.md" }, { "id": "centralgatech-000519", "code": "CARP 1112", "title": "| EXTERIOR FINISHES AND ROOF", "credits": null, "hours": null, "description": "COVERINGS (30-60-4) Introduces materials identification, estimation, and installation procedures for exterior finishes and roof covering, including window and door installation. Topics include: doors and windows, siding trim, roofing types, materials identification, materials estimation, and installation procedures.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001041", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CARP1112", "canonical_url": "/centralgatech/courses/carp-1112", "markdown_url": "/centralgatech/courses/carp-1112.md" }, { "id": "centralgatech-000520", "code": "CAVT 1002", "title": "| MEDICAL PHYSICS", "credits": null, "hours": null, "description": "In this course the student is introduced to theory of medical instrumentation and physics found in the cardiovascular sciences. Performance of laboratory procedure is used to reinforce understanding of biomedical applications of equipment and uses as well as proper technique in safety. Topics include: electrical circuit theory, hospital equipment safety and medical instruments and equipment. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1002", "canonical_url": "/centralgatech/courses/cavt-1002", "markdown_url": "/centralgatech/courses/cavt-1002.md" }, { "id": "centralgatech-000521", "code": "CAVT 1020", "title": "| CARDIAC CATHETERIZATON I", "credits": null, "hours": null, "description": "This course includes an intensive study of the role of the Cardiovascular Technology student in the various diagnostic invasive cardiac catheterization procedures such as right and left heart procedures, temporary pacemakers, Swan- Ganz catheters, and coronary angioplasty. This includes identification of angiographic images and data as well as basic principles, special techniques in cardiac catheterization, and interventional techniques. Additional topics include emergency life support, cardiac pharmacology, and cardiac pathology and advance cardiac life support. Co-requisite: CAVT 1021, CAVT 1080", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1020", "canonical_url": "/centralgatech/courses/cavt-1020", "markdown_url": "/centralgatech/courses/cavt-1020.md" }, { "id": "centralgatech-000522", "code": "CAVT 1030", "title": "| ELECTROPHYSIOLOGY AND CARDIAC", "credits": null, "hours": null, "description": "ANATOMY (15-60-3) This course introduces the concepts essential in the performance and interpretation of 12-lead EKG and heart sounds. As a study of the anatomy, physiology, structural relationships, and the pathophysiology of the human heart and vascular system, the course concentrates on specialized terminology, cardiac and vascular anatomy, and electrophysiology. Topics include: heart anatomy, circulatory system, heart electrical system, physical heart defects, electrocardiograph, preparation for ACADEMIC PROGRAMS various electrocardiographic examinations, physical principles and pathophysiology of heart sounds, exercise physiology, stress testing, Holter monitoring, cardiac pacemakers, and cardiac rehabilitation programs. Laboratory experience will be provided. Prerequisite: BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1030", "canonical_url": "/centralgatech/courses/cavt-1030", "markdown_url": "/centralgatech/courses/cavt-1030.md" }, { "id": "centralgatech-000523", "code": "CAVT 1080", "title": "| ADVANCED HEMODYNAMICS AND", "credits": null, "hours": null, "description": "CARDIAC PHYSIOLOGY (15-60-3) The student is introduced to various forms of invasive monitoring. Various forms of invasive access are studied, including right and left heart catherization, arterial line setups, and appropriate care. Emphasis is placed on the basics of hemodynamic monitoring and interpretation. Also provides an overview of cardiovascular physiology and pathophysiology. Topics include: hemodynamics, aseptic technique, infection control, biochemistry of the cardiac muscle, conduction system, electrocardiogram, pathophysiology of acquired diseases, embryological development, and pathophysiology of congenital diseases. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1080", "canonical_url": "/centralgatech/courses/cavt-1080", "markdown_url": "/centralgatech/courses/cavt-1080.md" }, { "id": "centralgatech-000524", "code": "CAVT 1090", "title": "| DRUG CALCULATIONS AND", "credits": null, "hours": null, "description": "ADMINISTRATION (15-30-2) This course uses basic mathematical concepts and includes basic drug administration and emphasizes critical thinking skills. Topics include: systems of measurement, calculating drug problems, resource materials usage, basic pharmacology, administering medications in a simulated clinical environment, principles of IV therapy techniques, and client education. Prerequisite: BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1090", "canonical_url": "/centralgatech/courses/cavt-1090", "markdown_url": "/centralgatech/courses/cavt-1090.md" }, { "id": "centralgatech-000525", "code": "CAVT 1100", "title": "| CARDIAC CATHETERIZATION", "credits": null, "hours": null, "description": "FUNDAMENTALS (15-60-3) This course provides an overview of cardiovascular invasive diagnosis and therapy and includes an introduction of the cardiac catheterization lab. Topics include: ex-ray therapy, safety, positioning, coronary arteriography, pharmacology, invasive cardiac measurements and calculations, and specialty procedures. Prerequisite: BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT1100", "canonical_url": "/centralgatech/courses/cavt-1100", "markdown_url": "/centralgatech/courses/cavt-1100.md" }, { "id": "centralgatech-000526", "code": "CAVT 2020", "title": "| CARDIAC CATHETERIZATION II", "credits": null, "hours": null, "description": "An intensive study of the role of the CV Technologist in the various Cardiac Catheterization procedures such as: right and left heart catheterization, temporary pacemakers, Swan-Ganz, and coronary angioplasty. Topics include: general principles of acid-base and blood gas collection, interpretation and analogies, cardiac surgery and peripheral vascular disease, basic principles of electrophysiology and pacemaker technology, congenital heart disease and corrective surgeries, and basic hemodynamic review. Lab experience will be provided. Prerequisite: CAVT 1020, CAVT 1021 Co-requisite: CAVT 2030", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT2020", "canonical_url": "/centralgatech/courses/cavt-2020", "markdown_url": "/centralgatech/courses/cavt-2020.md" }, { "id": "centralgatech-000527", "code": "CAVT 2030", "title": "| CARDIAC CATHETERIZATION CLINICAL II", "credits": null, "hours": null, "description": "(0-270-6) Provides hands-on experience in performing invasive cardiac catheterization procedures while being monitored by a registered preceptor. Topics include: policies and procedures class, ethical and legal behavior in the catheterization laboratory, scrubbing skills, monitoring skills, and advanced cardiac life support (ACLS) certification. Prerequisite: CAVT 1020, CAVT 1021 Co-requisite: CAVT 2020", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT2030", "canonical_url": "/centralgatech/courses/cavt-2030", "markdown_url": "/centralgatech/courses/cavt-2030.md" }, { "id": "centralgatech-000528", "code": "CAVT 2050", "title": "| CARDIAC CATHETERIZATION CLINICAL III", "credits": null, "hours": null, "description": "(0-495-11) This course provides a culminating clinical experience which allows students to analyze information and procedural instruction provided throughout the program. Offers an intensive study of the hands-on experience in the role of the cardiac catheterization technologist in advanced cardiovascular procedures related to the catheterization lab while being monitored by a registered preceptor with emphasis on continuing to develop skills in scrubbing, monitoring and circulating during diagnostic and interventional procedures. Topics include: professional conduct, infection control, scrubbing skills, monitoring skills and circulation skills. Prerequisite: CAVT 2020, CAVT 2030", "prerequisites": [ "CAVT 2020", "CAVT 2030" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CAVT2050", "canonical_url": "/centralgatech/courses/cavt-2050", "markdown_url": "/centralgatech/courses/cavt-2050.md" }, { "id": "centralgatech-000529", "code": "CWDS 1540", "title": "| WORKING IN THE WAREHOUSING", "credits": null, "hours": null, "description": "ENVIRONMENT (30-0-2) This course provides an introduction to the warehousing environment. Topics include distribution centers, business principles, plant safety, career success, work ethics, and managing change.", "prerequisites": [], "program_ids": [ "centralgatech-001139" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CWDS1540", "canonical_url": "/centralgatech/courses/cwds-1540", "markdown_url": "/centralgatech/courses/cwds-1540.md" }, { "id": "centralgatech-000530", "code": "CWDS 1560", "title": "| WAREHOUSING CORE AND WORKFORCE", "credits": null, "hours": null, "description": "SKILLS (30-0-2) This course provides an overview of the core and workforce skills needed to succeed in the warehouse industry. Topics include powered industrial trucks, processing hazardous materials, palletizing, protecting materials and merchandise, waste recovery, containment, communication, team work, problem solving, image and interviewing.", "prerequisites": [], "program_ids": [ "centralgatech-001139" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CWDS1560", "canonical_url": "/centralgatech/courses/cwds-1560", "markdown_url": "/centralgatech/courses/cwds-1560.md" }, { "id": "centralgatech-000531", "code": "CWDS 1580", "title": "| WAREHOUSING AND DISTRIBUTION", "credits": null, "hours": null, "description": "PROCESS (30-0-2) This course provides information on the warehousing and distribution processes used in the warehousing environment. Topics include key warehousing functions, measuring productivity, computational skills, and tools for excellence.", "prerequisites": [], "program_ids": [ "centralgatech-001139" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CWDS1580", "canonical_url": "/centralgatech/courses/cwds-1580", "markdown_url": "/centralgatech/courses/cwds-1580.md" }, { "id": "centralgatech-000532", "code": "CWDS 1600", "title": "| WAREHOUSING TECHNOLOGY SKILLS", "credits": null, "hours": null, "description": "(30-0-2) This course provides an overview and study of the technology used in the warehousing environment. Topics include data applications, scanners and data entry machines, handling systems, automation, and inventory management. A warehousing simulation and comprehensive assessment is also a part of this course.", "prerequisites": [], "program_ids": [ "centralgatech-001139" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CWDS1600", "canonical_url": "/centralgatech/courses/cwds-1600", "markdown_url": "/centralgatech/courses/cwds-1600.md" }, { "id": "centralgatech-000533", "code": "CHEM 1212L", "title": "| CHEMISTRY LAB II", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in CHEM 1212. The laboratory exercises for this course include equilibrium theory, kinetics, thermodynamics, solution chemistry, acid-base theory, and nuclear chemistry. Prerequisite: CHEM 1211, CHEM 1211L Co-requisite: CHEM 1212", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM1212L", "canonical_url": "/centralgatech/courses/chem-1212l", "markdown_url": "/centralgatech/courses/chem-1212l.md" }, { "id": "centralgatech-000534", "code": "CHEM 2211L", "title": "| ORGANIC CHEMISTRY I LAB", "credits": null, "hours": null, "description": "In this laboratory course, students perform experiments to illustrate the reactions, principles and techniques presented in Organic Chemistry I. Students gain experience in synthesis and techniques relating to isolation, purification and identification of organic compounds. Prerequisite: CHEM 1212, CHEM 1212L Computer Information Systems", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CHEM2211L", "canonical_url": "/centralgatech/courses/chem-2211l", "markdown_url": "/centralgatech/courses/chem-2211l.md" }, { "id": "centralgatech-000535", "code": "CIST 1001", "title": "| COMPUTER CONCEPTS", "credits": null, "hours": null, "description": "This course provides an overview of information systems, computers and technology. Topics include: information systems and technology terminology, computer history, data representation, data storage concepts, fundamentals of information processing, fundamentals of information, security, information technology ethics, fundamentals of hardware operation, fundamentals of networking, fundamentals of the internet, fundamentals of software design concepts, fundamentals of software, (system and application), system development methodology, computer number systems conversion (binary and hexadecimal), and mobile computing.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001101", "centralgatech-001125", "centralgatech-001126", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001148", "centralgatech-001149", "centralgatech-001150", "centralgatech-001151", "centralgatech-001157", "centralgatech-001160", "centralgatech-001161", "centralgatech-001162", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1001", "canonical_url": "/centralgatech/courses/cist-1001", "markdown_url": "/centralgatech/courses/cist-1001.md" }, { "id": "centralgatech-000536", "code": "CIST 1101", "title": "| WORKING WITH MICROSOFT WINDOWS", "credits": null, "hours": null, "description": "(15-60-3) Working with Microsoft Windows provides students with the interface concepts of Microsoft Windows software and the opportunity to develop basic computer skills. Topics include: getting started with Microsoft Windows, managing programs and files with Microsoft Windows, using Microsoft Windows applications, data transfer with Microsoft Windows, printing with Microsoft Windows, and customizing with Microsoft Windows.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001072", "centralgatech-001073", "centralgatech-001082", "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1101", "canonical_url": "/centralgatech/courses/cist-1101", "markdown_url": "/centralgatech/courses/cist-1101.md" }, { "id": "centralgatech-000537", "code": "CIST 1122", "title": "| HARDWARE INSTALLATION AND", "credits": null, "hours": null, "description": "MAINTENANCE (30-75-4) This course serves to provide students with the knowledge of the fundamentals of computer technology, networking, and security along with the skills required to identify hardware, peripheral, networking, and security components with an introduction to the fundamentals of installing and maintaining computers. Students will develop the skills to identify the basic functionality of the operating system, perform basic troubleshooting techniques, utilize proper safety procedures, and effectively interact with customers and peers. This course is designed to help prepare students for the CompTIA A+ certification examination. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001152", "centralgatech-001153", "centralgatech-001156", "centralgatech-001157", "centralgatech-001158", "centralgatech-001160", "centralgatech-001162", "centralgatech-001168" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1122", "canonical_url": "/centralgatech/courses/cist-1122", "markdown_url": "/centralgatech/courses/cist-1122.md" }, { "id": "centralgatech-000538", "code": "CIST 1135", "title": "| OPERATING SYSTEMS AND VIRTUAL/", "credits": null, "hours": null, "description": "CLOUD COMPUTING (30-60-4) This course provides an overview of modern operating systems and their use in home and small business environments. Activities will utilize the graphical user interface (GUI) and command line environment (CLI). Topics include using the modern virtual operating systems and cloud environments.", "prerequisites": [], "program_ids": [ "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001152", "centralgatech-001153", "centralgatech-001154", "centralgatech-001156", "centralgatech-001157", "centralgatech-001158", "centralgatech-001162", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1135", "canonical_url": "/centralgatech/courses/cist-1135", "markdown_url": "/centralgatech/courses/cist-1135.md" }, { "id": "centralgatech-000539", "code": "CIST 1306", "title": "| PROGRAMMING FOUNDATIONS - SWIFT", "credits": null, "hours": null, "description": "(30-30-3) Learn key computing concepts, building a solid foundation in programming with Swift. Learn about the impact of computing and apps on society, economies, and cultures while exploring iOS app development, including the app design process: brainstorming, planning, prototyping, and evaluating an app design of their own.", "prerequisites": [], "program_ids": [ "centralgatech-001125", "centralgatech-001126", "centralgatech-001150" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1306", "canonical_url": "/centralgatech/courses/cist-1306", "markdown_url": "/centralgatech/courses/cist-1306.md" }, { "id": "centralgatech-000540", "code": "CIST 1510", "title": "| WEB DEVELOPMENT", "credits": null, "hours": null, "description": "Explores the concepts of Hypertext Markup Language (HTML), Cascading Style Sheets (CSS), XML, and HTML following the current standards set by the World Wide Web Consortium (W3C) for developing inter-linking web pages that include graphical elements, hyperlinks, tables, forms, and image maps.", "prerequisites": [], "program_ids": [ "centralgatech-001112", "centralgatech-001124", "centralgatech-001125", "centralgatech-001126", "centralgatech-001144", "centralgatech-001150", "centralgatech-001151", "centralgatech-001163", "centralgatech-001164", "centralgatech-001170", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1510", "canonical_url": "/centralgatech/courses/cist-1510", "markdown_url": "/centralgatech/courses/cist-1510.md" }, { "id": "centralgatech-000541", "code": "CIST 1520", "title": "| SCRIPTING TECHNOLOGIES", "credits": null, "hours": null, "description": "Students learn how to use the features and structure of a client side scripting language, explore the features on server side scripting and develop professional web applications that include special effects, interactive, dynamic, validated, and secure forms. Prerequisite: CIST 1510", "prerequisites": [ "CIST 1510" ], "program_ids": [ "centralgatech-001150", "centralgatech-001151", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1520", "canonical_url": "/centralgatech/courses/cist-1520", "markdown_url": "/centralgatech/courses/cist-1520.md" }, { "id": "centralgatech-000542", "code": "CIST 1530", "title": "| WEB GRAPHICS", "credits": null, "hours": null, "description": "Students will explore how to use industry standard or open source graphics software programs to create Web ready images and Web pages. Topics include advanced image correction techniques and adjustments, typography and interpolation as well as conditional scripting statements and arrays. The course includes a final project that allows students to develop a Web page/site using the chosen software. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001150", "centralgatech-001151", "centralgatech-001163", "centralgatech-001170", "centralgatech-001171" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1530", "canonical_url": "/centralgatech/courses/cist-1530", "markdown_url": "/centralgatech/courses/cist-1530.md" }, { "id": "centralgatech-000543", "code": "CIST 1602", "title": "| SECURITY POLICIES AND PROCEDURES", "credits": null, "hours": null, "description": "(45-0-3) This course provides knowledge and experience to develop and maintain security policies and procedures. Students will explore the legal and ethical issues in information security and the various security layers: physical security, personnel security, operating systems, network, software, communication and database security. Students will develop an Information Security Policy and an Acceptable Use Policy.", "prerequisites": [], "program_ids": [ "centralgatech-001129", "centralgatech-001150", "centralgatech-001159", "centralgatech-001160" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST1602", "canonical_url": "/centralgatech/courses/cist-1602", "markdown_url": "/centralgatech/courses/cist-1602.md" }, { "id": "centralgatech-000544", "code": "CIST 2129", "title": "| COMPREHENSIVE DATABASE TECHNIQUES", "credits": null, "hours": null, "description": "(15-90-4) This course provides a study of databases beginning with introductory topics and progressing through advanced development techniques. Topics include advanced database concepts, advanced development techniques, data integration concepts, and troubleshooting and supporting databases.", "prerequisites": [], "program_ids": [ "centralgatech-001127", "centralgatech-001128" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2129", "canonical_url": "/centralgatech/courses/cist-2129", "markdown_url": "/centralgatech/courses/cist-2129.md" }, { "id": "centralgatech-000545", "code": "CIST 2301", "title": "| APPLICATION DEVELOPMENT IN SWIFT I", "credits": null, "hours": null, "description": "(30-60-4) Build fundamental iOS app development skills with Swift. Master the core concepts and practices that professional programmers use daily and build a basic fluency in Xcode source and UI editors. Create iOS apps that adhere to standard practices, including the use of stock UI elements, layout techniques, and common navigation interfaces. Explore app design by brainstorming, planning, prototyping, and evaluating an application Prerequisite: CIST 1306 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE", "prerequisites": [], "program_ids": [ "centralgatech-001125", "centralgatech-001135", "centralgatech-001136" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2301", "canonical_url": "/centralgatech/courses/cist-2301", "markdown_url": "/centralgatech/courses/cist-2301.md" }, { "id": "centralgatech-000546", "code": "CIST 2342", "title": "| C# PROGRAMMING II", "credits": null, "hours": null, "description": "This course is an intermediate course in C#.NET Programming. It is assumed that the students knows the C#.NET syntax as well as basic object oriented concepts. Intermediate C#.NET teaches client-server systems, n-tier development environments, relational databases, use of SQL to access data, the use of ADO.NET objects, methods and properties to access and udpate relational databases. Advanced features of C# windows programming are explored. Prerequisite: CIST 2341", "prerequisites": [ "CIST 2341" ], "program_ids": [ "centralgatech-001125" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2342", "canonical_url": "/centralgatech/courses/cist-2342", "markdown_url": "/centralgatech/courses/cist-2342.md" }, { "id": "centralgatech-000547", "code": "CIST 2361", "title": "| C++ PROGRAMMING I", "credits": null, "hours": null, "description": "Provides opportunity to gain a working knowledge of C++ programming. Includes creating, editing, executing, and debugging C++ programs of moderate difficulty. Topics include: basic C++ concepts, simple I/O and expressions, I/O and control statements, arrays, pointers, structures, managing data and developing programs. Prerequisite: CIST 1305", "prerequisites": [ "CIST 1305" ], "program_ids": [ "centralgatech-001063", "centralgatech-001125", "centralgatech-001135", "centralgatech-001136" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2361", "canonical_url": "/centralgatech/courses/cist-2361", "markdown_url": "/centralgatech/courses/cist-2361.md" }, { "id": "centralgatech-000548", "code": "CIST 2362", "title": "| C++ PROGRAMMING II", "credits": null, "hours": null, "description": "Develops skills for the programmer to write programs using the language of C++. Emphasis is placed on utilizing the added features of C++, which will be added to the skills mastered in Introduction to C++ Programming. Topics include: objects, classes, inheritance, overloading, polymorphism, streams, containers, and exceptions. Prerequisite: CIST 2361", "prerequisites": [ "CIST 2361" ], "program_ids": [ "centralgatech-001125" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2362", "canonical_url": "/centralgatech/courses/cist-2362", "markdown_url": "/centralgatech/courses/cist-2362.md" }, { "id": "centralgatech-000549", "code": "CIST 2381", "title": "| MOBILE APPLICATION DEVELOPMENT", "credits": null, "hours": null, "description": "(30-60-4) This course explores mobile guidelines, standards, and techniques. This course includes design and development techniques for multiple mobile devices, platforms, and operating systems. Students will develop mobile applications using state of practice development tools, languages and devices. Prerequisite: CIST 1305", "prerequisites": [ "CIST 1305" ], "program_ids": [ "centralgatech-001125", "centralgatech-001135", "centralgatech-001136", "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2381", "canonical_url": "/centralgatech/courses/cist-2381", "markdown_url": "/centralgatech/courses/cist-2381.md" }, { "id": "centralgatech-000550", "code": "CIST 2411", "title": "| MICROSOFT CLIENT", "credits": null, "hours": null, "description": "Provides the ability to implement, administrate, and troubleshoot Windows Professional Client as a desktop operating system in any network environment. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001166", "centralgatech-001168" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2411", "canonical_url": "/centralgatech/courses/cist-2411", "markdown_url": "/centralgatech/courses/cist-2411.md" }, { "id": "centralgatech-000551", "code": "CIST 2413", "title": "| MICROSOFT SERVER NETWORKING", "credits": null, "hours": null, "description": "(30-60-4) Provides students with knowledge and skills necessary to install, configure, manage, support and administer a Microsoft network infrastructure. Directory Services. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001135", "centralgatech-001136", "centralgatech-001166" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2413", "canonical_url": "/centralgatech/courses/cist-2413", "markdown_url": "/centralgatech/courses/cist-2413.md" }, { "id": "centralgatech-000552", "code": "CIST 2431", "title": "| UNIX/LINUX INTRODUCTION", "credits": null, "hours": null, "description": "This course introduces the UNIX/Linux operating system skills necessary to perform entry-level user functions. Topics include: history of UNIX/Linux, login and logout, the user environment, user password change, the file system, hierarchy tree, editors, file system commands as they relate to navigating the file system tree, UNIX/Linux manual help pages, using the UNIX/Linux graphical desktop, and command ACADEMIC PROGRAMS options. In addition, the student must be able to perform directory and file displaying, creation, deletion, redirection, copying, moving, linking files, wildcards, determining present working directory and changing directory locations. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2431", "canonical_url": "/centralgatech/courses/cist-2431", "markdown_url": "/centralgatech/courses/cist-2431.md" }, { "id": "centralgatech-000553", "code": "CIST 2433", "title": "| UNIX/LINUX ADVANCED SERVER", "credits": null, "hours": null, "description": "This course covers UNIX/Linux operating system advanced administration skills necessary to perform advanced administrative functions. Topics include: understanding UNIX/ Linux networking, managing network printing, configuring and troubleshooting TCP/IP on UNIX/Linux, configuring DHCP , DNS, a Web server, an FTP server, an E-mail server, and understanding NIS (yp) and NFS. Also, includes the following: understanding advanced security issues such as firewalls and NAT, using network commands, use of graphical system such as X Windows, sharing files and printers, and advanced shell programming. Prerequisite: CIST 2432", "prerequisites": [ "CIST 2432" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2433", "canonical_url": "/centralgatech/courses/cist-2433", "markdown_url": "/centralgatech/courses/cist-2433.md" }, { "id": "centralgatech-000554", "code": "CIST 2451", "title": "| INTRODUCTION TO NETWORKS - CISCO", "credits": null, "hours": null, "description": "(30-60-4) This course provides students with classroom and laboratory experience in current and emerging network technology. Topics include basics of communication, converged networks, OSI and TCP/IP network models, Application layer protocols, services, and applications, Transport layer protocols and services, Network layer addressing and routing concepts, IPv4 and IPv6, calculating IPv4 subnets, Data Link layer and the encapsulation process, Physical layer components and data encoding, Ethernet and network protocol analysis, network cabling, and basic network configuration. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001127", "centralgatech-001128", "centralgatech-001129", "centralgatech-001135", "centralgatech-001136", "centralgatech-001147", "centralgatech-001155", "centralgatech-001158", "centralgatech-001160", "centralgatech-001162", "centralgatech-001168", "centralgatech-001169" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2451", "canonical_url": "/centralgatech/courses/cist-2451", "markdown_url": "/centralgatech/courses/cist-2451.md" }, { "id": "centralgatech-000555", "code": "CIST 2455", "title": "| CISCO CCNA SECURITY", "credits": null, "hours": null, "description": "Cisco Networking Academy CCNA Security course provides a next step to build upon the concepts and skills acquired in the four Cisco Networking Academy CCNA courses. It is for individuals who want to enhance their CCNA-level skill set and help meet the growing demand for network security professionals. It covers network security principles, tools, and configuration practices to enhance network security. Students will acquire the skills needed to design, implement, and support network security.", "prerequisites": [], "program_ids": [ "centralgatech-001155" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2455", "canonical_url": "/centralgatech/courses/cist-2455", "markdown_url": "/centralgatech/courses/cist-2455.md" }, { "id": "centralgatech-000556", "code": "CIST 2480", "title": "| AWS CLOUD FOUNDATIONS", "credits": null, "hours": null, "description": "AWS Cloud Foundations course is intended for students who seek an overall understanding of cloud computing concepts, independent of specific technical roles. The course provides a detailed overview of cloud concepts, AWS core services, security, architecture, pricing, and support.", "prerequisites": [], "program_ids": [ "centralgatech-001154" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2480", "canonical_url": "/centralgatech/courses/cist-2480", "markdown_url": "/centralgatech/courses/cist-2480.md" }, { "id": "centralgatech-000557", "code": "CIST 2481", "title": "| AWS CLOUD ARCHITECTING", "credits": null, "hours": null, "description": "AWS Cloud Architecting covers the fundamentals of building IT infrastructure on AWS. The course is designed to teach solutions architects how to optimize their use of the AWS Cloud by understanding AWS services and how they fit into cloud-based solutions. Although architectural solutions can differ depending on the industry, type of application, and size of the business, this course emphasizes best practices for the AWS Cloud that apply to all of them. It also recommends various design patterns to help think through the process of architecting optimal IT solutions on AWS. Throughout the course, students will explore case studies that showcase how some AWS customers have designed their infrastructures and the strategies and services that they have implemented. Finally, this course provides opportunities for students to build a variety of infrastructures through a guided, hands-on approach. Prerequisites: CIST 2480", "prerequisites": [ "CIST 2480" ], "program_ids": [ "centralgatech-001154" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2481", "canonical_url": "/centralgatech/courses/cist-2481", "markdown_url": "/centralgatech/courses/cist-2481.md" }, { "id": "centralgatech-000558", "code": "CIST 2531", "title": "| WEB GRAPHICS II", "credits": null, "hours": null, "description": "Students will further explore how to use and industry standard or open source graphics software program to create Web ready images and Web pages. Topics include advanced image correction techniques and adjustments, typography and interpolation as well as conditional scripting statements and arrays. Prerequisite: CIST 1530", "prerequisites": [ "CIST 1530" ], "program_ids": [ "centralgatech-001150", "centralgatech-001151" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2531", "canonical_url": "/centralgatech/courses/cist-2531", "markdown_url": "/centralgatech/courses/cist-2531.md" }, { "id": "centralgatech-000559", "code": "CIST 2601", "title": "| IMPLEMENTING OPERATING SYSTEMS", "credits": null, "hours": null, "description": "SECURITY (30-60-4) This course will provide knowledge and the practical experience necessary to configure the most common server platforms. Lab exercises will provide students with experience of establishing operating systems security for the network environment. Prerequisite: CIST 1401 or CIST 2451; CIST 1601", "prerequisites": [ "CIST 1401", "CIST 2451", "CIST 1601" ], "program_ids": [ "centralgatech-001129", "centralgatech-001155", "centralgatech-001159" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2601", "canonical_url": "/centralgatech/courses/cist-2601", "markdown_url": "/centralgatech/courses/cist-2601.md" }, { "id": "centralgatech-000560", "code": "CIST 2602", "title": "| NETWORK SECURITY", "credits": null, "hours": null, "description": "This course provides knowledge and the practical experience necessary to evaluate, implement and manage secure information transferred over computer networks. Topics include network security, intrusion detection, types of attacks, methods off attacks, security devices, basics of cryptography and organizational security elements. Prerequisite: CIST 1401 or CIST 2451; CIST 1601", "prerequisites": [ "CIST 1401", "CIST 2451", "CIST 1601" ], "program_ids": [ "centralgatech-001129", "centralgatech-001155", "centralgatech-001159" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2602", "canonical_url": "/centralgatech/courses/cist-2602", "markdown_url": "/centralgatech/courses/cist-2602.md" }, { "id": "centralgatech-000561", "code": "CIST 2611", "title": "| NETWORK DEFENSE AND", "credits": null, "hours": null, "description": "COUNTERMEASURES (30-60-4) Students will learn how to plan, design, install and configure firewalls that will allow key services while maintaining security. This will include protecting the Internal IP services, configuring a firewall for remote access and managing a firewall. Prerequisite: CIST 1401 or CIST 2451; CIST 1601", "prerequisites": [ "CIST 1401", "CIST 2451", "CIST 1601" ], "program_ids": [ "centralgatech-001129", "centralgatech-001155", "centralgatech-001159" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2611", "canonical_url": "/centralgatech/courses/cist-2611", "markdown_url": "/centralgatech/courses/cist-2611.md" }, { "id": "centralgatech-000562", "code": "CIST 2612", "title": "| COMPUTER FORENSICS", "credits": null, "hours": null, "description": "This course examines the use of computers in the commission of crimes, collection, analysis and production of digital evidence. Students will use computer resources to explore basic computer forensic investigation techniques. Prerequisite: CIST 1122, CIST 1601", "prerequisites": [ "CIST 1122", "CIST 1601" ], "program_ids": [ "centralgatech-001129", "centralgatech-001155", "centralgatech-001159" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2612", "canonical_url": "/centralgatech/courses/cist-2612", "markdown_url": "/centralgatech/courses/cist-2612.md" }, { "id": "centralgatech-000563", "code": "CIST 2630", "title": "| COMPUTER FORENSICS & DATA", "credits": null, "hours": null, "description": "IDENTIFICATION (15-60-3) Provides a study of computer forensic techniques that will teach the techniques needed to harvest, identify, and analyze data while maintaining the legal and ethical standards needed to produce evidence that is admissible in court. Topics include: Computer Forensics, Ethical practices, Sterile Media, Computer Forensic Tools, Evidence Collection, Evidence Analysis, and Documentation. Prerequisite: CIST 1122, CIST 1130", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2630", "canonical_url": "/centralgatech/courses/cist-2630", "markdown_url": "/centralgatech/courses/cist-2630.md" }, { "id": "centralgatech-000564", "code": "CIST 2631", "title": "| CYBER CRIME TECHNOLOGY", "credits": null, "hours": null, "description": "This course prepares the student to search and investigate web based criminal activity into a computer system or a network. Identify, separate, and investigate web files and data that are suspicious. Through utilization of forensic tools, track route of travel, sender, and destination of suspected files and data. Harvest data from web browsers and email clients. Harvest data from cell phones and PDAs. Prepare suspected files and data for presentation at a legal proceeding. Prerequisite: CIST 1130, CIST 2630", "prerequisites": [ "CIST 1130", "CIST 2630" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2631", "canonical_url": "/centralgatech/courses/cist-2631", "markdown_url": "/centralgatech/courses/cist-2631.md" }, { "id": "centralgatech-000565", "code": "CIST 2632", "title": "| COMPUTER FORENSICS PROJECT", "credits": null, "hours": null, "description": "This is a capstone course project providing a realistic experience for students working in an environment to locate evidence of a crime within a computer system and prepare it for presentation at a trial or legal proceeding. Topics include: search warrants and chain/control of evidence, operating system tools and techniques, data recovery and safeguard, and presentation for trial/legal proceeding.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2632", "canonical_url": "/centralgatech/courses/cist-2632", "markdown_url": "/centralgatech/courses/cist-2632.md" }, { "id": "centralgatech-000566", "code": "CIST 2747", "title": "| PYTHON PROGRAMMING II", "credits": null, "hours": null, "description": "This course provides a study of the Python programming language to solve applications. Topics include: using classes to accomplish tasks such as accessing Databases, file access, and exception handling; Using flask to develop python interactions with web pages and exploring how Python is used in data analytics. Prerequisite: CIST 2742", "prerequisites": [ "CIST 2742" ], "program_ids": [ "centralgatech-001125" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CIST2747", "canonical_url": "/centralgatech/courses/cist-2747", "markdown_url": "/centralgatech/courses/cist-2747.md" }, { "id": "centralgatech-000567", "code": "COFC 1020", "title": "| PROFESSIONAL TOOL USE AND SAFETY", "credits": null, "hours": null, "description": "(15-60-3) This course provides instruction in the use of professional tools for the construction trades. Emphasis will be placed on the safe use of each tool discussed. Topics include layout and measuring tools, cutting tools, sawing tools, drilling and boring tools, finishing and fastening tools, general shop tool use, and job site setup.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001040", "centralgatech-001044", "centralgatech-001045" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COFC1020", "canonical_url": "/centralgatech/courses/cofc-1020", "markdown_url": "/centralgatech/courses/cofc-1020.md" }, { "id": "centralgatech-000568", "code": "COFC 1030", "title": "| MATERIALS AND FASTENERS", "credits": null, "hours": null, "description": "This course introduces the fundamental array of building materials used in residential and commercial construction. Topics include fasteners, wood products, concrete, brick and block, plumbing materials, finishing materials, manufactured products and an introduction to construction cost estimation.", "prerequisites": [], "program_ids": [ "centralgatech-001035", "centralgatech-001037", "centralgatech-001040" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COFC1030", "canonical_url": "/centralgatech/courses/cofc-1030", "markdown_url": "/centralgatech/courses/cofc-1030.md" }, { "id": "centralgatech-000569", "code": "COLL 1500", "title": "| STUDENT SUCCESS", "credits": null, "hours": null, "description": "This course is designed to provide tools to assist students to acquire skills necessary to achieve academic and professional success in their chosen occupational/technical program of study. Topics include: Getting off to a Good Start, Learning and Personality Styles, Time and Money Management, Study and Test Taking Skills, Stress Management and Wellness, Communication Skills, Career Exploration, Research Skills, College Campus Knowledge, Memory and Reading Skills, Presentation and Interview Skills, and Group Skills. Prerequisite: Adjusted minimum placement test scores. Introduction to Computer Literacy", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COLL1500", "canonical_url": "/centralgatech/courses/coll-1500", "markdown_url": "/centralgatech/courses/coll-1500.md" }, { "id": "centralgatech-000570", "code": "CMTT 2010", "title": "| RESIDENTIAL ESTIMATING REVIEW", "credits": null, "hours": null, "description": "This course introduces the complete estimating process from excavation to completed residence. Topics include the sequencing of construction, materials calculation, blueprint interpretation methods of construction, working with subcontractors, and final estimate assembly. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CMTT2010", "canonical_url": "/centralgatech/courses/cmtt-2010", "markdown_url": "/centralgatech/courses/cmtt-2010.md" }, { "id": "centralgatech-000571", "code": "CMTT 2050", "title": "| RESIDENTIAL CODE REVIEW", "credits": null, "hours": null, "description": "This course covers building codes as they apply to typical residential applications. Topics include international residential codes, working with building inspectors, permits and inspections, and site visits.", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CMTT2050", "canonical_url": "/centralgatech/courses/cmtt-2050", "markdown_url": "/centralgatech/courses/cmtt-2050.md" }, { "id": "centralgatech-000572", "code": "CMTT 2130", "title": "| COMPUTERIZED CONSTRUCTION", "credits": null, "hours": null, "description": "SCHEDULING (30-30-3) This course provides instruction in the use of application software for scheduling construction work. The use of contemporary construction scheduling and management software is emphasized. Topics include software overview, scheduling methods and requirements, and computerized scheduling of a simulated construction job.", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CMTT2130", "canonical_url": "/centralgatech/courses/cmtt-2130", "markdown_url": "/centralgatech/courses/cmtt-2130.md" }, { "id": "centralgatech-000573", "code": "CMTT 2170", "title": "| CONSTRUCTION CONTRACTING", "credits": null, "hours": null, "description": "This course provides an in depth study of the contractual relationship between the parties involved in building construction contracting. Topics include bonds, insurance, bidding, awarding, and subcontracting types and conditions. Construction Fundamentals Core", "prerequisites": [], "program_ids": [ "centralgatech-001044", "centralgatech-001045", "centralgatech-001046" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CMTT2170", "canonical_url": "/centralgatech/courses/cmtt-2170", "markdown_url": "/centralgatech/courses/cmtt-2170.md" }, { "id": "centralgatech-000574", "code": "COMM 1100", "title": "| HUMAN COMMUNICATION", "credits": null, "hours": null, "description": "Introduction to the fundamental components of the human communication process. The course provides a basic history of the communication discipline from ancient rhetorical roots through modern social sciences. The course emphasizes selected methods and practices in dyadic, small group, and oral presentational settings. Course content also covers communication models, as well as a survey of a variety of human communication modes and methods, including verbal, nonverbal, small group, interpersonal, mass, organizational, public, and intercultural communication. Cosmetology", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COMM1100", "canonical_url": "/centralgatech/courses/comm-1100", "markdown_url": "/centralgatech/courses/comm-1100.md" }, { "id": "centralgatech-000575", "code": "COSM 1000", "title": "| INTRODUCTION TO COSMETOLOGY", "credits": null, "hours": null, "description": "THEORY (60-0-4) Introduces fundamental theory and practices in the cosmetology profession. Emphasis will be placed on professional practices and safety. Topics include: state rules and regulations; state regulatory agency, image; bacteriology; decontamination and infection control, chemistry fundamentals, safety, Hazardous Duty Standards Act compliance, and anatomy and physiology. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1000", "canonical_url": "/centralgatech/courses/cosm-1000", "markdown_url": "/centralgatech/courses/cosm-1000.md" }, { "id": "centralgatech-000576", "code": "COSM 1010", "title": "| CHEMICAL TEXTURE SERVICES", "credits": null, "hours": null, "description": "Provides instruction in the chemistry and chemical reactions of permanent wave solutions and relaxers, application of permanent waves and relaxers. Precautions and special problems involved in applying permanent waves and relaxers will be emphasized. Topics include: permanent wave techniques, chemical relaxer techniques, chemistry, physical and chemical change, safety procedures, permanent wave and chemical relaxer application procedures, hair analysis, scalp analysis, permanent wave procedures (in an acceptable time frame), relaxer application (in an acceptable time frame), and Hazardous Duty Standards Act Compliance. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1010", "canonical_url": "/centralgatech/courses/cosm-1010", "markdown_url": "/centralgatech/courses/cosm-1010.md" }, { "id": "centralgatech-000577", "code": "COSM 1020", "title": "| HAIR CARE AND TREATMENT", "credits": null, "hours": null, "description": "Introduces the theory, procedures and products used in the care and treatment of the scalp and hair, disease and disorders and their treatments and the fundamental theory and skills required to shampoo, condition, and recondition the hair and scalp. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1020", "canonical_url": "/centralgatech/courses/cosm-1020", "markdown_url": "/centralgatech/courses/cosm-1020.md" }, { "id": "centralgatech-000578", "code": "COSM 1030", "title": "| HAIRCUTTING", "credits": null, "hours": null, "description": "Introduces the theory and skills necessary to apply haircutting techniques, advanced haircutting techniques, proper safety and decontamination precautions, hair design elements, cutting implements, head, hair and body analysis, and client consultation. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1030", "canonical_url": "/centralgatech/courses/cosm-1030", "markdown_url": "/centralgatech/courses/cosm-1030.md" }, { "id": "centralgatech-000579", "code": "COSM 1040", "title": "| STYLING", "credits": null, "hours": null, "description": "Introduces the fundamental theory and skills required to create shapings, pin curls, fingerwaves, roller placement, blow dry styling, thermal curling, thermal pressing, thermal waving, artificial hair and augmentation, and comb-outs. Laboratory training includes styling training on manikin. Topics include: braiding/intertwining hair, styling principles, pin curls, roller placement, fingerwaves, skip waves, ridge curls, blow dry styling, thermal curling, thermal pressing, thermal waving, artificial hair and augmentation, comb-outs, and safety precautions. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1040", "canonical_url": "/centralgatech/courses/cosm-1040", "markdown_url": "/centralgatech/courses/cosm-1040.md" }, { "id": "centralgatech-000580", "code": "COSM 1050", "title": "| HAIR COLOR", "credits": null, "hours": null, "description": "Introduces the theory and application of temporary, semipermanent, demipermanent-deposit only, and permanent hair coloring, hair lightening, and color removal products and application. Topics include: principles of color theory, hair structure, color, tone, classifications of color, hair lightening, color removal, application procedures, safety precautions, client consultation, product knowledge, haircolor challenges, corrective solutions, and special effects. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1050", "canonical_url": "/centralgatech/courses/cosm-1050", "markdown_url": "/centralgatech/courses/cosm-1050.md" }, { "id": "centralgatech-000581", "code": "COSM 1060", "title": "| FUNDAMENTALS OF SKIN CARE", "credits": null, "hours": null, "description": "This course provides a comprehensive study in care of the skin for theory and practical application. Emphasis will be placed on client consultation, safety precautions, skin conditions, product knowledge, basic facials, facial massage, corrective facial treatments, hair removal, and make-up application. Other topics in this course include advanced skin treatments in electrotherapy, light therapy, galvanic current, high frequency, and microdermabrasion. Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1060", "canonical_url": "/centralgatech/courses/cosm-1060", "markdown_url": "/centralgatech/courses/cosm-1060.md" }, { "id": "centralgatech-000582", "code": "COSM 1070", "title": "| NAIL CARE AND ADVANCED TECHNIQUES", "credits": null, "hours": null, "description": "(15-90-3) Provides training in manicuring, pedicuring and advanced nail techniques. Topics include: implements, products and supplies, hand and foot anatomy and Physiology, diseases and disorders, manicure techniques, pedicure techniques, nail product chemistry, safety precautions and practices, and advanced nail techniques (wraps/tips/acrylics). Co-requisite: COSM 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1070", "canonical_url": "/centralgatech/courses/cosm-1070", "markdown_url": "/centralgatech/courses/cosm-1070.md" }, { "id": "centralgatech-000583", "code": "COSM 1080", "title": "| PHYSICAL HAIR SERVICES PRACTICUM", "credits": null, "hours": null, "description": "(15-90-3) Provides laboratory experiences necessary for the development of skill levels required to be a competent cosmetologist. The allocation of time to the various phases of cosmetology is required by the Georgia State Board of Cosmetology. This course includes a portion of the required hours for licensure. Topics include: scalp, and hair treatments; haircutting; styling; dispensary; reception; safety precautions/decontamination; and Hazardous Duty Standards Act compliance. Prerequisite: COSM 1000, COSM 1020, COSM 1030, COSM", "prerequisites": [ "COSM 1000", "COSM 1020", "COSM 1030" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1080", "canonical_url": "/centralgatech/courses/cosm-1080", "markdown_url": "/centralgatech/courses/cosm-1080.md" }, { "id": "centralgatech-000584", "code": "COSM 1090", "title": "| HAIR SERVICES PRACTICUM I", "credits": null, "hours": null, "description": "Provides laboratory experiences necessary for the development of skill levels required to be a competent cosmetologist. The allocation of time to the various phases of cosmetology is prescribed by the Georgia State Board of Cosmetology. This course includes a portion of the hours required for licensure. Topics include: permanent waving and relaxers; hair color, foiling, lightening, hair and scalp treatments; haircutting; clipper design, precision cutting, styling; dispensary; reception; safety precautions/ ACADEMIC PROGRAMS decontamination; Hazardous Duty Standards Act compliance; product knowledge, customer service skills, client retention, State Board Rules and Regulations guidelines, and State Board foundation prep. Prerequisite: COSM 1000, COSM 1010, COSM 1020, COSM 1030, COSM 1040, COSM 1050", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1090", "canonical_url": "/centralgatech/courses/cosm-1090", "markdown_url": "/centralgatech/courses/cosm-1090.md" }, { "id": "centralgatech-000585", "code": "COSM 1100", "title": "| HAIR SERVICES PRACTICUM II", "credits": null, "hours": null, "description": "Provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The appropriate number of applications for completion of state board service credit requirements for this course may be met in a laboratory setting. Topics include: texture services; permanent waving and relaxers; hair color and lightening; skin, scalp, and hair treatment; haircutting; styling; dispensary; reception; safety precautions/decontamination; and Hazardous Duty Standards Act compliance. Co-requisite: COSM 1090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1100", "canonical_url": "/centralgatech/courses/cosm-1100", "markdown_url": "/centralgatech/courses/cosm-1100.md" }, { "id": "centralgatech-000586", "code": "COSM 1110", "title": "| HAIR SERVICES PRACTICUM III", "credits": null, "hours": null, "description": "Provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The requirements for this course may be met in a laboratory setting. Topics include: permanent waving and relaxers; hair color and lightening; scalp, and hair treatments; haircutting; dispensary; styling; reception; safety precautions/decontamination; Hazardous Duty Standards Act compliance; and state licensure preparation. Co-requisite: COSM 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1110", "canonical_url": "/centralgatech/courses/cosm-1110", "markdown_url": "/centralgatech/courses/cosm-1110.md" }, { "id": "centralgatech-000587", "code": "COSM 1115", "title": "| HAIR SERVICES PRACTICUM IV", "credits": null, "hours": null, "description": "This course provides experience necessary for professional development and completion of requirements for state licensure. Emphasis will be placed on the display of professional conduct and positive attitudes. The requirements for this course may be met in a laboratory setting. Topics include: permanent waving and relaxers; hair color and lightening; hair and scalp treatments; haircutting; dispensary; styling; reception; safety precautions/decontamination; Hazardous Duty Standards Act compliance; and state licensure preparation. Co-requisite: COSM 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#COSM1115", "canonical_url": "/centralgatech/courses/cosm-1115", "markdown_url": "/centralgatech/courses/cosm-1115.md" }, { "id": "centralgatech-000588", "code": "CRJU 1010", "title": "| INTRODUCTION TO CRIMINAL JUSTICE", "credits": null, "hours": null, "description": "(45-0-3) This course introduces the development and organization of the criminal justice system in the United States. Topics include: the American criminal justice system; constitutional limitations; organization of enforcement, adjudication, and corrections; and career opportunities and requirements.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1010", "canonical_url": "/centralgatech/courses/crju-1010", "markdown_url": "/centralgatech/courses/crju-1010.md" }, { "id": "centralgatech-000589", "code": "CRJU 1030", "title": "| CORRECTIONS", "credits": null, "hours": null, "description": "This course provides an analysis of all phases of the American correctional system and practices, including its history, procedures, and objectives. Topics include: history and evolution of correctional facilities; legal and administrative problems; institutional facilities and procedures; probation, parole, and prerelease programs; alternative sentencing; rehabilitation; community involvement; and staffing. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1030", "canonical_url": "/centralgatech/courses/crju-1030", "markdown_url": "/centralgatech/courses/crju-1030.md" }, { "id": "centralgatech-000590", "code": "CRJU 1043", "title": "| PROBATION AND PAROLE", "credits": null, "hours": null, "description": "This course will cover the history of both juvenile and adult probation as well as the history of parole. The probation and parole systems will be covered generally with a special emphasis on the Georgia systems and related laws. Topics include: history and philosophy of probation and parole; function of the probation and parole systems; Georgia law related to probation and parole; characteristics and roles of probation and parole officers; and special issues and programs of probation and parole. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1043", "canonical_url": "/centralgatech/courses/crju-1043", "markdown_url": "/centralgatech/courses/crju-1043.md" }, { "id": "centralgatech-000591", "code": "CRJU 1052", "title": "| CRIMINAL JUSTICE ADMINISTRATION", "credits": null, "hours": null, "description": "(45-0-3) This course explores the managerial aspects of effective and efficient police administration. Emphasis is directed towards increasing organizational skills and overcoming interdepartmental and inter-agency non-communication. Topics include: environmental management, human resources, and organizational concerns. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1052", "canonical_url": "/centralgatech/courses/crju-1052", "markdown_url": "/centralgatech/courses/crju-1052.md" }, { "id": "centralgatech-000592", "code": "CRJU 1062", "title": "| METHODS OF CRIMINAL INVESTIGATION", "credits": null, "hours": null, "description": "(45-0-3) This course presents the fundamentals of criminal investigation. The duties and responsibilities of the investigator both in field and in the courtroom are highlighted. Emphasis is placed on techniques commonly utilized by investigative personnel as well as the procedures used for investigating various crimes. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1062", "canonical_url": "/centralgatech/courses/crju-1062", "markdown_url": "/centralgatech/courses/crju-1062.md" }, { "id": "centralgatech-000593", "code": "CRJU 1065", "title": "| COMMUNITY-ORIENTED POLICING", "credits": null, "hours": null, "description": "(45-0-3) Presents the fundamentals for the community-oriented policing philosophy, including the comparison of traditional and community policing philosophies; law enforcement and community relationships; importance of political and public support and involvement; attitudinal changes involving the roles of police management, supervisors and line personnel; creation of partnerships with community organizations, businesses, private security, other governmental agencies, and special interest groups; and police problem-solving methodologies. Topics include: foundations of community- oriented policing, partnerships and problem-solving in community-oriented policing, and community-oriented policing projects and programs. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1065", "canonical_url": "/centralgatech/courses/crju-1065", "markdown_url": "/centralgatech/courses/crju-1065.md" }, { "id": "centralgatech-000594", "code": "CRJU 1068", "title": "| CRIMINAL LAW FOR CRIMINAL JUSTICE", "credits": null, "hours": null, "description": "(45-0-3) This course introduces criminal law in the United States, but emphasizes the current specific status of Georgia criminal law. The course will focus on the most current statutory contents of the Official Code of Georgia Annotated (O.C.G.A.) with primary emphasis on the criminal and traffic codes. Topics include: historic development of criminal law in the United States; statutory law, Georgia Code (O.C.G.A.) Title 16 - Crimes and Offenses; statutory law, Georgia Code (O.C.G.A.) Title 40 - Motor Vehicle and Traffic Offenses; and Supreme Court rulings that apply to criminal law. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1068", "canonical_url": "/centralgatech/courses/crju-1068", "markdown_url": "/centralgatech/courses/crju-1068.md" }, { "id": "centralgatech-000595", "code": "CRJU 1075", "title": "| REPORT WRITING", "credits": null, "hours": null, "description": "Explains and demonstrates the effectiveness of the entire criminal investigation process by the quality of notes reports, and accurate documentation. An examination of what goes into the preparation, content, elements, mechanics, and format of documenting the criminal investigation process. Topics include: Field notes, initial information, observations, evidence, victims, witnesses, property, neighborhood canvass, crime scene, laboratory analysis and results, investigative follow-up, suspect statements, and the characteristics essential to quality report writing. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1075", "canonical_url": "/centralgatech/courses/crju-1075", "markdown_url": "/centralgatech/courses/crju-1075.md" }, { "id": "centralgatech-000596", "code": "CRJU 1400", "title": "| ETHICS AND CULTURAL PERSPECTIVES", "credits": null, "hours": null, "description": "FOR CRIMINAL JUSTICE (45-0-3) This course provides an exploration ethics and cultural perspectives in criminal justice. In presenting ethics, both the individual perspective and the organizational standpoint will be examined. Four areas of ethical decision making opportunities are studied including: law enforcement ethics; correctional ethics; legal profession ethics; and policymaking ethics. The presentation of cultural perspectives is designed to aid law enforcement officers to better understand and communicate with members of other cultures with whom they come in contact in the line of duty. Topics include: defining and applying terms related to intercultural attitudes, role-play activities related to interculturalunderstanding, developing interpersonal/intercultural communication competence, and development of personal intercultural growth plan. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU1400", "canonical_url": "/centralgatech/courses/crju-1400", "markdown_url": "/centralgatech/courses/crju-1400.md" }, { "id": "centralgatech-000597", "code": "CRJU 2100", "title": "| CRIMINAL JUSTICE INTERNSHIP/", "credits": null, "hours": null, "description": "EXTERNSHIP (0-135-3) This course provides experiences necessary for further professional development and exposure to related agencies in the criminal justice field. The student will pursue an externship in a related agency supervised by the instructor. Topics include criminal justice theory applications. Prerequisite: Advisor approval", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2100", "canonical_url": "/centralgatech/courses/crju-2100", "markdown_url": "/centralgatech/courses/crju-2100.md" }, { "id": "centralgatech-000598", "code": "CRJU 2110", "title": "| HOMELAND SECURITY", "credits": null, "hours": null, "description": "The course provides an introduction to the principles of homeland security, roles and responsibilities of constituencies and implications for criminal justice fields. Topics include intelligence and warning, border and transportation security, domestic counterterrorism, protecting critical infrastructure, defending against catastrophic threats, and emergency preparedness and response. ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2110", "canonical_url": "/centralgatech/courses/crju-2110", "markdown_url": "/centralgatech/courses/crju-2110.md" }, { "id": "centralgatech-000599", "code": "CRJU 2201", "title": "| CRIMINAL COURTS", "credits": null, "hours": null, "description": "This course examines the historical context on the development, functions, and controversies in the courts system. Topics include: introduction to the courts; participants of a trial; courtroom processes; and the post-conviction process. Prerequisite: Program admission Commercial Truck Driving", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CRJU2201", "canonical_url": "/centralgatech/courses/crju-2201", "markdown_url": "/centralgatech/courses/crju-2201.md" }, { "id": "centralgatech-000600", "code": "CTDL 1010", "title": "| FUNDAMENTALS OF COMMERCIAL", "credits": null, "hours": null, "description": "DRIVING (45-0-3) This course introduces students to the transportation industry, federal and state regulations, records and forms, industrial relations, and other non-driving activities. This course provides an emphasis on safety that will continue throughout the program.", "prerequisites": [], "program_ids": [ "centralgatech-001042", "centralgatech-001043" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1010", "canonical_url": "/centralgatech/courses/ctdl-1010", "markdown_url": "/centralgatech/courses/ctdl-1010.md" }, { "id": "centralgatech-000601", "code": "CTDL 1022", "title": "| COMMERCIAL DRIVING INTERNSHIP I", "credits": null, "hours": null, "description": "(15-60-3) This course familiarizes students with truck instruments and controls and performing basic maneuvers required to drive safely in a controlled environment and on the driving range. Each student must demonstrate proficiency in performing range operations such as operating commercial motor vehicle (CMV) through clearance maneuvers, backing, turning, parallel parking and coupling/uncoupling as applicable for the vehicle class. Internship training will be facilitated by an employer, the training hours will be documented, and proficiency will be signed off by the college ELDT partner. Co-requisite: CTDL 1010", "prerequisites": [], "program_ids": [ "centralgatech-001042", "centralgatech-001043" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1022", "canonical_url": "/centralgatech/courses/ctdl-1022", "markdown_url": "/centralgatech/courses/ctdl-1022.md" }, { "id": "centralgatech-000602", "code": "CTDL 1032", "title": "| COMMERCIAL DRIVING INTERNSHIP II", "credits": null, "hours": null, "description": "(15-60-3) Advanced Operations develops a student’s driving skills under actual road conditions. These safe operating practices are integrated into the development of driving skills on the road. Each student must demonstrate proficiency in required behind-the-wheel (BTW) skills such as operating a commercial vehicle safely on public roads through a variety of maneuvers. Internship training will be facilitated by an employer, the training hours will be documented, and proficiency will be signed off by the college ELDT partner. Co-requisite: CTDL 1022", "prerequisites": [], "program_ids": [ "centralgatech-001042", "centralgatech-001043" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1032", "canonical_url": "/centralgatech/courses/ctdl-1032", "markdown_url": "/centralgatech/courses/ctdl-1032.md" }, { "id": "centralgatech-000603", "code": "CTDL 1035", "title": "| COMBINATION VEHICLE ADVANCED", "credits": null, "hours": null, "description": "OPERATIONS/AUTOMATIC RESTRICTION (30-30-3) Advanced Operations develops students’ driving skills under actual road conditions. The classroom part of the course stresses following safe operating practices. These safe operating practices are integrated into the development of driving skills on the road. Each student must demonstrate proficiency in required behind-the-wheel (BTW) skills such as operating a commercial vehicle safely on public roads through a variety of maneuvers. Co-requisite: CTDL 1021", "prerequisites": [], "program_ids": [ "centralgatech-001042" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CTDL1035", "canonical_url": "/centralgatech/courses/ctdl-1035", "markdown_url": "/centralgatech/courses/ctdl-1035.md" }, { "id": "centralgatech-000604", "code": "CUUL 1000", "title": "| FUNDAMENTALS OF CULINARY ARTS", "credits": null, "hours": null, "description": "(45-30-4) This course provides an overview of the professionalism in culinary arts, culinary opportunities, chef history, pride, and esprit de corps. Introduces principles and practices for food, supply, and equipment selection, procurement, receiving, storage, and distribution. Topics include: cuisine, food service organizations, career opportunities, food service styles, basic culinary management techniques, professionalism, culinary work ethics, quality factors, food tests, pricing procedures, cost determination and control, selection, procurement, receiving and distribution. Laboratory demonstration and student experimentation parallel class work.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1000", "canonical_url": "/centralgatech/courses/cuul-1000", "markdown_url": "/centralgatech/courses/cuul-1000.md" }, { "id": "centralgatech-000605", "code": "CUUL 1120", "title": "| PRINCIPLES OF COOKING", "credits": null, "hours": null, "description": "ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE This course introduces fundamental food preparation terms, concepts, and methods. Course content reflects American Culinary Federation Educational Institute apprenticeship training objectives. Topics include: weights and measures, conversions, basic cooking principles, methods of food preparation, recipe utilization, and nutrition. Laboratory demonstrations and student experimentation parallel class work. Co-requisite: CUUL 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1120", "canonical_url": "/centralgatech/courses/cuul-1120", "markdown_url": "/centralgatech/courses/cuul-1120.md" }, { "id": "centralgatech-000606", "code": "CUUL 1122", "title": "| FOUNDATIONS OF COOKING PRINCIPLES", "credits": null, "hours": null, "description": "(15-75-3) This course introduces fundamental food preparation terms, concepts, and methods. Course content reflects American Culinary Federation Educational Institute apprenticeship training objectives. Topics include: weights and measures, conversions, introduction to basic production mise-en place, classical knife cuts, basic stock preparation methods, mother sauce techniques and preparations, small sauces and derivatives from mother sauce, basic thickening agents, classical soup preparation methods, introduction methods of food preparation, recipe utilization, and nutrition. Laboratory demonstrations and student experimentation parallel class work. Co-requisite: CUUL 1000, CUUL 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1122", "canonical_url": "/centralgatech/courses/cuul-1122", "markdown_url": "/centralgatech/courses/cuul-1122.md" }, { "id": "centralgatech-000607", "code": "CUUL 1170", "title": "| INTRODUCTION TO CULINARY NUTRITION", "credits": null, "hours": null, "description": "(45-0-3) This course is an orientation for school nutrition employees that will introduce students to proper sanitation and food handling, equipment safety, first aid, meal pattern requirements, quantity food production, merchandising, communication, and basic nutrition knowledge. The course will help school nutrition employees develop skills that will result in improved nutrition programs and service to customers. Basic nutrition concepts will focus on Iron, Fats, Saturated Fat, and Cholesterol, Protein, Fiber, Sugar, Sodium, Calories, Calcium, Vitamin A and Vitamin C. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1170", "canonical_url": "/centralgatech/courses/cuul-1170", "markdown_url": "/centralgatech/courses/cuul-1170.md" }, { "id": "centralgatech-000608", "code": "CUUL 1370", "title": "| CULINARY NUTRITION AN MENU", "credits": null, "hours": null, "description": "DEVELOPMENT (15-75-3) This course emphasizes menu planning for all types of facilities, services, and special diets. Topics include: menu selection, menu development and pricing, nutritional foods, and organics. Laboratory demonstrations, student management and supervision parallel class work. Prerequisite: CUUL 1120 Dental Assisting", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CUUL1370", "canonical_url": "/centralgatech/courses/cuul-1370", "markdown_url": "/centralgatech/courses/cuul-1370.md" }, { "id": "centralgatech-000609", "code": "DENA 1030", "title": "| PREVENTIVE DENTISTRY", "credits": null, "hours": null, "description": "Introduces students to the area of preventive and public health dentistry. Topics include: patient education techniques; plaque control techniques; types and use of fluoride; diet analysis for caries control; and dietary considerations for the dental patient. Corequisite: DENA 1080, DENA 1340", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1030", "canonical_url": "/centralgatech/courses/dena-1030", "markdown_url": "/centralgatech/courses/dena-1030.md" }, { "id": "centralgatech-000610", "code": "DENA 1050", "title": "| MICROBIOLOGY AND INFECTION", "credits": null, "hours": null, "description": "CONTROL (30-30-3) Introduces fundamental microbiology and infection control techniques. Topics include: classification, structure, and behavior of pathogenic microbes; mode of disease transmission; body’s defense and immunity; infectious diseases; and infection control procedures in accordance with CDC recommendations and OSHA guidelines. Prerequisite: ENGL 1010, PSYC 1010, MATH 1012, ALHS 1040 Co-requisite: DENA 1080, DENA 1340", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1050", "canonical_url": "/centralgatech/courses/dena-1050", "markdown_url": "/centralgatech/courses/dena-1050.md" }, { "id": "centralgatech-000611", "code": "DENA 1070", "title": "| ORAL PATHOLOGY AND PHARMACOLOGY", "credits": null, "hours": null, "description": "(30-0-2) Focuses on the diseases affecting the oral cavity and pharmacology as it relates to dentistry. Topics include: identification of the disease process; signs/symptoms of oral diseases and systemic diseases with oral manifestations; developmental abnormalities of oral tissues; basic principles of pharmacology; drugs prescribed by the dental profession; drugs that may contraindicate dental treatment; and applied pharmacology (regulations, dosage, and applications). Prerequisite: DENA 1080, DENA 1340", "prerequisites": [ "DENA 1080", "DENA 1340" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1070", "canonical_url": "/centralgatech/courses/dena-1070", "markdown_url": "/centralgatech/courses/dena-1070.md" }, { "id": "centralgatech-000612", "code": "DENA 1080", "title": "| DENTAL ANATOMY", "credits": null, "hours": null, "description": "Focuses on normal head and neck anatomy and the development and functions of oral anatomy. Topics include: dental anatomy; oral histology; oral embryology; osteology of the skull; muscles of mastication and facial expression; temporomandibular joint, blood, lymphatic, nerve supply of the head; and salivary glands and related structures. Prerequisite: ENGL 1010, PSYC 1010, MATH 1012, ALHS Corequisite: DENA 1050, DENA 1340", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1080", "canonical_url": "/centralgatech/courses/dena-1080", "markdown_url": "/centralgatech/courses/dena-1080.md" }, { "id": "centralgatech-000613", "code": "DENA 1090", "title": "| DENTAL ASSISTING NATIONAL BOARD", "credits": null, "hours": null, "description": "EXAM PREPARATION (15-0-1) ACADEMIC PROGRAMS Reviews information concerning all didactic areas tested by the Dental Assisting National Board (DANB). Topics include: collecting and recording clinical data; dental radiography; chairside dental procedures; prevention of disease transmission; patient education and oral health management; office management procedures; and management of medical emergencies. Prerequisite: DENA 1350", "prerequisites": [ "DENA 1350" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1090", "canonical_url": "/centralgatech/courses/dena-1090", "markdown_url": "/centralgatech/courses/dena-1090.md" }, { "id": "centralgatech-000614", "code": "DENA 1340", "title": "| DENTAL ASSISTING I: GENERAL", "credits": null, "hours": null, "description": "CHAIRSIDE (45-90-6) Introduces students to ethics and jurisprudence for the dental assistant and to chair-side assisting with diagnostic and operative procedures. Topics include: ethics and jurisprudence in the dental office; four-handed dentistry techniques; clinical data collection techniques; introduction to operative dentistry; dental materials; and medical and dental emergencies. Prerequisite: ENGL 1010, PSYC 1010, MATH 1012, ALHS 1040 Corequisite: DENA 1050, DENA 1080", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1340", "canonical_url": "/centralgatech/courses/dena-1340", "markdown_url": "/centralgatech/courses/dena-1340.md" }, { "id": "centralgatech-000615", "code": "DENA 1350", "title": "| DENTAL ASSISTING II: DENTAL", "credits": null, "hours": null, "description": "SPECIALTIES AND EDDA SKILLS (60-90-7) Focuses on chairside assisting with dental specialty procedures. Topics include: prosthodontic procedures (fixed and removable); orthodontics; pediatric dentistry; periodontic procedures; oral and maxillofacial surgery procedures; endodontic procedures and expanded duties approved by law for performance by dental assistants in the state of Georgia. Students will pass a comprehensive examination and successfully perform all required clinical skills to receive EDDA certification. Prerequisite: DENA 1340", "prerequisites": [ "DENA 1340" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1350", "canonical_url": "/centralgatech/courses/dena-1350", "markdown_url": "/centralgatech/courses/dena-1350.md" }, { "id": "centralgatech-000616", "code": "DENA 1390", "title": "| DENTAL RADIOLOGY", "credits": null, "hours": null, "description": "After completion of the course the student will be able to provide radiation safety for patient and self, expose x-rays, process x-rays, and prepare dental films for the dental office. Topics include fundamentals of radiology and radiation safety; radiographic anatomy and interpretation; intraoral and extraoral radiographic techniques; and quality assurance techniques. Prerequisite: DENA 1080", "prerequisites": [ "DENA 1080" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1390", "canonical_url": "/centralgatech/courses/dena-1390", "markdown_url": "/centralgatech/courses/dena-1390.md" }, { "id": "centralgatech-000617", "code": "DENA 1400", "title": "| DENTAL PRACTICE MANAGEMENT", "credits": null, "hours": null, "description": "(30-0-2) Emphasizes procedures for office management in dental practices, utilizing basic computer skills and dental practice management software. Topics include: oral and written communication; records management; appointment control; dental insurance form preparation; accounting procedures; supply and inventory control; employability skills and basic computer skills. A computer lab provides basic skills in computer use and utilization of these skills to perform office procedures on a microcomputer. Prerequisite: DENA 1340", "prerequisites": [ "DENA 1340" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1400", "canonical_url": "/centralgatech/courses/dena-1400", "markdown_url": "/centralgatech/courses/dena-1400.md" }, { "id": "centralgatech-000618", "code": "DENA 1460", "title": "| DENTAL PRACTICUM I", "credits": null, "hours": null, "description": "Practicum focuses on infection control in the dental office and assisting with diagnostic and simple operative procedures. Topics include infection control procedures; clinical diagnostic procedures; and general dentistry procedures. Prerequisite: DENA 1050, DENA 1340 Corequisite: DENA 1350", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1460", "canonical_url": "/centralgatech/courses/dena-1460", "markdown_url": "/centralgatech/courses/dena-1460.md" }, { "id": "centralgatech-000619", "code": "DENA 1470", "title": "| DENTAL PRACTICUM II", "credits": null, "hours": null, "description": "Practicum focuses on demonstrating the progression of chairside assisting in general dental procedures and/or dental specialty procedures. Topics include advanced general dentistry and specialties. Prerequisite: DENA 1350", "prerequisites": [ "DENA 1350" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DENA1470", "canonical_url": "/centralgatech/courses/dena-1470", "markdown_url": "/centralgatech/courses/dena-1470.md" }, { "id": "centralgatech-000620", "code": "DFTG 1105", "title": "| 3D MECHANICAL MODELING", "credits": null, "hours": null, "description": "In the 3D Mechanical Modeling course, the student becomes acquainted with concepts of the software related to Parametric modeling for mechanical drafting. The student will develop the skills necessary to create 3D models and presentation/working drawings.", "prerequisites": [], "program_ids": [ "centralgatech-001066" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1105", "canonical_url": "/centralgatech/courses/dftg-1105", "markdown_url": "/centralgatech/courses/dftg-1105.md" }, { "id": "centralgatech-000621", "code": "DFTG 1107", "title": "| ADVANCED DIMENSIONING/SECTIONAL", "credits": null, "hours": null, "description": "VIEWS (30-60-4) Advanced Dimensioning/Sectional Views continues dimensioning skill development and introduces tools for precision measurement and sectional views.", "prerequisites": [], "program_ids": [ "centralgatech-001066" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1107", "canonical_url": "/centralgatech/courses/dftg-1107", "markdown_url": "/centralgatech/courses/dftg-1107.md" }, { "id": "centralgatech-000622", "code": "DFTG 1111", "title": "| FASTENERS", "credits": null, "hours": null, "description": "This course covers the basics of identifying fastening techniques, interpreting technical data, and creating working drawings. Topics include utilization of technical data, identifying thread types, graphic representation of threaded fasteners, utilization of other fastening techniques, welding symbol identification, and welding symbol usage in working drawings.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1111", "canonical_url": "/centralgatech/courses/dftg-1111", "markdown_url": "/centralgatech/courses/dftg-1111.md" }, { "id": "centralgatech-000623", "code": "DFTG 1125", "title": "| ARCHITECTURAL FUNDAMENTALS", "credits": null, "hours": null, "description": "(30-60-4) Introduces architectural fundamental principles and practices associated with architectural styles and drawing. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Fundamentals residential and commercial practices will be covered. Topics include: specifications and materials; architectural styles, construction drawing practices and procedures, dimensioning and scales.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG1125", "canonical_url": "/centralgatech/courses/dftg-1125", "markdown_url": "/centralgatech/courses/dftg-1125.md" }, { "id": "centralgatech-000624", "code": "DFTG 2020", "title": "| VISUALIZATION AND GRAPHICS", "credits": null, "hours": null, "description": "This course is an introduction to engineering and component visualization. Sketching, line drawing, computer assisted drafting, solid modeling including parametric modeling are practiced. Development of working drawings and requirements for drawing in a manufacturing and rapid pro- type environment are emphasized. Dental Hygiene", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DFTG2020", "canonical_url": "/centralgatech/courses/dftg-2020", "markdown_url": "/centralgatech/courses/dftg-2020.md" }, { "id": "centralgatech-000625", "code": "DHYG 1000", "title": "| TOOTH ANATOMY AND ROOT", "credits": null, "hours": null, "description": "MORPHOLOGY (30-0-2) Provides the student with a thorough knowledge of external and internal morphological characteristics of human primary and secondary dentition. Also introduces the student to various tooth identification systems, classifications of occlusion and dental anomalies. Topics include: oral cavity anatomy, dental terminology, external and internal tooth anatomy, tooth nomenclature and numbering systems, individual tooth and root morphology, occlusion and dental anomalies. Prerequisite: BIOL 2114, BIOL 2114L, BIOL 2117, BIOL 2117L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1000", "canonical_url": "/centralgatech/courses/dhyg-1000", "markdown_url": "/centralgatech/courses/dhyg-1000.md" }, { "id": "centralgatech-000626", "code": "DHYG 1010", "title": "| ORAL EMBRYOLOGY AND HISTOLOGY", "credits": null, "hours": null, "description": "(15-0-1) Focuses on the study of cells and tissues of the human body with emphasis on those tissues that compose the head, neck, and oral cavity. Topics include: cellular structure and organelles; histology of epithelium; histology of connective tissue; histology of muscle tissue; histology of nerve tissue; histology of oral mucosa and orofacial structures; embryological development of the head and neck; tooth development; and development of tooth supporting structures. Prerequisite: BIOL 2114, BIOL 2114L, BIOL 2117, BIOL 2117L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1010", "canonical_url": "/centralgatech/courses/dhyg-1010", "markdown_url": "/centralgatech/courses/dhyg-1010.md" }, { "id": "centralgatech-000627", "code": "DHYG 1020", "title": "| HEAD AND NECK ANATOMY", "credits": null, "hours": null, "description": "Focuses on anatomy of the head and neck. Emphasis is placed on those structures directly affected by the practice of dentistry. Topics include: terminology; anatomic landmarks; osteology of the skull; temporomandibular joint; muscles of mastication; muscles of facial expression; nervous system; blood supply of the head and neck; lymphatic system and immunology; endocrine and exocrine glands of the head and neck; nasal and paranasal sinuses; fascial spaces and the spread of dental infections; and anatomy concerning local anesthesia. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1020", "canonical_url": "/centralgatech/courses/dhyg-1020", "markdown_url": "/centralgatech/courses/dhyg-1020.md" }, { "id": "centralgatech-000628", "code": "DHYG 1030", "title": "| DENTAL MATERIALS", "credits": null, "hours": null, "description": "Focuses on the nature, qualities, composition and manipulation of materials used in dentistry. The primary goal of this course is to enhance the student’s ability to make clinical judgments regarding the use and care of dental materials based on how these materials react in the oral environment. Topics include: dental materials standards, dental materials properties, impression materials, gypsum products, mouthguards and whitening systems, dental bases, liners and cements, temporary restorations, classifications for restorative dentistry, direct restorative materials, indirect restorative materials, polishing procedures for dental restorations, removable dental prostheses, sealants, and implants. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1030", "canonical_url": "/centralgatech/courses/dhyg-1030", "markdown_url": "/centralgatech/courses/dhyg-1030.md" }, { "id": "centralgatech-000629", "code": "DHYG 1040", "title": "| PRECLINICAL DENTAL HYGIENE LECTURE", "credits": null, "hours": null, "description": "(30-0-2) Provides fundamental skills to be utilized in the delivery of optimum patient care by the dental hygienist. Topics include: patient assessment, instrumentation, charting, occlusion, caries, emergencies, ethics and professionalism, asepsis, and patient and clinician positioning. Prerequisite: Program admission Co-requisite: DHYG 1050", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1040", "canonical_url": "/centralgatech/courses/dhyg-1040", "markdown_url": "/centralgatech/courses/dhyg-1040.md" }, { "id": "centralgatech-000630", "code": "DHYG 1050", "title": "| PRECLINICAL DENTAL HYGIENE LAB", "credits": null, "hours": null, "description": "(0-90-2) Provides fundamental skills to be utilized in the delivery of optimum patient care by the dental hygienist. Topics include: asepsis, ethics and professionalism, emergencies, patient assessment, patient and clinician positioning, instrumentation, charting, occlusion and caries. Prerequisite: Program admission Co-requisite: DHYG 1040", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1050", "canonical_url": "/centralgatech/courses/dhyg-1050", "markdown_url": "/centralgatech/courses/dhyg-1050.md" }, { "id": "centralgatech-000631", "code": "DHYG 1070", "title": "| RADIOLOGY LECTURE", "credits": null, "hours": null, "description": "Emphasizes the application of radiology principles in the study of the teeth and their surrounding structures. Topics include: radiation physics principles; radiation biology; radiation safety; radiographic quality assurance; imaging theory; radiographic interpretation; radiographic need; legal issues of dental radiography; and digital radiography techniques and principles. Prerequisite: DHYG 1020 Co-requisite: DHYG 1090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1070", "canonical_url": "/centralgatech/courses/dhyg-1070", "markdown_url": "/centralgatech/courses/dhyg-1070.md" }, { "id": "centralgatech-000632", "code": "DHYG 1090", "title": "| RADIOLOGY LAB", "credits": null, "hours": null, "description": "Emphasizes the application of radiology principles in the study of the teeth and their surrounding structures. Topics include: radiation safety, radiographic quality assurance, imaging theory, radiographic interpretation, radiographic need, and digital radiography principles and techniques. Prerequisite: DHYG 1020 Co-requisite: DHYG 1090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1090", "canonical_url": "/centralgatech/courses/dhyg-1090", "markdown_url": "/centralgatech/courses/dhyg-1090.md" }, { "id": "centralgatech-000633", "code": "DHYG 1110", "title": "| CLINICAL DENTAL HYGIENE I LECTURE", "credits": null, "hours": null, "description": "(30-0-2) Continues the development of knowledge in patient care. Topics include: prevention, instrumentation, patient management, dental appliances, and treatment planning. Prerequisite: DHYG 1040 Co-requisite: DHYG 1111", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1110", "canonical_url": "/centralgatech/courses/dhyg-1110", "markdown_url": "/centralgatech/courses/dhyg-1110.md" }, { "id": "centralgatech-000634", "code": "DHYG 1111", "title": "| CLINICAL DENTAL HYGIENE I LAB", "credits": null, "hours": null, "description": "Continues the development of knowledge in patient care. Topics include: prevention, instrumentation, patient management, dental appliances, treatment planning, and applied techniques. Prerequisite: DHYG 1050 Co-requisite: DHYG 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1111", "canonical_url": "/centralgatech/courses/dhyg-1111", "markdown_url": "/centralgatech/courses/dhyg-1111.md" }, { "id": "centralgatech-000635", "code": "DHYG 1206", "title": "| PHARMACOLOGY AND PAIN CONTROL", "credits": null, "hours": null, "description": "(45-0-3) Introduces principles of basic pharmacology as they pertain to the practice of dentistry and dental hygiene. Emphasizes actions and reactions of medications commonly used in the dental office or taken by dental patients. Topics include: pharmaceutical referencing; legal and ethical considerations; ACADEMIC PROGRAMS drug effects; contraindications; drug related emergencies; dental related anesthesia; and pain control. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG1206", "canonical_url": "/centralgatech/courses/dhyg-1206", "markdown_url": "/centralgatech/courses/dhyg-1206.md" }, { "id": "centralgatech-000636", "code": "DHYG 2010", "title": "| CLINICAL DENTAL HYGIENE II LECTURE", "credits": null, "hours": null, "description": "(30-0-2) Continues the development of student knowledge in treating patients and preventing oral disease. Topics include: instrument sharpening; patient assessment; antimicrobial use; pulp vitality testing; treatment of hypersensitivity; whitening; implant care; tobacco cessation; pit and fissure sealants, scaling, debridement and root planing; ultrasonics and air polishing and dietary analysis. Prerequisite: DHYG 1070, DHYG 1110 Co-requisite: DHYG 2020", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2010", "canonical_url": "/centralgatech/courses/dhyg-2010", "markdown_url": "/centralgatech/courses/dhyg-2010.md" }, { "id": "centralgatech-000637", "code": "DHYG 2020", "title": "| CLINICAL DENTAL HYGIENE II LAB", "credits": null, "hours": null, "description": "Continues the development of student knowledge in treating patients and preventing oral disease. Topics include: instrument sharpening; patient assessment; antimicrobial use; pulp vitality testing; treatment of hypersensitivity; whitening; implant care; tobacco cessation; pit and fissure sealants; scaling, debridement and root planing; ultrasonics and air polishing; dietary analysis, and applied techniques. Prerequisite: DHYG 1070, DHYG 1090, DHYG 1111 Co-requisite: DHYG 2010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2020", "canonical_url": "/centralgatech/courses/dhyg-2020", "markdown_url": "/centralgatech/courses/dhyg-2020.md" }, { "id": "centralgatech-000638", "code": "DHYG 2050", "title": "| GENERAL AND ORAL PATHOLOGY /", "credits": null, "hours": null, "description": "PATHOPHYSIOLOGY (45-0-3) Introduces pathology as a specialty of dentistry and includes the etiology, pathogenesis and recognition of various pathological conditions. Emphasis is placed on oral and paraoral pathology and systemic conditions affecting the head and neck. Topics include: terminology and biopsy procedures; inflammation, repair, and regeneration; soft tissue and dental anomalies; pathogenesis of caries and pulpal pathology; cysts and tumors of the head and neck; systemic conditions that affect the oral structures; infectious diseases; diseases of the salivary glands; diseases of bone; blood dyscrasias; vesiculo-erosive and autoimmune diseases; and genetic diseases and syndromes of the head and neck. Prerequisite: DHYG 1010, DHYG 1020", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2050", "canonical_url": "/centralgatech/courses/dhyg-2050", "markdown_url": "/centralgatech/courses/dhyg-2050.md" }, { "id": "centralgatech-000639", "code": "DHYG 2070", "title": "| COMMUNITY DENTAL HEALTH", "credits": null, "hours": null, "description": "Provides students with a broad understanding of the healthcare system and an objective view of the significant social, political, psychological and economic forces directing the system. Prepares students to promote oral health and prevent oral disease in a community, by meeting specific dental health needs of community groups. Topics include: epidemiology; community dental care assessment; community dental care provision; preventive counseling for groups; group oral health education; terminology; dental care systems; biostatistics; and concepts of dental research. Prerequisite: DHYG 1110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2070", "canonical_url": "/centralgatech/courses/dhyg-2070", "markdown_url": "/centralgatech/courses/dhyg-2070.md" }, { "id": "centralgatech-000640", "code": "DHYG 2080", "title": "| CLINICAL DENTAL HYGIENE III LECTURE", "credits": null, "hours": null, "description": "(30-0-2) Continues the development of student knowledge necessary for treatment and prevention of oral diseases. Topics include: treatment of patients with special needs. Prerequisite: DHYG 2010 Co-requisite: DHYG 2090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2080", "canonical_url": "/centralgatech/courses/dhyg-2080", "markdown_url": "/centralgatech/courses/dhyg-2080.md" }, { "id": "centralgatech-000641", "code": "DHYG 2090", "title": "| CLINICAL DENTAL HYGIENE III LAB", "credits": null, "hours": null, "description": "(0-180-4) Continues the development of student skills necessary for treatment and prevention of oral disease. Topics include: special needs patients and applied techniques. Prerequisite: DHYG 2020 Co-requisite: DHYG 2080", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2090", "canonical_url": "/centralgatech/courses/dhyg-2090", "markdown_url": "/centralgatech/courses/dhyg-2090.md" }, { "id": "centralgatech-000642", "code": "DHYG 2130", "title": "| CLINICAL DENTAL HYGIENE IV LECTURE", "credits": null, "hours": null, "description": "(30-0-2) Focuses on the dental hygiene field and presents the fundamental concepts and principles necessary for successful participation in the dental profession. Topics include: employability skills; State of Georgia Dental Practice Act; office management; expanded duties; legal aspects; ethics; dental hygiene practice settings; and dentistry and dental hygiene regulation. Prerequisite: DHYG 2080 Co-requisite: DHYG 2140", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2130", "canonical_url": "/centralgatech/courses/dhyg-2130", "markdown_url": "/centralgatech/courses/dhyg-2130.md" }, { "id": "centralgatech-000643", "code": "DHYG 2140", "title": "| CLINICAL DENTAL HYGIENE IV LAB", "credits": null, "hours": null, "description": "(0-180-4) Continues the development of student skills necessary for treatment and prevention of oral disease. Topics include: applied techniques and time management. Prerequisite: DHYG 2090 Co-requisite: DHYG 2130", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DHYG2140", "canonical_url": "/centralgatech/courses/dhyg-2140", "markdown_url": "/centralgatech/courses/dhyg-2140.md" }, { "id": "centralgatech-000644", "code": "DIET 1011", "title": "DIESEL ELECTRICAL AND ELECTRONIC", "credits": null, "hours": null, "description": "SYSTEMS I (23-93-4) This course introduces students to diesel electrical and electronic systems used on medium/heavy duty trucks and heavy equipment. Topics include: general electrical systems diagnosis; battery diagnosis and repair; starting system diagnosis and repair; and basic lighting diagnosis and repair. Co-requisite: DIET 1000", "prerequisites": [], "program_ids": [ "centralgatech-001047", "centralgatech-001048" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1011", "canonical_url": "/centralgatech/courses/diet-1011", "markdown_url": "/centralgatech/courses/diet-1011.md" }, { "id": "centralgatech-000645", "code": "DIET 1012", "title": "DIESEL ELECTRICAL AND ELECTRONIC", "credits": null, "hours": null, "description": "SYSTEMS II (14-80-3) This course continues the study of electrical and electronic systems used on medium/heavy duty trucks and heavy equipment. Topics include: advanced lighting diagnosis; charging system diagnosis and repair; gauges and warning devices; and related electrical systems and diagnosis. Co-requisite: DIET 1011", "prerequisites": [], "program_ids": [ "centralgatech-001047", "centralgatech-001048" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1012", "canonical_url": "/centralgatech/courses/diet-1012", "markdown_url": "/centralgatech/courses/diet-1012.md" }, { "id": "centralgatech-000646", "code": "DIET 1020", "title": "| PREVENTATIVE MAINTENANCE", "credits": null, "hours": null, "description": "This course introduces preventive maintenance procedures pertaining to medium/heavy duty trucks and heavy equipment. Topics include: engine systems; cab and hood; heating, ventilation and air conditioning (HVAC); electrical and electronics; frame and chassis. Co-requisite: DIET 1010", "prerequisites": [], "program_ids": [ "centralgatech-001050" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1020", "canonical_url": "/centralgatech/courses/diet-1020", "markdown_url": "/centralgatech/courses/diet-1020.md" }, { "id": "centralgatech-000647", "code": "DIET 1031", "title": "| DIESEL ENGINE REPAIR", "credits": null, "hours": null, "description": "This course introduces diesel engines used in medium/heavy duty trucks and heavy equipment. Topics include: general engine diagnosis; cylinder head and valve trains; engine block; engine lubrication systems; basic fuel system diagnosis; and engine brakes. Using and interpreting measuring equipment is highly emphasized. Co-requisite: DIET 1010", "prerequisites": [], "program_ids": [ "centralgatech-001048" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1031", "canonical_url": "/centralgatech/courses/diet-1031", "markdown_url": "/centralgatech/courses/diet-1031.md" }, { "id": "centralgatech-000648", "code": "DIET 1032", "title": "| DIESEL ENGINE SUPPORT SYSTEMS", "credits": null, "hours": null, "description": "3) This course introduces the remaining diesel engine support systems used in medium/heavy duty trucks and heavy equipment. Topics include: engine cooling systems; air induction and exhaust; fuel supply systems; and fuel management systems. Using and interpreting test equipment is highly emphasized.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1032", "canonical_url": "/centralgatech/courses/diet-1032", "markdown_url": "/centralgatech/courses/diet-1032.md" }, { "id": "centralgatech-000649", "code": "DIET 1050", "title": "| DIESEL EQUIPMENT TECHNOLOGY", "credits": null, "hours": null, "description": "INTERNSHIP (0-180-4) This internship provides the student work experience in the occupational environment. Topics include: application of prerequisite knowledge and skills, problem solving, adaptability to job setting equipment and technology, and development of productivity and quality job performance through practice. The student’s internship experience may be implemented through the use of written individualized training plans, written performance evaluations, and required integrative experiences at the internship site.", "prerequisites": [], "program_ids": [ "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET1050", "canonical_url": "/centralgatech/courses/diet-1050", "markdown_url": "/centralgatech/courses/diet-1050.md" }, { "id": "centralgatech-000650", "code": "DIET 2001", "title": "| HEAVY EQUIPMENT HYDRAULICS", "credits": null, "hours": null, "description": "6) This course introduces the student to basic hydraulic fundamentals, components, system servicing, symbols and schematics. The student will learn component operation and service techniques for maintaining a hydraulic system. The student will also learn to identify the ISO symbols used on hydraulic schematics and to trace the hydraulic schematics. Topics include: general system operation; basic hydraulic principles; hydraulic system components; hydraulic pumps; hydraulic control valves; load sensing pressure control systems; pilot operated hydraulic system operation; and hydraulic actuators.", "prerequisites": [], "program_ids": [ "centralgatech-001051" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET2001", "canonical_url": "/centralgatech/courses/diet-2001", "markdown_url": "/centralgatech/courses/diet-2001.md" }, { "id": "centralgatech-000651", "code": "DIET 2010", "title": "| TRUCK BRAKE SYSTEMS", "credits": null, "hours": null, "description": "This course introduces air and hydraulic brake systems used on medium/heavy duty trucks. Classroom theory on brake systems along Federal Motor Vehicle Safety Standards (FMVSS) is strongly emphasized. Topics include: introduction to hydraulic systems and safety; air brakes air supply and system service; air brakes mechanical service; parking brakes; hydraulic brake system and service; hydraulic brakes mechanical service; hydraulic brakes power assist units; anti- lock brake systems (ABS) and automatic traction control (ATC); and wheel bearings. Co-requisite: DIET 1000, DIET 1010", "prerequisites": [], "program_ids": [ "centralgatech-001050" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DIET2010", "canonical_url": "/centralgatech/courses/diet-2010", "markdown_url": "/centralgatech/courses/diet-2010.md" }, { "id": "centralgatech-000652", "code": "DMPT 1000", "title": "| INTRODUCTION TO DESIGN", "credits": null, "hours": null, "description": "Introduces students to the fundamentals of design concepts, including design, composition and layout, color theory and typography.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001133" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT1000", "canonical_url": "/centralgatech/courses/dmpt-1000", "markdown_url": "/centralgatech/courses/dmpt-1000.md" }, { "id": "centralgatech-000653", "code": "DMPT 1005", "title": "| VECTOR GRAPHICS", "credits": null, "hours": null, "description": "This course is an introduction to the creation of vector imagery. Students will learn to draw illustrations, transform objects, work with layers, patterns, brushes, and filters, use effects and create graphics for the various applications. The focus will be on learning the essential tools, basic operation and commands used in the creation of vector graphics used in different media fields.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001133" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT1005", "canonical_url": "/centralgatech/courses/dmpt-1005", "markdown_url": "/centralgatech/courses/dmpt-1005.md" }, { "id": "centralgatech-000654", "code": "DMPT 1010", "title": "| RASTER IMAGING", "credits": null, "hours": null, "description": "In the Raster Imaging course, the student becomes acquainted with the concepts and software related raster image manipulation. The student is introduced to the workspace and tools used in an image editing software and will learn basic image editing techniques.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001132", "centralgatech-001133" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT1010", "canonical_url": "/centralgatech/courses/dmpt-1010", "markdown_url": "/centralgatech/courses/dmpt-1010.md" }, { "id": "centralgatech-000655", "code": "DMPT 1600", "title": "| INTRODUCTION TO VIDEO PRODUCTION", "credits": null, "hours": null, "description": "(30-60-4) This course is an introduction to the creative and technical aspects of video production. Students will learn the basic terminology and techniques of video production through analysis of produced video works as well as hands-on experience. Students will be introduced to basic digital video production including: pre-production and planning, camera operation and framing, lighting, sound, and post-production with basic editing.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT1600", "canonical_url": "/centralgatech/courses/dmpt-1600", "markdown_url": "/centralgatech/courses/dmpt-1600.md" }, { "id": "centralgatech-000656", "code": "DMPT 2330", "title": "| INTRODUCTION TO CONTENT", "credits": null, "hours": null, "description": "MANAGEMENT SYSTEMS (30-60-4) In this introduction to CMS, the student learns the basics of installing and configuring a Content Management System (CMS) to easily build blogs and small websites. Students will perform common tasks using any of the most popular (and free) Content Management Systems. Prerequisite: COMP 1000", "prerequisites": [ "COMP 1000" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2330", "canonical_url": "/centralgatech/courses/dmpt-2330", "markdown_url": "/centralgatech/courses/dmpt-2330.md" }, { "id": "centralgatech-000657", "code": "DMPT 2400", "title": "| BASIC 3D MODELING AND ANIMATION", "credits": null, "hours": null, "description": "(30-60-4) An introduction to 3D Animation software and component visualization. Students will be introduced to software and basic techniques to begin creating models and material for animation projects. Students will also be introduced to basic lighting and animation concepts so that they will be able to develop a complete animation using 3D software at the end of this course.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2400", "canonical_url": "/centralgatech/courses/dmpt-2400", "markdown_url": "/centralgatech/courses/dmpt-2400.md" }, { "id": "centralgatech-000658", "code": "DMPT 2600", "title": "| BASIC VIDEO EDITING", "credits": null, "hours": null, "description": "An introduction to basic audio and video editing techniques used in digital video production with non-linear software. Students will be introduced to the primary feature set and interface of video editing software and will learn to perform basic editing functions that include setup, adjusting and customizing preferences and settings, capturing video and audio, various editing and trimming techniques and tools, audio editing and audio creation, finishing and output.", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001133", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2600", "canonical_url": "/centralgatech/courses/dmpt-2600", "markdown_url": "/centralgatech/courses/dmpt-2600.md" }, { "id": "centralgatech-000659", "code": "DMPT 2610", "title": "| INTERMEDIATE VIDEO COMPOSITING", "credits": null, "hours": null, "description": "AND BROADCAST ANIMATION (30-60-4) This course will expose students to advanced techniques used in finalizing a video or animation project using compositing software. The class will reinforce compositing concepts, workflow techniques and terminology that students have learned in previous classes. More advanced tools and techniques will be introduced to focus on overall project workflow. Prerequisite: DMPT 2605", "prerequisites": [ "DMPT 2605" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2610", "canonical_url": "/centralgatech/courses/dmpt-2610", "markdown_url": "/centralgatech/courses/dmpt-2610.md" }, { "id": "centralgatech-000660", "code": "DMPT 2615", "title": "| INTERMEDIATE VIDEO EDITING", "credits": null, "hours": null, "description": "This course will focus on more advanced editing and finishing techniques. Students will explore different editing styles and techniques for different genres and learn how to use these techniques to create complex compositions with polished transitions, fix screen direction errors, edit multi-camera projects, edit and mix audio, work with nested sequences, create effects, use filters creatively, color correct video, and manage clips and media. Prerequisite: DMPT 2600", "prerequisites": [ "DMPT 2600" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131", "centralgatech-001134" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2615", "canonical_url": "/centralgatech/courses/dmpt-2615", "markdown_url": "/centralgatech/courses/dmpt-2615.md" }, { "id": "centralgatech-000661", "code": "DMPT 2640", "title": "| COLOR GRADING", "credits": null, "hours": null, "description": "This course will introduce students to color balancing and grading techniques. Prerequisite: DMPT 2600", "prerequisites": [ "DMPT 2600" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2640", "canonical_url": "/centralgatech/courses/dmpt-2640", "markdown_url": "/centralgatech/courses/dmpt-2640.md" }, { "id": "centralgatech-000662", "code": "DMPT 2650", "title": "| VISUAL EFFECTS", "credits": null, "hours": null, "description": "The course will teach students techniques in compositing video with visual effects which includes incorporating 3D elements and pre-keyed footage, applying digital lighting and shading techniques, and applying 3rd party plugins with the goal of creating realistic-looking visual effects. Prerequisite: DMPT 2605", "prerequisites": [ "DMPT 2605" ], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2650", "canonical_url": "/centralgatech/courses/dmpt-2650", "markdown_url": "/centralgatech/courses/dmpt-2650.md" }, { "id": "centralgatech-000663", "code": "DMPT 2660", "title": "| SPECIAL PROJECTS", "credits": null, "hours": null, "description": "In this course students will work closely with the instructor to develop complex, portfolio quality work that reflects his or her skill set in postproduction. Depending on complexity, ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE the instructor may ask students to create a single project, or multiple projects. These may include, but are not limited to, works using motion graphics, visual effects, animation, editing, color grading, or post-production audio. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2660", "canonical_url": "/centralgatech/courses/dmpt-2660", "markdown_url": "/centralgatech/courses/dmpt-2660.md" }, { "id": "centralgatech-000664", "code": "DMPT 2905", "title": "| PRACTICUM/INTERNSHIP II", "credits": null, "hours": null, "description": "Provides an approved industry-like setting where the student develops and sharpens skills. Emphasis is placed on production standards achievement and quality control. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2905", "canonical_url": "/centralgatech/courses/dmpt-2905", "markdown_url": "/centralgatech/courses/dmpt-2905.md" }, { "id": "centralgatech-000665", "code": "DMPT 2930", "title": "| EXIT REVIEW", "credits": null, "hours": null, "description": "Emphasis is placed on student’s production of portfolio- quality pieces. Focuses on the preparation for entry into the job market. Prerequisite: Advisor Approval Medical Diagnostic Sonography", "prerequisites": [], "program_ids": [ "centralgatech-001130", "centralgatech-001131" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMPT2930", "canonical_url": "/centralgatech/courses/dmpt-2930", "markdown_url": "/centralgatech/courses/dmpt-2930.md" }, { "id": "centralgatech-000666", "code": "DMSO 1040", "title": "| SONOGRAPHIC PHYSICS AND", "credits": null, "hours": null, "description": "INSTRUMENATION (15-60-3) Sonographers apply principles of ultrasound in the operation of medical sonographic equipment to produce a sonogram. Knowledge of the interaction of ultrasound with tissue is important for image optimization, acquisition and interpretation of sonographic images, and critical to the accurate diagnosis of disease. Introduces concepts for the factors involved with diagnostic ultrasound principles and instruments. Emphasis will be placed on ultrasound physics, transducer construction, operation and characteristics, artifacts, sonographic transducers and sound beams, hemodynamic and Doppler imaging, sonographic instrumentation, quality assurance/quality control of sonographic instruments, bioeffects and safety. Student laboratory scanning hours are included in this course. Prerequisite: BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMSO1040", "canonical_url": "/centralgatech/courses/dmso-1040", "markdown_url": "/centralgatech/courses/dmso-1040.md" }, { "id": "centralgatech-000667", "code": "DMSO 1080", "title": "| SONOGRAPHIC PHYSICS AND", "credits": null, "hours": null, "description": "INSTRUMENTATION REGISTRY REVIEW (0-30-1) Provides a review of knowledge from previous courses and helps the student prepare for national certification examinations for sonography. Information concerning test taking skills will also be reviewed. Topics include: patient care, safety and communication, physics principles, ultrasound transducers, pulse-echo instrumentation, Doppler instrumentation, and quality assurance/quality control of equipment. Prerequisite: DMSO 1040 Early Childhood Care and Education", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#DMSO1080", "canonical_url": "/centralgatech/courses/dmso-1080", "markdown_url": "/centralgatech/courses/dmso-1080.md" }, { "id": "centralgatech-000668", "code": "ECCE 1101", "title": "| INTRODUCTION TO EARLY CHILDHOOD", "credits": null, "hours": null, "description": "CARE AND EDUCATION (45-0-3) This course introduces concepts relating the responsibilities and procedures involved in a variety of early childhood care situations. Topics include historical perspectives; professionalism; guidance; developmentally appropriate practices; learning environment (including all children); cultural diversity; and licensing, accreditation, and credentialing.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1101", "canonical_url": "/centralgatech/courses/ecce-1101", "markdown_url": "/centralgatech/courses/ecce-1101.md" }, { "id": "centralgatech-000669", "code": "ECCE 1103", "title": "| CHILD GROWTH AND DEVELOPMENT", "credits": null, "hours": null, "description": "(45-0-3) This course introduces the student to the physical, social, emotional, and cognitive development of the young child (prenatal through 12 years of age). The course provides for competency development in observing, recording, and interpreting growth and development stages in the young child; advancing physical and intellectual competence; supporting social and emotional development; and examining relationships between child development and positive guidance. Topics include developmental characteristics, prenatal through age 12, developmental guidance applications, observing and recording techniques, ages and stages of development, and introduction to children with special needs.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1103", "canonical_url": "/centralgatech/courses/ecce-1103", "markdown_url": "/centralgatech/courses/ecce-1103.md" }, { "id": "centralgatech-000670", "code": "ECCE 1112", "title": "| CURRICULUM AND ASSESSMENT", "credits": null, "hours": null, "description": "This course provides student with an understanding of developmentally effective approaches to teaching, learning, observing, documenting and assessment strategies that promote positive development for young children. The course will enable the student to establish a learning environment appropriate for young children and to identify the goals, benefits, and uses of assessment in the development of curriculum for young children. Topics include observing, documenting, and assessing; learning environments; development of curriculum plans and materials; curriculum approaches; and instructional media. Prerequisites/Co-Prerequisite: ECCE 1103 and two of the following: ECCE 1113, ECCE 2115, or ECCE 2116", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1112", "canonical_url": "/centralgatech/courses/ecce-1112", "markdown_url": "/centralgatech/courses/ecce-1112.md" }, { "id": "centralgatech-000671", "code": "ECCE 1113", "title": "| CREATIVE ACTIVITIES FOR CHILDREN", "credits": null, "hours": null, "description": "(30-30-3) Introduces the concepts related to creativity in art, music, movement and creative drama, and facilitating children’s creative expression across the curriculum. Topics include concepts of creativity and expression; theories of young children’s creative development; facilitation of children’s creative expression, media, methods and materials across the curriculum; appreciation of children’s art processes and products; appreciation of children’s creativity in music, movement and dance; appreciation of children’s creative expression in play and creative drama; and art and music appreciation.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1113", "canonical_url": "/centralgatech/courses/ecce-1113", "markdown_url": "/centralgatech/courses/ecce-1113.md" }, { "id": "centralgatech-000672", "code": "ECCE 1120", "title": "| EARLY CHILDHOOD CARE AND EDUCATION", "credits": null, "hours": null, "description": "PRACTICUM I (15-90-3) This course provides the student with a supervised opportunity to gain experience in the actual lab or job setting to observe children and teaching in action. Practicum training topics include good work habits; supervised interaction with children, parents, and co-workers; observation for the purpose of assessment and evaluation; and documentation of a child’s development. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1120", "canonical_url": "/centralgatech/courses/ecce-1120", "markdown_url": "/centralgatech/courses/ecce-1120.md" }, { "id": "centralgatech-000673", "code": "ECCE 1121", "title": "| EARLY CHILDHOOD CARE AND EDUCATION", "credits": null, "hours": null, "description": "PRACTICUM (15-90-3) This course provides the student with the opportunity to gain a supervised experience in a practicum placement site allowing demonstration of techniques obtained from course work. Practicum topics include promoting child development and learning; building family and community relationships; observing, documenting, and assessing to support young children and families; teaching and learning; becoming ACADEMIC PROGRAMS a professional; and guidance techniques and classroom management. Prerequisite/Co-Prerequisite: ECCE 1105, ECCE 1112", "prerequisites": [ "ECCE 1105", "ECCE 1112" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE1121", "canonical_url": "/centralgatech/courses/ecce-1121", "markdown_url": "/centralgatech/courses/ecce-1121.md" }, { "id": "centralgatech-000674", "code": "ECCE 2115", "title": "| LANGUAGE AND LITERACY", "credits": null, "hours": null, "description": "This course develops knowledge, skills, and abilities in supporting young children’s literacy acquisition and development, birth through age twelve. Topics include developmental continuum of reading and writing, literacy acquisition birth to five years of age, literacy acquisition in kindergarten, literacy acquisition in early grades, and literacy acquisition in children who are culturally and linguistically diverse. Prerequisite/Co-Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2115", "canonical_url": "/centralgatech/courses/ecce-2115", "markdown_url": "/centralgatech/courses/ecce-2115.md" }, { "id": "centralgatech-000675", "code": "ECCE 2116", "title": "| MATH AND SCIENCE", "credits": null, "hours": null, "description": "This course presents the process of introducing math and science concepts to young children; which includes planning and implementation of developmentally appropriate activities and development of math and science materials, media and methods. Topics include inquiry approach to learning; cognitive stages and developmental processes in developing math and science concepts with children birth to five; cognitive stages and developmental processes in developing math and science concepts with children in kindergarten and primary grades; planning math and science activities; and development of math and science materials, media and methods. Prerequisite/Co-Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2116", "canonical_url": "/centralgatech/courses/ecce-2116", "markdown_url": "/centralgatech/courses/ecce-2116.md" }, { "id": "centralgatech-000676", "code": "ECCE 2201", "title": "| EXCEPTIONALITIES", "credits": null, "hours": null, "description": "Provides for the development of knowledge and skills that will enable the student to understand individuals with special needs and appropriately guide their development. Special emphasis is placed on acquainting the student with programs and community resources that serve families with children with special needs. Topics include inclusion/least restrictive environment (LRE), physical and motor impairments, gifted/ talented, intellectual and cognitive disabilities, emotional and behavioral disorders, communication disorders in speech and language, autism spectrum disorders, visual impairments, deaf and hard of hearing, health impairments, multiple disabilities, and community resources. Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2201", "canonical_url": "/centralgatech/courses/ecce-2201", "markdown_url": "/centralgatech/courses/ecce-2201.md" }, { "id": "centralgatech-000677", "code": "ECCE 2202", "title": "| SOCIAL ISSUES AND FAMILY", "credits": null, "hours": null, "description": "INVOLVEMENT (45-0-3) This course enables the student to value the complex characteristics of children’s families and communities and to develop culturally responsive practices which will support family partnerships. Students use their understanding to build reciprocal relationships which promote children’s development and learning. Students are introduced to local programs and agencies that offer services to children and families within the community. Topics include professional responsibilities, family/social issues, community resources, family education and support, teacher-family communication, community partnerships, social diversity and anti-bias concerns, successful transitions, and school-family activities.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2202", "canonical_url": "/centralgatech/courses/ecce-2202", "markdown_url": "/centralgatech/courses/ecce-2202.md" }, { "id": "centralgatech-000678", "code": "ECCE 2203", "title": "| GUIDANCE AND CLASSROOM", "credits": null, "hours": null, "description": "MANAGEMENT (45-0-3) This course examines effective guidance practices in group settings based upon the application of theoretical models of child development and of developmentally appropriate practices. Focus will be given to individual, family, and cultural diversity. Topics will include developmentally appropriate child guidance (birth through 12); effective classroom management, including preventive and interventive techniques; understanding challenging behaviors; and implementing guidance plans. Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2203", "canonical_url": "/centralgatech/courses/ecce-2203", "markdown_url": "/centralgatech/courses/ecce-2203.md" }, { "id": "centralgatech-000679", "code": "ECCE 2310", "title": "| PARAPROPESSIONAL METHODS AND", "credits": null, "hours": null, "description": "MATERIALS (45-0-3) This course develops the instructional skills to enable the student to work as a paraprofessional in a program for kindergarten through elementary age children. Topics include assessment and curriculum, instructional techniques, and methods for instruction in a learning environment. Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2310", "canonical_url": "/centralgatech/courses/ecce-2310", "markdown_url": "/centralgatech/courses/ecce-2310.md" }, { "id": "centralgatech-000680", "code": "ECCE 2320", "title": "| PROGRAM ADMINISTRATION AND", "credits": null, "hours": null, "description": "FACILITY MANAGEMENT (45-0-3) Provides training in planning, implementation, and maintenance of an effective early childhood program and facility. Topics include organization, mission, philosophy, goals of a program; types of programs; laws, rules, regulations, accreditation, and program evaluation; needs assessment; administrative roles and board of directors; anti-bias program development; child development and developmentally appropriate practices; marketing, public and community relations, grouping, enrollment and retention; working with families; professionalism and work ethics; space management; money management; and program, equipment, and supplies management.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2320", "canonical_url": "/centralgatech/courses/ecce-2320", "markdown_url": "/centralgatech/courses/ecce-2320.md" }, { "id": "centralgatech-000681", "code": "ECCE 2330", "title": "| INFANT/TODDLER DEVELOPMENT", "credits": null, "hours": null, "description": "This course introduces the three developmentally meaningful age periods during infancy. Provides knowledge, grounded in brain and attachment research, about how children learn and the skills and attitudes necessary to support optimum social/emotional, cognitive, and physical development for ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE children from birth to three. Principles of brain development and language and communication will be explored in depth. Special emphasis is placed on experiential learning to show caregivers practical ways of meeting the fundamental needs of all infants in group care settings and of helping them learn the lessons that every infant comes into the world eager to learn. The needs of infants and toddlers with established disabilities as well as those at risk for developmental problems will be examined from the perspective of early intervention and inclusion.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2330", "canonical_url": "/centralgatech/courses/ecce-2330", "markdown_url": "/centralgatech/courses/ecce-2330.md" }, { "id": "centralgatech-000682", "code": "ECCE 2360", "title": "| CLASSROOM STRATEGIES FOR", "credits": null, "hours": null, "description": "EXCEPTIONAL CHILDREN (45-0-3) Prepares child care providers and paraprofessionals with knowledge and skills in the areas of working effectively with children with a disability; working with families as partners; examining the laws and regulations; exploring resources, service providers, and agencies that may assist the child and his/her family; examining the adaptations and modifications to facilities and environments; reviewing the referral process; implementing inclusion; modifying instruction to accommodate the child with special needs; and investigating ways to document and chart observations. Prerequisite: ECCE 2201", "prerequisites": [ "ECCE 2201" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2360", "canonical_url": "/centralgatech/courses/ecce-2360", "markdown_url": "/centralgatech/courses/ecce-2360.md" }, { "id": "centralgatech-000683", "code": "ECCE 2340", "title": "FAMILY CHILD CARE PROGRAM", "credits": null, "hours": null, "description": "MANAGEMENT (45-0-3) Provides the guidelines, responsibilities, and appropriate practices needed for successful management of a Family Child Care Home. Provides guidelines and responsibilities for professional business practices associated with the successful establishment and administration of a Family Child Care Home. Topics include business plans, budgeting, taxes, marketing, record keeping, and professional qualifications. Prerequisite: ECCE 1103", "prerequisites": [ "ECCE 1103" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECCE2340", "canonical_url": "/centralgatech/courses/ecce-2340", "markdown_url": "/centralgatech/courses/ecce-2340.md" }, { "id": "centralgatech-000684", "code": "ECET 1102", "title": "Laboratory work includes circuit construction", "credits": null, "hours": null, "description": "use of appropriate instruments, troubleshooting and circuit simulation using P-SPICE. Laboratory work emphasizes knowledge and ability to analyze basic DC circuits and introductory concepts of AC circuits. Topics include: international units, basic electrical laws, series and parallel circuits, network analysis concepts, network theorems concepts, D.C. instruments, grounding techniques, magnetism, inductance/capacitance and transient analysis. Co-requisites: ECET 1102, ENGT 1000, MATH 1111", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1102", "canonical_url": "/centralgatech/courses/ecet-1102", "markdown_url": "/centralgatech/courses/ecet-1102.md" }, { "id": "centralgatech-000685", "code": "ECET 1102L", "title": "| CIRCUIT ANALYSIS I LAB", "credits": null, "hours": null, "description": "This course contains selected lab exercises that parallel", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1102L", "canonical_url": "/centralgatech/courses/ecet-1102l", "markdown_url": "/centralgatech/courses/ecet-1102l.md" }, { "id": "centralgatech-000686", "code": "ECET 1111", "title": "| DIGITAL SYSTEMS I", "credits": null, "hours": null, "description": "Study of digital circuit fundamentals with an emphasis on digital electronics and techniques, simplification of logic circuits, sequential and combinational logic circuits, programmable logic devices, flip-flops and registers, binary number system, and arithmetic and logic operations. Laboratory work parallels class work using trainers, DesignWorks, and Altera simulation software and system. Prerequisite: ENGT 1000 Co-requisite: ECET 1111L", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1111", "canonical_url": "/centralgatech/courses/ecet-1111", "markdown_url": "/centralgatech/courses/ecet-1111.md" }, { "id": "centralgatech-000687", "code": "ECET 1111L", "title": "| DIGITAL SYSTEMS I LAB", "credits": null, "hours": null, "description": "Study of digital circuit fundamentals with an emphasis on digital electronics and techniques, simplification of logic circuits, sequential and combinational logic circuits, programmable logic devices, flip-flops and registers, binary number system, and arithmetic and logic operations. ACADEMIC PROGRAMS Laboratory work parallels classwork using trainers, DesignWorks, and Altera simulation software and system. Prerequisite: ENGT 1000 Co-requisite: ECET 1111", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET1111L", "canonical_url": "/centralgatech/courses/ecet-1111l", "markdown_url": "/centralgatech/courses/ecet-1111l.md" }, { "id": "centralgatech-000688", "code": "ECET 2102", "title": "| CIRCUIT ANALYSIS II", "credits": null, "hours": null, "description": "Continues study of AC circuit analysis, which emphasizes complex networks. Topics include: analysis of complex networks, networks with multiple sources, AC network theorems, resonance, transformers, three-phase systems, filters and bode plots, non-sinusoidal waveforms, and pulse response of RLC circuits. Laboratory work parallels class work. Prerequisite: ECET 1101, MATH 1111 Co-requisite: ECET 2102L", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2102", "canonical_url": "/centralgatech/courses/ecet-2102", "markdown_url": "/centralgatech/courses/ecet-2102.md" }, { "id": "centralgatech-000689", "code": "ECET 2102L", "title": "| CIRCUIT ANALYSIS II LAB", "credits": null, "hours": null, "description": "Continues study of AC circuit analysis, which emphasizes complex networks. Topics include: analysis of complex networks, networks with multiple sources, AC network theorems, resonance, transformers, three-phase systems, filters and bode plots, non-sinusoidal waveforms, and pulse response of RLC circuits. Laboratory work parallels class work. Prerequisite: ECET 1101, MATH 1111 Co-requisites: ECET 2102", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2102L", "canonical_url": "/centralgatech/courses/ecet-2102l", "markdown_url": "/centralgatech/courses/ecet-2102l.md" }, { "id": "centralgatech-000690", "code": "ECET 2111", "title": "| DIGITAL SYSTEMS II", "credits": null, "hours": null, "description": "Continues the study of digital systems with emphasis on the study of microcomputers with programming applications involving external devices with which the microprocessor/ microcontroller must communicate. Topics include: logic families, PLD programming, microcomputer architecture, programming with arithmetic/logic instructions, jump, loop and call operations, I/O programming, timers, interrupts and interfacing techniques. Laboratory work parallels class work to include use of PLD (programmable logic devices) platforms, and microprocessor/microcontroller platforms to reinforce and edify theoretical concepts. Prerequisite: ECET 1110 Co-requisites: ECET 2111L", "prerequisites": [], "program_ids": [ "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2111", "canonical_url": "/centralgatech/courses/ecet-2111", "markdown_url": "/centralgatech/courses/ecet-2111.md" }, { "id": "centralgatech-000691", "code": "ECET 2111L", "title": "| DIGITAL SYSTEMS II LAB", "credits": null, "hours": null, "description": "Continues the study of digital systems with emphasis on the study of microcomputers with programming applications involving external devices with which the microprocessor/ microcontroller must communicate. Topics include: logic families, PLD programming, microcomputer architecture, programming with arithmetic/logic instructions, jump, loop and call operations, I/O programming, timers, interrupts and interfacing techniques. Laboratory work parallels class work to include use of PLD (programmable logic devices) platforms, and microprocessor/microcontroller platforms to reinforce and edify theoretical concepts. Prerequisite: ECET 1110 Co-requisites: ECET 2111", "prerequisites": [], "program_ids": [ "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2111L", "canonical_url": "/centralgatech/courses/ecet-2111l", "markdown_url": "/centralgatech/courses/ecet-2111l.md" }, { "id": "centralgatech-000692", "code": "ECET 2121", "title": "| ELECTRONIC CIRCUITS I", "credits": null, "hours": null, "description": "Introduces the conduction process in semiconductor materials and devices. Topics include semiconductor physics; diodes; basic diode circuits and applications; biasing, stability and graphical analysis of bipolar junction transistors and field effect transistors; introduction to silicon controlled rectifiers; device curve characteristics; and related devices with selected applications. Laboratory work includes circuit construction, use of appropriate instruments, troubleshooting and circuit simulation using P-SPICE. Co-requisite: ECET 2121L", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2121", "canonical_url": "/centralgatech/courses/ecet-2121", "markdown_url": "/centralgatech/courses/ecet-2121.md" }, { "id": "centralgatech-000693", "code": "ECET 2121L", "title": "| ELECTRONIC CIRCUITS I LAB", "credits": null, "hours": null, "description": "Introduces the conduction process in semiconductor materials and devices. Topics include semiconductor physics; diodes; basic diode circuits and applications; biasing, stability and graphical analysis of bipolar junction transistors and field effect transistors; introduction to silicon controlled rectifiers; device curve characteristics; and related devices with selected applications. Laboratory work includes circuit construction, use of appropriate instruments, troubleshooting and circuit simulation using P-SPICE. Co-requisite: ECET 2121 Electrocardiography", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECET2121L", "canonical_url": "/centralgatech/courses/ecet-2121l", "markdown_url": "/centralgatech/courses/ecet-2121l.md" }, { "id": "centralgatech-000694", "code": "ECGT 1030", "title": "| INTRODUCTION TO", "credits": null, "hours": null, "description": "ELECTROCARDIOGRAPHY (60-30-5) Provides an introduction to electrocardiography techniques and record keeping. Emphasis is placed on the knowledge and skills needed to perform ECG on all types of patients. Topics include: infection control techniques, basic life support, legalities and ethics, basic cardiovascular anatomy and physiology, ECG techniques and recognition, ECG lead placement, technical aspects of the ECG, ECG rhythm strip interpretation, advanced ECG techniques and a Cardiovascular Credentialing International (CCI) exam review. Prerequisite: ALHS 1011, ALHS 1090, ENGL 1010, MATH 1011, PSYC 1010 Co-requisite: ECGT 1050", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECGT1030", "canonical_url": "/centralgatech/courses/ecgt-1030", "markdown_url": "/centralgatech/courses/ecgt-1030.md" }, { "id": "centralgatech-000695", "code": "ECGT 1050", "title": "| ELECTROCARDIOGRAPHY PRACTICUM", "credits": null, "hours": null, "description": "(0-225-5) Provides an introduction to clinical practice in the setting of hospitals, clinics, and medical offices. Students must demonstrate regard for the dignity, rights, and privacy of each patient. They must also abide by the policies and procedures of each clinical setting. Students will be able to learn by doing electrocardiography techniques and record keeping. Emphasis is placed on the application of knowledge and skills gained in the classroom. Students will have the opportunity to display their ability to interact appropriately with patients, family members, and other members of the healthcare team. Students may be required to perform Basic Life Support. Topics include: application of classroom knowledge and skills and functioning in the work environment. Prerequisite: ENGL 1010, MATH 1012, PSYC 1010 Co-requisite: ALHS 1011, ALHS 1090, ECGT 1030 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Echocardiography", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECGT1050", "canonical_url": "/centralgatech/courses/ecgt-1050", "markdown_url": "/centralgatech/courses/ecgt-1050.md" }, { "id": "centralgatech-000696", "code": "ECHO 1100", "title": "| ECHOCARDIOGRAPHY FUNDAMENTALS", "credits": null, "hours": null, "description": "(30-30-3) This course introduces the basic principles and applications of the physical assessment and echocardiographic procedures. Discussion of medical law and ethics as it relates to the professional scope of practice. Topics include basic echocardiographic imaging principles, patient skills and equipment instrumentation, basic Doppler and color principles, medical law and ethics and common terminology and abbreviations. Prerequisite: BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO1100", "canonical_url": "/centralgatech/courses/echo-1100", "markdown_url": "/centralgatech/courses/echo-1100.md" }, { "id": "centralgatech-000697", "code": "ECHO 1310", "title": "| ECHOCARDIOGRAPHY I", "credits": null, "hours": null, "description": "This course utilizes cardiac sonography fundamentals to evaluate cardiac anatomy, function and hemodynamics in diagnosing coronary artery heart disease. Incorporates all forms of noninvasive cardiovascular evaluation with emphasis on performance and interpretation of M-mode, 2-demensional, and Doppler echocardiography. Emphasis will be placed on obtaining quality echocardiograms, and laboratory experience will demonstrate the application of theoretical principles and concepts. Topics include: ventricular function, coronary artery disease, stress echocardiography, transesophageal echocardiography (TEE), 3-D/4-D Echocardiography, contrast echocardiography and advanced techniques/procedures. Prerequisite: ECHO 1100", "prerequisites": [ "ECHO 1100" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO1310", "canonical_url": "/centralgatech/courses/echo-1310", "markdown_url": "/centralgatech/courses/echo-1310.md" }, { "id": "centralgatech-000698", "code": "ECHO 1320", "title": "| ECHOCARDIOGRAPHY II", "credits": null, "hours": null, "description": "This course utilizes fundamentals to evaluate cardiac function and acquired disease states. Incorporates all forms of noninvasive cardiovascular evaluation with emphasis on performance and interpretation of M-mode, 2-dimensional, and Doppler echocardiography. Emphasis will be placed on obtaining quality echocardiograms, and laboratory experience will demonstrate the application of theoretical principles and concepts. Topics include: valvular heart disease, cardiomyopathies, systemic and pulmonary hypertensive heart disease, pericardial diseases, systemic disease, cardiac transplantation, cardiac tumors/masses, diseases of the aorta, pericardial diseases, and miscellaneous topics. Prerequisite: Program admission Co-requisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO1320", "canonical_url": "/centralgatech/courses/echo-1320", "markdown_url": "/centralgatech/courses/echo-1320.md" }, { "id": "centralgatech-000699", "code": "ECHO 1372", "title": "| ECHOCARDIOGRAPHY CLINICAL I", "credits": null, "hours": null, "description": "(0-135-3) Provides hands-on experience in performing noninvasive procedures with emphasis on instrumentation and development of clinical techniques. Topics include policies and procedures, echocardiographic instrumentation, recording patient information, patient preparation, and performing echocardiographic examinations. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO1372", "canonical_url": "/centralgatech/courses/echo-1372", "markdown_url": "/centralgatech/courses/echo-1372.md" }, { "id": "centralgatech-000700", "code": "ECHO 2310", "title": "| PEDIATRIC ECHOCARDIOGRAPHY", "credits": null, "hours": null, "description": "This course offers an introduction to congenital heart disease with instruction on fetal cardiac embryology, pediatric pathology, age appropriate patient care, corrective surgical procedures. Emphasis is placed on the latest modalities and specialties of a pediatric noninvasive cardiac diagnostic study. Topics include: fetal cardiac embryology, acyanotic lesions, cyanotic lesions, complex congenital heart disease, corrective surgical procedures, Doppler, color flow, and 2-D imaging, research methods, syndromes, sedation, and transducer selection. Prerequisite: Program admission Co-requisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO2310", "canonical_url": "/centralgatech/courses/echo-2310", "markdown_url": "/centralgatech/courses/echo-2310.md" }, { "id": "centralgatech-000701", "code": "ECHO 2362", "title": "| ECHOCARDIOGRAPHY CLINICAL II", "credits": null, "hours": null, "description": "B) (0-135-3) This course provides hands-on experience in the clinical setting with an emphasis placed on the development of clinical techniques employed to obtain meaningful data. Continued participation by the student will progressively lead to the student performing diagnostic procedures with less assistance but under the supervision of an appropriately credentialed sonographer. Topics include: echocardiographic instrumentation, logging and reporting information, preparation for echocardiographic examinations, medical ethics and performing echocardiographic procedures. Students may do a brief rotation through an invasive cardiology lab, pediatric lab and/or vascular lab. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO2362", "canonical_url": "/centralgatech/courses/echo-2362", "markdown_url": "/centralgatech/courses/echo-2362.md" }, { "id": "centralgatech-000702", "code": "ECHO 2370", "title": "| ECHOCARDIOGRAPHY CLINICAL III", "credits": null, "hours": null, "description": "(0-450-10) This course builds on the knowledge and skills learned in Clinical Echo 3. By the end of this rotation, the student will perform all echocardiography procedures independently with the supervision of an appropriately credentialed sonographer. This course provides a culminating clinical setting experience which allows students to synthesize information and procedural instruction provided throughout the program. Emphasis is placed on skill level improvements and final completion of all required clinical competencies presented in previous courses and practiced in previous clinical vascular courses. Topics include: scanning, documentation of pathologies, patient and equipment skills, current literature, professionalism, and ethical behavior. Prerequisite: Program admission Co-requisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECHO2370", "canonical_url": "/centralgatech/courses/echo-2370", "markdown_url": "/centralgatech/courses/echo-2370.md" }, { "id": "centralgatech-000703", "code": "ECON 2105", "title": "MACROECONOMICS", "credits": null, "hours": null, "description": "Provides a description and analysis of macroeconomic principles and policies. Topics include basic economic principles, macroeconomic concepts, equilibrium in the goods and money markets, macroeconomic equilibrium and the impact of fiscal and monetary policies. Prerequisite: Appropriate placement test score", "prerequisites": [], "program_ids": [ "centralgatech-001098" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ECON2105", "canonical_url": "/centralgatech/courses/econ-2105", "markdown_url": "/centralgatech/courses/econ-2105.md" }, { "id": "centralgatech-000704", "code": "EDUC 2110", "title": "| INVESTIGATING CRITICAL AND", "credits": null, "hours": null, "description": "CONTEMPORARY ISSUES (45-0-3) This course is a critical and theoretical exploration of the “Foundations of Education” and engages students in observations, interactions, and analyses of critical and contemporary educational issues. Students will investigate issues influencing the social and political contexts of educational settings in Georgia, the United States, and globally. Students will actively examine the teaching profession from multiple vantage points both within and outside the school. Against this backdrop, students will reflect on and interpret the meaning of education and schooling in a diverse culture and examine the moral and ethical responsibilities of teaching in a democracy. Successful completion of 10 hours of field experience is required. This course prepares students for transfer to complete a Bachelor’s of Education degree in Elementary or Middle Grades Education. Students interested in B.S.Ed. transfer should enroll under the General Studies AS major. EDUC courses are accepted for Area F transfer credit as specified in select CGTC articulation agreements for General Studies.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EDUC2110", "canonical_url": "/centralgatech/courses/educ-2110", "markdown_url": "/centralgatech/courses/educ-2110.md" }, { "id": "centralgatech-000705", "code": "ELCR 1007", "title": "| INTRODUCTION TO ELECTRONICS", "credits": null, "hours": null, "description": "ASSEMBLY (30-30-3) This course introduces Electronics and develops the basic skills necessary to perform work in the Electronics Technology field. Topics include: basic electronic knowledge, safety practices, basic components, schematic symbols and drawings, anti-static grounding, soldering technology, connector technology, and basic math skills.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001060", "centralgatech-001061", "centralgatech-001062" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1007", "canonical_url": "/centralgatech/courses/elcr-1007", "markdown_url": "/centralgatech/courses/elcr-1007.md" }, { "id": "centralgatech-000706", "code": "ELCR 1130", "title": "| SOLID STATE DEVICES I", "credits": null, "hours": null, "description": "This course provides instruction in the theory and application of solid-state devices in the electronics industry. Emphasis is placed on the physical characteristics and uses of solid- state devices. Topics include safety practices, semiconductor fundamentals, power supplies and voltage regulation, other diode applications, bipolar junction theory and application, and field effect transistors. Prerequisite: ELCR 1120", "prerequisites": [ "ELCR 1120" ], "program_ids": [ "centralgatech-001059", "centralgatech-001060" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1130", "canonical_url": "/centralgatech/courses/elcr-1130", "markdown_url": "/centralgatech/courses/elcr-1130.md" }, { "id": "centralgatech-000707", "code": "ELCR 1135", "title": "| SOLID STATE DEVICES II", "credits": null, "hours": null, "description": "This course provides in-depth instruction on the characteristics and applications of advanced solid-state circuits to include linear devices. Topics include safety practices, operational amplifiers, active filters and oscillators, switching circuits and timers, three-terminal voltage regulators, and special transistor applications. Prerequisite: ELCR 1130", "prerequisites": [ "ELCR 1130" ], "program_ids": [ "centralgatech-001059", "centralgatech-001060" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1135", "canonical_url": "/centralgatech/courses/elcr-1135", "markdown_url": "/centralgatech/courses/elcr-1135.md" }, { "id": "centralgatech-000708", "code": "ELCR 1140", "title": "| DIGITAL FUNDAMENTALS", "credits": null, "hours": null, "description": "This course is designed to provide coverage of the fundamentals of digital electronics. Topics include safety practices, digital basics, number systems, logic gates and truth tables, combining logic gates, logic families, displays, flip-flops, counters and shift registers, digital systems, and interfacing with analog devices. Prerequisite: ELCR 1120", "prerequisites": [ "ELCR 1120" ], "program_ids": [ "centralgatech-001059", "centralgatech-001060" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1140", "canonical_url": "/centralgatech/courses/elcr-1140", "markdown_url": "/centralgatech/courses/elcr-1140.md" }, { "id": "centralgatech-000709", "code": "ELCR 1230", "title": "| COMMUNICATIONS ELECTRONICS SURVEY", "credits": null, "hours": null, "description": "(45-0-3) This course introduces the fundamental concepts and devices used in electronics communications. Topics include transmission, modulation and detection, receivers, transmitters, propagation, antennas, and deterioration.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR1230", "canonical_url": "/centralgatech/courses/elcr-1230", "markdown_url": "/centralgatech/courses/elcr-1230.md" }, { "id": "centralgatech-000710", "code": "ELCR 2215", "title": "| ANALOG COMMUNICATIONS", "credits": null, "hours": null, "description": "This course provides a study of a communication system emphasizing block fundamental concepts of modulation, transmission, reception, and detection for both amplitude modulation and frequency modulation-based communication systems. Topics include communication system concepts, communication system measurements and quantities, amplitude modulation transmission/reception, and frequency modulation transmission/reception. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2215", "canonical_url": "/centralgatech/courses/elcr-2215", "markdown_url": "/centralgatech/courses/elcr-2215.md" }, { "id": "centralgatech-000711", "code": "ELCR 2225", "title": "| DIGITAL COMMUNICATIONS", "credits": null, "hours": null, "description": "This course provides a study of communication systems emphasizing block fundamental concepts of digital modulation, transmission and reception, as well as fundamental coding, and decoding techniques. Topics include digital communication fundamentals, digital modulation techniques, data transmission error correction methods, and digital signal processing. Prerequisite: ELCR 2215", "prerequisites": [ "ELCR 2215" ], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2225", "canonical_url": "/centralgatech/courses/elcr-2225", "markdown_url": "/centralgatech/courses/elcr-2225.md" }, { "id": "centralgatech-000712", "code": "ELCR 2235", "title": "| ANTENNA AND TRANSMISSION LINES", "credits": null, "hours": null, "description": "(45-30-4) Provides an understanding of antennas and transmission lines used in communications. Topics include: transmission lines, wave guides, antenna types, antenna applications, and telephone transmission lines. Prerequisite: ELCR 1120", "prerequisites": [ "ELCR 1120" ], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2235", "canonical_url": "/centralgatech/courses/elcr-2235", "markdown_url": "/centralgatech/courses/elcr-2235.md" }, { "id": "centralgatech-000713", "code": "ELCR 2245", "title": "| MICROWAVE COMMUNICATIONS AND", "credits": null, "hours": null, "description": "RADAR (45-30-4) Provides a basic understanding of microwave communications and radar. Topics include: microwave and radar fundamentals, ACADEMIC PROGRAMS microwave devices, wave guides, specialized antennas, radar systems, and communications systems. Prerequisite: ELCR 1120", "prerequisites": [ "ELCR 1120" ], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2245", "canonical_url": "/centralgatech/courses/elcr-2245", "markdown_url": "/centralgatech/courses/elcr-2245.md" }, { "id": "centralgatech-000714", "code": "ELCR 2595", "title": "| OPTICAL FIBER SYSTEMS", "credits": null, "hours": null, "description": "Introduces the fundamentals of fiber optics and explores the applications of fiber optic transmission systems. Laboratory exercises give students hands-on experience with fiber optic devices and test equipment. Topics includes: fundamentals of fiber optics, types of optical fibers, fiber materials and manufacture, cabling, light sources/transmitters/receivers, connectors, splicing, test measurement, and fiber optic system design. Prerequisite: Advisor Approval Electrical Technology", "prerequisites": [], "program_ids": [ "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELCR2595", "canonical_url": "/centralgatech/courses/elcr-2595", "markdown_url": "/centralgatech/courses/elcr-2595.md" }, { "id": "centralgatech-000715", "code": "ELTR 1000", "title": "| FUNDAMENTAL ELECTRICAL CONCEPTS", "credits": null, "hours": null, "description": "(45-45-4) This course introduces the student to the electrical trade. Emphasis is placed on orientation to the trade, safety, basic electrical theory, electrical codes, and basic electrical wiring practices.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001054", "centralgatech-001058" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1000", "canonical_url": "/centralgatech/courses/eltr-1000", "markdown_url": "/centralgatech/courses/eltr-1000.md" }, { "id": "centralgatech-000716", "code": "ELTR 1025", "title": "| INTERMEDIATE ELECTRICAL CONCEPTS II", "credits": null, "hours": null, "description": "(45-45-4) This course continues to introduce those specific job skills needed for a typical electrician. Topics in this course include pull and junction boxes, conductor installations, terminations and splices, circuit breakers and fuses, and control systems fundamentals.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001056" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1025", "canonical_url": "/centralgatech/courses/eltr-1025", "markdown_url": "/centralgatech/courses/eltr-1025.md" }, { "id": "centralgatech-000717", "code": "ELTR 1030", "title": "| ELECTRICAL SYSTEMS BASICS II", "credits": null, "hours": null, "description": "This course introduces electrical theory and principles used in residential, commercial, and industrial wiring applications. Emphasis is placed in electron theory, DC and AC circuits, Ohm’s law, test equipment, transformers, and electrical power systems. Topics include electricity production, electrical formulas, test equipment, transformer fundamentals, and fundamentals of AC and DC circuits.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1030", "canonical_url": "/centralgatech/courses/eltr-1030", "markdown_url": "/centralgatech/courses/eltr-1030.md" }, { "id": "centralgatech-000718", "code": "ELTR 1035", "title": "| ADVANCED ELECTRICAL CONCEPTS", "credits": null, "hours": null, "description": "(45-45-4) This course introduces the student to more advanced electrical applications. Topics include load calculations, conductor selection and calculations, practical lighting applications, hazardous locations, and overcurrent protection.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001056" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1035", "canonical_url": "/centralgatech/courses/eltr-1035", "markdown_url": "/centralgatech/courses/eltr-1035.md" }, { "id": "centralgatech-000719", "code": "ELTR 1060", "title": "| ELECTRICAL PRINTS, SCHEMATICS AND", "credits": null, "hours": null, "description": "SYMBOLS (15-30-2) This course introduces electrical symbols and their use in construction blueprints, electrical schematics, and diagrams. Topics include electrical symbols, component identification, print reading and scales and measurement.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001055", "centralgatech-001057", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1060", "canonical_url": "/centralgatech/courses/eltr-1060", "markdown_url": "/centralgatech/courses/eltr-1060.md" }, { "id": "centralgatech-000720", "code": "ELTR 1065", "title": "| SPECIALITY ELECTRICAL CONCEPTS I", "credits": null, "hours": null, "description": "(45-45-4) This course introduces students to specialty situations found in the electrical construction trade. Topics include specialty load calculations, health care facilities, standby and emergency systems, fire alarms, and advanced controls.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001058" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1065", "canonical_url": "/centralgatech/courses/eltr-1065", "markdown_url": "/centralgatech/courses/eltr-1065.md" }, { "id": "centralgatech-000721", "code": "ELTR 1080", "title": "| COMMERCIAL WIRING I", "credits": null, "hours": null, "description": "This course introduces commercial wiring practices and procedures. Topics include industrial safety procedures, the National Electrical Code, commercial load calculations, three- phase power systems, and fundamentals of AC motor control.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001055" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1080", "canonical_url": "/centralgatech/courses/eltr-1080", "markdown_url": "/centralgatech/courses/eltr-1080.md" }, { "id": "centralgatech-000722", "code": "ELTR 1090", "title": "| COMMERCIAL WIRING II", "credits": null, "hours": null, "description": "This course is a continuation of the study in commercial wiring practices and procedures. Topics include transformer connections, an introduction to low voltage systems, conduit design and installation practices, and system design concepts.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001055" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1090", "canonical_url": "/centralgatech/courses/eltr-1090", "markdown_url": "/centralgatech/courses/eltr-1090.md" }, { "id": "centralgatech-000723", "code": "ELTR 1110", "title": "| ELECTRIC MOTORS", "credits": null, "hours": null, "description": "This course introduces the fundamental theories and applications of single-phase motors. Topics include motor theory/operating principles, motor terminology, motor identification, NEMA standards, motor efficiencies, preventive maintenance, troubleshooting/failure analysis, and NEC requirements.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1110", "canonical_url": "/centralgatech/courses/eltr-1110", "markdown_url": "/centralgatech/courses/eltr-1110.md" }, { "id": "centralgatech-000724", "code": "ELTR 1120", "title": "| VARIABLE SPEED/LOW VOLTAGE", "credits": null, "hours": null, "description": "CONTROLS (18-34-2) ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE This course introduces types of electric motor control, reduced voltage starting, and applications. Emphasis will be placed on motor types, controller types, and applications. Includes information on wye and delta motor connections; part wind, autotransformer; adjustable frequency drives and other applications; and oscilloscopes and their operation. Topics include types of reduced voltage starting, reduced voltage motor connections, and adjustable frequency drive.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1120", "canonical_url": "/centralgatech/courses/eltr-1120", "markdown_url": "/centralgatech/courses/eltr-1120.md" }, { "id": "centralgatech-000725", "code": "ELTR 1205", "title": "| RESIDENTIAL WIRING I", "credits": null, "hours": null, "description": "This course introduces residential wiring practices and procedures. Topics include residential circuits, print reading, National Electrical Code, wiring materials, determining the required number and location of lighting/receptacles and small appliance circuits, wiring methods (size and type conductors, box fill calculations and voltage drop), switch control of luminaries, receptacle installation including bonding, GFCI and AFCI circuits, special purposes outlets - ranges, cook tops, ovens, dryers, water heaters, sump pumps, and sizing OCPDs (circuit breakers and fuses).", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001057" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1205", "canonical_url": "/centralgatech/courses/eltr-1205", "markdown_url": "/centralgatech/courses/eltr-1205.md" }, { "id": "centralgatech-000726", "code": "ELTR 1220", "title": "| INDUSTRIAL PLCs", "credits": null, "hours": null, "description": "This course introduces operational theory, systems terminology, PLC installations, and programming procedures for programmable logic controls. Emphasis is placed on PLC programming, connections, installations, and start-up procedures. Topics include PLC hardware and software, PLC functions and terminology, introductory numbering systems, PLC installation and setup, PLC programming basics, relay logic instructions, timers and counters, connecting field devices to I/O cards, and PLC safety procedures. Prerequisite: ELTR 1110, ELTR 1180", "prerequisites": [ "ELTR 1110", "ELTR 1180" ], "program_ids": [ "centralgatech-001007", "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1220", "canonical_url": "/centralgatech/courses/eltr-1220", "markdown_url": "/centralgatech/courses/eltr-1220.md" }, { "id": "centralgatech-000727", "code": "ELTR 1250", "title": "| DIAGNOSTIC TROUBLESHOOTING", "credits": null, "hours": null, "description": "Introduces diagnostic techniques related to electrical malfunctions. Special attention is given to use of safety precautions during troubleshooting. Topics include problem diagnosis, advanced schematics, and sequential troubleshooting procedures.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053", "centralgatech-001059" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1250", "canonical_url": "/centralgatech/courses/eltr-1250", "markdown_url": "/centralgatech/courses/eltr-1250.md" }, { "id": "centralgatech-000728", "code": "ELTR 1260", "title": "| TRANSFORMERS", "credits": null, "hours": null, "description": "This course provides instruction in the theory and operation of specific types of transformers. Emphasis will be placed on National Electrical Code requirements related to the use of transformers. Topics include transformer theory, types of transformers, National Electrical Code requirements, and safety precautions.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1260", "canonical_url": "/centralgatech/courses/eltr-1260", "markdown_url": "/centralgatech/courses/eltr-1260.md" }, { "id": "centralgatech-000729", "code": "ELTR 1500", "title": "| ELECTRICAL SYSTEMS TECHNOLOGY", "credits": null, "hours": null, "description": "INTERNSHIP/PRACTICUM (0-135-3) This course is designed to give students the opportunity to engage in a lab project or an off-site internship for the purpose of refining the skills necessary for gainful employment. The student is expected to have completed all program requirements to this point, and to be able to demonstrate efficiency in all skills mastered. Prerequisite: Advisor Approval", "prerequisites": [], "program_ids": [ "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1500", "canonical_url": "/centralgatech/courses/eltr-1500", "markdown_url": "/centralgatech/courses/eltr-1500.md" }, { "id": "centralgatech-000730", "code": "ELTR 1510", "title": "ELECTRICAL WORKER", "credits": null, "hours": null, "description": "Introduces work hazards present during the construction of manufacturing homes or construction sites. Emphasis is placed on the proper use of electrical tools and equipment and maintenance of these tolls on the work site. Topics include hazards of electricity, safe use electrical tools and equipment, and the repair of electrical cords, plugs, lights, and switches.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1510", "canonical_url": "/centralgatech/courses/eltr-1510", "markdown_url": "/centralgatech/courses/eltr-1510.md" }, { "id": "centralgatech-000731", "code": "ELTR 1520", "title": "| GROUNDING AND BONDING", "credits": null, "hours": null, "description": "This course presents the theory and practical applications for grounding and bonding systems. Emphasis will be placed on the use of the requirements of the National Electrical Code. Topics include branch circuit grounding, equipment grounding/bonding; service grounding/bonding, and earth connections.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1520", "canonical_url": "/centralgatech/courses/eltr-1520", "markdown_url": "/centralgatech/courses/eltr-1520.md" }, { "id": "centralgatech-000732", "code": "ELTR 1525", "title": "| PHOTOVOLTAIC SYSTEMS", "credits": null, "hours": null, "description": "This course introduces techniques and method on how to install residential and commercial photovoltaic systems.", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1525", "canonical_url": "/centralgatech/courses/eltr-1525", "markdown_url": "/centralgatech/courses/eltr-1525.md" }, { "id": "centralgatech-000733", "code": "ELTR 1530", "title": "| CONDUIT SIZING", "credits": null, "hours": null, "description": "Provides practice in calculating conduit size. Emphasis is placed on use of the requirement of the National Electrical Code. Topics include National Electrical Code, conduits types/ trade sizes, and percent of fill. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001052", "centralgatech-001053" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ELTR1530", "canonical_url": "/centralgatech/courses/eltr-1530", "markdown_url": "/centralgatech/courses/eltr-1530.md" }, { "id": "centralgatech-000734", "code": "EMSP 1010", "title": "| EMERGENCY MEDICAL RESPONDER", "credits": null, "hours": null, "description": "(45-45-4) The Emergency Medical Responder (EMR) course prepares the student to provide initial stabilizing care to the sick or injured prior to the arrival of Emergency Medical Services Professionals (EMS), and to assist EMS personnel in transporting patients for definitive care at an appropriate hospital/facility. Major areas of instruction include Introductory Medical Terminology and Anatomy and Physiology; Responder Safety; Incident Command; Bloodborne Pathogen Training; Basic Physical Assessment; and Treatment of Trauma and Medical Emergencies; Cardiopulmonary Resuscitation and the use of Automatic External Defibrillators. The course is a blend of lecture, hands on lab/learning, and practical scenario based learning/ testing. The course will include Healthcare Provider CPR/AED Certification from a Nationally Recognized Body (American Heart Association, Red Cross, etc). If this course is also approved by the Georgia State Office of Emergency Medical Services and Trauma (SOEMST), successful completion will allow the student to be eligible to take the National Registry of Emergency Medical Technicians (NREMT) Emergency Medical Responder (EMR) certification. Topics include: Preparatory; Anatomy and Physiology; Medical Terminology; Pathophysiology; Life Span Development; Public Health; Pharmacology; Airway; Management; Respiration and Artificial Ventilation; Assessment; Medicine; Shock and Resuscitation; Trauma; Special Patient Populations; EMS Operations; and Integration of P", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1010", "canonical_url": "/centralgatech/courses/emsp-1010", "markdown_url": "/centralgatech/courses/emsp-1010.md" }, { "id": "centralgatech-000735", "code": "EMSP 1210", "title": "| EMERGENCY MEDICAL TECHNICIAN", "credits": null, "hours": null, "description": "(EMT) THEORY I (45-0-3) This course serves as the foundational introduction to the Emergency Medical Services (EMS) profession, orienting students to both in-hospital and out-of-hospital prehospital care environments. It covers essential knowledge, skills, and attitudes necessary for effective, safe, ethical, and professional communication and functioning within the EMS environment. Furthermore, the course prepares students to apply pre- hospital emergency care to trauma patients, focusing on injuries from various mechanisms including Abdominal and Genitourinary Trauma, Orthopedic Trauma, Soft Tissue Trauma, Head, Facial, Neck, and Spine Trauma, and Nervous System Trauma. Topics include but not limited to, Anatomy and Physiology, Medical Terminology, Pathophysiology, CPR for HCP , EMS Systems, Research, Workforce Safety and Wellness, Documentation, EMS System Communication, Therapeutic Communication, Medical/Legal and Ethics, Public Health, and Principles of Safely Operating a Ground Ambulance. Additionally, the course introduces students to critical scene management and patient assessment, airway management, and the basics of pharmacology, with topics such as Scene Size-Up, Primary Assessment, History Taking, Secondary Assessment, Monitoring Devices, Reassessment, Airway Management, Respiration, Artificial Ventilation, Principles of Pharmacology, Medication Administration, and Emergency Medications. Prerequisite: Program Admission Co-requisite: EMSP 1211, EMSP 1220, EMSP 122", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1210", "canonical_url": "/centralgatech/courses/emsp-1210", "markdown_url": "/centralgatech/courses/emsp-1210.md" }, { "id": "centralgatech-000736", "code": "EMSP 1211", "title": "| EMERGENCY MEDICAL TECHNICIAN", "credits": null, "hours": null, "description": "(EMT) LAB I (0-60-2) This course allows students to master psychomotor and affective skills required to perform as an EMT. The student must master various skills and assessment from content previous taught within EMSP 1210 using scenario-based learning. The student must demonstrate proficiency in the required skills as dictated by the GA EMS Office, Student Minimum Competencies (SMCs) documents. Prerequisite: Program Admission Co-requisite: EMSP 1210, EMSP 1220, EMSP 1221, EMSP", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1211", "canonical_url": "/centralgatech/courses/emsp-1211", "markdown_url": "/centralgatech/courses/emsp-1211.md" }, { "id": "centralgatech-000737", "code": "EMSP 1220", "title": "| EMERGENCY MEDICAL TECHNICIAN", "credits": null, "hours": null, "description": "(EMT) THEORY II (45-0-3) This course integrates pathophysiological principles and assessment findings to formulate field impressions and implement treatment plans for a wide range of non- traumatic medical emergencies. It provides a comprehensive understanding of medical conditions and patient care across all stages of life, from birth through aging. Topics covered include Medical Overview; Neurology; Abdominal and Gastrointestinal Disorders; Immunology; Infectious Disease; Endocrine Disorders; Psychiatric; Cardiovascular; Toxicology; Respiratory; Hematology; Genitourinary/Renal; Non- Traumatic Musculoskeletal Disorders; Diseases of the Eyes, Ears, Nose, and Throat; Obstetrics; Gynecology; Neonatal Care; Pediatrics; Geriatrics; Patients with Special Challenges; and Special Patient Populations - Assessments. This course equips students with the knowledge and skills necessary to provide effective emergency care and transportation for diverse patient populations, including those with special needs. Prerequisite: Program Admission Co-requisite: EMSP 1210, EMSP 1211, EMSP 1221, EMSP", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1220", "canonical_url": "/centralgatech/courses/emsp-1220", "markdown_url": "/centralgatech/courses/emsp-1220.md" }, { "id": "centralgatech-000738", "code": "EMSP 1221", "title": "| EMERGENCY MEDICAL TECHNICIAN", "credits": null, "hours": null, "description": "(EMT) LAB II (15-60-3) This course builds upon EMSP 1220 and allows students to master the psychomotor and affective skills required to perform as an EMT. Students must master the affective skills and assessments from content previously taught within", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1221", "canonical_url": "/centralgatech/courses/emsp-1221", "markdown_url": "/centralgatech/courses/emsp-1221.md" }, { "id": "centralgatech-000739", "code": "EMSP 1550", "title": "| ADVANCED EMERGENCY MEDICAL", "credits": null, "hours": null, "description": "TECHNICIAN (AEMT) THEORY I (30-0-2) This course builds on the previous EMT program courses and provides a broader depth and breadth of learning to the following topics. It introduces additional topics following the National EMS Education Standards outline the minimal competencies for entry-level EMS clinicians to perform their roles as outlined in the 2021 revisions. Topics Include: EMS System, Public Health, Assessment, Pharmacology. Prerequisite: Program Admission Co-requisite: EMSP 1550L, EMSP 1560, EMSP 1560L, EMSP 1570, EMSP 1580", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1550", "canonical_url": "/centralgatech/courses/emsp-1550", "markdown_url": "/centralgatech/courses/emsp-1550.md" }, { "id": "centralgatech-000740", "code": "EMSP 1550L", "title": "| ADVANCED EMERGENCY MEDICAL", "credits": null, "hours": null, "description": "TECHNICIAN (AEMT) LAB I (30-0-1) This course allows students to master the psychomotor and affective skills required to perform as an AEMT. Students also mast the affective skills of patient communications and assessments using scenario-based learning. The student must demonstrate proficiency in the required skills as dictated by the GA EMS Office, Student Minimum Competences documents. Prerequisite: Program Admission Co-requisite: EMSP 1550, EMSP 1560, EMSP 1560L, EMSP 1570, EMSP 1580", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1550L", "canonical_url": "/centralgatech/courses/emsp-1550l", "markdown_url": "/centralgatech/courses/emsp-1550l.md" }, { "id": "centralgatech-000741", "code": "EMSP 1560", "title": "| ADVANCED EMERGENCY MEDICAL", "credits": null, "hours": null, "description": "TECHNICIAN (AEMT) THEORY II (30-0-2) This course builds on the previous EMT program and EMSP 1550 course and provides a broader depth and breadth of learning to the following topics. It introduces additional topics following the National EMS Education Standards outline the minimal competencies for entry-level EMS clinicians to perform their roles as outlined in the 2021 revisions. Topics Include: Trauma and Special Patient Populations. Prerequisite: Program Admission Co-requisite: EMSP 1550, EMSP 1550L, EMSP 1560L, EMSP 1570, EMSP 1580", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1560", "canonical_url": "/centralgatech/courses/emsp-1560", "markdown_url": "/centralgatech/courses/emsp-1560.md" }, { "id": "centralgatech-000742", "code": "EMSP 1560L", "title": "| ADVANCED EMERGENCY MEDICAL", "credits": null, "hours": null, "description": "TECHNICIAN (AEMT) LAB II (30-0-1) This course builds upon EMSP 1550L and allows students to master the psychomotor and affective skills required to perform as an AEMT. Students also mast the affective skills of patient communications and assessments using scenario- based learning. The student must demonstrate proficiency in the required skills as dictated by the GA EMS Office, Student Minimum Competences documents Prerequisite: Program Admission Co-requisite: EMSP 1550, EMSP 1550L, EMSP 1560, EMSP 1570, EMSP 1580", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1560L", "canonical_url": "/centralgatech/courses/emsp-1560l", "markdown_url": "/centralgatech/courses/emsp-1560l.md" }, { "id": "centralgatech-000743", "code": "EMSP 1570", "title": "| ADVANCED EMERGENCY MEDICAL", "credits": null, "hours": null, "description": "TECHNICIAN CLINICAL (0-90-2) This course provides the student with opportunities to put didactic and lab skills learned into real world environment under the careful direct observation of a clinical preceptor. The minimum number of patient contact hours is dictated by the GA EMS Office, Student Minimum Competencies documents (SMC). Prerequisite: Program Admission Co-requisite: EMSP 1550, EMSP 1550L, EMSP 1560, EMSP 1560L, EMSP 1580", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP1570", "canonical_url": "/centralgatech/courses/emsp-1570", "markdown_url": "/centralgatech/courses/emsp-1570.md" }, { "id": "centralgatech-000744", "code": "EMSP 2100", "title": "| PARAMEDIC FOUNDATIONS", "credits": null, "hours": null, "description": "This course introduces foundational knowledge, skills, and professional behaviors required for paramedic practice. Topics include EMS systems, workforce safety and wellness, research, documentation, communication, legal and ethical considerations, public health, patient assessment, and operational roles. Students will learn to integrate clinical reasoning, team communication, and safety practices in both didactic and lab settings. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2100", "canonical_url": "/centralgatech/courses/emsp-2100", "markdown_url": "/centralgatech/courses/emsp-2100.md" }, { "id": "centralgatech-000745", "code": "EMSP 2101", "title": "| PARAMEDIC PHARMACOLOGY AND", "credits": null, "hours": null, "description": "AIRWAY MANAGEMENT (30-30-3) This course prepares students to safely and effectively manage the pharmacologic and airway needs of patients at the paramedic provider level. Topics include foundational advanced principles of pharmacology, medication administration, and airway management techniques. Students will integrate pathophysiologic concepts and apply clinical reasoning to support pharmacologic interventions and airway/ventilation decisions. Skill development is reinforced through lab and scenario-based practice. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2101", "canonical_url": "/centralgatech/courses/emsp-2101", "markdown_url": "/centralgatech/courses/emsp-2101.md" }, { "id": "centralgatech-000746", "code": "EMSP 2102", "title": "| PARAMEDIC CARDIOLOGY", "credits": null, "hours": null, "description": "This course prepares paramedic students to recognize, assess, and manage cardiovascular conditions in the prehospital environment. Emphasis is placed on ECG interpretation, cardiac electrophysiology, cardiovascular pharmacology, resuscitation practices, and emergency management of cardiac rhythm disturbances. Students will apply evidence- based practices in cardiac care, including team-based resuscitation and advanced cardiac life support procedures. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and ACADEMIC PROGRAMS shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2102", "canonical_url": "/centralgatech/courses/emsp-2102", "markdown_url": "/centralgatech/courses/emsp-2102.md" }, { "id": "centralgatech-000747", "code": "EMSP 2103", "title": "| PARAMEDIC MEDICAL EMERGENCIES", "credits": null, "hours": null, "description": "(75-60-7) This course focuses on the recognition, assessment, and management of medical emergencies across all age groups. Topics include neurological, endocrine, abdominal, immunologic, infectious, toxicologic, genitourinary, and behavioral conditions. Students will integrate pathophysiology and clinical findings to formulate field impressions and initiate appropriate interventions at the paramedic level based on current EMS protocols and evidence-based practices. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2103", "canonical_url": "/centralgatech/courses/emsp-2103", "markdown_url": "/centralgatech/courses/emsp-2103.md" }, { "id": "centralgatech-000748", "code": "EMSP 2104", "title": "| PARAMEDIC TRAUMA CARE", "credits": null, "hours": null, "description": "This course addresses the recognition, assessment, and management of traumatic injuries by the paramedic in the prehospital environment. Emphasis is placed on trauma systems, injury prevention, pathophysiology, and evidence- based treatment strategies for various trauma types including soft tissue, musculoskeletal, abdominal, thoracic, head, spine, and multi-system trauma. Students will develop decision- making skills through simulation and scenario-based practice. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2104", "canonical_url": "/centralgatech/courses/emsp-2104", "markdown_url": "/centralgatech/courses/emsp-2104.md" }, { "id": "centralgatech-000749", "code": "EMSP 2105", "title": "| PARAMEDIC SPECIAL POPULATIONS", "credits": null, "hours": null, "description": "30-3) This course focuses on the unique needs and considerations for special patient populations in the prehospital setting. Topics include assessment and management of pediatric, obstetric, neonatal, and patients with special healthcare needs. The course also addresses abuse and assault, patients with disabilities, palliative care, and those requiring home medical technology. Students will apply patient-centered approaches to diverse situations through scenario-based learning. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic- level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2105", "canonical_url": "/centralgatech/courses/emsp-2105", "markdown_url": "/centralgatech/courses/emsp-2105.md" }, { "id": "centralgatech-000750", "code": "EMSP 2106", "title": "| PARAMEDIC APPLICATIONS", "credits": null, "hours": null, "description": "This capstone course is designed to synthesize, apply, and assess knowledge, skills, and professional behaviors acquired throughout the paramedic program. Students will engage in comprehensive patient simulations, scenario- based learning, clinical reasoning exercises, and team-based care planning. Emphasis is placed on the integration of assessment, pathophysiology, treatment decision-making, leadership, and communication in complex prehospital environments. This course supports final preparation for national certification and paramedic licensure. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2106", "canonical_url": "/centralgatech/courses/emsp-2106", "markdown_url": "/centralgatech/courses/emsp-2106.md" }, { "id": "centralgatech-000751", "code": "EMSP 2201", "title": "| PARAMEDIC EXPERIENCE I", "credits": null, "hours": null, "description": "This course provides supervised clinical and field experiences for paramedic students to apply foundational knowledge and develop core competencies in real-world environments. Students will participate in patient care within a clinical and/or field setting, working alongside licensed healthcare professionals. Emphasis is placed on developing assessment skills, communication, professionalism, teamwork, the safe delivery of patient care, and documentation. Paramedic Experience I is one course in a series of Experience courses; these courses do not need to be taken in sequential order. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2201", "canonical_url": "/centralgatech/courses/emsp-2201", "markdown_url": "/centralgatech/courses/emsp-2201.md" }, { "id": "centralgatech-000752", "code": "EMSP 2202", "title": "| PARAMEDIC EXPERIENCE II", "credits": null, "hours": null, "description": "This course provides supervised clinical and field experiences for paramedic students to apply foundational knowledge and develop core competencies in real-world environments. Students will participate in patient care within a clinical and/or field setting, working alongside licensed healthcare professionals. Emphasis is placed on developing assessment skills, communication, professionalism, teamwork, the safe delivery of patient care, and documentation. Paramedic Experience II is one course in a series of Experience courses; these courses do not need to be taken in sequential order. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2202", "canonical_url": "/centralgatech/courses/emsp-2202", "markdown_url": "/centralgatech/courses/emsp-2202.md" }, { "id": "centralgatech-000753", "code": "EMSP 2203", "title": "| PARAMEDIC EXPERIENCE III", "credits": null, "hours": null, "description": "This course provides supervised clinical and field experiences for paramedic students to apply foundational knowledge and develop core competencies in real-world environments. Students will participate in patient care within a clinical and/or field setting, working alongside licensed healthcare professionals. Emphasis is placed on developing assessment skills, communication, professionalism, teamwork, the safe delivery of patient care, and documentation. Paramedic Experience III is one course in a series of Experience courses; these courses do not need to be taken in sequential order. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2203", "canonical_url": "/centralgatech/courses/emsp-2203", "markdown_url": "/centralgatech/courses/emsp-2203.md" }, { "id": "centralgatech-000754", "code": "EMSP 2204", "title": "| PARAMEDIC EXPERIENCE IV", "credits": null, "hours": null, "description": "This course provides supervised clinical and field experiences for paramedic students to apply foundational knowledge and develop core competencies in real-world environments. Students will participate in patient care within a clinical and/or field setting, working alongside licensed healthcare professionals. Emphasis is placed on developing assessment skills, communication, professionalism, teamwork, the safe delivery of patient care, and documentation. Paramedic Experience IV is one course in a series of Experience courses; these courses do not need to be taken in sequential order. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2204", "canonical_url": "/centralgatech/courses/emsp-2204", "markdown_url": "/centralgatech/courses/emsp-2204.md" }, { "id": "centralgatech-000755", "code": "EMSP 2205", "title": "| PARAMEDIC EXPERIENCE V", "credits": null, "hours": null, "description": "TThis course provides supervised clinical and field experiences for paramedic students to apply foundational knowledge and develop core competencies in real-world environments. Students will participate in patient care within a clinical and/or field setting, working alongside licensed healthcare professionals. Emphasis is placed on developing assessment skills, communication, professionalism, teamwork, the safe delivery of patient care, and documentation. Paramedic Experience V is one course in a series of Experience courses; these courses do not need to be taken in sequential order. This course is designed in accordance with the 2021 National EMS Education Standards and is further guided by both the National EMS Scope of Practice Model and the Georgia Scope of Practice. These scope documents define the clinical and operational expectations for paramedic-level practice and shape the depth and breadth of learning objectives. As scope of practice models are periodically updated, instructional content and assessments are reviewed to ensure alignment with the most current competencies required for safe and effective patient care in Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#EMSP2205", "canonical_url": "/centralgatech/courses/emsp-2205", "markdown_url": "/centralgatech/courses/emsp-2205.md" }, { "id": "centralgatech-000756", "code": "ENGL 0098", "title": "| ENGLISH III", "credits": null, "hours": null, "description": "Emphasizes the ability to communicate using written methods. Topics include writing, grammar, and revising, vocabulary skills, comprehension skills, critical reading skills, study skills, and content area reading skills. Provides instruction in vocabulary and comprehension skills with emphasis on critical reading skills. Prerequisite: Appropriate English placement test score Co-requisite: ENGL 1101", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL0098", "canonical_url": "/centralgatech/courses/engl-0098", "markdown_url": "/centralgatech/courses/engl-0098.md" }, { "id": "centralgatech-000757", "code": "ENGL 2130", "title": "| AMERICAN LITERATURE", "credits": null, "hours": null, "description": "This course emphasizes American literature as a reflection of culture and ideas. A survey of important works in American literature which includes a variety of literary genres: short stories, poetry, drama, nonfiction, and novels. Topics include literature and culture, essential themes and ideas, literature and history, and research skills. Prerequisite: ENGL 1101 with a grade of C or better Engineering Technology", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGL2130", "canonical_url": "/centralgatech/courses/engl-2130", "markdown_url": "/centralgatech/courses/engl-2130.md" }, { "id": "centralgatech-000758", "code": "ENGT 1000", "title": "| INTRODUCTION TO ENGINEERING", "credits": null, "hours": null, "description": "TECHNOLOGY (30-45-3) Provides a study of engineering technology as a career field and describes the knowledge and skills required for academic and occupational success. Topics include: engineering technology career, measurement and standards, mathematical operators, engineering tools, and engineering concepts. Labs reinforce mathematical, mechanical and electrical concepts through practical exercises, such as measurement and calculation of density of objects, relative humidity, use of digital multi-meter, building circuits, use of precision instruments, and team exercises. Prerequisite: Provisional Admission: Associate degree-level math placement scores", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001065", "centralgatech-001066", "centralgatech-001067", "centralgatech-001068", "centralgatech-001069", "centralgatech-001070" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ENGT1000", "canonical_url": "/centralgatech/courses/engt-1000", "markdown_url": "/centralgatech/courses/engt-1000.md" }, { "id": "centralgatech-000759", "code": "HORT 1000", "title": "| HORTICULTURE SCIENCE", "credits": null, "hours": null, "description": "Introduces the fundamentals of plant science and horticulture as a career field. Emphasis will be placed on an industry overview; plant morphology; plant physiology; environmental factors affecting horticulture practices; soil physical and chemical properties; fertilizer elements and analysis; and basic propagation techniques. Prerequisite: None", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1000", "canonical_url": "/centralgatech/courses/hort-1000", "markdown_url": "/centralgatech/courses/hort-1000.md" }, { "id": "centralgatech-000760", "code": "HORT 1050", "title": "| NURSERY PRODUCTION", "credits": null, "hours": null, "description": "Develops skills necessary to propagate and produce both container and field grown nursery stock. Topics include: industry overview, facility design, propagation techniques and environment, field grown and container production, and managerial functions for nursery production. Prerequisite: None", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1050", "canonical_url": "/centralgatech/courses/hort-1050", "markdown_url": "/centralgatech/courses/hort-1050.md" }, { "id": "centralgatech-000761", "code": "HORT 1070", "title": "| LANDSCAPE INSTALLATION", "credits": null, "hours": null, "description": "This course develops skills needed for the proper selection, installation, and establishment of landscape trees, shrubs, groundcovers, turf, and flowers. Topics include workplace safety, interpreting a landscape plan, soil preparation, planting methods, post care and establishment, and managerial functions for landscape installers. Prerequisite: None", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1070", "canonical_url": "/centralgatech/courses/hort-1070", "markdown_url": "/centralgatech/courses/hort-1070.md" }, { "id": "centralgatech-000762", "code": "HORT 1080", "title": "| PEST MANAGEMENT", "credits": null, "hours": null, "description": "This course provides an introduction to the principles and mechanisms of integrated pest management across a diverse array of pests including insects, weeds, plant pathogens, nematodes and vertebrates. Specifically, the course will provide students with a fundamental and practical understanding of integrated pest management in a landscape setting with emphasis on pest identification and control; pesticide application safety; and legal requirements for state licensure. Prerequisite: None", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HORT1080", "canonical_url": "/centralgatech/courses/hort-1080", "markdown_url": "/centralgatech/courses/hort-1080.md" }, { "id": "centralgatech-000763", "code": "FRSC 1020", "title": "| BASIC FIREFIGHTER - EMERGENCY", "credits": null, "hours": null, "description": "SERVICES FUNDAMENTALS (30-30-3) This course provides the student with information on the applicable laws, policies, and standards that the Firefighter I course is designed, and how the course will be administered. This course will provide the student basic knowledge of where and how the fire service originated from the colonial periods to present day firefighting operations. The student will learn basic roles and responsibilities of a firefighter, how firefighters have to abide by and work from standard operating procedures and guidelines, and how the chain of command works and their position within it. The student will be provided the knowledge on how to communicate within the fire service; whether it with the fire station or on the fire ground. This course provides the emergency responder with basic principles and functions of the Incident Command System. The course will provide the necessary knowledge and skills to operate within the ICS and their role within the ICS at the fire station, at a non-emergency scene, and at emergency scenes. It will provide also provide the emergency responder with knowledge on how to perform basic skills at emergency scenes that deal with infection control, cardiopulmonary resuscitation, basic first aid measures, and using an AED. Finally, it will provide the emergency responder skills and knowledge on how to recognize the presence of and the potential for a hazardous materials release, and how and who personnel should call. Upon completion o", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FRSC1020", "canonical_url": "/centralgatech/courses/frsc-1020", "markdown_url": "/centralgatech/courses/frsc-1020.md" }, { "id": "centralgatech-000764", "code": "FRSC 1030", "title": "| BASIC FIREFIGHTER - MODULE I", "credits": null, "hours": null, "description": "This course provides the firefighter candidate/recruit with basic knowledge and skills to perform various fire ground operations as a firefighter on emergency scenes. The candidate/recruit will learn about safety during all phases of a firefighters career, the personal protective equipment that is required for training and every emergency response, and how to properly don it for use and doff it after use. The candidate/recruit will learn about the dynamics of fire through fire behavior and how to extinguish the different phases of fires with either portable fire extinguishers or through fire suppression attacks and techniques. The candidate/recruit will also learn the three tactical priorities of Life Safety, Incident Stabilization, and Property Conservation that have to be achieved on every fireground. Basic knowledge and skills will be provided to the candidate/recruit so they can achieve the tactical priorities through various fireground operations such as: response & size-up, forcible entry, ladders, search & rescue, ventilation, water supply, fire hose, fire nozzles, fire streams, salvage, and overhaul. Upon completion of this course the student emergency responder candidate/recruit will have the basic skills and knowledge to be able to obtain a certificate of completion or become certified through the appropriate governing agency for the following: 1. Module I This course meets the requirements NFPA 1001 Standard for Fire Fighter Professional Qualifications and all othe", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FRSC1030", "canonical_url": "/centralgatech/courses/frsc-1030", "markdown_url": "/centralgatech/courses/frsc-1030.md" }, { "id": "centralgatech-000765", "code": "FRSC 1040", "title": "| BASIC FIREFIGHTER - MODULE II", "credits": null, "hours": null, "description": "This course builds from the skills and knowledge in Module I and provides the knowledge and skills to support the fireground techniques learned in the previous courses. The firefighter will learn various uses of ropes & knots and how to hoist firefighting tools and equipment. The firefighter will also gain the knowledge and skills of building construction principles that will be used throughout their firefighting career to identify building conditions such as: fire spread and travel, how and where to ventilate, indications of potential building collapse, etc. The firefighter will learn survival techniques that will be used throughout their career to help keep themselves safe and how to rescue themselves or another firefighter. Firefighter rehabilitation will be discussed during this course, so that the firefighter will know how and when to properly rehab themselves before, during, after an emergency response. Knowledge of fire suppression systems will be discussed, so that the firefighter will have a basic understanding of the components of a fire detection, protection, and suppression system. Basic cause determination will be discussed so that firefighters will be aware of observations during various phases of fireground operations. Finally to complete the Firefighter I program the firefighter will participate in the following live fire scenarios in order to complete the objectives of the program. 1. Exterior Class A Fire 2. Interior Structure Attack above Grade Level 3. Int", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FRSC1040", "canonical_url": "/centralgatech/courses/frsc-1040", "markdown_url": "/centralgatech/courses/frsc-1040.md" }, { "id": "centralgatech-000766", "code": "CFR 1910", "title": "120, EPA, USDOT, and all other appropriate state", "credits": null, "hours": null, "description": "local and provincial occupational health and safety regulatory requirements. Prerequisite: Program Admission; NPQ FF I and NPQ Hazardous Materials Awareness Level Forensic Science", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#CFR1910", "canonical_url": "/centralgatech/courses/cfr-1910", "markdown_url": "/centralgatech/courses/cfr-1910.md" }, { "id": "centralgatech-000767", "code": "FOSC 2037", "title": "| VICTIMOLOGY", "credits": null, "hours": null, "description": "While individuals have been crime victims for many years, victimology or the study of crime victims is a relatively recent discipline. The majority of criminological research and discussion has been focused on the offender rather than the victim. This course provides an overview of the principles and concepts of victimology, an analysis of victimization patterns and trends, and the role of victimology in the justice system. In addition the repercussions of victimization, victim reporting patterns and remedies available for victims are also explored. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#FOSC2037", "canonical_url": "/centralgatech/courses/fosc-2037", "markdown_url": "/centralgatech/courses/fosc-2037.md" }, { "id": "centralgatech-000768", "code": "GERT 1000", "title": "| UNDERSTANDING THE GERONTOLOGICAL", "credits": null, "hours": null, "description": "ACADEMIC PROGRAMS CLIENT (30-0-2) This course provides a description of the aging client in the aging services network as well as an examination of sociological, psychological, and biological aspects of aging.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#GERT1000", "canonical_url": "/centralgatech/courses/gert-1000", "markdown_url": "/centralgatech/courses/gert-1000.md" }, { "id": "centralgatech-000769", "code": "GERT 1020", "title": "| BEHAVIORAL ASPECTS OF AGING", "credits": null, "hours": null, "description": "This course addresses behavioral health issues associated with aging, including psycho-social impact of cultural and cohort influences; a discussion of prevention, diagnosis, assessment, and intervention; as well as an examination of pertinent legislation.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#GERT1020", "canonical_url": "/centralgatech/courses/gert-1020", "markdown_url": "/centralgatech/courses/gert-1020.md" }, { "id": "centralgatech-000770", "code": "HECT 1100", "title": "| HEMODIALYSIS PATIENT CARE", "credits": null, "hours": null, "description": "This course will focus on the theoretical and clinical aspects of hemodialysis, including the duties and responsibilities essential to the delivery of patient care in the chronic outpatient setting. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HECT1100", "canonical_url": "/centralgatech/courses/hect-1100", "markdown_url": "/centralgatech/courses/hect-1100.md" }, { "id": "centralgatech-000771", "code": "HIMT 1151", "title": "| COMPUTER APPLICATIONS IN", "credits": null, "hours": null, "description": "HEALTHCARE (15-90-4) Designed to provide students with computer and software skills used in medical offices. Topics include hardware and software components of computers for medical record applications; database software and information management; specialized information management systems in healthcare; methods of controlling confidentiality and patient rights; accuracy and security of health information data in computer systems as well as future directions of information technology in healthcare.", "prerequisites": [], "program_ids": [ "centralgatech-001101", "centralgatech-001103", "centralgatech-001104", "centralgatech-001105" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIMT1151", "canonical_url": "/centralgatech/courses/himt-1151", "markdown_url": "/centralgatech/courses/himt-1151.md" }, { "id": "centralgatech-000772", "code": "HIST 1112", "title": "| WORLD HISTORY II", "credits": null, "hours": null, "description": "This course emphasizes the study of the intellectual, cultural, scientific, political, and social contributions of the civilizations of the world and the evolution of these civilizations during the period from early modern times to the present. Topics include transitions to the Modern World, scientific revolution and the Enlightenment, political modernization, economic modernization, imperialism, and the Twentieth Century. Prerequisite: Appropriate Degree-Level English and Reading Placement Test Scores", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIST1112", "canonical_url": "/centralgatech/courses/hist-1112", "markdown_url": "/centralgatech/courses/hist-1112.md" }, { "id": "centralgatech-000773", "code": "HIST 2112", "title": "| U.S. HISTORY II", "credits": null, "hours": null, "description": "Emphasizes the study of the social, cultural, and political history of the United States from 1865 to the beginning of the twenty-first century and will equip the student to better understand the problems and challenges of the contemporary world in relation to events and trends in modern American history. The course also provides an overview of the history of Georgia and the development of its constitution. Topics include the Reconstruction Period; the great West, the new South, and the rise of the debtor; the Gilded Age; the progressive movement; the emergence of the U. S. in world affairs; the Roaring Twenties; the Great Depression; World War I; World War II; the Cold War and the 1950’s; the Civil Rights Movement; the 1960’s and 1970’s; and America since 1980. Prerequisite: Appropriate Degree Level English and Reading Placement Test Scores Hospitality", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001072" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HIST2112", "canonical_url": "/centralgatech/courses/hist-2112", "markdown_url": "/centralgatech/courses/hist-2112.md" }, { "id": "centralgatech-000774", "code": "HOSP 1301", "title": "HOSPITALITY INDUSTRY ENVIRONMENT", "credits": null, "hours": null, "description": "(30-0-2) This course provides an introduction to the hospitality industry. Students understand the spirit of hospitality, the ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE work ethic required for exceptional customer service, the value that each worker adds to the work team, and the principles of quality service. Students also become aware of their local community and its hospitality offerings. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HOSP1301", "canonical_url": "/centralgatech/courses/hosp-1301", "markdown_url": "/centralgatech/courses/hosp-1301.md" }, { "id": "centralgatech-000775", "code": "HOSP 1321", "title": "CUSTOMER SERVICE SKILLS", "credits": null, "hours": null, "description": "This course provides an understanding of the service environment and the skills required of a guestroom attendant to serve food and beverages and to provide table service. Participants also learn how to communicate effectively with customers, how to manage relationships in face-to-face situations, and how to address difficult customers. Students also learn to value and relate to customers with special needs. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HOSP1321", "canonical_url": "/centralgatech/courses/hosp-1321", "markdown_url": "/centralgatech/courses/hosp-1321.md" }, { "id": "centralgatech-000776", "code": "HOSP 1361", "title": "TECHNOLOGY OF SERVICES", "credits": null, "hours": null, "description": "This course introduces the basic computer skills related to word processing and spreadsheets. Students are introduced to point-of-sale terms and are acquainted with basic office technology. Students also gain an understanding of e-commerce. Prerequisite: None Hotel/Restaurant/Travel Management", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HOSP1361", "canonical_url": "/centralgatech/courses/hosp-1361", "markdown_url": "/centralgatech/courses/hosp-1361.md" }, { "id": "centralgatech-000777", "code": "HRTM 1100", "title": "| INTRODUCTION TO HOTEL, RESTAURANT", "credits": null, "hours": null, "description": "AND TOURISM MANAGEMENT (45-0-3) This course provides the student with an overview of occupations in the hospitality industry. Emphasizes the various segments of each occupation and the interrelated responsibilities for customer service which exist across the hospitality industry. Topics include: development of the hospitality industry, food and beverage services, hotel services, meeting and convention services, management’s role in the hospitality industry, and hospitality industry trends. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1100", "canonical_url": "/centralgatech/courses/hrtm-1100", "markdown_url": "/centralgatech/courses/hrtm-1100.md" }, { "id": "centralgatech-000778", "code": "HRTM 1105", "title": "| TOURISM IN GEORGIA", "credits": null, "hours": null, "description": "This course focuses on the ways tourism impacts the state of Georgia. Topics include regional, historical, cultural, and culinary tourism; how welcome centers and convention and visitors bureaus market the state; career opportunities within the tourism industry; and the variety of reasons tourists come to Georgia.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1105", "canonical_url": "/centralgatech/courses/hrtm-1105", "markdown_url": "/centralgatech/courses/hrtm-1105.md" }, { "id": "centralgatech-000779", "code": "HRTM 1115", "title": "| TRAVEL INDUSTRY AND TRAVEL", "credits": null, "hours": null, "description": "GEOGRAPHY - INTERNATIONAL (45-0-3) Introduces students to the importance of the travel agent in the hospitality industry and provides an understanding of international, national, state, major cities and their points of interest to the travel customer. Emphasis is placed on career options, industry trends, and travel documents, identifying why people travel and how geography is linked to their needs. Topics include: terminology, agency operations, travel reference guides, airline industry, other transportation modes, hotels and resorts, individual travel needs, travel and tourism careers, miscellaneous services, geographical and physical aspects of the Americas and Greenland, Europe, Middle East and Africa, Far East, Australia, New Zealand and Pacific Islands, and travel regulations and documents needed to travel internationally. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1115", "canonical_url": "/centralgatech/courses/hrtm-1115", "markdown_url": "/centralgatech/courses/hrtm-1115.md" }, { "id": "centralgatech-000780", "code": "HRTM 1120", "title": "| TOUR AND CRUISE MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course provides students with an orientation to the duties and responsibilities of the tour operator and an overview of the cruise industry. The course also gives students an opportunity to gain the technical knowledge and skills needed to utilize computerized reservation and information systems. Emphasis is placed on the operator’s role in planning and conducting tours and cruises as well as accessing data bases and identifying options which satisfy customer’s needs. Topics include planning individual tours, planning group tours, transportation arrangements, accommodation options, entertainment options, foreign country tours, and manager’s on-tour responsibilities on the ship, living quarters, amenities, shipboard activities and marketing, selling of cruises, agency computer hardware, computer reservation systems, automated travel information, back-room accounting, and trends in automated travel data systems. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1120", "canonical_url": "/centralgatech/courses/hrtm-1120", "markdown_url": "/centralgatech/courses/hrtm-1120.md" }, { "id": "centralgatech-000781", "code": "HRTM 1130", "title": "| BUSINESS ETIQUETTE AND", "credits": null, "hours": null, "description": "COMMUNICATION (45-0-3) This course focuses on professionalism in a variety of business settings. Topics include professional image and conduct at work, telephone etiquette, table manners, oral and written communication skills, and diversity in the hospitality industry. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1130", "canonical_url": "/centralgatech/courses/hrtm-1130", "markdown_url": "/centralgatech/courses/hrtm-1130.md" }, { "id": "centralgatech-000782", "code": "HRTM 1140", "title": "| HOTEL OPERATIONS MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course focuses on the organization and management of lodging operations. It covers day-to-day operations of each department in a hotel and helps students to understand what seasoned managers do. Emphasis is placed on the rooms division. Topics include corporate structures, departmental responsibilities, hotel services and staff, decision making, and industry trends. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1140", "canonical_url": "/centralgatech/courses/hrtm-1140", "markdown_url": "/centralgatech/courses/hrtm-1140.md" }, { "id": "centralgatech-000783", "code": "HRTM 1150", "title": "| EVENT PLANNING", "credits": null, "hours": null, "description": "This course introduces students to event planning requirements. Topics include fundamentals of event planning; selecting event dates and venues; developing agendas, time lines, budgets, and contracts; marketing events, and facilitating events. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1150", "canonical_url": "/centralgatech/courses/hrtm-1150", "markdown_url": "/centralgatech/courses/hrtm-1150.md" }, { "id": "centralgatech-000784", "code": "HRTM 1160", "title": "| FOOD AND BEVERAGE MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) ACADEMIC PROGRAMS This course provides students with a study of food and beverage operations and management. Emphasis is placed on the successful operation of a food and beverage establishment. Topics include restaurants, owners, locations, and concepts; business plans, financing, and legal and tax matters; menus, kitchens, and purchasing; restaurant operations and management. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1160", "canonical_url": "/centralgatech/courses/hrtm-1160", "markdown_url": "/centralgatech/courses/hrtm-1160.md" }, { "id": "centralgatech-000785", "code": "HRTM 1170", "title": "| HOSPITALITY , INDUSTRY ACCOUNTING", "credits": null, "hours": null, "description": "AND FINANCIAL ANALYSIS (45-0-3) This course provides students with the fundamental knowledge to interpret and analyze the key reports and financial statements used daily in the hospitality industry. Focusing on profit and loss statements, students learn to use numbers to assess the performance of individual departments and the overall operation. These numbers are the basis for managerial decisions that increase revenue and control costs. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#HRTM1170", "canonical_url": "/centralgatech/courses/hrtm-1170", "markdown_url": "/centralgatech/courses/hrtm-1170.md" }, { "id": "centralgatech-000786", "code": "ICET 2040", "title": "| FUNDAMENTALS OF PRESSURE", "credits": null, "hours": null, "description": "TEMPERATURE, FLOW, AND LEVEL (60-30-5) An introduction to the concepts of pressure, level, flow, and temperature calculations and conversions; operating principles of indicators, recorders, transmitters, and transducers; measure pressure, level, flow, and temperature using various indicators and recorders; develop troubleshooting techniques for various devices.", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ICET2040", "canonical_url": "/centralgatech/courses/icet-2040", "markdown_url": "/centralgatech/courses/icet-2040.md" }, { "id": "centralgatech-000787", "code": "ICET 2060", "title": "| INSTRUMENTATION MAINTENANCE AND", "credits": null, "hours": null, "description": "CALIBRATION (45-75-5) This course introduces methodology into maintenance procedures for various process control systems that will include preventive and predictive methodologies. This course also provides an in-depth study of calibration theory, procedures, and techniques using diverse associated test equipment. Prerequisite: ICET 2040", "prerequisites": [ "ICET 2040" ], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ICET2060", "canonical_url": "/centralgatech/courses/icet-2060", "markdown_url": "/centralgatech/courses/icet-2060.md" }, { "id": "centralgatech-000788", "code": "ICET 2080", "title": "| FINAL CONTROL ELEMENTS", "credits": null, "hours": null, "description": "This course includes principles of operation, calibration, servicing, troubleshooting, repair and replacement of actuators/control valves. Prerequisite: IDSY 2800 Industrial Fundamentals", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ICET2080", "canonical_url": "/centralgatech/courses/icet-2080", "markdown_url": "/centralgatech/courses/icet-2080.md" }, { "id": "centralgatech-000789", "code": "IDFC 1012", "title": "| ALTERNATING CURRENT I", "credits": null, "hours": null, "description": "This course introduces the theory and application of varying sine wave voltages and current. Topics include magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers. Co-requisite: IDFC 1011", "prerequisites": [], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001010", "centralgatech-001014", "centralgatech-001053", "centralgatech-001057", "centralgatech-001071", "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDFC1012", "canonical_url": "/centralgatech/courses/idfc-1012", "markdown_url": "/centralgatech/courses/idfc-1012.md" }, { "id": "centralgatech-000790", "code": "IDSY 1011", "title": "| Industrial Computer Applications", "credits": null, "hours": null, "description": "This course provides a foundation in industrial computers and computer systems with a focus in linking computers to the plant floor process. Topics include: hardware, software, boot sequence, configuration, troubleshooting, and communications platforms.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1011", "canonical_url": "/centralgatech/courses/idsy-1011", "markdown_url": "/centralgatech/courses/idsy-1011.md" }, { "id": "centralgatech-000791", "code": "IDSY 1020", "title": "| PRINT READING AND PROBLEM SOLVING", "credits": null, "hours": null, "description": "(30-45-3) This course introduces practical problem solving techniques as practiced in an industrial setting. Topics include analytical problem solving, troubleshooting techniques, reading blueprints and technical diagrams, schematics and symbols, specifications and tolerances. The course emphasizes how the machine or mechanical system works, reading and engineering specifications and applying a systematic approach to solving the problem. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001006" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1020", "canonical_url": "/centralgatech/courses/idsy-1020", "markdown_url": "/centralgatech/courses/idsy-1020.md" }, { "id": "centralgatech-000792", "code": "IDSY 1112", "title": "| MOTOR CONTROLS I", "credits": null, "hours": null, "description": "This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls, theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting. Prerequisite: IDSY 1101, IDSY 1105", "prerequisites": [ "IDSY 1101", "IDSY 1105" ], "program_ids": [ "centralgatech-001003", "centralgatech-001004", "centralgatech-001005", "centralgatech-001006", "centralgatech-001008", "centralgatech-001013", "centralgatech-001014", "centralgatech-001015", "centralgatech-001017", "centralgatech-001059", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1112", "canonical_url": "/centralgatech/courses/idsy-1112", "markdown_url": "/centralgatech/courses/idsy-1112.md" }, { "id": "centralgatech-000793", "code": "IDSY 1150", "title": "| DC AND AC MOTORS", "credits": null, "hours": null, "description": "Introduces the fundamental theories and applications of single-phase and three-phase motors. Topics include: motor theory and operating principles, motor terminology, motor identification, NEMA standards, AC motors, DC motors, scheduled preventive maintenance, and troubleshooting and failure analysis.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1150", "canonical_url": "/centralgatech/courses/idsy-1150", "markdown_url": "/centralgatech/courses/idsy-1150.md" }, { "id": "centralgatech-000794", "code": "IDSY 1160", "title": "| MECHANICAL LAWS AND PRINCIPLES", "credits": null, "hours": null, "description": "(45-45-4) Introduces the student to fundamental laws and principles of mechanics. Topics include mechanical principles of simple machines; force, torque, velocity, acceleration, and inertia; rotational motion; work, power, and energy; matter; gases; fluid power; and heat. The course emphasizes understanding terminology and using related problem solving skills in everyday physical applications of mechanical technology. Competencies are reinforced with practical hands on lab exercises. Prerequisite: MATH 1012", "prerequisites": [ "MATH 1012" ], "program_ids": [ "centralgatech-001006" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1160", "canonical_url": "/centralgatech/courses/idsy-1160", "markdown_url": "/centralgatech/courses/idsy-1160.md" }, { "id": "centralgatech-000795", "code": "IDSY 1171", "title": "| INDUSTRIAL MECHANICS", "credits": null, "hours": null, "description": "This course introduces and emphasizes the basic skill necessary for mechanical maintenance personnel. Instruction is also provided in the basic physics concepts applicable to the mechanics of industrial production equipment, and the application of mechanical principles with additional emphasis on power transmission and specific mechanical components.", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001006", "centralgatech-001011", "centralgatech-001012", "centralgatech-001016" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1171", "canonical_url": "/centralgatech/courses/idsy-1171", "markdown_url": "/centralgatech/courses/idsy-1171.md" }, { "id": "centralgatech-000796", "code": "IDSY 1180", "title": "| MAGNETIC STARTERS AND BRAKING", "credits": null, "hours": null, "description": "(15-60-3) This course provides instruction in wiring motor control circuits. Emphasis is placed on designing and installing magnetic starters in across-the-line, reversing, jogging circuits, and motor braking. Topics include control transformers, full voltage starters, reversing circuits, jogging circuits, and braking.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1180", "canonical_url": "/centralgatech/courses/idsy-1180", "markdown_url": "/centralgatech/courses/idsy-1180.md" }, { "id": "centralgatech-000797", "code": "IDSY 1181", "title": "| FLUID POWER SYSTEMS", "credits": null, "hours": null, "description": "This course provides instruction in the fundamentals of safely operating hydraulic and pneumatic systems. Theory and practical application concepts are discussed. Topics include hydraulic system principles and components and pneumatic system principles and components. Prerequisite: VECTR Students Only: Completion of job shadowing requirement.", "prerequisites": [], "program_ids": [ "centralgatech-001004", "centralgatech-001006", "centralgatech-001011", "centralgatech-001012", "centralgatech-001016", "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1181", "canonical_url": "/centralgatech/courses/idsy-1181", "markdown_url": "/centralgatech/courses/idsy-1181.md" }, { "id": "centralgatech-000798", "code": "IDSY 1260", "title": "| MACHINE TOOL FOR INDUSTRIAL REPAIRS", "credits": null, "hours": null, "description": "(30-75-4) Provides Industrial Mechanics the basic machine shop skills to perform common mechanical repairs such as: repair of scored pump shafts, motor shafts, conveyor shafts or valve stems; repair or fabrication of support brackets; fabrication of simple shaped (cylindrical or rectangular) parts; making or repairing keyseats and keys.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1260", "canonical_url": "/centralgatech/courses/idsy-1260", "markdown_url": "/centralgatech/courses/idsy-1260.md" }, { "id": "centralgatech-000799", "code": "IDSY 1310", "title": "| INDUSTRIAL SYSTEMS REVIEW", "credits": null, "hours": null, "description": "This course provides an instructional review of the Industrial Maintenance Technology course of study with a comprehensive assessment of each area. The assessment will consist of a written, identification, and hands-on examination. Topics include direct current, alternating current, industrial wiring, AC-DC motors, motor controls, industrial hydraulics, industrial pneumatics, industrial mechanics, welding, safety, and programmable logic controllers. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY1310", "canonical_url": "/centralgatech/courses/idsy-1310", "markdown_url": "/centralgatech/courses/idsy-1310.md" }, { "id": "centralgatech-000800", "code": "IDSY 2750", "title": "| HUMAN MACHINE INTERFACE", "credits": null, "hours": null, "description": "Provides hand-on development of Programming skills for industrial HMI components used automated industrial systems. Emphasis is placed on applying skills developed in previous courses in programmable logic controls (PLCs) in an industrial setting. This course includes advanced skills and techniques the student can apply to HMI applications in an industrial environment. Prerequisite:", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2750", "canonical_url": "/centralgatech/courses/idsy-2750", "markdown_url": "/centralgatech/courses/idsy-2750.md" }, { "id": "centralgatech-000801", "code": "IDSY 2800", "title": "| ADVANCED PROCESS CONTROL", "credits": null, "hours": null, "description": "Teaches advanced process control skills to include Process control drawings, PID control, advanced loops and tuning, Process controllers, DCS systems, and SCADA systems. The student will be introduced to the fundamentals, devices and methods use in todays advanced process systems.", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2800", "canonical_url": "/centralgatech/courses/idsy-2800", "markdown_url": "/centralgatech/courses/idsy-2800.md" }, { "id": "centralgatech-000802", "code": "IDSY 2830", "title": "| NETWORKING INDUSTRIAL EQUIPMENT", "credits": null, "hours": null, "description": "(30-75-4) Provides communication and networking skills needed for cabling and connection to PLC/HMI Devices.", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2830", "canonical_url": "/centralgatech/courses/idsy-2830", "markdown_url": "/centralgatech/courses/idsy-2830.md" }, { "id": "centralgatech-000803", "code": "IDSY 2850", "title": "| INDUSTRIAL GRAPHICAL", "credits": null, "hours": null, "description": "COMMUNICATION (30-75-4) Provides hands on experience in the development and implementation of graphical computer based HMI (Human- Machine Interfaces) for control of automated machines and industrial manufacturing systems. This course is built on the user’s knowledge/familiarity of programmable logic controls (PLCs) and demonstrates the capabilities and economic impact of PC based controls systems. The manufacturing industry’s demand for low cost automated solutions has pushed the desktop PC into the plant floor. Areas such as front end creation, I/O assignments and communications, alarming, and acknowledgment, data trending and more are covered and explored throughout the course. Prerequisite: IDSY 1120 Logistics", "prerequisites": [], "program_ids": [ "centralgatech-001003" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#IDSY2850", "canonical_url": "/centralgatech/courses/idsy-2850", "markdown_url": "/centralgatech/courses/idsy-2850.md" }, { "id": "centralgatech-000804", "code": "LOGI 1000", "title": "| BUSINESS LOGISTICS", "credits": null, "hours": null, "description": "This course provides a general knowledge of current management practices in logistics management. The focuses of the course will be on planning, organizing, and controlling of these activities, key elements for successful management in any organization. The course will also introduce student to Transport, Inventory, and Location strategies, Customer Service Goals and Organization and Control. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001141", "centralgatech-001142", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LOGI1000", "canonical_url": "/centralgatech/courses/logi-1000", "markdown_url": "/centralgatech/courses/logi-1000.md" }, { "id": "centralgatech-000805", "code": "LOGI 1010", "title": "| Purchasing", "credits": null, "hours": null, "description": "Provides a general knowledge of purchasing for today’s Supply Chains. The student will be introduced to Cross- functional teaming, Purchasing and Supply Performance, Supplier Integration into new Product Development, Supplier Development, Strategic Cost Management and Total Ownership Cost (TOC), and many other topics. This course along with other Supply Chain based courses will give the student the foundation needed to make a difference in obtaining low costs, quality products for their organizations. Prerequisite: LOGI 1000", "prerequisites": [ "LOGI 1000" ], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001141", "centralgatech-001142" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LOGI1010", "canonical_url": "/centralgatech/courses/logi-1010", "markdown_url": "/centralgatech/courses/logi-1010.md" }, { "id": "centralgatech-000806", "code": "LOGI 1020", "title": "| MATERIALS MANAGEMENT", "credits": null, "hours": null, "description": "This course will introduce students to materials Management by learning the planning production process, master scheduling, material requirements, and forecasting material demands and inventory levels. This course is designed to build on the students’ knowledge of supply chains and how effective material management improves supply chain performance. Prerequisite: LOGI 1000 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Medical Assisting", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001141" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LOGI1020", "canonical_url": "/centralgatech/courses/logi-1020", "markdown_url": "/centralgatech/courses/logi-1020.md" }, { "id": "centralgatech-000807", "code": "MAST 1010", "title": "| LEGAL AND ETHICAL CONCERNS IN THE", "credits": null, "hours": null, "description": "MEDICAL OFFICE (30-0-2) This course introduces the basic concept of medical assisting and its relationship to the other health fields; emphasizes medical ethics, legal aspects of medicine, and the medical assistant’s role as an agent of the physician. Provides the student with knowledge of medical jurisprudence and the essentials of professional behavior. Topics include: introduction to medical assisting; introduction to medical law; physician/patient/assistant relationship; medical office in litigation; as well as ethics, bioethical issues and HIPAA. Prerequisite: Program Admission Co-requisite: MAST 1090, MAST 1110, MAST 1120", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1010", "canonical_url": "/centralgatech/courses/mast-1010", "markdown_url": "/centralgatech/courses/mast-1010.md" }, { "id": "centralgatech-000808", "code": "MAST 1030", "title": "| PHARMACOLOGY IN THE MEDICAL", "credits": null, "hours": null, "description": "OFFICE (60-0-4) This course introduces medication therapy with emphasis on safety; classification of medications; their actions; side effects; medication and food interactions and adverse reactions. Also introduces basic methods of arithmetic used in the administration of medications. Topics include: introductory pharmacology; dosage calculation; sources and forms of medications; medication classification; and medication effects on the body systems. Prerequisite: MATH 1012 or MATH 11xx; ALHS 1011 or BIOL 2113; BIOL 2113L; BIOL 2114; BIOL 2114L Co-requisite: MAST 1060, MAST 1080", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1030", "canonical_url": "/centralgatech/courses/mast-1030", "markdown_url": "/centralgatech/courses/mast-1030.md" }, { "id": "centralgatech-000809", "code": "MAST 1080", "title": "| MEDICAL ASSISTING SKILLS I", "credits": null, "hours": null, "description": "This course introduces the skills necessary for assisting the physician with a complete history and physical in all types of medical practices. The course includes skills necessary for sterilizing instruments and equipment and setting up sterile trays. The student also explores the theory and practice of electrocardiography. Topics include: infection control and related OSHA guidelines; prepare patients/assist physician with age and gender-specific examinations and diagnostic procedures; vital signs/mensuration; respiratory evaluations; medical office surgical procedures; and electrocardiography. Prerequisite: ALHS 1011 or BIOL 2113; BIOL 2113L; BIOL 2114; BIOL 2114L; ALHS 1090; PSYC 1010 or PSYC 1101 Co-requisite: MAST 1030, MAST 1060 Semesters Offered: Fall/ Spring", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1080", "canonical_url": "/centralgatech/courses/mast-1080", "markdown_url": "/centralgatech/courses/mast-1080.md" }, { "id": "centralgatech-000810", "code": "MAST 1090", "title": "| MEDICAL ASSISTING SKILLS II", "credits": null, "hours": null, "description": "Furthers student knowledge of the more complex activities in a physician’s office. Topics include: collection/examination of specimens and CLIA regulations/risk management; urinalysis; venipuncture; hematology and chemistry evaluations; advanced reagent testing (Strep Test, HcG etc); administration of medications; medical office emergency procedures and emergency preparedness; rehabilitative therapy procedures; principles of radiology safety and maintenance of medication and immunization records. Prerequisite: MAST 1080 Co-requisite: MAST 1010, MAST 1110, MAST 1120", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1090", "canonical_url": "/centralgatech/courses/mast-1090", "markdown_url": "/centralgatech/courses/mast-1090.md" }, { "id": "centralgatech-000811", "code": "MAST 1100", "title": "| MEDICAL INSURANCE MANAGEMENT", "credits": null, "hours": null, "description": "(15-45-2) Emphasizes essential skills required to file insurance claims within the medical practice. Provides information on types of third-party plans, managed care policies and procedures, and insurance coding conventions. Topics include: managed care, reimbursement, and coding. Prerequisite: MAST 1090 Co-requisite: MAST 1170, MAST 1180", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1100", "canonical_url": "/centralgatech/courses/mast-1100", "markdown_url": "/centralgatech/courses/mast-1100.md" }, { "id": "centralgatech-000812", "code": "MAST 1110", "title": "| ADMINISTRATIVE PRACTICE", "credits": null, "hours": null, "description": "MANAGEMENT (15-75-3) Emphasizes essential skills required for the medical practice in the areas of computers and application of computers skills, electronic health records, accounting procedures, and practice management software. Topics include: accounting procedures and application software. Prerequisite: MAST 1080 Co-requisite: MAST 1090, MAST 1010, MAST 1120", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1110", "canonical_url": "/centralgatech/courses/mast-1110", "markdown_url": "/centralgatech/courses/mast-1110.md" }, { "id": "centralgatech-000813", "code": "MAST 1170", "title": "| MEDICAL ASSISTING EXTERNSHIP", "credits": null, "hours": null, "description": "(0-160-4) This course provides students with an opportunity for in- depth application and reinforcement of principles and techniques in a medical office job setting. This clinical practicum allows the student to become involved in a work setting at a professional level of technical application and requires concentration, practice, and follow-through. Topics include: application of classroom knowledge and skills and functioning in the work environment. Prerequisite: MAST 1090 Co-requisite: MAST 1180, MAST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1170", "canonical_url": "/centralgatech/courses/mast-1170", "markdown_url": "/centralgatech/courses/mast-1170.md" }, { "id": "centralgatech-000814", "code": "MAST 1510", "title": "| MEDICAL BILLING AND CODING I", "credits": null, "hours": null, "description": "(15-30-2) This course provides an introduction to medical billing and coding skills with applications of international coding standards for billing of health care services. Topics include: International Classification of Diseases, code book formats, guidelines and conventions, and coding techniques. Prerequisite: ALHS 1011, ALHS 1090, ENGL 1010 Co-requisite: BUSN 1440 ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1510", "canonical_url": "/centralgatech/courses/mast-1510", "markdown_url": "/centralgatech/courses/mast-1510.md" }, { "id": "centralgatech-000815", "code": "MAST 1520", "title": "| MEDICAL BILLING AND CODING II", "credits": null, "hours": null, "description": "(15-60-3) This course is a continuance of MAST 1510 Medical Billing and Coding I. MAST 1520 topics include: medical records coding techniques; coding linkage and compliance; third- party reimbursement issues; and ethics in coding including fraud and abuse. Prerequisite: MAST 1510 Co-requisite: MAST 1530", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MAST1520", "canonical_url": "/centralgatech/courses/mast-1520", "markdown_url": "/centralgatech/courses/mast-1520.md" }, { "id": "centralgatech-000816", "code": "MATH 1015", "title": "| GEOMETRY AND TRIGONOMETRY", "credits": null, "hours": null, "description": "(45-0-3) Emphasizes basic geometric and trigonometric concepts. Topics include measurement conversion, geometric terminology and measurements, and trigonometric terminology and functions. Prerequisite: MATH 1013 with a grade of C or better", "prerequisites": [ "MATH 1013" ], "program_ids": [ "centralgatech-001076" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MATH1015", "canonical_url": "/centralgatech/courses/math-1015", "markdown_url": "/centralgatech/courses/math-1015.md" }, { "id": "centralgatech-000817", "code": "MCHT 1011", "title": "| INTRODUCTION TO MACHINE TOOL", "credits": null, "hours": null, "description": "(30-60-4) Introduces the fundamental concepts and procedures necessary for the safe and efficient use of basic machine tools. Topics include: machine shop safety, terminology, use of hand and bench tools, analysis of measurements, part layout, horizontal and vertical band saw setup and operation, drill press setup and operation, and quality control.", "prerequisites": [], "program_ids": [ "centralgatech-001016", "centralgatech-001076", "centralgatech-001077", "centralgatech-001078", "centralgatech-001080", "centralgatech-001081" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1011", "canonical_url": "/centralgatech/courses/mcht-1011", "markdown_url": "/centralgatech/courses/mcht-1011.md" }, { "id": "centralgatech-000818", "code": "MCHT 1020", "title": "| HEAT TREATMENT AND SURFACE", "credits": null, "hours": null, "description": "GRINDING (30-60-4) This course provides instruction in the setup, maintenance, and assembly operations of surface grinders. Introduces the properties of various metals, production methods, and identification of ferrous and non-ferrous metals. Topics include heat treatment safety, metallurgy principles, heat treatment of metals, surface grinders, surface grinder maintenance, surface grinder setup, surface grinder operations, and safety.", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001077" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1020", "canonical_url": "/centralgatech/courses/mcht-1020", "markdown_url": "/centralgatech/courses/mcht-1020.md" }, { "id": "centralgatech-000819", "code": "MCHT 1030", "title": "| APPLIED MEASUREMENT", "credits": null, "hours": null, "description": "This course is designed to develop skills necessary for the use and analysis of measurement for machine tool technology and other industrial purposes. Topics include the use of non- precision measuring instruments, use of precision measuring instruments, use of comparison gauges, and analysis of measurements. Co-requisite: MCHT 1011, MCHT 1013", "prerequisites": [], "program_ids": [ "centralgatech-001076" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1030", "canonical_url": "/centralgatech/courses/mcht-1030", "markdown_url": "/centralgatech/courses/mcht-1030.md" }, { "id": "centralgatech-000820", "code": "MCHT 1119", "title": "| LATHE OPERATIONS I", "credits": null, "hours": null, "description": "Provides opportunities for students to develop skill in the setup and operation of metal cutting lathes. Topics include: safety, lathes parts and controls, lathe tooling and tool bit grinding, lathe calculations, lathe setup and operations.", "prerequisites": [], "program_ids": [ "centralgatech-001016", "centralgatech-001076", "centralgatech-001077", "centralgatech-001080" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCHT1119", "canonical_url": "/centralgatech/courses/mcht-1119", "markdown_url": "/centralgatech/courses/mcht-1119.md" }, { "id": "centralgatech-000821", "code": "MCTX 2250", "title": "| MECHATRONICS CAPSTONE", "credits": null, "hours": null, "description": "This capstone course for the mechatronics specialization track will be used as the final project for the mechatronics students. Students will integrate and build upon knowledge and skills gained in previous courses to design, assemble, and analyze mechatronic systems using modern methods and tools. Lectures and laboratory experiences will include control theory, dynamic system behavior, communication protocols, pneumatics, embedded programming, and analysis in time- and-frequency domains. The course concludes with an open- ended team-based multi-week design project. Mechanical Engineering", "prerequisites": [], "program_ids": [ "centralgatech-001071" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MCTX2250", "canonical_url": "/centralgatech/courses/mctx-2250", "markdown_url": "/centralgatech/courses/mctx-2250.md" }, { "id": "centralgatech-000822", "code": "MEGT 1010", "title": "| MANUFACTURING PROCESSES", "credits": null, "hours": null, "description": "This course introduces industrial manufacturing processes that employ processes for material shaping, joining, machining and assembly to the student. Topics include: casting, shaping and molding of metals, ceramics and polymers; particulate processing of metals and ceramics, metal forming, machining, sheet metal working, joining and assembling, surface treatment, and manufacturing design considerations. Emphasis is provided on raw materials, quality, and costs of finished products. The course includes lab exercises that demonstrate the applications of the topics covered in actual manufacturing processes. Prerequisite: Program admission Co-requisite: ENGT 1000", "prerequisites": [], "program_ids": [ "centralgatech-001063", "centralgatech-001069" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MEGT1010", "canonical_url": "/centralgatech/courses/megt-1010", "markdown_url": "/centralgatech/courses/megt-1010.md" }, { "id": "centralgatech-000823", "code": "MEGT 2030", "title": "| STATICS", "credits": null, "hours": null, "description": "This course introduces the student to the study of forces ACADEMIC PROGRAMS acting on objects and their effects on a body at rest or at constant velocity. Static principles are applied in analyzing structural systems. Topics include vectors, resultants, equilibrium of force systems, free body diagrams (FBD), analysis of trusses and frames, distributed loading and geometric properties of areas. Emphasis is placed on bodies at rest in both 2 dimensions and 3 dimensions. Prerequisite: ENGT 1000, MATH 1113", "prerequisites": [ "ENGT 1000", "MATH 1113" ], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MEGT2030", "canonical_url": "/centralgatech/courses/megt-2030", "markdown_url": "/centralgatech/courses/megt-2030.md" }, { "id": "centralgatech-000824", "code": "MLBT 1010", "title": "| INTRODUCTION TO MEDICAL", "credits": null, "hours": null, "description": "LABORATORY TECHNOLOGY (15-45-2) This course introduces students to the terms, concepts, procedures, and equipment used in a professional medical laboratory. Topics include: professional ethics and regulatory agencies; laboratory safety, equipment, and techniques; phlebotomy/specimen processing; related lab math, quality control concepts; process improvement; documentation and computer usage; and point of care testing. Practical experience in phlebotomy will be provided in the institution’s laboratory and/or the clinical setting. Prerequisite: Program admission; MATH 1101 or MATH 1103 or MATH 1111", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1010", "canonical_url": "/centralgatech/courses/mlbt-1010", "markdown_url": "/centralgatech/courses/mlbt-1010.md" }, { "id": "centralgatech-000825", "code": "MLBT 1030", "title": "| URINALYSIS/BODY FLUIDS", "credits": null, "hours": null, "description": "This course provides theory and techniques required to conduct tests on urine and various body fluids. Theory and tests are related to disease states and diagnosis. Topics include: fundamental theory of urinalysis; basic urinalysis tests; correlation of urinalysis to disease states; related lab math; body fluid tests; special urinalysis and related testing; and safety and quality control. Prerequisite: BIOL 2113, BIOL 2113L Co-requisite: MLBT 1010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1030", "canonical_url": "/centralgatech/courses/mlbt-1030", "markdown_url": "/centralgatech/courses/mlbt-1030.md" }, { "id": "centralgatech-000826", "code": "MLBT 1040", "title": "| HEMATOLOGY/COAGULATION", "credits": null, "hours": null, "description": "This course introduces the fundamental formation, function, and degradation of blood cells. Topics include: reticuloendothelial system and blood cell formation, complete blood count and differential, other related blood test, related lab math, correlation of test results to disease states, coagulation and fibrinolysis, instrumentation for hematology and coagulation, critical values and blood cell dycrasias, safety and quality control, and process improvement. Prerequisite: BIOL 2113, BIOL 2113L Co-requisite: MLBT 1010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1040", "canonical_url": "/centralgatech/courses/mlbt-1040", "markdown_url": "/centralgatech/courses/mlbt-1040.md" }, { "id": "centralgatech-000827", "code": "MLBT 1050", "title": "| SEROLOGY/IMMUNOLOGY", "credits": null, "hours": null, "description": "This course introduces the fundamental theory and techniques applicable to serology and immunology practice in the medical laboratory. Topics include: immune system, antigen and antibody reactions, immunological diseases, concept in molecular diagnostics, common serological and molecular techniques, safety and quality control, and quality improvement. Prerequisite: MLBT 1010", "prerequisites": [ "MLBT 1010" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1050", "canonical_url": "/centralgatech/courses/mlbt-1050", "markdown_url": "/centralgatech/courses/mlbt-1050.md" }, { "id": "centralgatech-000828", "code": "MLBT 1060", "title": "| IMMUNOHEMATOLOGY", "credits": null, "hours": null, "description": "This course provides an in-depth study of immunohematology principles and practices as applicable to medical laboratory technology. Topics include: genetic theory and clinical applications, immunology, donor unit collection, related lab math, pre-transfusion testing, management of disease states and transfusion reactions, safety and quality control, and process improvement. Prerequisite: MLBT 1050", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1060", "canonical_url": "/centralgatech/courses/mlbt-1060", "markdown_url": "/centralgatech/courses/mlbt-1060.md" }, { "id": "centralgatech-000829", "code": "MLBT 1070", "title": "| MEDICAL CHEMISTRY", "credits": null, "hours": null, "description": "This course develops concepts and techniques of Medical chemistry applicable to medical laboratory technology. Topics include: carbohydrates, electrolytes and acid-base balance, nitrogenous compounds, related lab math, enzymes and endocrinology, liver functions, lipids, toxicology and therapeutic drug monitoring, safety and quality control, correlation of disease states, process improvement (team approach), and critical thinking skills. Prerequisite: BIOL 2114, BIOL 2114L, MLBT 1010, CHEM 1212, CHEM 1212L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1070", "canonical_url": "/centralgatech/courses/mlbt-1070", "markdown_url": "/centralgatech/courses/mlbt-1070.md" }, { "id": "centralgatech-000830", "code": "MLBT 1080", "title": "| MICROBIOLOGY", "credits": null, "hours": null, "description": "This course introduces fundamental microbiology and parasitology theory and techniques applicable to disease state identification. Topics include: microbiology fundamentals; basic techniques; clinical microbiology; related lab math; anti- microbial sensitivity; safety and quality control; parasitology; mycology, mycobacteriology, and virology; correlation of disease states; and process improvement. Prerequisite: MLBT 1010", "prerequisites": [ "MLBT 1010" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT1080", "canonical_url": "/centralgatech/courses/mlbt-1080", "markdown_url": "/centralgatech/courses/mlbt-1080.md" }, { "id": "centralgatech-000831", "code": "MLBT 2100", "title": "| MEDICAL IMMUNOHEMATOLOGY", "credits": null, "hours": null, "description": "PRACTICUM (0-180-4) This course provides students with an opportunity for in- depth application and reinforcement of immunohematology principles and techniques in a medical laboratory job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follows through. Topics include: specimen processing; slide and tube immunological techniques; criteria for special techniques; component and therapy practices; management of disease states; transfusion complications; safety; documentation/ quality control; and process improvement. The clinical practicum is implemented through the use of written training plans, written performance evaluation, and coordinated ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE supervision. Prerequisite: MLBT 1060", "prerequisites": [ "MLBT 1060" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2100", "canonical_url": "/centralgatech/courses/mlbt-2100", "markdown_url": "/centralgatech/courses/mlbt-2100.md" }, { "id": "centralgatech-000832", "code": "MLBT 2110", "title": "| MEDICAL HEMATOLOGY/COAGULATION", "credits": null, "hours": null, "description": "PRACTICUM (0-180-4) This course provides students with an opportunity for in-depth application and reinforcement of hematology/ coagulation principles and techniques in a medical laboratory job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follows through. Topics include: complete blood count and differentials; other related blood tests; coagulation and fibrinolysis tests; correlation of test results to disease states and critical values; instrumentation; safety; documentation/ quality control; and process improvement. The clinical practicum is implemented through the use of written training plans, written performance evaluation, and coordinated supervision. Prerequisite: MLBT 1040, MLBT 1050", "prerequisites": [ "MLBT 1040", "MLBT 1050" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2110", "canonical_url": "/centralgatech/courses/mlbt-2110", "markdown_url": "/centralgatech/courses/mlbt-2110.md" }, { "id": "centralgatech-000833", "code": "MLBT 2120", "title": "| MEDICAL MICROBIOLOGY PRACTICUM", "credits": null, "hours": null, "description": "(0-180-4) This course provides students with an opportunity for in- depth application and reinforcement of principles and techniques in a medical laboratory job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follows through. Topics include: specimen inoculations; stains; culture work-ups; bacterial identification; anti-microbial sensitivity; media preparation; safety; documentation/quality control; and process improvement. The clinical practicum is implemented through the use of written training plans, written performance evaluation, and coordinated supervision. Prerequisite: MLBT 1050, MLBT 1080", "prerequisites": [ "MLBT 1050", "MLBT 1080" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2120", "canonical_url": "/centralgatech/courses/mlbt-2120", "markdown_url": "/centralgatech/courses/mlbt-2120.md" }, { "id": "centralgatech-000834", "code": "MLBT 2130", "title": "| MEDICAL CHEMISTRY PRACTICUM", "credits": null, "hours": null, "description": "4) This course provides students with an opportunity for in- depth application and reinforcement of chemistry principles and techniques in a medical laboratory job setting. This clinical practicum allows the student to become involved in a work situation at a professional level of technical application and requires concentration, practice, and follows through. Topics include: therapeutic drugs and toxicology; automated and manual chemistry; immune-chemistry; special chemistry; safety; correlation of test results to disease states and critical values; instrumentation; documentation/quality control; and process improvement. The clinical practicum is implemented through the use of written training plans, written performance evaluation, and coordinated supervision. Prerequisite: MLBT 1050, MLBT 1070", "prerequisites": [ "MLBT 1050", "MLBT 1070" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MLBT2130", "canonical_url": "/centralgatech/courses/mlbt-2130", "markdown_url": "/centralgatech/courses/mlbt-2130.md" }, { "id": "centralgatech-000835", "code": "METR 1101", "title": "| INTRODUCTION TO QUALITY", "credits": null, "hours": null, "description": "STANDARDS, AND ISO 9000 (45-0-3) Outlines the history of national and international quality standards. This course emphasizes ISO-9000 and QS-9000 standards; costs and benefits of registration; implementation and upkeep; registrar selection. The registrar accreditation, auditor certification, and company registration will be discussed in detail. also covers the AC and DC standards used in a Standards laboratory. The applications of these standards that pertain to measurements will be emphasized. Multifunction calibrators and digital multimeters will also be covered.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001072", "centralgatech-001073", "centralgatech-001074", "centralgatech-001075" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1101", "canonical_url": "/centralgatech/courses/metr-1101", "markdown_url": "/centralgatech/courses/metr-1101.md" }, { "id": "centralgatech-000836", "code": "METR 1111", "title": "| INTRODUCTION TO MEASURE", "credits": null, "hours": null, "description": "STANDARDS AND MEASURE TECHNOLOGY (15-60-3) This course provides instruction in principles and concepts of measurement technology. Includes various levels of Metrology, terminology, and definitions of common Metrology terms. Also covers units of measurement, metric, linear, motion, force, temperature, fluid, and electronic measurements.", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001072", "centralgatech-001073", "centralgatech-001074", "centralgatech-001075" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1111", "canonical_url": "/centralgatech/courses/metr-1111", "markdown_url": "/centralgatech/courses/metr-1111.md" }, { "id": "centralgatech-000837", "code": "METR 1132", "title": "| MECHANICAL MEASUREMENTS", "credits": null, "hours": null, "description": "Fundamentals of measuring and measurement devices in mechanical measurements. Instrument characteristics, data and error analysis, and calibration will be covered. Experiments with basic instrumentation applied to measurements of force, strain, velocity, acceleration, temperature, pressure, and flow rates will be explored. Prerequisite: METR 1111", "prerequisites": [ "METR 1111" ], "program_ids": [ "centralgatech-001072", "centralgatech-001073", "centralgatech-001075" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1132", "canonical_url": "/centralgatech/courses/metr-1132", "markdown_url": "/centralgatech/courses/metr-1132.md" }, { "id": "centralgatech-000838", "code": "METR 1141", "title": "| QUALITY CONTROL AND STATISTICS", "credits": null, "hours": null, "description": "(45-0-3) This course is an in-depth study of statistical quality control as it pertains to the measurements arena. Statistical analysis is utilized to determine uncertainties, control charts, and dealing with variables. Prerequisite: METR 1132", "prerequisites": [ "METR 1132" ], "program_ids": [ "centralgatech-001072", "centralgatech-001073", "centralgatech-001074" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1141", "canonical_url": "/centralgatech/courses/metr-1141", "markdown_url": "/centralgatech/courses/metr-1141.md" }, { "id": "centralgatech-000839", "code": "METR 1161", "title": "| PHYSICAL METROLOGY", "credits": null, "hours": null, "description": "This course is an in-depth study of temperature, humidity, pressure, vacuum, weight and measures, flow, and related measurements. Various types of measuring instruments and standards will be evaluated for care, use, calibration, and traceability. Prerequisite: Advisor approval", "prerequisites": [], "program_ids": [ "centralgatech-001072", "centralgatech-001073", "centralgatech-001074" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR1161", "canonical_url": "/centralgatech/courses/metr-1161", "markdown_url": "/centralgatech/courses/metr-1161.md" }, { "id": "centralgatech-000840", "code": "METR 2121", "title": "| MODERN COMMUNICATIONS SYSTEMS", "credits": null, "hours": null, "description": "(15-72-3) This course provides instruction in principles and concepts of modern electronics communication. Topics include basic electronic communication technology, transmission and reception, amplitude modulation, frequency modulation, bandwidth, noise suppression, and introduces digital technology with wired and wireless digital communication. Prerequisite: METR 1132", "prerequisites": [ "METR 1132" ], "program_ids": [ "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR2121", "canonical_url": "/centralgatech/courses/metr-2121", "markdown_url": "/centralgatech/courses/metr-2121.md" }, { "id": "centralgatech-000841", "code": "METR 2131", "title": "| RF AND MICROWAVE TECHNOLOGY", "credits": null, "hours": null, "description": "(15-72-3) This course covers electronic communications components at RF and microwave frequencies. Topics include measuring, mathematical calibration, and troubleshooting procedures. Addresses transmitter/reception and modulating devices, antennas, interconnection systems, fiber optics, waveguides, radar, lasers, satellite transceiving devices, and digital/ wireless communications configurations. Prerequisite: METR 1132", "prerequisites": [ "METR 1132" ], "program_ids": [ "centralgatech-001072", "centralgatech-001073" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#METR2131", "canonical_url": "/centralgatech/courses/metr-2131", "markdown_url": "/centralgatech/courses/metr-2131.md" }, { "id": "centralgatech-000842", "code": "MGMT 1105", "title": "| ORGANIZATIONAL BEHAVIOR", "credits": null, "hours": null, "description": "This course provides a general knowledge of the human relations aspects of the senior-subordinate workplace environment. Topics include employee relations principles, problem solving and decision making, leadership techniques to develop employee morale, human values and attitudes, organizational communications, interpersonal communications, and employee conflict.", "prerequisites": [], "program_ids": [ "centralgatech-001090", "centralgatech-001098", "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001112", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1105", "canonical_url": "/centralgatech/courses/mgmt-1105", "markdown_url": "/centralgatech/courses/mgmt-1105.md" }, { "id": "centralgatech-000843", "code": "MGMT 1125", "title": "| BUSINESS ETHICS", "credits": null, "hours": null, "description": "This course provides students with an overview of business ethics and ethical management practices with emphasis on the process of ethical decision-making and working through contemporary ethical dilemmas faced by business organizations, managers and employees. The course is intended to demonstrate to the students how ethics can be integrated into strategic business decisions and can be applied to their own careers. The course uses a case study approach to encourage the student in developing analytical, problem-solving, critical thinking and decision-making skills. Topics include: An overview of business ethics; moral development and moral reasoning; personal values, rights, and responsibilities; frameworks for ethical decision-making in business; justice and economic distribution; corporations and social responsibility; corporate codes of ethics and effective ethics programs; business and society: consumers and the environment; ethical issues in the workplace; business ethics in a global and multicultural environment; business ethics in cyberspace; and business ethics and the rule of law.", "prerequisites": [], "program_ids": [ "centralgatech-001099", "centralgatech-001106", "centralgatech-001107", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT1125", "canonical_url": "/centralgatech/courses/mgmt-1125", "markdown_url": "/centralgatech/courses/mgmt-1125.md" }, { "id": "centralgatech-000844", "code": "MGMT 2120", "title": "| LABOR MANAGEMENT RELATIONS", "credits": null, "hours": null, "description": "(45-0-3) This course provides a student with an overview of the relationship of rank and file employees to management in business organizations. The nature of the workplace, the economic foundations of work organizations, and the history of the relationship between management and labor is examined. The course acquaints the student with the principles of developing positive relationships between management and labor within the context of the legal environment governing labor relations. Topics include: the nature of the American workplace; the economic history of business organizations, the historical roots of labor-management relations; adversarial and cooperative approaches to labor relations; the legal framework of labor relations; employee-employer rights; collective bargaining and union organizing processes; union and nonunion grievance procedures; international labor relations; and the future of labor-management relations in a changing economy. Case studies, readings, and role-plays are used to simulate workplace applications in labor relations.", "prerequisites": [], "program_ids": [ "centralgatech-001107", "centralgatech-001110", "centralgatech-001111" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2120", "canonical_url": "/centralgatech/courses/mgmt-2120", "markdown_url": "/centralgatech/courses/mgmt-2120.md" }, { "id": "centralgatech-000845", "code": "MGMT 2125", "title": "| PERFORMANCE MANAGEMENT", "credits": null, "hours": null, "description": "Develops an understanding of how fostering employer/ employee relationships in the work setting improves work performance. Develops legal counseling and disciplinary techniques to use in various workplace situations. Topics include: the definitions of coaching, counseling, and discipline; importance of the coaching relationship; implementation of an effective counseling strategy; techniques of effective discipline; and performance evaluation techniques.", "prerequisites": [], "program_ids": [ "centralgatech-001090", "centralgatech-001106", "centralgatech-001107", "centralgatech-001108", "centralgatech-001109", "centralgatech-001110" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2125", "canonical_url": "/centralgatech/courses/mgmt-2125", "markdown_url": "/centralgatech/courses/mgmt-2125.md" }, { "id": "centralgatech-000846", "code": "MGMT 2130", "title": "| EMPLOYEE TRAINING AND", "credits": null, "hours": null, "description": "DEVELOPMENT (45-0-3) This course addresses the challenges of improving the performance and career potential of employees, while benefiting the student in their own preparation for success in the workplace. The focus is on both training and career and personal development. Shows the student how to recognize when training and development is needed and how to plan, design, and deliver an effective program of training for employees. Opportunities are provided for the student to develop their own career plans, assess their work-related skills, and practice a variety of skills desired by employers. Topics include: developing a philosophy of training; having systems approach to training and development; the context of training; conducting a needs analysis; critical success factors for employees: learning principles; designing and implementing training plans; conducting and evaluating training; human resource development and careers; personal career development planning; and applications in interpersonal relationships and communication.", "prerequisites": [], "program_ids": [ "centralgatech-001107", "centralgatech-001108", "centralgatech-001109", "centralgatech-001112" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2130", "canonical_url": "/centralgatech/courses/mgmt-2130", "markdown_url": "/centralgatech/courses/mgmt-2130.md" }, { "id": "centralgatech-000847", "code": "MGMT 2135", "title": "| MANAGEMENT COMMUNICATION", "credits": null, "hours": null, "description": "TECHNIQUES (45-0-3) Emphasizes developing the full range of communication strategies required to become a successful manager and prepares managers for the skills required to communicate effectively in business today. Topics include: Organizational/ Strategic Communication, Interpersonal Communication, Presentation Techniques, Presentation Technology & Applications, Team/Group Communication, Intercultural Communication, External Stakeholder Communication and Using Spreadsheet Applications for Business Problem Solving. Co-requisite: COMP 1000", "prerequisites": [], "program_ids": [ "centralgatech-001059", "centralgatech-001107", "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2135", "canonical_url": "/centralgatech/courses/mgmt-2135", "markdown_url": "/centralgatech/courses/mgmt-2135.md" }, { "id": "centralgatech-000848", "code": "MGMT 2145", "title": "| BUSINESS PLAN DEVELOPMENT", "credits": null, "hours": null, "description": "Provides students with knowledge and skills necessary for a manager or entrepreneur to develop and implement a business plan. Topics include: business/community compatibility, introduction to cash flow and break even analysis, development of product/service idea, determination of market feasibility, determination of financial feasibility, development of marketing strategy, development of operations outline, and application of financial concepts.", "prerequisites": [], "program_ids": [ "centralgatech-001107" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2145", "canonical_url": "/centralgatech/courses/mgmt-2145", "markdown_url": "/centralgatech/courses/mgmt-2145.md" }, { "id": "centralgatech-000849", "code": "MGMT 2200", "title": "| PRODUCTION/OPERATION", "credits": null, "hours": null, "description": "MANAGEMENT (45-0-3) This course provides the student with an intensive study of the overall field of production/operations management. Topics include role of production management/production managers, operational design, capacity planning, aggregate planning, inventory management, project management, and quality control/assurance.", "prerequisites": [], "program_ids": [ "centralgatech-001107", "centralgatech-001141" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2200", "canonical_url": "/centralgatech/courses/mgmt-2200", "markdown_url": "/centralgatech/courses/mgmt-2200.md" }, { "id": "centralgatech-000850", "code": "MGMT 2500", "title": "| INTERNATIONAL BUSINESS PRINCIPLES", "credits": null, "hours": null, "description": "(45-0-3) This course provides an opportunity to explore the international business environment and how to make effective business decisions in a global market. Topics include ethics and politics of international business, identification of risks which influence international business decisions, and analyzing the import/export process. Course may be scheduled during summer semester as a study abroad in Scotland. Prerequisite: Program admission Marketing", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MGMT2500", "canonical_url": "/centralgatech/courses/mgmt-2500", "markdown_url": "/centralgatech/courses/mgmt-2500.md" }, { "id": "centralgatech-000851", "code": "MKTG 1100", "title": "| PRINCIPLES OF MARKETING", "credits": null, "hours": null, "description": "This course emphasizes the trends and the dynamic forces that affect the marketing process and the coordination of the marketing functions. Topics include effective communication in a marketing environment; role of marketing; knowledge of marketing principles; marketing strategy; and marketing career paths.", "prerequisites": [], "program_ids": [ "centralgatech-001106", "centralgatech-001111", "centralgatech-001112", "centralgatech-001124", "centralgatech-001137", "centralgatech-001138", "centralgatech-001144", "centralgatech-001146", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1100", "canonical_url": "/centralgatech/courses/mktg-1100", "markdown_url": "/centralgatech/courses/mktg-1100.md" }, { "id": "centralgatech-000852", "code": "MKTG 1162", "title": "CUSTOMER CONTACT SKILLS", "credits": null, "hours": null, "description": "This course provides students with skills necessary to communicate with customers and successfully manage that relationship in both telephone and face-to-face situations. Topics include skills for effective communication with customers, developing rapport with customers, problem- solving in customer service, telephone skills, sales skills in the service environment, managing the difficult customer, and managing the multicultural customer. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001099" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1162", "canonical_url": "/centralgatech/courses/mktg-1162", "markdown_url": "/centralgatech/courses/mktg-1162.md" }, { "id": "centralgatech-000853", "code": "MKTG 1171", "title": "FUNDAMENTALS OF PROPERTY &", "credits": null, "hours": null, "description": "CASUALTY INSURANCE (45-0-3) Summarizes the pervasive nature of pure risk on the individual and on society, and illustrates the way in which insurance can be used to deal with the problems posed by such a risk. The main emphasis is on the insurance product and the use of insurance with the risk management framework. The traditional fields of life insurance, health insurance, and social insurance are treated in terms of their relationship to the wide range of insurable risks to which the individual and the business firm are exposed. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001146" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1171", "canonical_url": "/centralgatech/courses/mktg-1171", "markdown_url": "/centralgatech/courses/mktg-1171.md" }, { "id": "centralgatech-000854", "code": "MKTG 1190", "title": "| INTEGRATED MARKETING", "credits": null, "hours": null, "description": "COMMUNICATIONS (45-0-3) This course introduces the fundamental principles and practices associated with promotion and communication. Topics include: purposes of promotion and IMC, principles of promotion and Integrated Marketing Communication (IMC), budgeting, regulations and controls, media evaluation and target market selection, integrated marketing plans, trends in promotion, and promotion and communication career paths.", "prerequisites": [], "program_ids": [ "centralgatech-001112", "centralgatech-001130", "centralgatech-001131", "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1190", "canonical_url": "/centralgatech/courses/mktg-1190", "markdown_url": "/centralgatech/courses/mktg-1190.md" }, { "id": "centralgatech-000855", "code": "MKTG 1280", "title": "| INTRODUCTION TO SPORTS AND", "credits": null, "hours": null, "description": "RECREATION MANAGEMENT (45-0-3) This course introduces the sociological, philosophical, economic, and historical aspects of the sports and recreation industry. Topics include: nature of sports and recreation management, sports management landscape, research and trends, programming in sports and recreation management, employee training, evaluation and relations, fiscal topics in the business of sports and recreation, and careers in sports and recreation management.", "prerequisites": [], "program_ids": [ "centralgatech-001144", "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG1280", "canonical_url": "/centralgatech/courses/mktg-1280", "markdown_url": "/centralgatech/courses/mktg-1280.md" }, { "id": "centralgatech-000856", "code": "MKTG 2010", "title": "| SMALL BUSINESS MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) This course introduces competencies required in managing a small business. Topics include: nature of small business management, business management and organizational change, marketing strategies, employee relations, financial planning, and business assessment and growth.", "prerequisites": [], "program_ids": [ "centralgatech-001144", "centralgatech-001145" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2010", "canonical_url": "/centralgatech/courses/mktg-2010", "markdown_url": "/centralgatech/courses/mktg-2010.md" }, { "id": "centralgatech-000857", "code": "MKTG 2070", "title": "| BUYING AND MERCHANDISING", "credits": null, "hours": null, "description": "This course develops buying and merchandising skills required in retail or e-business. Topics include: principles of merchandising, inventory control, merchandise plan, assortment planning, buying merchandise, and pricing strategies.", "prerequisites": [], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2070", "canonical_url": "/centralgatech/courses/mktg-2070", "markdown_url": "/centralgatech/courses/mktg-2070.md" }, { "id": "centralgatech-000858", "code": "MKTG 2080", "title": "| REGULATIONS AND COMPLIANCE IN", "credits": null, "hours": null, "description": "SPORTS (45-0-3) This course introduces the legal principles involved in sports. Topics include: nature of sports law, sports law and change, sports law environment, court decision processes, and sports contracts.", "prerequisites": [], "program_ids": [ "centralgatech-001144", "centralgatech-001148" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2080", "canonical_url": "/centralgatech/courses/mktg-2080", "markdown_url": "/centralgatech/courses/mktg-2080.md" }, { "id": "centralgatech-000859", "code": "MKTG 2550", "title": "| ANALYZING SOCIAL MEDIA", "credits": null, "hours": null, "description": "This course analyzes the application of social media to an integrated marketing communication plan. Topics include technical writing for social media, social media auditing, Social Media ROI, trend analysis, social media analytics, and Customer Experience Management (CEM). Prerequisite: MKTG 1100 Magnetic Resonance Imaging", "prerequisites": [], "program_ids": [ "centralgatech-001144" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MKTG2550", "canonical_url": "/centralgatech/courses/mktg-2550", "markdown_url": "/centralgatech/courses/mktg-2550.md" }, { "id": "centralgatech-000860", "code": "MRIM 2300", "title": "| ORIENTATION AND INTRODUCTION TO", "credits": null, "hours": null, "description": "MRI (45-0-3) This course provides knowledge of patient care and assessment, contrast agents, MRI safety, medical ethics and law, cultural diversity, and patient information management. Topics include: MRI history, anatomy, patient care and assessment, MRI safety, instrumentation, MRI fundamentals, and image parameters. Prerequisite: Program admission Co-requisite: MRIM 2320 , MRIM 2350", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2300", "canonical_url": "/centralgatech/courses/mrim-2300", "markdown_url": "/centralgatech/courses/mrim-2300.md" }, { "id": "centralgatech-000861", "code": "MRIM 2320", "title": "| MRI PROCEDURES AND CROSS", "credits": null, "hours": null, "description": "SECTIONAL ANATOMY (30-30-3) Provides knowledge of anatomy, pathology, scanning protocols, contrast administration, and contraindications for magnetic resonance imaging of the head and neck, spine, thorax, abdomen, pelvis, and musculoskeletal system. Topics include: anatomy, scanning protocol, MRI safety, image contrast, and image formation. Prerequisite: Program admission Co-requisite: MRIM 2300 , MRIM 2350", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2320", "canonical_url": "/centralgatech/courses/mrim-2320", "markdown_url": "/centralgatech/courses/mrim-2320.md" }, { "id": "centralgatech-000862", "code": "MRIM 2330", "title": "| MRI PHYSICS AND INSTRUMENTATION", "credits": null, "hours": null, "description": "(30-30-3) This course introduces the concepts of basic physics and instrumentation for magnetic resonance imaging. Topics include imaging parameters, image quality, MRI Fundamentals, image processing and display, and special procedures. Prerequisite: Program admission Co-requisite: MRIM 2360 , MRIM 2370", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2330", "canonical_url": "/centralgatech/courses/mrim-2330", "markdown_url": "/centralgatech/courses/mrim-2330.md" }, { "id": "centralgatech-000863", "code": "MRIM 2350", "title": "| MAGNETIC RESONANCE IMAGING", "credits": null, "hours": null, "description": "CLINICAL EDUCATION (0-270-6) Introduces students to the magnetic resonance imaging department and provides an opportunity for participation in and observation of MRI procedures. Topics include equipment utilization, contrast medias, exam preparation, patient care and assessment, scanning protocol, image quality and progress toward completion of clinical competency evaluations. Prerequisite: Program admission Co-requisite: MRIM 2300 , MRIM 2320", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2350", "canonical_url": "/centralgatech/courses/mrim-2350", "markdown_url": "/centralgatech/courses/mrim-2350.md" }, { "id": "centralgatech-000864", "code": "MRIM 2360", "title": "| MAGNETIC RESONANCE IMAGING", "credits": null, "hours": null, "description": "CLINICAL EDUCATION II (0-270-6) Intermediate course that reinforces learning obtained in", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#MRIM2360", "canonical_url": "/centralgatech/courses/mrim-2360", "markdown_url": "/centralgatech/courses/mrim-2360.md" }, { "id": "centralgatech-000865", "code": "NAST 1500", "title": "| NURSE AIDE ACUTE CARE INTERNSHIP", "credits": null, "hours": null, "description": "(15 - 45 - 2) This course provides students who have completed nurse aide fundamental training with advanced knowledge, skills, and clinical application necessary for carrying out daily ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE patient care activities in the hospital setting. Emphasis is placed on recognizing and reporting changes in the physical and cognitive conditions of hospitalized patients and assisting with specialized care of these patients. Topics include: admissions/discharges/transfers; respiratory changes, airway management and oxygen administration therapy/ safety; neurological changes and seizure precautions; hypo-/ hyperglycemic conditions and testing; IV therapy and central lines; allergic reactions; emergency procedures; pre- and post-operative care. Prerequisite: NAST 1100", "prerequisites": [ "NAST 1100" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#NAST1500", "canonical_url": "/centralgatech/courses/nast-1500", "markdown_url": "/centralgatech/courses/nast-1500.md" }, { "id": "centralgatech-000866", "code": "ORTT 1010", "title": "| ORTHOPEDIC ANATOMY AND", "credits": null, "hours": null, "description": "PHYSIOLOGY (45-30-4) This course offers a detailed study of the skeletal-muscular systems with emphasis on soft tissue injuries, fractures, fracture healing, as well as relevant complications. The study of other body systems as they relate to the treatment of orthopedic injuries is also included. Prerequisite: Program admission Co-requisite: ORTT 1020, ORTT 1030", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT1010", "canonical_url": "/centralgatech/courses/ortt-1010", "markdown_url": "/centralgatech/courses/ortt-1010.md" }, { "id": "centralgatech-000867", "code": "ORTT 1020", "title": "| ORTHOPEDIC TECHNIQUES I", "credits": null, "hours": null, "description": "This course serves as an introduction to the cast room to include different types of supplies, instruments, techniques for the application of basic types of splints and casts. Introduction to traction set-ups. This course will include the application of casts and traction in the laboratory setting. Prerequisite: Program admission Co-requisite: ORTT 1010, ORTT 1030", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT1020", "canonical_url": "/centralgatech/courses/ortt-1020", "markdown_url": "/centralgatech/courses/ortt-1020.md" }, { "id": "centralgatech-000868", "code": "ORTT 1030", "title": "| INTRODUCTION TO ORTHOPEDIC", "credits": null, "hours": null, "description": "SURGICAL TECHNIQUES (45-30-4) This course provides an overview of the surgical techniques utilized by the orthopedic technology profession and develops the fundamental concepts and principles necessary to successfully participate on an orthopedic surgical team. Topics include: orientation to orthopedic surgical techniques, asepsis and the surgical environment, basic orthopedic instrumentation and equipment, principles of sterilization process and application. Prerequisite: Program admission Co-requisite: ORTT 1010, ORTT 1020", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT1030", "canonical_url": "/centralgatech/courses/ortt-1030", "markdown_url": "/centralgatech/courses/ortt-1030.md" }, { "id": "centralgatech-000869", "code": "ORTT 1040", "title": "| ADVANCED ORTHOPEDIC ANATOMY AND", "credits": null, "hours": null, "description": "PHYSIOLOGY (45-30-4) This course provides advanced instruction on orthopedic anatomy, physiology, injuries and diseases. Topics will include the evaluation and treatment of specific orthopedic injuries. Orthopedic diseases will be discussed along with pediatric orthopedics and congenital diseases. Prerequisite: ORTT 1010 Co-requisite: ORTT 1050, ORTT 2010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT1040", "canonical_url": "/centralgatech/courses/ortt-1040", "markdown_url": "/centralgatech/courses/ortt-1040.md" }, { "id": "centralgatech-000870", "code": "ORTT 1050", "title": "| ORTHOPEDIC TECHNIQUES II", "credits": null, "hours": null, "description": "This course will have emphasis on advance casting techniques, assessment and treatment of casting complications, application of specialty casts, advanced traction configurations. The evaluation and treatment of the orthopedic trauma patient will also be covered. Prerequisite: ORTT 1020 Co-requisite: ORTT 1040, ORTT 2010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT1050", "canonical_url": "/centralgatech/courses/ortt-1050", "markdown_url": "/centralgatech/courses/ortt-1050.md" }, { "id": "centralgatech-000871", "code": "ORTT 2020", "title": "| ORTHOPEDIC TECHNOLOGY CLINICAL II", "credits": null, "hours": null, "description": "(0-315-7) This course provides the opportunity for students to complete all required orthopedic technology procedures through participation in and/or observation in a hospital setting or an orthopedic physician’s office. Procedures will include cast cutting, cast applications, splinting, brace applications, setting up traction configurations, surgical procedures. This course will also provide an opportunity for students to participate in the role of the orthopedic technologist in the operating room. Prerequisite: ORTT 1010, ORTT 1020, ORTT 1030, ORTT 1040, ORTT 1050 Co-requisite: ORTT 2010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#ORTT2020", "canonical_url": "/centralgatech/courses/ortt-2020", "markdown_url": "/centralgatech/courses/ortt-2020.md" }, { "id": "centralgatech-000872", "code": "LGST 1100", "title": "| INTRODUCTION TO LAW AND ETHICS", "credits": null, "hours": null, "description": "0-3) This course emphasizes the American legal system, the role of the lawyer and legal assistant within that system, and ACADEMIC PROGRAMS the ethical obligations imposed upon attorneys and legal assistants. Topics include: survey of American jurisprudence, code of professional responsibility and ethics overview, and introduction to areas of law and legal vocabulary.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1100", "canonical_url": "/centralgatech/courses/lgst-1100", "markdown_url": "/centralgatech/courses/lgst-1100.md" }, { "id": "centralgatech-000873", "code": "LGST 1105", "title": "| LEGAL RESEARCH AND LEGAL WRITING I", "credits": null, "hours": null, "description": "(45-0-3) This course introduces the student to the process of locating statutory, judicial, administrative and secondary sources on both a state and federal level. The student will utilize both print and electronic research resources. Focuses on the application and reinforcement of basic writing skills, familiarizes the student with types of writing typically engaged in by lawyers and legal assistants, and prepares the student for legal writing tasks. The student learns to write business letters as well as advisory documents. Topics include: legal analysis and legal correspondence and composition. Prerequisite: ENGL 1101, LGST 1100 Co-requisite: ENGL 1102", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1105", "canonical_url": "/centralgatech/courses/lgst-1105", "markdown_url": "/centralgatech/courses/lgst-1105.md" }, { "id": "centralgatech-000874", "code": "LGST 1110", "title": "| LEGAL RESEARCH AND LEGAL WRITING II", "credits": null, "hours": null, "description": "(45-0-3) Builds on competencies acquired in PARA 1102 and continues the process of locating statutory, judicial, administrative and secondary sources on both a state and federal level. The student will conduct a wider range of research in both print and electronic research resources. Emphasis will be placed on preparation of legal documents. Criminal case documents will be examined, but most of the emphasis will be on civil matters. The student will be presented factual scenarios, and utilizing these facts, research and develop a case from intake to trial. Prerequisite: ENGL 1101, LGST 1100, LGST 1105 Co-requisite: ENGL 1102", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1110", "canonical_url": "/centralgatech/courses/lgst-1110", "markdown_url": "/centralgatech/courses/lgst-1110.md" }, { "id": "centralgatech-000875", "code": "LGST 1115", "title": "| FAMILY LAW", "credits": null, "hours": null, "description": "This course introduces the student to the issues which may arise in family law cases and to the role of the paralegal in assisting the attorney in the development and presentation of such cases. Topics include: issues associated with client and witness interviews, marriage validity and dissolution, litigation support in family law matters, issues concerning children, special matters in family law, and attorney and paralegal ethical obligations. Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1115", "canonical_url": "/centralgatech/courses/lgst-1115", "markdown_url": "/centralgatech/courses/lgst-1115.md" }, { "id": "centralgatech-000876", "code": "LGST 1120", "title": "| REAL ESTATE LAW", "credits": null, "hours": null, "description": "This course introduces the student to the basic concepts of real property law as they pertain to common types of real estate transactions. Additionally, emphasis will be placed on practical skills such as document preparation and title examination. Topics include: real estate contracts, plat reading and legal descriptions, types and purposes of deeds, title searches, common real estate mortgages and documentation, real estate closing and closing statements, recordation statutes and requirements, and elements of the lease. Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1120", "canonical_url": "/centralgatech/courses/lgst-1120", "markdown_url": "/centralgatech/courses/lgst-1120.md" }, { "id": "centralgatech-000877", "code": "LGST 1125", "title": "| CRIMINAL LAW AND CRIMINAL", "credits": null, "hours": null, "description": "PROCEDURE (45-0-3) This course introduces the student to the basic concepts of substantive criminal law and its procedural aspects with an emphasis on the constitutionally protected rights of the accused in the criminal justice system. Topics include: substantive criminal law and procedure and criminal litigation support. Prerequisite: ENGL 1101, LGST 1100, LGST 1105 Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1125", "canonical_url": "/centralgatech/courses/lgst-1125", "markdown_url": "/centralgatech/courses/lgst-1125.md" }, { "id": "centralgatech-000878", "code": "LGST 1130", "title": "| CIVIL LITIGATION", "credits": null, "hours": null, "description": "This course emphasizes competencies and concepts of civil litigation in both federal and state courts. Topics include: federal and state litigation; trial and pretrial proceedings; litigation ethics; and litigation documents, exhibits, investigations, and interviews. Prerequisite: ENGL 1101, LGST 1100, LGST 1105, LGST 1110,", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1130", "canonical_url": "/centralgatech/courses/lgst-1130", "markdown_url": "/centralgatech/courses/lgst-1130.md" }, { "id": "centralgatech-000879", "code": "LGST 1135", "title": "| WILLS, TRUSTS, PROBATE, AND", "credits": null, "hours": null, "description": "ADMINISTRATION (45-0-3) This course provides a general framework of the substantive theory of wills, trusts, and estates. Topics include: wills, trusts, and powers of attorney; probate of wills and administration of estates; document preparation for other probate proceedings; general jurisdiction of the probate court; terminology of wills and estate practice; client interviews; and document preparation. Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1135", "canonical_url": "/centralgatech/courses/lgst-1135", "markdown_url": "/centralgatech/courses/lgst-1135.md" }, { "id": "centralgatech-000880", "code": "LGST 1140", "title": "| TORT LAW", "credits": null, "hours": null, "description": "This course introduces the student to the basic concepts of substantive tort law. Topics include: concepts of intentional torts, negligence and product liability; causation and liability concepts; damages and defenses; and special tort actions and immunities. Prerequisite: ENGL 1101, LGST 1100, LGST 1105 Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1140", "canonical_url": "/centralgatech/courses/lgst-1140", "markdown_url": "/centralgatech/courses/lgst-1140.md" }, { "id": "centralgatech-000881", "code": "LGST 1145", "title": "| LAW OFFICE MANAGEMENT", "credits": null, "hours": null, "description": "This course introduces the student to common forms of law practice. The student will be exposed to methods of billing and time-keeping, automation in the law office, the law office library, the appropriate role of support staff in the law office, and ethical concerns relevant to law office management. Topics include: forms of law practice and insurance needs, support systems, support staff, and ethical responsibilities. Co-requisite: LGST 1100", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1145", "canonical_url": "/centralgatech/courses/lgst-1145", "markdown_url": "/centralgatech/courses/lgst-1145.md" }, { "id": "centralgatech-000882", "code": "LGST 1200", "title": "| BANKRUPTCY/DEBTOR-CREDITOR", "credits": null, "hours": null, "description": "RELATIONS (45-0-3) This course introduces the student to the purpose and application of the Federal Bankruptcy Code and Rules, as well as applicable state law related to bankruptcy and debtor- creditor issues. Topics include: the Bankruptcy Code and Rules, Bankruptcy Court procedures, the preparation of bankruptcy forms and documents, state law workouts and collection, and ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE the role of the paralegal in a bankruptcy practice. Prerequisite: LGST 1100", "prerequisites": [ "LGST 1100" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1200", "canonical_url": "/centralgatech/courses/lgst-1200", "markdown_url": "/centralgatech/courses/lgst-1200.md" }, { "id": "centralgatech-000883", "code": "LGST 1205", "title": "| CONSTITUTIONAL LAW", "credits": null, "hours": null, "description": "This course explains the major legal principles and concepts of the U.S. Constitution including governmental powers and structure, and civil liberties. Additionally, this course includes an exploration of the history of the Constitution and case law interpreting it. Prerequisite: ENGL 1101, LGST 1100, LGST 1105", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1205", "canonical_url": "/centralgatech/courses/lgst-1205", "markdown_url": "/centralgatech/courses/lgst-1205.md" }, { "id": "centralgatech-000884", "code": "LGST 1210", "title": "| LEGAL AND POLICY ISSUES IN", "credits": null, "hours": null, "description": "HEALTHCARE (45-0-3) Provides an overview of the legal issues involved in the delivery of healthcare and the issues relating to Elder Law. Students will recognize the fundamentals of the healthcare treatment relationship, liability issues, patient care decisions and the human condition of sickness. They will explore the complexities of health care financing, health care access, governmental regulations and privacy issues. Topics will also include access to care, informed consent, patient care decisions, the doctor-patient relationship, end-of-life decision making, legal problems of the elderly, law and mental health, AIDS and the law and the privatization of health care facilities. Prerequisite: ENGL 1101, LGST 1100, LGST 1105, LGST 1110", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1210", "canonical_url": "/centralgatech/courses/lgst-1210", "markdown_url": "/centralgatech/courses/lgst-1210.md" }, { "id": "centralgatech-000885", "code": "LGST 1215", "title": "| ADMINISTRATIVE LAW", "credits": null, "hours": null, "description": "This course introduces the student to the basic concepts of administrative law including the legislative process related to enabling the agency. The Administrative Procedure Act (federal and state) is covered. Topics also include agency discretion, due process, delegation, rule- making, investigation, information collection, informal proceeding, hearings, and judicial review. Because paralegals are permitted to represent individuals in some agency proceedings (e.g., social security, unemployment, etc.), the students are introduced to the various aspects of such representation. Prerequisite: LGST 1100, LGST 1105, LGST 1110", "prerequisites": [ "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST1215", "canonical_url": "/centralgatech/courses/lgst-1215", "markdown_url": "/centralgatech/courses/lgst-1215.md" }, { "id": "centralgatech-000886", "code": "LGST 2200", "title": "| PARALEGAL PRACTICUM", "credits": null, "hours": null, "description": "Focuses on the application and reinforcement of paralegal skills and employability principles to further professional development through a practicum with simulated work experiences. Prerequisite: ENGL 1101, LGST 1100, LGST 1105, LGST 1110,", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST2200", "canonical_url": "/centralgatech/courses/lgst-2200", "markdown_url": "/centralgatech/courses/lgst-2200.md" }, { "id": "centralgatech-000887", "code": "LGST 2205", "title": "| ADVANCED LEGAL RESEARCH AND", "credits": null, "hours": null, "description": "WRITING (45-0-3) Continues to develop writing skills developed in LGST 1105 and 1110 focusing on legal memoranda preparation. Additionally, students enhance legal research skills. Course competencies include research methodology, legal memoranda preparation, and substantive law research. Prerequisite: ENGL 1101, LGST 1100, LGST 1105, LGST 1110,", "prerequisites": [ "ENGL 1101", "LGST 1100", "LGST 1105", "LGST 1110" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#LGST2205", "canonical_url": "/centralgatech/courses/lgst-2205", "markdown_url": "/centralgatech/courses/lgst-2205.md" }, { "id": "centralgatech-000888", "code": "PHAR 1000", "title": "| PHARMACEUTICAL CALCULATIONS", "credits": null, "hours": null, "description": "(45-30-4) This course develops knowledge and skills in pharmaceutical calculations procedures. Topics include systems of measurement, medication dispensing calculations, pharmacy mathematical procedures, and calculation tools and techniques. Prerequisite: MATH 1012, MATH 1111", "prerequisites": [ "MATH 1012", "MATH 1111" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1000", "canonical_url": "/centralgatech/courses/phar-1000", "markdown_url": "/centralgatech/courses/phar-1000.md" }, { "id": "centralgatech-000889", "code": "PHAR 1010", "title": "| PHARMACY TECHNOLOGY", "credits": null, "hours": null, "description": "FUNDAMENTALS (60-30-5) Provides an overview of the pharmacy technology field and develops the fundamental concepts and principles necessary for successful participation in the pharmacy field. Topics include safety, orientation to the pharmacy technology field, Fundamental principles of chemistry, basic laws of chemistry, ethics and laws, definitions and terms, and reference sources. PA71 Co-requisite: PHAR 1000 PT22 Co-requisite: PHAR 1000, PHAR 1010, PHAR 1040", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1010", "canonical_url": "/centralgatech/courses/phar-1010", "markdown_url": "/centralgatech/courses/phar-1010.md" }, { "id": "centralgatech-000890", "code": "PHAR 1020", "title": "| PRINCIPLES OF DISPENSING", "credits": null, "hours": null, "description": "MEDICATIONS (45-45-4) This course introduces the student to principles of receiving, storing, and dispensing medications. Topics include purchasing, packaging, and labeling drugs; pharmacy policies and procedures; documentation; inventory and filing systems; compounding; storage and control; pharmacy equipment; and health care organizational structure. This course provides laboratory and clinical practice. PA71 Co-requisite: PHAR 1000 PT22 Co-requisite: PHAR 1000, PHAR 1020, PHAR 1040", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1020", "canonical_url": "/centralgatech/courses/phar-1020", "markdown_url": "/centralgatech/courses/phar-1020.md" }, { "id": "centralgatech-000891", "code": "PHAR 1030", "title": "| PRINCIPLES OF STERILE MEDICATION", "credits": null, "hours": null, "description": "PREPARATION (45-45-4) Continues the development of student knowledge and skills in preparing medication, processing glassware, ACADEMIC PROGRAMS and maintaining an aseptic environment. Topics include aseptic and sterile techniques, parenteral admixtures, hyperalimentation, chemotherapy, filtering, disinfecting, contamination, ophthalmic preparations, infection control, and quality control. PT22 Prerequisite: PHAR 1000, PHAR 1010, HAR 1020, PHAR", "prerequisites": [ "PHAR 1000", "PHAR 1010", "HAR 1020" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1030", "canonical_url": "/centralgatech/courses/phar-1030", "markdown_url": "/centralgatech/courses/phar-1030.md" }, { "id": "centralgatech-000892", "code": "PHAR 1040", "title": "| PHARMACOLOGY", "credits": null, "hours": null, "description": "Prerequisite: Program admission The course introduces the students to principles and knowledge about all classifications of medication. Topics include disease states and treatment modalities, pharmaceutical side effects and drug interactions, control substances, specific drugs, and drug addiction and abuse. PT22 Co-requisite: PHAR 1000, PHAR 1010, PHAR 1020", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR1040", "canonical_url": "/centralgatech/courses/phar-1040", "markdown_url": "/centralgatech/courses/phar-1040.md" }, { "id": "centralgatech-000893", "code": "PHAR 2060", "title": "| ADVANCED PHARMACY TECHNOLOGY", "credits": null, "hours": null, "description": "PRINCIPLES (30-30-3) This course presents the advanced concepts and principles needed in the pharmacy technology field. Topics include physician orders, patient profiles, pharmacy data systems, job readiness, legal requirements, inventory and billing, pharmaceutical calculations review and pharmacology review. PT22 Prerequisite: COMP 1000, PHAR 1030, PHAR 1050", "prerequisites": [ "COMP 1000", "PHAR 1030", "PHAR 1050" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHAR2060", "canonical_url": "/centralgatech/courses/phar-2060", "markdown_url": "/centralgatech/courses/phar-2060.md" }, { "id": "centralgatech-000894", "code": "PHTA 1110", "title": "| INTRODUCTION TO PHYSICAL THERAPY", "credits": null, "hours": null, "description": "(15-30-2) This course introduces students to the profession of physical therapy. Topics include professional responsibilities and core values; legal and ethical responsibilities in physical therapy practice; current trends in physical therapy; communication skills; cultural competency and health disparities and research and evidence-based practice. Prerequisite: Program Admission, BIOL 2114, BIOL 2114L,", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA1110", "canonical_url": "/centralgatech/courses/phta-1110", "markdown_url": "/centralgatech/courses/phta-1110.md" }, { "id": "centralgatech-000895", "code": "PHTA 1120", "title": "| PATIENT CARE SKILLS", "credits": null, "hours": null, "description": "This course introduces students to basic patient care skills and administrative tasks in physical therapy. Topics include patient care skills; principles of teaching and learning; documentations skills; and administrative and management tasks. Prerequisite: Program Admission, BIOL 2114, BIOL 2114L,", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA1120", "canonical_url": "/centralgatech/courses/phta-1120", "markdown_url": "/centralgatech/courses/phta-1120.md" }, { "id": "centralgatech-000896", "code": "PHTA 1130", "title": "| FUNCTIONAL ANATOMY AND", "credits": null, "hours": null, "description": "KINESIOLOGY I (15-75-3) This course introduces the basic concepts of functional anatomy and the study of human movement. Topics include an overview of kinesiology and the principles of biomechanics; examination of the neuromusculoskeletal system; a review of muscle attachments, actions, and innervations; and instruction in assessment techniques for measuring joint range of motion. Prerequisite: Program Admission, BIOL 2114, BIOL 2114L,", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA1130", "canonical_url": "/centralgatech/courses/phta-1130", "markdown_url": "/centralgatech/courses/phta-1130.md" }, { "id": "centralgatech-000897", "code": "PHTA 1140", "title": "| PHYSICAL THERAPY PROCEDURES I", "credits": null, "hours": null, "description": "90-3) This course introduces the principles and application techniques for various physical therapy interventions. Topics include superficial and deep thermal physical agents; athermal agents and electromagnetic radiation; therapeutic massage techniques; wound care and personal protection; and instruction in assessment techniques for sensory response. Prerequisite: Program Admission, BIOL 2114, BIOL 2114L,", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA1140", "canonical_url": "/centralgatech/courses/phta-1140", "markdown_url": "/centralgatech/courses/phta-1140.md" }, { "id": "centralgatech-000898", "code": "PHTA 2110", "title": "| PATHOLOGY I", "credits": null, "hours": null, "description": "This course provides a survey of injuries and diseases commonly treated by physical therapist assistants. Topics include review of systems; an examination of musculoskeletal system disorders and diseases; examination of general medical disorders and diseases; examination of circulation, respiration, and ventilation; recognition and response procedures for changes in physiologic status; and an overview of pharmacology for pain, musculoskeletal, endocrine, and GI system management. Prerequisite: PHTA 1110, PHTA 1120, PHTA 1130, PHTA 1140", "prerequisites": [ "PHTA 1110", "PHTA 1120", "PHTA 1130", "PHTA 1140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2110", "canonical_url": "/centralgatech/courses/phta-2110", "markdown_url": "/centralgatech/courses/phta-2110.md" }, { "id": "centralgatech-000899", "code": "PHTA 2120", "title": "| REHABILITATION I", "credits": null, "hours": null, "description": "This course provides instruction in exercises and rehabilitation techniques commonly utilized by physical therapist assistants. Topics include functional mobility and training; rehabilitation techniques for musculoskeletal disorders; gait training and assistive devices; home management, community, and work reintegration; and health promotion, wellness and prevention. Prerequisite: PHTA 1110, PHTA 1120, PHTA 1130, PHTA 1140", "prerequisites": [ "PHTA 1110", "PHTA 1120", "PHTA 1130", "PHTA 1140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2120", "canonical_url": "/centralgatech/courses/phta-2120", "markdown_url": "/centralgatech/courses/phta-2120.md" }, { "id": "centralgatech-000900", "code": "PHTA 2130", "title": "| PHYSICAL THERAPY PROCEDURES II", "credits": null, "hours": null, "description": "90-3) This course provides continued instruction in the principles and application techniques for various physical therapy interventions. Topics include pain theories and assessment techniques; mechanical physical agents; electrotherapeutic physical agents; and adaptive, protective, and supportive devices. Prerequisite: PHTA 1110, PHTA 1120, PHTA 1130, PHTA 1140", "prerequisites": [ "PHTA 1110", "PHTA 1120", "PHTA 1130", "PHTA 1140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2130", "canonical_url": "/centralgatech/courses/phta-2130", "markdown_url": "/centralgatech/courses/phta-2130.md" }, { "id": "centralgatech-000901", "code": "PHTA 2140", "title": "| CLINICAL EDUCATION I", "credits": null, "hours": null, "description": "This course provides students with the opportunity to observe and practice skills learned in the classroom and laboratory at various clinical settings for physical therapy practice. Students will be supervised by a clinical instructor who is either a licensed physical therapist or licensed physical therapist assistant. Topics include preparation of patients, treatment areas, and equipment; vital signs and sensory assessment; wound care and personal protection; transfers, body mechanics, and assistive devices; application of physical agents; goniometric measurements; therapeutic massage; interpersonal and communication skills; principles of teaching and learning; documentation; and modification of interventions within the plan of care. Prerequisite: PHTA 2110, PHTA 2120, PHTA 2130", "prerequisites": [ "PHTA 2110", "PHTA 2120", "PHTA 2130" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2140", "canonical_url": "/centralgatech/courses/phta-2140", "markdown_url": "/centralgatech/courses/phta-2140.md" }, { "id": "centralgatech-000902", "code": "PHTA 2150", "title": "| PATHOLOGY II", "credits": null, "hours": null, "description": "This course provides continued instruction on diseases and conditions commonly treated by physical therapist assistants with an emphasis on neurological conditions. Topics include a review of neuroanatomy and physiology; examination of neurological disorders and diseases; examination of pediatric disorders and diseases; limb deficiency disorders; and pharmacology for spinal cord injuries, traumatic brain injuries, and cardiac and pulmonary system management. Prerequisite: PHTA 2140", "prerequisites": [ "PHTA 2140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2150", "canonical_url": "/centralgatech/courses/phta-2150", "markdown_url": "/centralgatech/courses/phta-2150.md" }, { "id": "centralgatech-000903", "code": "PHTA 2160", "title": "| REHABILITATION II", "credits": null, "hours": null, "description": "This course provides continued instruction in exercises and rehabilitation techniques commonly utilized by physical therapist assistants. Topics includes rehabilitation of the neurological patient; rehabilitation of the pediatric patient; cardiac rehabilitation and chest physical therapy techniques; prosthetic and orthotic training; and the assessment of arousal, attention, and cognition. Prerequisite: PHTA 2140", "prerequisites": [ "PHTA 2140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2160", "canonical_url": "/centralgatech/courses/phta-2160", "markdown_url": "/centralgatech/courses/phta-2160.md" }, { "id": "centralgatech-000904", "code": "PHTA 2170", "title": "| KINESIOLOGY II", "credits": null, "hours": null, "description": "This course provides continued instruction in the study of human movement. Topics include posture and equilibrium; gait, locomotion, and balance; advanced gait training techniques; and the assessment of muscle performance. Prerequisite: PHTA 2140", "prerequisites": [ "PHTA 2140" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2170", "canonical_url": "/centralgatech/courses/phta-2170", "markdown_url": "/centralgatech/courses/phta-2170.md" }, { "id": "centralgatech-000905", "code": "PHTA 2180", "title": "| CLINICAL EDUCATION II", "credits": null, "hours": null, "description": "This course provides continued opportunity for clinical education under the supervision of a licensed physical therapist or licensed physical therapist assistant in various health care facilities. Topics include therapeutic exercise; interventions for neurological conditions; mechanical and electrotherapeutic physical agents; gait and posture analysis; advanced gait training techniques; manual muscle testing; interventions for limb deficiency disorders; identification of architectural barriers; interpersonal and communication skills; principles of teaching and learning; documentation; and modification of interventions within the plan of care. Prerequisite: PHTA 2150, PHTA 2160, PHTA 2170", "prerequisites": [ "PHTA 2150", "PHTA 2160", "PHTA 2170" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2180", "canonical_url": "/centralgatech/courses/phta-2180", "markdown_url": "/centralgatech/courses/phta-2180.md" }, { "id": "centralgatech-000906", "code": "PHTA 2190", "title": "| CLINICAL EDUCATION III", "credits": null, "hours": null, "description": "This course provides continued opportunity for clinical education under the supervision of a licensed physical therapist or licensed physical therapist assistant in various health care facilities. Topics include therapeutic exercise; interventions for neurological conditions; mechanical and electrotherapeutic physical agents; gait and posture analysis; advanced gait training techniques; manual muscle testing; interventions for limb deficiency disorders; identification of architectural barriers; interpersonal and communication skills; principles of teaching and learning; documentation; and modification of interventions within the plan of care. Prerequisite: PHTA 2150, PHTA 2160, PHTA 2170", "prerequisites": [ "PHTA 2150", "PHTA 2160", "PHTA 2170" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHTA2190", "canonical_url": "/centralgatech/courses/phta-2190", "markdown_url": "/centralgatech/courses/phta-2190.md" }, { "id": "centralgatech-000907", "code": "PHYS 1112L", "title": "| INTRODUCTORY PHYSICS LAB II", "credits": null, "hours": null, "description": "Selected laboratory exercises paralleling the topics in PHYS 1112. The laboratory exercises for this course include material from electricity and magnetism, geometric optics, and physical optics. Prerequisite: PHYS 1111, PHYS 1111L Co-requisite: PHYS 1112 Plumbing", "prerequisites": [], "program_ids": [ "centralgatech-001063" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PHYS1112L", "canonical_url": "/centralgatech/courses/phys-1112l", "markdown_url": "/centralgatech/courses/phys-1112l.md" }, { "id": "centralgatech-000908", "code": "PLBG 1000", "title": "| INTRODUCTION TO PLUMBING", "credits": null, "hours": null, "description": "This course provides an introduction to the Plumbing construction trade. The knowledge and skills required to succeed in the Plumbing industry are emphasized. Topics include general safety rules and practices, introduction to construction and the pipe trades, and work ethics, communication, and affective skills and practices.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1000", "canonical_url": "/centralgatech/courses/plbg-1000", "markdown_url": "/centralgatech/courses/plbg-1000.md" }, { "id": "centralgatech-000909", "code": "PLBG 1160", "title": "| PLUMBING DRAWINGS", "credits": null, "hours": null, "description": "This course introduces the reading and interpretation of sets of building drawings. Topics include types of plans, scales, specifications, conventions, and schedules. Co-requisite: PLBG 1000", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1160", "canonical_url": "/centralgatech/courses/plbg-1160", "markdown_url": "/centralgatech/courses/plbg-1160.md" }, { "id": "centralgatech-000910", "code": "PLBG 1210", "title": "| PIPES, VALVES, AND FITTINGS", "credits": null, "hours": null, "description": "This course introduces the student to the materials, pipes, valves, fittings, and joining methods used in the plumbing trade. Topics include pipes, fittings, and valves, hangers and supports, and joining techniques.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1210", "canonical_url": "/centralgatech/courses/plbg-1210", "markdown_url": "/centralgatech/courses/plbg-1210.md" }, { "id": "centralgatech-000911", "code": "PLBG 1220", "title": "| DRAINAGE SYSTEMS", "credits": null, "hours": null, "description": "Provides an introduction to the treatment, design and materials used in plumbing, drainage systems. Applicable plumbing codes are also discussed. Topics include public and private sewage systems and treatment; materials, fittings, and valves; traps, venting, and grade; ejector and sump pumps; design, sizing, and installation of drainage systems.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1220", "canonical_url": "/centralgatech/courses/plbg-1220", "markdown_url": "/centralgatech/courses/plbg-1220.md" }, { "id": "centralgatech-000912", "code": "PLBG 1240", "title": "| WATER SUPPLY SYSTEMS", "credits": null, "hours": null, "description": "Provides an introduction to the sources, treatment, design, and materials used in residential cold and hot water distribution systems. Applicable plumbing codes are also discussed. Topics include public and private water systems; materials and fittings; valves; water treatment; water mains and services; hot water supply; design and installation of water supply systems.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1240", "canonical_url": "/centralgatech/courses/plbg-1240", "markdown_url": "/centralgatech/courses/plbg-1240.md" }, { "id": "centralgatech-000913", "code": "PLBG 1260", "title": "| PLUMBING FIXTURES AND APPLIANCES", "credits": null, "hours": null, "description": "(15-60-3) This course introduces the identification, theory, application and installation of residential plumbing fixtures, trim and appliances.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PLBG1260", "canonical_url": "/centralgatech/courses/plbg-1260", "markdown_url": "/centralgatech/courses/plbg-1260.md" }, { "id": "centralgatech-000914", "code": "PNSG 1600", "title": "| INTRODUCTION TO PHARMACOLOGY", "credits": null, "hours": null, "description": "AND CLINICAL CALCULATIONS (10-75-3) Applies fundamental mathematical concepts and includes basic drug administration. Emphasizes critical thinking skills and introduces pharmacological classes. Topics include systems of measurement, calculating drug problems, resource materials usage, fundamental pharmacology, administering medications in a simulated clinical environment, principles of IV therapy techniques, and client education. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1600", "canonical_url": "/centralgatech/courses/pnsg-1600", "markdown_url": "/centralgatech/courses/pnsg-1600.md" }, { "id": "centralgatech-000915", "code": "PNSG 1601M", "title": "| PN/MILITARY TRANSITION", "credits": null, "hours": null, "description": "This didactic course is designed to transition military medical personnel to the role of Licensed Practical Nurse (LPN). This course will cover the differences between military healthcare ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE roles and the LPN role as defined by the Georgia Nurse Practice Act and the GBON Rules and Regulations. It will meet the Georgia Board of Nursing (GBON) requirements for an approved Military Medical Personnel to Licensed Practical Nursing Transition Program.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1601M", "canonical_url": "/centralgatech/courses/pnsg-1601m", "markdown_url": "/centralgatech/courses/pnsg-1601m.md" }, { "id": "centralgatech-000916", "code": "PNSG 1605", "title": "| FUNDAMENTALS", "credits": null, "hours": null, "description": "An introduction to the nursing process and clinical practice, normal body system function, and terminology related to healthcare. Topics include: nursing as a profession; scope of practice; ethics and law; client care which is defined as using the nursing process, using critical thinking, and providing client education and includes principles and skills of nursing practice, documentation, history taking, and an introduction to structure, function, terminology associated with healthcare, and physical assessment of body systems; customer/client relationships; standard precautions; activities of daily living; infection control/ blood-borne/ airborne pathogens; hygiene and personal care; mobility and biomechanics; fluid and electrolytes; oxygen care; and perioperative care. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1605", "canonical_url": "/centralgatech/courses/pnsg-1605", "markdown_url": "/centralgatech/courses/pnsg-1605.md" }, { "id": "centralgatech-000917", "code": "PNSG 1610", "title": "| ADULT HEALTH NURSING I", "credits": null, "hours": null, "description": "Focuses on client care and clinical client care including using the nursing process, performing assessments, developing critical thinking, engaging in client education, and displaying cultural competence in the adult population and with attention to special populations. Lecture/lab topics include terminology associated with healthcare, structure and function of body systems, health management and maintenance; prevention of illness; care of the individual as a whole; immunology; as well as pathological diseases, disorders, and deviations from the normal state of health, client care, treatment, pharmacology, nutrition and standard precautions concerning the cardiovascular, respiratory, and hematological and immunological systems. Clinical topics include but are not limited to hygiene and personal care; mobility and biomechanics; fluid and electrolytes; oxygen care; perioperative care; immunology; mental health; and oncology, and standard precautions about cardiovascular, hematological, immunological, respiratory, neurological, sensory, musculoskeletal, endocrine, gastrointestinal, urinary, integumentary and reproductive systems. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1610", "canonical_url": "/centralgatech/courses/pnsg-1610", "markdown_url": "/centralgatech/courses/pnsg-1610.md" }, { "id": "centralgatech-000918", "code": "PNSG 1615", "title": "| ADULT HEALTH NURSING II", "credits": null, "hours": null, "description": "Focuses on client care and clinical client care including using the nursing process, performing assessments, developing critical thinking, engaging in client education and displaying cultural competence in the adult population and with attention to special populations. Lecture/lab topics include functions of the human body, terminology associated with healthcare, health management and maintenance; prevention of illness; care of the individual as a whole; immunology; as well as pathological diseases, disorders and deviations from the normal state of health, client care, treatment, pharmacology, nutrition and standard precautions with regard to the endocrine, gastrointestinal, and urinary systems. Clinical topics include, but are not limited to: hygiene and personal care; mobility and biomechanics; fluid and electrolytes; oxygen care; perioperative care; immunology; mental health; and oncology, and standard precautions concerning cardiovascular, hematological, immunological, respiratory, neurological, sensory, musculoskeletal, endocrine, gastrointestinal, urinary, integumentary and reproductive systems. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1615", "canonical_url": "/centralgatech/courses/pnsg-1615", "markdown_url": "/centralgatech/courses/pnsg-1615.md" }, { "id": "centralgatech-000919", "code": "PNSG 1620", "title": "| ADULT HEALTH NURSING III", "credits": null, "hours": null, "description": "Focuses on client care and clinical client care including using the nursing process, performing assessments, developing critical thinking, engaging in client education, and displaying cultural competence in the adult population and with attention to special populations. Lecture/lab topics include functions of the human body, terminology associated with healthcare, health management and maintenance; prevention of illness; care of the individual as a whole; immunology; as well as pathological diseases, disorders and deviations from the normal state of health, client care, treatment, pharmacology, nutrition and standard precautions with regard to the neurological and sensory systems, disaster preparedness, emergency response, triage, and bioterrorism. Clinical topics include, but are not limited to: hygiene and personal care; mobility and biomechanics; fluid and electrolytes; oxygen care; perioperative care; immunology; mental health; and oncology, and standard precautions concerning cardiovascular, hematological, immunological, respiratory, neurological, sensory, musculoskeletal, endocrine, gastrointestinal, urinary, integumentary and reproductive systems. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1620", "canonical_url": "/centralgatech/courses/pnsg-1620", "markdown_url": "/centralgatech/courses/pnsg-1620.md" }, { "id": "centralgatech-000920", "code": "PNSG 1625", "title": "| ADULT HEALTH NURSING IV", "credits": null, "hours": null, "description": "Focuses on client care and clinical client care including using the nursing process, performing assessments, developing critical thinking, engaging in client education, and displaying cultural competence in the adult population and with attention to special populations. Lecture/lab topics include functions of the human body, terminology associated with healthcare, health management and maintenance; prevention of illness; care of the individual as a whole; immunology; as well as pathological diseases, disorders and deviations from the normal state of health, client care, treatment, pharmacology, nutrition and standard precautions with regard to the integumentary and musculoskeletal systems and oncology. Clinical topics include, but are not limited to: hygiene and personal care; mobility and biomechanics; fluid and electrolytes; oxygen care; perioperative care; immunology; mental health; and oncology, and standard precautions with regard to cardiovascular, hematological, immunological, respiratory, neurological, sensory, musculoskeletal, endocrine, gastrointestinal, urinary, integumentary and reproductive systems. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1625", "canonical_url": "/centralgatech/courses/pnsg-1625", "markdown_url": "/centralgatech/courses/pnsg-1625.md" }, { "id": "centralgatech-000921", "code": "PNSG 1630", "title": "| MENTAL HEALTH NURSING", "credits": null, "hours": null, "description": "Presents concepts within the field of mental health nursing and their application to everyday human behavior, thinking, emotion, and communication. Focuses on health management and maintenance and the prevention of illness, care of the mental health patient as a whole, and deviations from the normal state of health. Emphasis is placed on students understanding mental health principles and their application within the context of family, work and social interactions. Topics include an overview of psychological disorders and their treatments; terminology associated with health care, stress and health; health management ACADEMIC PROGRAMS and maintenance and prevention of illness; care of the mental health patient as a whole, and deviations from the normal state of health in the mental health client; client care, Pharmacology, and diet therapy of the mental health client; and standard precautions. The definition of client care includes using the nursing process, performing assessments, using critical thinking, and providing client education, displaying cultural competence across the life span and with attention to special populations. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1630", "canonical_url": "/centralgatech/courses/pnsg-1630", "markdown_url": "/centralgatech/courses/pnsg-1630.md" }, { "id": "centralgatech-000922", "code": "PNSG 1635", "title": "| MATERNAL NURSING", "credits": null, "hours": null, "description": "Focuses on maternal and newborn patient care aspects of health management and maintenance and prevention of illness, care of the individual as a whole, and deviations from the normal state of health. The definition of client care includes using the nursing process, performing assessments, using critical thinking, providing client education, displaying cultural competence across the life span, and with attention to special populations. Topics include the function of the human body systems, terminology associated with healthcare, health management and maintenance and prevention of illness; care of the individual as a whole; and deviations from the normal state of health in the reproductive system, pathological and nonpathological concerns in obstetric clients, and the newborn; client care, treatment, pharmacology, medication administration, and diet therapy related to the reproductive system, obstetric clients, and the newborn, and standard precautions. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1635", "canonical_url": "/centralgatech/courses/pnsg-1635", "markdown_url": "/centralgatech/courses/pnsg-1635.md" }, { "id": "centralgatech-000923", "code": "PNSG 1640", "title": "| PEDIATRIC NURSING", "credits": null, "hours": null, "description": "Focuses on health management and maintenance and the prevention of illness, care of the child as a whole, and deviations from the normal state of health. The definition of client care includes using the nursing process, performing assessments, using critical thinking, and providing client education. Topics include health management and maintenance and prevention of illness, care of the child as a whole, and deviations from the normal state of health in the pediatric client; client, care, treatments, pharmacology, and diet therapy of the pediatric client; growth and development; functions of the human body, terminology associated with healthcare, and standard precautions. Prerequisite: PNSG 1600, PNSG 1605", "prerequisites": [ "PNSG 1600", "PNSG 1605" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PNSG1640", "canonical_url": "/centralgatech/courses/pnsg-1640", "markdown_url": "/centralgatech/courses/pnsg-1640.md" }, { "id": "centralgatech-000924", "code": "POLS 2401", "title": "| Global Issues", "credits": null, "hours": null, "description": "This course introduces students to contemporary issues in global affairs. It assumes no prior knowledge of international relations. The course examines problems facing the global community, as well as the prospects for governments, individuals, and international groups to address those problems. The course has three broad areas: the global political economy; human development, inequality, and rights; and global institutions and security. Key to all these areas is the role of the United States and other regional powers in world affairs. Prerequisite: Appropriate Degree Level Writing and Reading Placement Test Scores Polysomnographic", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#POLS2401", "canonical_url": "/centralgatech/courses/pols-2401", "markdown_url": "/centralgatech/courses/pols-2401.md" }, { "id": "centralgatech-000925", "code": "PSGT 1101", "title": "| INTRODUCTION TO SLEEP TECHNOLOGY", "credits": null, "hours": null, "description": "(60-120-7) This course provides an overview of the sleep technology field and develops the fundamental knowledge, skills, attitudes, and techniques necessary to successfully participate as an entry- level polysomnographic technician. Emphasis will be placed on the profession of sleep technology the history and scope of practice; ethics, roles and professional behaviors; normal sleep-wake physiology and pathophysiology; basic sciences of sleep-wake related neuroanatomy including associated upper and lower airway anatomy and physiology; circadian rhythm biology , respiratory and cardiac systems; fundamentals of sleep-wake EEG waveform recognition; EEG microstructure; sleep architecture and all sleep-wake stage recognition. Prerequisite: ALHS 1011, ALHS 1090, ENGL 1010, MATH 1012, PSYC 1010, ALHS 1040 Co-requisite: PSGT 1102", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSGT1101", "canonical_url": "/centralgatech/courses/psgt-1101", "markdown_url": "/centralgatech/courses/psgt-1101.md" }, { "id": "centralgatech-000926", "code": "PSGT 1102", "title": "| ESSENTIALS OF SLEEP TECHNOLOGY", "credits": null, "hours": null, "description": "(60-120-7) This course provides an overview of the sleep technology field and develops the fundamental knowledge, skills, attitudes, and techniques necessary to successfully participate as an entry-level polysomnographic technician. Emphasis will be placed on Sleep-Disordered breathing; Sleep-Disordered breathing treatment modalities including CPAP , BiLevel PAP and oxygen, EMG Dyssomnia events; specialized testing including MSLT, MWT and Seizure protocols; specialized sleep disorders including narcolepsy, parasomnias, and insomnias; sleep center safety and the process flow of patients. Prerequisite: ALHS 1011, ALHS 1090, ENGL 1010, MATH 1012, PSYC 1010, ALHS 1040 Co-requisite: PSGT 1101", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSGT1102", "canonical_url": "/centralgatech/courses/psgt-1102", "markdown_url": "/centralgatech/courses/psgt-1102.md" }, { "id": "centralgatech-000927", "code": "PSGT 1111", "title": "| POLYSOMNOGRAPHIC APPLICATIONS", "credits": null, "hours": null, "description": "(60-195-9) An introduction to the polysomnographic skills and principles necessary for procedures to be performed in the clinical ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE setting. Emphasis will be placed on the practical application of sleep technology. Students will be required to master the skills of patient and equipment preparation; appropriate choice of leads; electrodes and sensors; proper patient preparation techniques and 10-20 EEG measurement. Instrumentation will be stressed including digital systems, oximeters, various PAP units and PAP patient interfaces, PTAF, RIP , end-tidal TCO2 and oximetry. An understanding of electrical currents will be covered including AC/DC amplifiers, EEG filters, and Common Mode Rejection Ratio. Data acquisition techniques will be incorporated including polysomnographic artifact resolution, physician order clarification, patient assessment and orientation techniques, monitoring and documentation. Students will practice polysomnographic laboratory skills including: multiple appropriate polysomnographic subject hook-ups for various types of polysomnographic testing acquiring competent skills in: charting; record documentation; application of PAP and oxygen devices and protocols; titration protocols; proper care of equipment including cleaning; sterilization; storage and archiving of data. Prerequisite: PSGT 1101, PSGT 1102", "prerequisites": [ "PSGT 1101", "PSGT 1102" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSGT1111", "canonical_url": "/centralgatech/courses/psgt-1111", "markdown_url": "/centralgatech/courses/psgt-1111.md" }, { "id": "centralgatech-000928", "code": "PSGT 2100", "title": "| POLYSOMNOGRAPHIC PRACTICUM", "credits": null, "hours": null, "description": "(0-270-6) A supervised clinical course, provides the student the continued development of skills and concepts in sleep disorder centers. Students will apply the skills and concepts learned in PSGT 1111 Polysomnographic Applications and other courses as they interview patients; explain procedures; demonstrate professional ethics and behavior; prepare equipment; perform patient assessment and orientation techniques and review patient charts. Students will appropriately adjust instrumentation and perform 10-20 EEG measurement; attach the necessary polysomnographic equipment to patients; perform polysomnographic studies, therapeutic interventions including PAP , BiLevel and oxygen interventions as well as monitor and document all interactions and procedures. Students will be required to complete a minimum of 210 hours of clinical rotation in order to successfully complete the Polysomnographic diploma program. For Board of Registered Polysomnographic Technologists (BRPT) certification eligibility upon completion of this course, please see the Program Chair. Prerequisite: PSGT 1101, PSGT 1102 ,PSGT 1111 Co-requisite: PSGT 2101", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSGT2100", "canonical_url": "/centralgatech/courses/psgt-2100", "markdown_url": "/centralgatech/courses/psgt-2100.md" }, { "id": "centralgatech-000929", "code": "PSYC 1100", "title": "| PERSPECTIVES OF THE HUMAN MIND", "credits": null, "hours": null, "description": "(60-0-4) This elective course offers an engaging introduction to the human mind from a social science perspective, with a strong focus on developing students’ critical thinking and oral communication skills. Through interactive discussions, projects, and presentations, students explore a range of topics. Designed for students at the beginning of their college studies, the course encourages the development of original ideas, thoughtful analysis, and effective communication. Students will apply critical thinking to real-life issues related to human behavior and mental processes.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC1100", "canonical_url": "/centralgatech/courses/psyc-1100", "markdown_url": "/centralgatech/courses/psyc-1100.md" }, { "id": "centralgatech-000930", "code": "PSYC 2101", "title": "| PSYCHOLOGY OF ADJUSTMENT", "credits": null, "hours": null, "description": "This course will introduce you to psychological adjustment, or the process by which people adapt to the demands of everyday life circumstances across the lifespan. Factors that affect adjustment include gender, personality, self-esteem, ability to communicate effectively, health, experience of stress, changes with aging, and coping processes. Factors also include social influence and pressure, relationships with others, career preparation, and work through the stages of life. Students will use this knowledge to actively take charge of their own lives as they adjust to an ever-changing world.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC2101", "canonical_url": "/centralgatech/courses/psyc-2101", "markdown_url": "/centralgatech/courses/psyc-2101.md" }, { "id": "centralgatech-000931", "code": "PSYC 2250", "title": "| ABNORMAL PSYCHOLOGY", "credits": null, "hours": null, "description": "Emphasizes the etiology and treatment considerations of various forms of abnormal behavior. Topics include historical and contemporary approaches to psychopathology; approaches to clinical assessment and diagnosis; understanding and defining classifications and psychological disorders. Prerequisite: PSYC 1101 Radiology Technology ACADEMIC PROGRAMS", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#PSYC2250", "canonical_url": "/centralgatech/courses/psyc-2250", "markdown_url": "/centralgatech/courses/psyc-2250.md" }, { "id": "centralgatech-000932", "code": "RADT 1010", "title": "| INTRODUCTION TO RADIOLOGY", "credits": null, "hours": null, "description": "Introduces a grouping of fundamental principles, practices, and issues common to many specializations in the health care profession. In addition to the essential skills, students explore various delivery systems and related issues. Provides the student with an overview of radiography and patient care. Students will be oriented to the radiographic profession as a whole. Emphasis will be placed on patient care with consideration of both physical and psychological conditions. Introduces a grouping of fundamental principles, practices, and issues common to many specializations in the health care profession. In addition to the essential skills, students explore various delivery systems and related issues. Topics include: ethics, medical and legal considerations, Right to Know Law, professionalism, basic principles of radiation protection, basic principles of exposure, equipment introduction, health care delivery systems, hospital and departmental organization, hospital and technical college affiliation, medical emergencies, pharmacology/contrast agents, media, OR and mobile procedures patient preparation, death and dying, body mechanics/transportation, basic life support/ CPR, and patient care in radiologic sciences. Prerequisite: Program admission, BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1010", "canonical_url": "/centralgatech/courses/radt-1010", "markdown_url": "/centralgatech/courses/radt-1010.md" }, { "id": "centralgatech-000933", "code": "RADT 1030", "title": "| RADIOGRAPHIC PROCEDURES I", "credits": null, "hours": null, "description": "Introduces the knowledge required to perform radiologic procedures applicable to the human anatomy. Emphasis will be placed on the production of quality radiographs, and laboratory experience will demonstrate the application of theoretical principles and concepts. Topics include: introduction to radiographic procedures; positioning terminology; positioning considerations; procedures, anatomy, and topographical anatomy related to body cavities, bony thorax, upper extremities, shoulder girdle; and lower extremities. Prerequisite: Program admission, BIOL 2114, BIOL 2114L Co-requisite: RADT 1010, RADT 1320", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1030", "canonical_url": "/centralgatech/courses/radt-1030", "markdown_url": "/centralgatech/courses/radt-1030.md" }, { "id": "centralgatech-000934", "code": "RADT 1060", "title": "| RADIOGRAPHIC PROCEDURES II", "credits": null, "hours": null, "description": "Continues to develop the knowledge required to perform radiographic procedures. Topics include: anatomy and routine projections of the pelvic girdle; anatomy and routine projections of the spine, gastrointestinal (GI) procedures; genitourinary (GU) procedures; biliary system procedures. Prerequisite: Program admission, Program Instructor Approval, RADT 1010, RADT 1030", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1060", "canonical_url": "/centralgatech/courses/radt-1060", "markdown_url": "/centralgatech/courses/radt-1060.md" }, { "id": "centralgatech-000935", "code": "RADT 1075", "title": "| RADIOGRAPHIC IMAGING", "credits": null, "hours": null, "description": "The content of this course introduces factors that govern and influence the production of the radiographic image using analog and digital radiologic equipment found in diagnostic radiology. Emphasis will be placed on knowledge and techniques required to produce high quality diagnostic radiologic images. Topics include image quality including radiographic density; radiographic contrast, recorded detail, distortion, grids, image receptors and holders (analog and digital), processing considerations (analog and digital); image acquisition (analog, digital, and PACS), image analysis, and image artifacts (analog and digital). Guidelines for selecting exposure factors and evaluating images within a digital system will assist students to bridge between film-based and digital imaging systems. Factors that impact image acquisitions, display, archiving, and retrieval are discussed. Laboratory experiences will demonstrate applications of theoretical principles and concepts. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1075", "canonical_url": "/centralgatech/courses/radt-1075", "markdown_url": "/centralgatech/courses/radt-1075.md" }, { "id": "centralgatech-000936", "code": "RADT 1085", "title": "| RADIOGRAPHIC EQUIPMENT", "credits": null, "hours": null, "description": "Course content establishes a knowledge base in radiographic, fluoroscopic and mobile equipment requirements and design. Instruction also provides a basic knowledge of Automatic Exposure Control (AEC) devices, beam restriction, filtration, quality control, and quality management principles of analog and digital systems. Laboratory experiences will demonstrate applications of theoretical principles and concepts. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1085", "canonical_url": "/centralgatech/courses/radt-1085", "markdown_url": "/centralgatech/courses/radt-1085.md" }, { "id": "centralgatech-000937", "code": "RADT 1200", "title": "| PRINCIPLES OF RADIATION BIOLOGY AND", "credits": null, "hours": null, "description": "PROTECTION (30-0-2) Provides instruction on the principles of cell radiation interaction. Radiation effects on cells and factors affecting cell response are presented. Acute and chronic effects of radiation are discussed. Topics include: radiation detection and measurement; patient protection; personnel protection; absorbed dose equivalencies; agencies and regulations; introduction to radiation biology; cell anatomy, radiation/cell interaction; and effects of radiation. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1200", "canonical_url": "/centralgatech/courses/radt-1200", "markdown_url": "/centralgatech/courses/radt-1200.md" }, { "id": "centralgatech-000938", "code": "RADT 1320", "title": "| CLINICAL RADIOGRAPHY I", "credits": null, "hours": null, "description": "Introduces students to the hospital clinical setting and provides an opportunity for students to participate in or observe radiographic procedures. Topics include: orientation to hospital areas and procedures; orientation to mobile/ surgery; orientation to radiography and fluoroscopy; participation in and/or observation of procedures related to body cavities, the shoulder girdle, and upper extremities. Activities of students are under direct supervision. Prerequisite: Program admission, BIOL 2114, BIOL 2114L", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1320", "canonical_url": "/centralgatech/courses/radt-1320", "markdown_url": "/centralgatech/courses/radt-1320.md" }, { "id": "centralgatech-000939", "code": "RADT 1330", "title": "| CLINICAL RADIOGRAPHY II", "credits": null, "hours": null, "description": "Continues introductory student learning experiences in the hospital setting. Topics include: equipment utilization; exposure techniques; attend to and/or observation of routine projections of the lower extremities, pelvic girdle, and spine; attend to and/or observation of procedures related to the gastrointestinal (GI), genitourinary (GU), and biliary systems; and attend to and/or observation of procedure related to minor radiologic procedures. Execution of radiographic procedures will be conducted under direct and indirect supervision. Prerequisite: Program admission, Program Instructor Approval, RADT 1320", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT1330", "canonical_url": "/centralgatech/courses/radt-1330", "markdown_url": "/centralgatech/courses/radt-1330.md" }, { "id": "centralgatech-000940", "code": "RADT 2090", "title": "| RADIOGRAPHIC PROCEDURES II", "credits": null, "hours": null, "description": "Continues to develop the knowledge required to perform radiographic procedures. Topics include: anatomy and routine projections of the cranium; anatomy and routine projections of the facial bones; anatomy and routine projections of the sinuses, special radiographic procedures, and pathological considerations of the cranium, facial bones, sinuses and special procedures. Prerequisite: Program admission, Program Instructor Approval, RADT 1010, RADT 1030, RADT 1060 ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2090", "canonical_url": "/centralgatech/courses/radt-2090", "markdown_url": "/centralgatech/courses/radt-2090.md" }, { "id": "centralgatech-000941", "code": "RADT 2201", "title": "| INTRODUCTION TO COMPUTED", "credits": null, "hours": null, "description": "TOMOGRAPHY (30-0-2) Introduces the student to computed tomography and patient care in the CT suite. Topics include: the history of computed tomography, patient care and assessment, anatomy, contrast agents, radiation safety and protection, medical ethics and law, cultural diversity, and patient information management. Prerequisite: Program admission Co-requisite: RADT 2220, RADT 2250", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2201", "canonical_url": "/centralgatech/courses/radt-2201", "markdown_url": "/centralgatech/courses/radt-2201.md" }, { "id": "centralgatech-000942", "code": "RADT 2210", "title": "| COMPUTED TOMOGRAPHY PHYSICS AND", "credits": null, "hours": null, "description": "INSTRUMENTATION (75-0-5) Introduces the concepts of basic physics and instrumentation for computed tomography. Topics include: computer concepts, system operation and components, image processing and display, instrumentation, single slice and volume scanning, 3-D volume rendering, image quality and artifacts, radiation protection and quality control. Prerequisite: Program admission Co-requisite: RADT 2230, RADT 2265", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2210", "canonical_url": "/centralgatech/courses/radt-2210", "markdown_url": "/centralgatech/courses/radt-2210.md" }, { "id": "centralgatech-000943", "code": "RADT 2220", "title": "| COMPUTED TOMOGRAPHY PROCEDURES", "credits": null, "hours": null, "description": "I (45-0-3) Provides knowledge CT procedures of the head, chest, abdomen, and pelvis. Topics include: anatomy, pathology, scanning procedures, scanning protocol, contrast administration, and contraindications for computed tomography. Prerequisite: Program admission Co-requisite: RADT 2201, RADT 2250", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2220", "canonical_url": "/centralgatech/courses/radt-2220", "markdown_url": "/centralgatech/courses/radt-2220.md" }, { "id": "centralgatech-000944", "code": "RADT 2230", "title": "| COMPUTED TOMOGRAPHY PROCEDURES", "credits": null, "hours": null, "description": "II (45-0-3) Provides knowledge of anatomy, pathology, scanning protocols, contrast administration, and contraindications for computed tomography of the neck, spine, musculoskeletal system, and special procedures. Post-processing and quality assurance criteria are addressed. Topics include: anatomy, pathology, scanning protocol, contrast administration and contraindications, post processing and quality assurance. Prerequisite: Program admission Co-requisite: RADT 2210, RADT 2265", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2230", "canonical_url": "/centralgatech/courses/radt-2230", "markdown_url": "/centralgatech/courses/radt-2230.md" }, { "id": "centralgatech-000945", "code": "RADT 2250", "title": "| COMPUTED TOMOGRAPHY CLINICAL I", "credits": null, "hours": null, "description": "(0-180-4) Introduces students to the computed tomography department and provides an opportunity for participation in and observation of CT procedures. Students progress toward completion of clinical competency evaluations. Topics include: exam preparation, patient care, equipment utilization, exposure techniques, evaluation of CT procedures, and incorporation of contrast media. Prerequisite: Program admission Co-requisite: RADT 2201, RADT 2220", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2250", "canonical_url": "/centralgatech/courses/radt-2250", "markdown_url": "/centralgatech/courses/radt-2250.md" }, { "id": "centralgatech-000946", "code": "RADT 2260", "title": "| RADIOLOGIC TECHNOLOGY REVIEW", "credits": null, "hours": null, "description": "(45-0-3) Provides a review of basic knowledge from previous courses and helps the student prepare for national certification examinations for radiographers. Topics include: image production and evaluation; radiographic procedures; anatomy, physiology, pathology, and terminology; equipment operation and quality control; radiation protection; and patient care and education. Prerequisite: Program admission", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2260", "canonical_url": "/centralgatech/courses/radt-2260", "markdown_url": "/centralgatech/courses/radt-2260.md" }, { "id": "centralgatech-000947", "code": "RADT 2340", "title": "| CLINICAL RADIOGRAPHY III", "credits": null, "hours": null, "description": "Provides students with continued hospital setting work experience. Students continue to develop proficiency in executing procedures introduced in Radiographic Procedures. Topics include: patient care; behavioral and social competencies; performance and/or observation of minor special procedures, special equipment use, and participation in and/or observation of cranial and facial radiography. Execution of radiographic procedures will be conducted under direct and indirect supervision. Prerequisite: Program admission, RADT 1320, RADT 1030 Co-requisite: RADT 2090", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RADT2340", "canonical_url": "/centralgatech/courses/radt-2340", "markdown_url": "/centralgatech/courses/radt-2340.md" }, { "id": "centralgatech-000948", "code": "RELM 2020", "title": "| RECREATION LEADERSHIP AND", "credits": null, "hours": null, "description": "SUPERVISION (45-0-3) This course provides theories and techniques in leadership, group dynamics, and personnel management as they relate to programming and staff supervision in recreation agencies. Emphasis is on personnel management techniques, including job analysis, recruitment and career development.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2020", "canonical_url": "/centralgatech/courses/relm-2020", "markdown_url": "/centralgatech/courses/relm-2020.md" }, { "id": "centralgatech-000949", "code": "RELM 2030", "title": "| SPORTS AND FITNESS FACILITY", "credits": null, "hours": null, "description": "MANAGEMENT AND DESIGN (45-0-3) ACADEMIC PROGRAMS This course provides students with learning experiences in the administrative tasks of planning and designing new recreational facilities, and renovating and maintaining existing sports and fitness facilities.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2030", "canonical_url": "/centralgatech/courses/relm-2030", "markdown_url": "/centralgatech/courses/relm-2030.md" }, { "id": "centralgatech-000950", "code": "RELM 2040", "title": "| PROGRAM PLANNING IN SPORTS AND", "credits": null, "hours": null, "description": "FITNESS (30-30-3) This course provides practical knowledge and experiences in the essential elements and design concepts of program planning. Emphasis is placed on student involvement in planning and directing programs for diverse populations in a variety of settings.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2040", "canonical_url": "/centralgatech/courses/relm-2040", "markdown_url": "/centralgatech/courses/relm-2040.md" }, { "id": "centralgatech-000951", "code": "RELM 2042", "title": "| BEGINNING TENNIS", "credits": null, "hours": null, "description": "This course provides students with the basic knowledge, techniques and skills for tennis which prepares them to participate in an activity that promotes a healthy and active lifestyle.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2042", "canonical_url": "/centralgatech/courses/relm-2042", "markdown_url": "/centralgatech/courses/relm-2042.md" }, { "id": "centralgatech-000952", "code": "RELM 2043", "title": "| WEIGHT TRAINING", "credits": null, "hours": null, "description": "This course provides students with the basic knowledge, techniques and skills for weight training which prepares them to participate in an activity that promotes healthy and active lifestyles.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2043", "canonical_url": "/centralgatech/courses/relm-2043", "markdown_url": "/centralgatech/courses/relm-2043.md" }, { "id": "centralgatech-000953", "code": "RELM 2044", "title": "| OFFICIATING SPORTS", "credits": null, "hours": null, "description": "This course provides students with the basic competencies, techniques, and skills necessary to officiate sports.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2044", "canonical_url": "/centralgatech/courses/relm-2044", "markdown_url": "/centralgatech/courses/relm-2044.md" }, { "id": "centralgatech-000954", "code": "RELM 2045", "title": "| BEGINNING GOLF", "credits": null, "hours": null, "description": "This course provides students with the basic knowledge, techniques and skills which prepares them to participate in an activity that promotes healthy and active lifestyles.", "prerequisites": [], "program_ids": [ "centralgatech-001148", "centralgatech-001149" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RELM2045", "canonical_url": "/centralgatech/courses/relm-2045", "markdown_url": "/centralgatech/courses/relm-2045.md" }, { "id": "centralgatech-000955", "code": "RNSG 1032", "title": "| FOUNDATIONS OF NURSING CARE", "credits": null, "hours": null, "description": "(60-150-8) This course introduces students to the concepts and nursing skills which proved the foundation for nursing theory and practice. Concepts related to physiological and psychosocial needs, growth and development, stress, and adaptation, the nursing process and the roles of the associate degree nurse are introduced. Other concepts that will be studied are communication ethical and legal implications for nursing practice, nursing skills, cultural diversity, the teaching- learning process, nutrition, pharmacology, and critical thinking. A major focus of this course is the identification of the principles of nursing care which meet the physiological and psychosocial needs of culturally diverse clients from older child through later maturity. The student gains experience in the performance of beginning nursing skills in the skills, simulation, and clinical laboratories. The in the skills lab setting, the student practices and return demonstrates the foundational skills needed to provide care for needs of clients. In the simulation and clinical setting, the student is assisted to utilize the nursing process to meet the physiological and psychosocial needs of adult clients who require assistance with basic needs and then later in the semester the students will attend clinical in the hospital setting. The development of assessment skills is emphasized. The student utilizes communication techniques with faculty, staff, and interdisciplinary team members regarding care of assig", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG1032", "canonical_url": "/centralgatech/courses/rnsg-1032", "markdown_url": "/centralgatech/courses/rnsg-1032.md" }, { "id": "centralgatech-000956", "code": "RNSG 1034", "title": "| PHARMACOLOGY FOR NURSING", "credits": null, "hours": null, "description": "This course provides an introduction to nursing pharmacology that integrates the concepts of physiology, pathophysiology, chemistry, and nursing fundamentals to build a foundation for administering drug therapy to patients. Using a simple to complex approach, key content areas are presented to help conceptualize the important components related to nursing pharmacology. Incorporated into this course are major principles of mathematics such as ratio-proportion, fractions, decimals, and conversion between the various systems of weights and measures. Students will learn how to competently prepare and administer medications including oral, subcutaneous, intradermal, intramuscular, intravenous formulas and injections, and reconstitution of solutions. The basic concepts of pharmacology, such as drug testing and approval, pharmacokinetics and pharmacodynamics, therapeutic and toxic effects, dosage calculations, and challenges related to drug therapy, provide the foundation from which drug therapy associated with specific body systems can be addressed. Discussion of the major drug groups focuses on therapeutic actions and indications, pharmacokinetics, contraindications and cautions, adverse effects, clinically important drug-to-drug interactions and nursing considerations which emphasize the nursing process and focus on patient care and teaching. Prototypes of the major drug groups are emphasized. Lifespan considerations, evidence for best practice, patient safety, and critical think", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG1034", "canonical_url": "/centralgatech/courses/rnsg-1034", "markdown_url": "/centralgatech/courses/rnsg-1034.md" }, { "id": "centralgatech-000957", "code": "RNSG 1036", "title": "| HEALTH AND ILLNESS I", "credits": null, "hours": null, "description": "This course is a study of the nursing care of culturally diverse clients from young adulthood through later maturity. Emphasis is placed on the concepts of acid-base, metabolism, cellular regulation, oxygenation, infection, mobility, stress/ coping, health-wellness-illness, communication, caring interventions, managing care, safety, quality improvement, and informatics. Upon completion, students will be able to provide safe nursing care incorporating the concepts identified in this course. Prerequisite: RNSG 1032, RNSG 1034 Co-requisite: BIOL 2117, BIOL 2117L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG1036", "canonical_url": "/centralgatech/courses/rnsg-1036", "markdown_url": "/centralgatech/courses/rnsg-1036.md" }, { "id": "centralgatech-000958", "code": "RNSG 1038", "title": "| TRANSITION TO ASSOCIATE DEGREE", "credits": null, "hours": null, "description": "NURSING (60-75-6) This course provides theoretical and clinical knowledge foundations to transition licensed practical or vocational nurses (LPN/LVN) and certified paramedics into the concept- based Associate of Applied Science in Nursing Degree program. Emphasis is placed on establishing core concepts, roles/responsibilities of the RN, critical thinking/clinical judgment, focuses on adult clients experiencing selected ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE health alterations in diverse populations, and professionalism in a variety of settings. Competency exams and skills checks will be utilized to apply credit to modules/units. Prerequisite: Program Admission, BIOL 2114, BIOL 2114L,", "prerequisites": [ "BIOL 2114", "BIOL 2114L" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG1038", "canonical_url": "/centralgatech/courses/rnsg-1038", "markdown_url": "/centralgatech/courses/rnsg-1038.md" }, { "id": "centralgatech-000959", "code": "RNSG 2032", "title": "| HEALTH AND ILLNESS II", "credits": null, "hours": null, "description": "This course is designed to further the concepts of Health and Illness I. Emphasis is place on the concepts of cellular regulation, perfusion, infection, mobility, immunity, comfort, behaviors, health-wellness-illness, clinical decision-making, caring interventions, and safety. Upon completion, students will be able to provide safe nursing care incorporating the concepts identified in this course. Prerequisite: BIOL 2117, BIOL 2117L, RNSG 1036 Co-requisite: PSYC 2103, RNSG 2034", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG2032", "canonical_url": "/centralgatech/courses/rnsg-2032", "markdown_url": "/centralgatech/courses/rnsg-2032.md" }, { "id": "centralgatech-000960", "code": "RNSG 2034", "title": "| FAMILY NURSING", "credits": null, "hours": null, "description": "This course is designed to prepare the student to provide care for the childbearing client, family and the pediatric client. Emphasis is place on the concepts of normal pregnancy and childbirth, complications in pregnancy and childbirth, oxygenation, sexuality, grief/loss, mood/affect, development, family, health-wellness-illness such as nutrition, patient education, and health promotion, communication, safety, and advocacy. Upon completion, students should be able to provide safe nursing care incorporating the concepts identified in this course. Prerequisite: BIOL 2117, BIOL 2117L, RNSG 1036 Co-requisite: PSYC 2103, RNSG 2032", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG2034", "canonical_url": "/centralgatech/courses/rnsg-2034", "markdown_url": "/centralgatech/courses/rnsg-2034.md" }, { "id": "centralgatech-000961", "code": "RNSG 2036", "title": "| HEALTH AND ILLNESS III", "credits": null, "hours": null, "description": "This course is designed to expand and integrate the concepts from RNSG 1036 and RNSG 2032 . Emphasis is place on the concepts of fluid/electrolytes, metabolism, perfusion, mobility, stress/coping, health-wellness-illness, caring interventions, managing care, and quality improvement. Upon completion, students should be able to demonstrate the knowledge, skills, and attitudes necessary to provide quality, individualized, entry-level nursing care. Prerequisite: RNSG 2032, RNSG 2034 Co-requisite: RNSG 2038", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#RNSG2036", "canonical_url": "/centralgatech/courses/rnsg-2036", "markdown_url": "/centralgatech/courses/rnsg-2036.md" }, { "id": "centralgatech-000962", "code": "SCMA 1000", "title": "| INTRODUCTION TO SUPPLY CHAIN", "credits": null, "hours": null, "description": "MANAGEMENT (45-0-3) Provides a general knowledge of Supply Chain Management (SCM) and the associated functions necessary for delivery goods and services to customers. The course will focus on what employees and managers must do to ensure an effective Supply Chain exists in their organization. Topics include: Introduction to SCM, E-Commerce, Material Management, Information Technology, Measuring SCM performance, Purchasing and Distribution, and Research and Case Studies. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001140", "centralgatech-001141", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1000", "canonical_url": "/centralgatech/courses/scma-1000", "markdown_url": "/centralgatech/courses/scma-1000.md" }, { "id": "centralgatech-000963", "code": "SCMA 1001", "title": "| INVENTORY CONTROL PROCEDURES", "credits": null, "hours": null, "description": "(45-0-3) This course provides the student with the knowledge and skills necessary for successful control of a company’s inventory. Emphasis will be placed on inventory methods and control systems, physical inventories, prevention of shortages, and how current technology can assist the manager in inventory planning and control. Topics include: systems, area of management attending, economic order quantities, ABC analysis, MRP , bar coding, physical inventory, and cycle counting. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001140", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1001", "canonical_url": "/centralgatech/courses/scma-1001", "markdown_url": "/centralgatech/courses/scma-1001.md" }, { "id": "centralgatech-000964", "code": "SCMA 1003", "title": "| INTRODUCTION TO TRANSPORTATION", "credits": null, "hours": null, "description": "AND LOGISTICS MANAGEMENT (45-0-3) Businesses today cannot be competitive without a good transportation and logistics network. This course introduces the five basic forms of transportation and provides an understanding of the economic fundamentals underlying each mode. Students then discuss ways in which today’s supply chain manager can use these transportation modes to achieve efficiencies and cost effectiveness necessary for a company to survive in today’s global markets.", "prerequisites": [], "program_ids": [ "centralgatech-001141" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1003", "canonical_url": "/centralgatech/courses/scma-1003", "markdown_url": "/centralgatech/courses/scma-1003.md" }, { "id": "centralgatech-000965", "code": "SCMA 1008", "title": "| SUPPLY CHAIN MANAGEMENT OBI I", "credits": null, "hours": null, "description": "(0-45-1) This course introduces students to the application and reinforcement of distribution and employability principles in an actual job placement or practicum experience. Students are acquainted with occupational responsibilities through realistic work situations and are provided with insights into management applications on the job. Topics include problem solving, adaptability to the job, use of proper interpersonal skills, application of distribution management techniques, and professional development. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1008", "canonical_url": "/centralgatech/courses/scma-1008", "markdown_url": "/centralgatech/courses/scma-1008.md" }, { "id": "centralgatech-000966", "code": "SCMA 1009", "title": "| SUPPLY CHAIN MANAGEMENT OBI II", "credits": null, "hours": null, "description": "(0-45-1) This course continues the application and reinforcement of distribution and employability principles in an actual job placement or practicum experience. Students are acquainted with occupational responsibilities through realistic work situations and are provided with insights into management applications on the job. Topics include problem solving, adaptability to the job, use of proper interpersonal skills, application of distribution management techniques, and professional development. Prerequisite: SCMA 1008", "prerequisites": [ "SCMA 1008" ], "program_ids": [ "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1009", "canonical_url": "/centralgatech/courses/scma-1009", "markdown_url": "/centralgatech/courses/scma-1009.md" }, { "id": "centralgatech-000967", "code": "SCMA 1015", "title": "| E-COMMERCE IN SUPPLY CHAIN", "credits": null, "hours": null, "description": "MANAGEMENT (45-0-3) Provides a general knowledge of E-Commerce (EC) and how it is being conducted and managed as well as assessing its major opportunities, limitations, issues, and risks. The course will focus on the impact EC has on a significant portion of the world, affecting businesses, supply chains, professions, and people. EC is more than just buying and selling, and students will learn it is also about electronically communicating, collaborating, sharing of information by businesses, and discovering information. Prerequisite: Program Admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001141" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1015", "canonical_url": "/centralgatech/courses/scma-1015", "markdown_url": "/centralgatech/courses/scma-1015.md" }, { "id": "centralgatech-000968", "code": "SCMA 1050", "title": "| TRAFFIC MANAGEMENT", "credits": null, "hours": null, "description": "This course introduces the student to traffic management in industry. Topics include freight regulations, rates, classifications and documents, principles of managing traffic operations in a distribution center environment, international distribution, and hazardous material distribution. Prerequisite: Program admission", "prerequisites": [], "program_ids": [ "centralgatech-001137", "centralgatech-001138" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA1050", "canonical_url": "/centralgatech/courses/scma-1050", "markdown_url": "/centralgatech/courses/scma-1050.md" }, { "id": "centralgatech-000969", "code": "SCMA 2103", "title": "| SUPPLY CHAIN MANAGEMENT", "credits": null, "hours": null, "description": "Logistics and Supply Chain Management today represents a great challenge as well as a tremendous opportunity for most firms. This course will view the supply chain from the point of view of a front-line supervisor. Logistics and Supply Chain Management is all about managing hand-offs in a supply chain, hand-offs of either information or product. Phrases like logistics management, supply chain management and demand chain management will be used interchangeably in order to provide an understanding on how logistical decisions impact the performance of the firm as well as the entire supply chain. Prerequisite: SCMA 1003", "prerequisites": [ "SCMA 1003" ], "program_ids": [ "centralgatech-001137", "centralgatech-001138", "centralgatech-001142", "centralgatech-001143" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SCMA2103", "canonical_url": "/centralgatech/courses/scma-2103", "markdown_url": "/centralgatech/courses/scma-2103.md" }, { "id": "centralgatech-000970", "code": "SFMA 1210", "title": "| CERTIFIED PERSONAL TRAINING I", "credits": null, "hours": null, "description": "This course covers general anatomy, joint and muscle function, as well as the analysis of body movements. The course is designed to prepare and qualify students to work as personal trainers. Students learn how to: properly screen and evaluate clients for safe participation in an exercise program. Design and implement exercise prescriptions for multiple ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE populations and successful client goal attainment. Prerequisite: Program Admission Co-requisite: ALHS 1011, ALHS 1040", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SFMA1210", "canonical_url": "/centralgatech/courses/sfma-1210", "markdown_url": "/centralgatech/courses/sfma-1210.md" }, { "id": "centralgatech-000971", "code": "SOCW 2000", "title": "| INTRODUCTION TO SOCIAL WORK", "credits": null, "hours": null, "description": "0-3) This course provides an introduction to social welfare institution and the profession of social work. It focuses on the values, ethics, and methods of generalist social work practice with an emphasis on diversity. Students will be introduced to basic social welfare policies, community agencies, and at-risk populations.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SOCW2000", "canonical_url": "/centralgatech/courses/socw-2000", "markdown_url": "/centralgatech/courses/socw-2000.md" }, { "id": "centralgatech-000972", "code": "SOCW 2010", "title": "| INTRODUCTION TO CASE MANAGEMENT", "credits": null, "hours": null, "description": "(45-0-3) A practical course in the how to of human service case management. Students will learn the step-by-step process of case management from the initial referral for services, determination of eligibility for services, writing a formal plan for services, case documentation techniques, and techniques for monitoring a client’s progress through the service delivery system, to case closure/follow-up activities. This course will include how to access community resources, how to interpret and utilize information from other professionals, and the development of interviewing, intervention, case recording, and caseload management skills. Legal and ethical issues in service delivery will also be discussed.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SOCW2010", "canonical_url": "/centralgatech/courses/socw-2010", "markdown_url": "/centralgatech/courses/socw-2010.md" }, { "id": "centralgatech-000973", "code": "SPAN 1101", "title": "| INTRODUCTION TO SPANISH LANGUAGE", "credits": null, "hours": null, "description": "AND CULTURE I (45-0-3) A beginner’s introduction to the Spanish language and culture. This course stresses the student’s ability to acquire a non-native language and to communicate effectively in the target Spanish language. Emphasis is placed on reading, writing, and speaking the language. An overview of Hispanic society is also emphasized, highlighting the differences between American and Hispanic cultures. Prerequisite: Appropriate placement test score", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SPAN1101", "canonical_url": "/centralgatech/courses/span-1101", "markdown_url": "/centralgatech/courses/span-1101.md" }, { "id": "centralgatech-000974", "code": "SURG 1010", "title": "| INTRODUCTION TO SURGICAL", "credits": null, "hours": null, "description": "TECHNOLOGY (60-150-8) Provides an overview of the Surgical Technology profession and develops the fundamental concepts and principles necessary to successfully participate on a surgical team. Topics include: introduction to preoperative, intraoperative and postoperative principles of surgical technology; assistant circulator role, professionalism as well as health care facility information. (There are surgical procedures that are similar as far as procedural steps, instrumentation, supplies, patient position, etc. This is referred to as the “Co-Related Procedures Concept.” The purpose of using the Co-Related Procedures Concept is to provide the instructor additional time to teach surgical procedures as well as avoid repetition.) Prerequisite: Program admission, ALHS 1090, BIOL 2114,", "prerequisites": [ "ALHS 1090", "BIOL 2114" ], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG1010", "canonical_url": "/centralgatech/courses/surg-1010", "markdown_url": "/centralgatech/courses/surg-1010.md" }, { "id": "centralgatech-000975", "code": "SURG 1020", "title": "| PRINCIPLES OF SURGICAL TECHNOLOGY", "credits": null, "hours": null, "description": "(75-180-9) Provides continued study of surgical team participation by wound management and technological sciences for the operating room. Topics include: technological sciences; ACADEMIC PROGRAMS patient care concepts; preoperative, intraoperative and postoperative surgical technology; and perioperative case management. (There are surgical procedures that are similar as far as procedural steps, instrumentation, supplies, patient position, etc. This is referred to as the “Co-Related Procedures Concept.” The purpose of using the Co-Related Procedures Concept is to provide the instructor additional time to teach surgical procedures as well as avoid repetition.) Prerequisite: Program admission Corequisite: SURG 1010", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG1020", "canonical_url": "/centralgatech/courses/surg-1020", "markdown_url": "/centralgatech/courses/surg-1020.md" }, { "id": "centralgatech-000976", "code": "SURG 1100", "title": "| SURGICAL PHARMACOLOGY", "credits": null, "hours": null, "description": "Introduces the fundamentals of intraoperative pharmacology, and emphasizes concepts of anesthesia administration. Topics include: weights and measurements, drug conversions, interpretation of drug orders, legal aspects of drug administration, intraoperative pharmacologic agents, and anesthesia fundamentals. Prerequisite: Program admission Corequisite: SURG 2030, SURG 2110, SURG 2120", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG1100", "canonical_url": "/centralgatech/courses/surg-1100", "markdown_url": "/centralgatech/courses/surg-1100.md" }, { "id": "centralgatech-000977", "code": "SURG 2040", "title": "| SURGICAL PROCEDURES II", "credits": null, "hours": null, "description": "Introduces the surgical specialties to include Oral and Maxillofacial Surgery, Plastic and Reconstructive Surgery, Ophthalmic (Eye) Surgery, Cardiothoracic Surgery, Peripheral Vascular Surgery and Neurosurgery. Topics for each surgical specialty will include Anatomy and Physiology, Pathophysiology, Diagnostic Interventions, and the Surgical Procedure. Prerequisite: Program Admission, SURG 2030 Corequisite: SURG 2130, SURG 2140, SURG 2240", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2040", "canonical_url": "/centralgatech/courses/surg-2040", "markdown_url": "/centralgatech/courses/surg-2040.md" }, { "id": "centralgatech-000978", "code": "SURG 2110", "title": "| SURGICAL TECHNOLOGY CLINICAL I", "credits": null, "hours": null, "description": "(0-135-3) Orients students to the clinical environment and provides experience with basic skills necessary to the surgical technologist. Topics include, but are not limited to: scrubbing, gowning, gloving, and draping; assistance with patient care; processing of instruments and supplies; maintenance of a sterile field; and environmental sanitation. In addition, introduces the development of surgical team participation through clinical experience. Emphasis is placed on observation and/or participation in routine procedures for core and specialty surgery. Topics include: general surgery (to include gastrointestinal), cardiothoracic surgery, otorhinolaryngologic surgery ENT), ophthalmic surgery (Eye), genitourinary surgery, neurological surgery, obstetrical and gynecological surgery, oral and maxillofacial surgery, orthopedic surgery, peripheral vascular surgery, plastic and reconstructive surgery, and procurement/transplant surgery. The total number of cases the student must complete is 120. Students are required to complete 30 cases in the General Surgery specialty. Twenty of the cases must be in the First Scrub Role. Students are required to complete 90 cases in various surgical specialties. Sixty of the cases must be in the First Scrub Role and evenly distributed between a minimum of 5 surgical specialties. However, 15 is the maximum number of cases that can be counted in any one surgical specialty. Diagnostic endoscopy cases and vaginal delivery cases are not mandatory, but", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2110", "canonical_url": "/centralgatech/courses/surg-2110", "markdown_url": "/centralgatech/courses/surg-2110.md" }, { "id": "centralgatech-000979", "code": "SURG 2120", "title": "| SURGICAL TECHNOLOGY CLINICAL II", "credits": null, "hours": null, "description": "(0-135-3) Orients students to the clinical environment and provides experience with basic skills necessary to the surgical technologist. Topics include scrubbing, gowning, gloving, and draping, assistance with patient care, processing of instruments and supplies, maintenance of a sterile field and environmental sanitation. In addition, introduces the development of surgical team participation through clinical experience. Emphasis is placed on observation/participation in routine procedures and procedures for core and specialty surgery. Topics include general surgery, gastrointestinal surgery, obstetrical and gynecological surgery, genitourinary surgery, otorhinolaryngologic surgery, plastic and reconstructive surgery, orthopedic surgery, ophthalmic surgery, oral and maxillofacial surgery, cardiothoracic surgery, peripheral vascular surgery, and neurosurgical procedures. Utilization of minutes allotted to specialty areas are at the discretion of the program. Prerequisite: Program Admission, SURG 1010, SURG 1020 Corequisite: SURG 1100, SURG 2030, SURG 2110", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2120", "canonical_url": "/centralgatech/courses/surg-2120", "markdown_url": "/centralgatech/courses/surg-2120.md" }, { "id": "centralgatech-000980", "code": "SURG 2130", "title": "| SURGICAL TECHNOLOGY CLINICAL III", "credits": null, "hours": null, "description": "(0-135-3) Orients students to the clinical environment and provides experience with basic skills necessary to the surgical technologist. Topics include scrubbing, gowning, gloving, and draping, assistance with patient care, processing of instruments and supplies, maintenance of a sterile field and environmental sanitation. In addition, introduces the development of surgical team participation through clinical experience. Emphasis is placed on observation/participation in routine procedures and procedures for core and specialty surgery. Topics include general surgery, gastrointestinal surgery, obstetrical and gynecological surgery, genitourinary surgery, otorhinolaryngologic surgery, plastic and reconstructive surgery, orthopedic surgery, ophthalmic surgery, oral and maxillofacial surgery, cardiothoracic surgery, peripheral vascular surgery, and neurosurgical procedures. Utilization of minutes allotted to specialty areas are at the discretion of the program. Prerequisite: Program admission, SURG 2110, SURG 2120 Corequisite: SURG 2040, SURG 2140, SURG 2240", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2130", "canonical_url": "/centralgatech/courses/surg-2130", "markdown_url": "/centralgatech/courses/surg-2130.md" }, { "id": "centralgatech-000981", "code": "SURG 2140", "title": "| SURGICAL TECHNOLOGY CLINICAL IV", "credits": null, "hours": null, "description": "105-4) Orients students to the clinical environment and provides experience with basic skills necessary to the surgical technologist. Topics include scrubbing, gowning, gloving, and draping, assistance with patient care, processing of instruments and supplies, maintenance of a sterile field and environmental sanitation. In addition, introduces the development of surgical team participation through clinical experience. Emphasis is placed on observation/participation in routine procedures and procedures for core and specialty surgery. Topics include general surgery, gastrointestinal surgery, obstetrical and gynecological surgery, genitourinary surgery, otorhinolaryngologic surgery, plastic and reconstructive surgery, orthopedic surgery, ophthalmic surgery, oral and maxillofacial surgery, cardiothoracic surgery, peripheral vascular surgery, and neurosurgical procedures. ACADEMIC PROGRAMS CENTRAL GEORGIA TECHNICAL COLLEGE Utilization of minutes allotted to specialty areas are at the discretion of the program. Prerequisite: Program admission, SURG 2110, SURG 2120 Corequisite: SURG 2040, SURG 2130, SURG 2240", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#SURG2140", "canonical_url": "/centralgatech/courses/surg-2140", "markdown_url": "/centralgatech/courses/surg-2140.md" }, { "id": "centralgatech-000982", "code": "VETT 1060", "title": "ANIMAL ANATOMY AND PHYSIOLOGY", "credits": null, "hours": null, "description": "(45-45-4) Provides an overview of the functional anatomy and physiology of domestic animals commonly encountered in veterinary medicine. Topics include: musculoskeletal system, digestive system, cardiovascular system, integumentary system, hematopoietic system, respiratory system, urogenital system, nervous system, endocrine system and the special senses. Prerequisite: Regular Admission Co-requisites: Program Admission, BIOL 1111, BIOL 1111L", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#VETT1060", "canonical_url": "/centralgatech/courses/vett-1060", "markdown_url": "/centralgatech/courses/vett-1060.md" }, { "id": "centralgatech-000983", "code": "VETT 1107", "title": "INTRODUCTION TO EQUINE CARE", "credits": null, "hours": null, "description": "This course will provide an introduction to equine care. Emphasis is placed on office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout. Topics include: office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#VETT1107", "canonical_url": "/centralgatech/courses/vett-1107", "markdown_url": "/centralgatech/courses/vett-1107.md" }, { "id": "centralgatech-000984", "code": "VETT 1108", "title": "INTRODUCTION TO CANINE CARE", "credits": null, "hours": null, "description": "This course will provide an introduction to canine care. Emphasis is placed on office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout. Topics include: office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#VETT1108", "canonical_url": "/centralgatech/courses/vett-1108", "markdown_url": "/centralgatech/courses/vett-1108.md" }, { "id": "centralgatech-000985", "code": "VETT 1109", "title": "INTRODUCTION TO SMALL ANIMAL CARE", "credits": null, "hours": null, "description": "(30-60-4) This course will provide an introduction to small animal care. Emphasis is placed on office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout. Topics include: office procedures, care and nutrition, behaviors, handling and restraint, preventive medicine, and facilities design & layout.", "prerequisites": [], "program_ids": [], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#VETT1109", "canonical_url": "/centralgatech/courses/vett-1109", "markdown_url": "/centralgatech/courses/vett-1109.md" }, { "id": "centralgatech-000986", "code": "WELD 1000", "title": "| INTRODUCTION TO WELDING", "credits": null, "hours": null, "description": "TECHNOLOGY (45-45-4) Provides an introduction to welding technology with an emphasis on basic welding laboratory principles and operating procedures. Topics include: industrial safety and health practices, hand tool and power machine use, measurement, oxyacetylene welding, and welding career potentials.", "prerequisites": [], "program_ids": [ "centralgatech-001076", "centralgatech-001082", "centralgatech-001084", "centralgatech-001085", "centralgatech-001086", "centralgatech-001087" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1000", "canonical_url": "/centralgatech/courses/weld-1000", "markdown_url": "/centralgatech/courses/weld-1000.md" }, { "id": "centralgatech-000987", "code": "WELD 1010", "title": "| OXYFUEL AND PLASMA CUTTING", "credits": null, "hours": null, "description": "(45-45-4) Co-requisite: WELD 1000 Introduction to Welding Technology Introduces fundamental principles, safety practices, equipment, and techniques necessary for metal heating, oxyfuel cutting, and plasma cutting. Topics include: metal heating and cutting techniques, manual and automatic oxyfuel cutting techniques, oxyfuel pipe cutting, plasma torch and theory, plasma machine set up and operation, and plasma cutting techniques. Co-requisite: WELD 1000", "prerequisites": [], "program_ids": [ "centralgatech-001082", "centralgatech-001084", "centralgatech-001085", "centralgatech-001086", "centralgatech-001087" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1010", "canonical_url": "/centralgatech/courses/weld-1010", "markdown_url": "/centralgatech/courses/weld-1010.md" }, { "id": "centralgatech-000988", "code": "WELD 1030", "title": "| BLUEPRINT READING FOR WELDING", "credits": null, "hours": null, "description": "TECHNOLOGY (45-45-4) Co-requisite: WELD 1000 Introduction to Welding Technology This course introduces the knowledge and skills necessary for reading welding and related blueprints and sketches. An emphasis is placed on identifying types of welds, and the associated abbreviations and symbols. Co-requisite: WELD 1000", "prerequisites": [], "program_ids": [ "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1030", "canonical_url": "/centralgatech/courses/weld-1030", "markdown_url": "/centralgatech/courses/weld-1030.md" }, { "id": "centralgatech-000989", "code": "WELD 1050", "title": "| HORIZONTAL SHIELDED METAL ARC", "credits": null, "hours": null, "description": "WELDING (45-45-4) Introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in the horizontal position. Qualification tests, horizontal position, are used in the evaluation of student progress toward making industrial standard welds. Topics include: horizontal SMAW safety and health practices, selection and applications of electrodes, selection and applications for horizontal SMAW, horizontal SMAW joints, and horizontal SMAW to specification. Prerequisite: WELD 1000", "prerequisites": [ "WELD 1000" ], "program_ids": [ "centralgatech-001082", "centralgatech-001083", "centralgatech-001087", "centralgatech-001089" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1050", "canonical_url": "/centralgatech/courses/weld-1050", "markdown_url": "/centralgatech/courses/weld-1050.md" }, { "id": "centralgatech-000990", "code": "WELD 1095", "title": "| ADVANCED GAS METAL ARC WELDING", "credits": null, "hours": null, "description": "(30-45-3) Provides knowledge of theory, safety practices, inert gas, equipment, and techniques required for successful advanced gas metal arc welding (GMAW). Qualification tests, in all positions, are used in the evaluation of student progress toward making advanced level industrial standard welds. Topics include: GMAW safety and health practices; shielding gases; metal cleaning procedures; GMAW machines and equipment set up; selection of filler rods; GMAW weld positions; and advanced production of GMAW beads, bead patterns, and joints. Prerequisite: WELD 1000", "prerequisites": [ "WELD 1000" ], "program_ids": [ "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1095", "canonical_url": "/centralgatech/courses/weld-1095", "markdown_url": "/centralgatech/courses/weld-1095.md" }, { "id": "centralgatech-000991", "code": "WELD 1120", "title": "| PREPARATION FOR INDUSTRIAL", "credits": null, "hours": null, "description": "QUALIFICATION (45-45-4) Introduces industrial qualification methods, procedures, and requirements. Students are prepared to meet the qualification criteria of selected national welding codes and standards. Topics include: test methods and procedures, national codes and standards, fillet and groove weld specimens, and preparation for qualifications and job entry. Prerequisite: WELD 1000", "prerequisites": [ "WELD 1000" ], "program_ids": [ "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1120", "canonical_url": "/centralgatech/courses/weld-1120", "markdown_url": "/centralgatech/courses/weld-1120.md" }, { "id": "centralgatech-000992", "code": "WELD 1150", "title": "| ADVANCED GAS TUNGSTEN ARC", "credits": null, "hours": null, "description": "WELDING (30-45-3) Provides knowledge of theory, safety practices, inert gas, equipment, and techniques required for successful advanced gas tungsten arc welding (GTAW). Qualification tests, all positions, are used in the evaluation of student progress toward making advanced level industrial standard welds. Topics include: GTAW safety and health practices, shielding gases, metal cleaning procedures, GTAW machines and equipment set up, selection of filler rods, GTAW weld positions, and advanced production of GTAW beads, bead patterns, and joints. Prerequisite: WELD 1000", "prerequisites": [ "WELD 1000" ], "program_ids": [ "centralgatech-001082", "centralgatech-001088" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1150", "canonical_url": "/centralgatech/courses/weld-1150", "markdown_url": "/centralgatech/courses/weld-1150.md" }, { "id": "centralgatech-000993", "code": "WELD 1151", "title": "| FABRICATION PROCESSES", "credits": null, "hours": null, "description": "Presents practices common in the welding and metal fabrication industry. Topics include: metal fabrication safety and health practices and metal fabrication procedures. Prerequisite: WELD 1030", "prerequisites": [ "WELD 1030" ], "program_ids": [ "centralgatech-001082", "centralgatech-001088" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1151", "canonical_url": "/centralgatech/courses/weld-1151", "markdown_url": "/centralgatech/courses/weld-1151.md" }, { "id": "centralgatech-000994", "code": "WELD 1156", "title": "| ORNAMENTAL IRON WORKS", "credits": null, "hours": null, "description": "Provides an introduction to ornamental ironworks with emphasis on safety practices, equipment and ornamental ironwork techniques. Topics include: introduction to ornamental ironworks and safety practices, use of scroll machine, and use of bar twister. Prerequisite: WELD 1000", "prerequisites": [ "WELD 1000" ], "program_ids": [ "centralgatech-001082" ], "source_url": "https://www.centralgatech.edu/wp-content/uploads/pdfs/catalog/Catalog_25-26.pdf#WELD1156", "canonical_url": "/centralgatech/courses/weld-1156", "markdown_url": "/centralgatech/courses/weld-1156.md" } ]